Pioneer 2000 Watt 5 Channel Amplifier Unboxing | GM-D9705
HTML-код
- Опубликовано: 30 июл 2024
- Amplifier linked in the description below!
Watch an unboxing of the Pioneer 5 Channel Amplifier Amplifier GM-D9705 that can power either 3 or 5 speakers, depending on your system needs. This is a very versatile amplifier that allows you to power multiple speakers without taking up a ton of space.
Click here to purchase this amplifier (Amazon Associate Paid Link):
amzn.to/3rpyDBR
Recommended Amplifier wiring kit (Amazon Associate Paid Link):
amzn.to/34QaiuB
Disclosure: As an Amazon Associate I earn from qualifying purchases
See where this amp is installed on a Ford F150:
• 2015 - 2020 Ford F150 ...
If you have any questions, leave a comment below! Be sure to like and subscribe!
*5 Channel Champion Series Class D Amplifier w/ Wired Bass Boost Remote
*Max Power Rating:
--4 ohms: 150 watts x 4 chan. + 700 watts x 1 chan.
--2 ohms: 200 watts x 4 chan. + 1200 watts x 1 chan.
--Bridged, 4 ohms: 400 watts x 2 chan.
*RMS Power Rating:
--4 ohms: 75 watts x 4 chan. + 350 watts x 1 chan.
--2 ohms: 100 watts x 4 chan. + 600 watts x 1 chan.
--Bridged, 4 ohms: 200 watts x 2 chan.
*Total power output: 2000 watts Max
*CEA-2006 Compliant Amplifier
*Pulse Width Modulated MOSFET power supply
*Wired remote bass boost level control included
*LED power (green) and protect (red) indicators
*Soft start turn-on
*Speaker-level (high-level) inputs
*5, 4 or 3 channel operation
*Dedicated, large-block subwoofer terminal output
*Nickle-plated RCA, Speaker and Power/Ground Terminals
*Selectable input modes:
--Front two channels (RCA Only) can provide signal to remaining channels
--Four channel High-Level connection can provide signal to Subwoofer channel
*3-way protection circuitry (thermal, overload, and speaker short protection)
*Heavy duty aluminum alloy heat-sink for extreme heat dissipation
*Input sensitivity:
--Low level: 200mV - 6.5V
--High level: 800mV - 16V
*A/B Channel Frequency Response: 10 - 50,000 Hz (+0dB, -3dB)
*Sub-Channel Frequency Response: 10 - 500 Hz (+0dB, -3dB)
*Total Harmonic Distortion (THD): 0.05%
*Signal to Noise Ration: 94 dB
*Selectable crossover filter (Ch 1 - 4): LPF / OFF / HPF
*Variable crossover filter (Ch 1 - 4): 40 - 500 Hz, 12 dB/octave
*Variable low-pass filter (Sub): 40 - 500 Hz, 24 or 12 dB/octave
*Variable Bass Boost (Via Remote): 0 to +18 dB bass boost at 50 Hz
*Fuse Rating: 30A x 3
*8 - 16 Gauge speaker terminal outputs
*4 gauge power and ground wiring is recommended for installation. *Contact us for information regarding a discount on select amplifier kits *from our website when purchased together with this amplifier. Click Here *for our contact information.
*Dimensions: 7-7/8"W x 12"L x 2-3/8"H - Авто/Мото
Amplifier linked in the description of the video!
Great info. I had a question. I was running a JL w3 12" sub and 4 6.5" kicker DS series speakers. However I blow two somehow and got them replaced with 4 6.5 infinity kappa 63xf , however only the sub and back two are working and not the front ones. I only have rca cables on the sub and channel b and no rca cables on channel a. Could that be the reason ? Because at first all 4 speakers worked great prior to these kappa. I'm sorry I know I'm a noob. Thanks
Will I need a 6 split rca cable if I'm running a sub and 4 speakers
Hey I noticed you do alot of inspection using the 5channel kenwood amp . In your opinion what is a better amp . The 5ch pioneer or the 5ch kenwood ? Or do you have any other suggestions. Thanks
Pre installation before installing into car and blew up 2 of them using same brand in dash single din
Just bought this for my 2018 ACCORD!! QUESTION. with it having high level inputs for factory radio, does that mean a line output convertor isn't needed like an lc2i? My stock system doesn't have an amp?
I bought this amp without a bass knob and I'm running 4 door speaker and 1 subwoofer. The sub barely makes any bass at all in comparison to the front door 6x9 speakers. Would a bass knob fix this low to no sub bass issue?
There could be a number of issues besides a bass knob - your ohm load for the sub, gain, output from the radio, etc. Sure you could pick up a bass knob, but I'd check everything else first.
Seems like the knob has to be at least plugged in for this amp to sound good. Why???
Can this amplifier runs. 4 8" midrange and 4 tweeter.
Sure, it is two ohm stable at each of the 4 channels, so just make sure your impedance is correct.
Can we put 2 sub Plonneer 2000 watts with this amp
You can add any sub to this amplifier as long as it is wired correctly.
Is this good for 4x150 rms speaker and 1 600 rms sub??
It's perfect and even for 2 more tweeters. The sound quality is awesome
Can you run 2 subs with 4 speakers? Also how come there are 2 rca inputs for the sub?
Yes, you would just wire them in parallel (since there is only one set of subwoofer outputs). Just be consciences of your ohm load as this amp on the sub channel is only stable down to two ohms minimum. You will need either two DVC 2 ohm subwoofers (wired on series / parallel) or two SVC 4 ohm subs.
Most aftermarket amplifiers will have two channels of input for the mono subwoofer input as the amp will sum both the left and right channel within the amplifier, in case you have bass with certain audio / songs on one side vs the other.
The subs I’m interested in are Pioneer TS-A3000LS4 they are 4 ohm so will it work ?
@@chickenfoundation9323 Yep, those will work great. They are SVC 4 ohm, so wiring together, the amp will see 2 ohms. Perfect match
Does this amp require an alternator upgrade ?
with a big 3 upgrade, and healthy battery, no, you should be fine. RMS is about 1000 watts.
I watched your lighting speaker upgrade, and already installed front and rear one same as your video, can i put this in light f150 lightning, can you show a video how to install this one in f150 lightning please? Thanks
What subs would u recommend for this amp?
Something that does 600w @ 2 ohms. Something like this is a solid build with a great price: amzn.to/3hSA20h
@@ProvoBeastAudio how would it do with a 900w 2 ohm sub
@@tristannolan85 It will underpower the sub, but will be fine as long as you set your gains correctly
How would this handle two SVCs 4 ohms speakers, RMS 250 watts? Specifically talking about the JBLs Club WS1200.
Per channel rms ?
Literally listed all in the description of the video.