That was a very clear, understandable, and concise guide my friend. Thank you for that. It's awesome to stockpile all the classics and put them in HDDs so they never fade away.
If you're having trouble getting the UI to recognize your inputs, try setting it to Device to XInput/0/Gamepad then clicking OK until all the dialogs are closed, then start again. That let me configure the sticks.
You should've swapped "B" and "X" so they match the actual layout of the GameCube controller. It sure is less confusing calling B just B but on the GameCube the B button is on the right side, not on the left one.
That's good for the GameCube but I need to configure my Xbox controller to work for the WII its very frustrating no one has any good Tutorials on RUclips for it could someone please help find one
I was having the same problem. I was trying to runthe wii version of twilight princess - no luck. HOWEVER, using this same mapping route, the gamecube version of the game seems to accomodate an xbox controller with no problem :)
that's cool because my dad is making a new PC for me and I want to download a GameCube emulator and I was curious if you can use other controllers with the dolphin emulator since I don't own a GameCube controller so thank you this helps me a lot.
I need to ask for a favour. Nintendont does not have option of inverting C-Stick axis at all, which is a huge inconvinience. Rotating camera in the game becomes a pain in games, which doesn't allow to switch camera inversion on and off.
My suggestion: spend that $20-$30 and get a Wii controller set because it’s plug and play with no tingling and 70% of wii games required motion. Also get a $20 Mayflash sensor bar and you’ll have a complete Wii system set up on your pc.
Pretty helpful, thanks a lot! SUGGESTION for OP: You might want to put a 'water mark' that says which version of Daulphin this video refers to. For the common mortal this might seems like they are not watching the 'right' instructional video just by the layout of Daulphin's latest version. Cheer and thanks :)
what software should i download to config da settings of my xbox controller?i mean i want to change the buttons settings but soft ware should i download ...thnx
That's right but no enough.If you want to calibrate xbox (for me te bes controller) or any controller to wii games you have to go to wi remote1 / chose xinput joystick to map oystick keys (A,B,1,2 -+), but analogue joystick plays if you go to extend menu and map there the stick and then you calibrate.Finally you have to go to motion simulation (cause you canot run games without moving the cursor) and in the second that says point you calibrate the 2nd analoggue stick (you can move it as mouse or to aim in games).It takes me one day to find it and it finally worked...:)) if you want to shoot with scandal just change a or b key that usually shoots with triger key..
I'm trying to play Sonic Adventure DX, but when I play it on Dolphin the controls are less blended and tend to be stiffer than when I play Sonic Adventure on NullDC (Dreamcast emulator). How come?
I have a question, I am using the newest dolphin emulator and trying to play Twin Snakes but a problem is that whenever I move the analog stick NorthEast, the character moves very slowly, but in any other direction the character runs and I am trying to find a fix to this as its very problematic whenever I have ot fight an enemy in the North East direction.
Tried this with a very new Xbox controller, It would sense the inputs but only when you configured that specific input, essentially they wouldn't "keep". Luckily I found a cheap knockoff xbox controller laying around, But you can always but a gamecube controller with a USB input, if you still have the ISO's for the games that is...
So I’m having trouble connecting my steel series nimbus, I know it’s MFI but it’s recognised by the emulator in the drop down bar but doesn’t recognised any buttons pressed? Also does this work with any cheap usb controllers?
I cant get my dolphin emulator to detect my 360 controller can someone plz help? ive tried everything and ive downloaded the 5 version and latest dolphin program. thx
How to configure the emulator to simultaneously see the gamepad and the minipac arcade panel ? config panel and gamepad but if i want to play on the panel before I have to switch profile is possible to automatically upload the profile mayby any script help, but how to do ?
That was a very clear, understandable, and concise guide my friend.
Thank you for that. It's awesome to stockpile all the classics and put them in HDDs so they never fade away.
listening to this with headphones still feels like your watching it without headphones
This was like the best, easiest to understand, most comprehensive guide I have ever used on RUclips, thanks so much
Glad it helped!
After struggling with a few videos, and restarting a few times, these instructions were the most helpful. Thank you.
awesome
Much thanks for this but I feel like an idiot for not figuring it out lol
OH. it was that easy 😭 i didnt even have to watch this with sound to understand thank you dude
Hello man, your video is 4 years ago but thank you soooooo much man. Really simple but really really good video. Thanks a lot !
Controller stick modifier and C stick modifer you press the stick down. =)
What is the purpose of the modifier?
Please explain if you are able?
This is the best tutorial I have seen on youtube. You are a true saint my friend.
If you're having trouble getting the UI to recognize your inputs, try setting it to Device to XInput/0/Gamepad then clicking OK until all the dialogs are closed, then start again. That let me configure the sticks.
3:23
debelobman
develobed
development mode .......
Lol
Simple and to the point. Good tutorial!
thx bro, finished zelda wind waker and zelda twilight princess :) dope games gonna play metroid prime now
No BS or unnecessary stuff, this was just what I was looking for, thx!
thanks its hard to find videos that do what the title says helped alot
Thank you so much!! You are a great RUclipsr that is a great help!
Thx man that was very helpful, I'm glad theres at least someone who does a good tutorial!
You should've swapped "B" and "X" so they match the actual layout of the GameCube controller. It sure is less confusing calling B just B but on the GameCube the B button is on the right side, not on the left one.
That's good for the GameCube but I need to configure my Xbox controller to work for the WII its very frustrating no one has any good Tutorials on RUclips for it could someone please help find one
Walaikum salaam ❤❤❤ glad I found an Arab RUclipsr ❤️❤️
Not all heroes wear capes, thank you kind sir for this informative video!
Glad you enjoyed it!
Omg TY this helped so much! ALSO you just happened to show off the controls on the game I wanted to know this for xD how ironic
Buen video 🌟 thank you very much, saludos desde México
I had no idea you could do this I was ready to put up with using a keyboard (way worse even when you map it yourself)
Thanks!!
I'm trying to play super mario sunshine as well :D Thanks for the video man. It was very helpful.
my Xbox 360 usb controller doesnt register in the dolphin it works for every other emu i play on my channel :i dont understand:
hi can u pls help me
i can config everything on the controller settings and it works perfectly
but when i play ingame none of the controls are working
same did anyone fix this?
same for me can anyone help please?
need fix ;-;
@84metal_piranha Hahha lol me too.
I was having the same problem. I was trying to runthe wii version of twilight princess - no luck. HOWEVER, using this same mapping route, the gamecube version of the game seems to accomodate an xbox controller with no problem :)
Beautiful, thank you so much habibi
october 2024 still works!!! Thank you!
woow, awesome
Nice man! Keep up the good work!!
you are the king !!!!!! so helpful bro i can play prine of percia and zelda and so much more now
with a controller yessssss!!!!!!!
that's cool because my dad is making a new PC for me and I want to download a GameCube emulator and I was curious if you can use other controllers with the dolphin emulator since I don't own a GameCube controller so thank you this helps me a lot.
Thanks for the video!
I'm not used to the xbox like controllers.
I need to ask for a favour. Nintendont does not have option of inverting C-Stick axis at all, which is a huge inconvinience. Rotating camera in the game becomes a pain in games, which doesn't allow to switch camera inversion on and off.
thank you sir you're very helpful
THANKS PROOOOO!!!!!!! Lets Start with TWILLIGHT PRINCESS FINALLY
Helpful brother. Good man 👍
when i do the drop down for the Device in the configure menu, x gamepad is not there even though I have my xbox 360 controller plugged in and working
Did you find a solution? lol
Same problem anyone ever find a solution
It was very helpful, thanks!
Thanks man , i am a brazilian boy ,i like this video !
Simple and to the point, Thank You Sir
Works perfectly for a ps4 ds4 controller to as long as you have to xbox 360 driver, and a ds4 driver running in the background.
My suggestion: spend that $20-$30 and get a Wii controller set because it’s plug and play with no tingling and 70% of wii games required motion. Also get a $20 Mayflash sensor bar and you’ll have a complete Wii system set up on your pc.
Dolphin's UI is v confusing to me (idk why) but this video is very clear and easy to understand and helpful
Pretty helpful, thanks a lot!
SUGGESTION for OP: You might want to put a 'water mark' that says which version of Daulphin this video refers to.
For the common mortal this might seems like they are not watching the 'right' instructional video just by the layout of Daulphin's latest version. Cheer and thanks :)
Where is the select button placed?
they got default bindings for keyboard so the fact that they don't for controller is extremely baffling to me
but and for wimmote??
You deserve a like my friend.
Maaan! You are the best!
SALAM MY FRIEND OR BROTHER THANK YOU TECHUTOPIA FOR THE TUTORIAL FROM RASHEED NATHA GAMING CHANNEL RASHEED NATHA 1👍
hi tech utopia iam a big fan of u....can u plz make a video on nunchuk configure with gamepad
Now this is how you do a tutorial, much obliged
what software should i download to config da settings of my xbox controller?i mean i want to change the buttons settings but soft ware should i download ...thnx
So how do you correct the input for "down" being stuck, when mapping your own controller for GameCube?
Which version of dolphin are you using in the video?
That's right but no enough.If you want to calibrate xbox (for me te bes controller) or any controller to wii games you have to go to wi remote1 / chose xinput joystick to map oystick keys (A,B,1,2 -+), but analogue joystick plays if you go to extend menu and map there the stick and then you calibrate.Finally you have to go to motion simulation (cause you canot run games without moving the cursor) and in the second that says point you calibrate the 2nd analoggue stick (you can move it as mouse or to aim in games).It takes me one day to find it and it finally worked...:)) if you want to shoot with scandal just change a or b key that usually shoots with triger key..
greetings from Brazil, it work's
You are the heroe our world deserves
hey thanks. I used my dual shock 4 I had to download ds4 app it's on RUclips n it works like a champ thanks.
Salam
It only shows keyboard and all devices and not my gamecube gamepad in the drop down menu like at 0:55 so i can't map the keys. Pls halp
Thanks a lot, I assumed I fucked up somewhere.I simply just had to use that drop-down bar, hahaha.
I want to play melee but it says "press start", i cant find anyway to do that
Map a button on you controller to stary? Sorry for late reply
fuck yeah! it worked for 360!
Thank you so much bro! I love you!! I clicked like too! :D
Any settings for input sensitivity?
Cool video, Thanx!
I don't now why in all tutorials the triggers to the analog it is needed in some games .
Take your like good sir, well deserved, helped a lot.
I'm trying to play Sonic Adventure DX, but when I play it on Dolphin the controls are less blended and tend to be stiffer than when I play Sonic Adventure on NullDC (Dreamcast emulator). How come?
I have a question, I am using the newest dolphin emulator and trying to play Twin Snakes but a problem is that whenever I move the analog stick NorthEast, the character moves very slowly, but in any other direction the character runs and I am trying to find a fix to this as its very problematic whenever I have ot fight an enemy in the North East direction.
Nice vid , do you know how to set up the Wii control scheme for the xbox controller ??
Tried this with a very new Xbox controller, It would sense the inputs but only when you configured that specific input, essentially they wouldn't "keep". Luckily I found a cheap knockoff xbox controller laying around, But you can always but a gamecube controller with a USB input, if you still have the ISO's for the games that is...
Can I use 4 of xbox360 controllers to play mario party?
yes
So I’m having trouble connecting my steel series nimbus, I know it’s MFI but it’s recognised by the emulator in the drop down bar but doesn’t recognised any buttons pressed? Also does this work with any cheap usb controllers?
Thanks it worked perfect!
Thanks very much I'm about to try this with the XboxOne controller.
I was hoping to find out how to get the thumb L and R mapped so you can use that feature but no one seems to know.
Should I switch b and x because that resembles a gamecube controller more accurately?
Can I follow this video to setup my controls for Inazuma Eleven game on Dolphin ??
Your voice is amazing!!!!
Thanks a lot man :D works like a charm
What’s the wire that is on the controller?
This worked so well, thankyou!
Can you make a video on controller settings to play this game in android mobile in dolphin emulator
Good video. But sometime, the character moves from it selfes, what can I do?
Excelente!! Gracias!!!
Wont work if u press a button it dont react
when i pair my switch controller and turn on mario kart double dash the menu moves by itself without the analog moving.
for some reason my left analog stick controls the mouse cursor as well as the in game movement. i dont know how to fix this.
WHERE DID YOU GET SUPER MARIO SUNSHINE FROM I CANT FIND IT ANYWHERE
Thank you very much bro. Helped a lot!
tysm ur the only one that helped I apprectiate it
Thanks man, it was really helpful!
Which version you are using
I cant get my dolphin emulator to detect my 360 controller can someone plz help? ive tried everything and ive downloaded the 5 version and latest dolphin program. thx
Ever find a solution?
How to configure the emulator to simultaneously see the gamepad and the minipac arcade panel ?
config panel and gamepad but if i want to play on the panel before I have to switch profile is possible to automatically upload the profile mayby any script help, but how to do ?
The input for Gamepad isn't there, just my keyboard and steering wheel. Any help??
Thank you so much. Im thankful for this video right now.
Thanks man, great video :D
Thank you for the help and I hope you enjoy your day.