What games do you play on Dolphin Emulator? A lot of people ask me the same questions a lot so here's the answers Where do you get the games? I can't publish that on RUclips because RUclips removes any links to those websites and I only use games I have obtained through dumping my own disks. Try Reddit How do you play Skyward Sword with an Xbox Controller? Skyward Sword is motion plus which I don't recommend or cannot get working properly with Dolphin just yet.
So I set my controller up 100%. There's only one problem whenever I play Super Mario Galaxy my cursor can't reach corners it kind of just stays 2 in away from all edges and I've played with it a lot still nothing for some games it doesn't even let me get through the menu because I have to select something in the corner
we've been looking for instructiosn for ovr an hour, then finally found you, 5 minutes in, you're a legend, let's hope we feel the same way in 10 minutes. thank you bro
Thank you so much. I was struggling with Animal Crossing: City Folk on my android device because the buttons were all over the place and I had no idea how to set up the emulated WiiMote pointing. I followed your instructions and then made some slight modifications and now it works so well. Your instructions helped me figure out how to adjust the R stick sensitivity for the pointer, and also to find the "hide" option so that the pointer isn't always visible (which affects the gameplay in Animal Crossing). Great video!
while in the wii remote configure under motion simulation: -turn relative input on -turn auto hide on -set the yaw and pitch at about 18-20 degrees voila. the real way to play smg on dolphin :)
Thank you for your video. It inspired me to look further :) In fact it's possible to have only one preset for Mario / Ray / Ball : - My 'Left Joystick' makes mario move. - If i maintain 'Shoulder L', it make the wiimote to stand vertical and the same 'Left Joystick' is used to move the ball (1) - Else if i maintain 'Shoulder R', the 'Left Joystick' control the manta ray (2) (1) I needed to put a condition in two checkbox if 'Shoulder L' to actually switch wiimote to vertical. (2) I needed to change the movement sensibility if 'Shoulder R' to avoid shaking when changing direction. I also put shake on 'B button', near the Jump 'A button'. And put 'A' again, on 'Thumb R' to easy select on screen for all the interface stuff
yo did you finish the game? today I got to loopdeeloop galaxy and I am stuck it tells me to move left and I move left but nothing happens and it keeps telling me can you help?
@@leonfruciano3119 excuse me but you need to specify, how can you play super mario galaxy in xbox series s? mario is a nintendo mascot and he is exclusive to their consoles, or did you mean that you are playing mario galaxy with an xbox series controller?
@@Summorial2 It's actually possibile now, i'm using retroarch on the Xbox. At First i tried using Dolphin standalone app but It was unplayable because i couldn't change the controls, so i used Dolphin core inside retroarch and It worked, but once i got to loopdeeloop galaxy It was impossible to go on
Had I seen this first, I wouldn´t have bought a bar!!!! Thanks a lot man!!!! I didn't even use an Xbox controller. I used a wireless MSi controller and worked the same way.
for D-pad controls i recommend this particular setup: up: `Pad N` + `Right Y+` down: `Pad S` + `Right Y-` left: `Pad W` + `Right X-` right: `Pad E` + `Right Y+` for example, if you play MySims or any game that uses the D-Pad for camera movements, it can be nice to use the right stick for this since left stick is already for walking
Thanks for the tut! Standard works fine in Mario Galaxy 1, but while surfing, I just jump up and down in the water, even though I use the surf profile and I've double-checked that every button is set up correctly for my Xbox One controller :( EDIT: ok, just figured it out. Seems like SMG1 is different to SMG2 when it comes to surfing? I just have to press A to move forward instead of "tilting" it with a button.
QUESTION: When I follow the guide to configure the cursor to my right analog stick, it doesn't work in-game, nothing appears. Is there something I can do about this?
Just in case anyone bumps into this and is discouraged by the fact that it doesn't work with Skyward Sword, don't worry! There is actually a way to play SS with a controller, you just need to have the most recent version of Dolphin (the beta ones, NOT the stable 5.0 release). In fact, few weeks ago a completed SS wih a XBox One controller with no issues. The only parts I can remember having a bit of trouble were the ones where Link has to thrust his sword into the ground to enter the SIlent Realm, but there's only like 4 moments like it in the entire game, and just wiggling the analog in all directions sometimes does the trick or something.
I know it exists I just don't like it right now. And with all the games coming out I want to play I don't have the time to test it. I always use Beta Dolphin. I'm glad it worked for you. When I made this video it was much worse than it is now
@@TwinCherryStudio I feel you man, it definetely wasn't a perfect experience haha, but it was enjoyable enough and capable of beating the entire game, better than nothing for broke ppl like me who can't afford a Dolphin Bar and new Wii motes
I'm so confused - I have Dolphin 5.0 but my options screen looks different, and does not have that option to check. It has a dropdown menu where I can choose emulated wii-mote, then a thing called balance board and an option for Real Wiimotes. I can not figure out how to activate the nunchuk. Every game I load says to plug in the nunchuk.
in my opinion you should just have the point set to your mouse and the tilt to your right joystick. This way you dont have to switch between profiles. But for this to work properly you should make sure the A button is set to A *and* the left mouse button. This way the menu is easier to select. And for starbit shooting i would do B *and* right mouse button.
you can use another if you right click on a button, put an or , select a device and button and press Select ex: `evdev/0/Generic X-Box pad:SOUTH`|`evdev/0/DELL 00:00:08:77 Touchpad:LEFT` with this I can left clic with the touchpad and press A on the xbox controller
Some game require me to shake my phone for example to hit the enemy ! I don't want to shake my phone, anyway around this ??.. what is this function called ?...
Obrigado, vc salvou minha vida kkkkk. Procurei em vários lugares e não conseguia achar a configuração para sensor de movimento. Thank you, you saved my life. I looked in several places and couldn't find the motion sensor setting.
ruclips.net/video/sTRaVsDdH6c/видео.htmlsi=i25l8nwKyL4ir3Zg&t=625 I talk about copying controller settings here. You copy the dolphin folder from the PC version into the relevant folders on your Xbox. There should be a dolphin folder on your Xbox. I haven't used it in about a year now. So I'm not sure where the emulator is at on Xbox.
When using a Steam Deck, you essentially have more options provided you have the buttons mapped appropriately. I like the idea of using the right trackpad to move the curser and gyro for tilt controls.
Thank you SO much! I ran into a few issues with Dolphin, and the game pad setup just seemed so strange compared to say, pcsx2 or ppsspp etc. Motion controls, nunchucks, it was all Greek to me. Lol. I totally needed a hand, and this was super easy and straight forward. Thanks a million!!! Btw, I was trying to play Tales of Symphonia Dawn of the New World, but those setting work nicely.
My config for skyward sword which is pretty comfortable so far (I have gotten to Lanayru Mining Facility). A: A B: B X: 1 Y: 2 Dpad: Dpad LB: Z RB: C Start: + Back: - Left stick: nunchuck stick Left stick click: shake nunchuck Right stick: point wii remote Right stick click: shake wii remote RT+right stick: swing wii remote RT+left stick: swing nunchuck LT+right stick: tilt wii remote (this works for flying your loftwing and beetle, as well as inserting the keys into temple boss doors.) The only thing that's a little finicky is trying to lock your sword upright for a skyward strike, but it is possible
@@summerh3694 Go to the configuration for the emulated wii remote and on the very right there’s a drop down menu labeled “extension.” Select nunchuck from there
Not sure if you're able to help since I'm doing this for a different game, but the right analog stick isn't working in-game for me, although It works perfectly fine on the Motion Simulation screen
honestly im just trying to play metroid prime 3 corruption. have the first 2 games on dolphin and it works fine bc GC..but is it possible to play MP3 with an xbox 1 controller?
Everything seemed to work great, but when I have to select "starfish" in the observatory and press A, I can't do that, it doesn't select. What could I do? Infinite thanks.
i have an identical controller but the rumble option doesnt show (no motor L nor R). does it have to do with my controller detected as DINPUT? i can see your is XINPUT. help
Some game require me to shake my phone for example to hit the enemy ! I don't want to shake my phone, anyway around this ??.. what is this function called ?...
Uhmmmm shouldn't there be the tilt function as well considering that BOTH games use The tilt function in the most UTTERLY HORRIBLE WAY IMAGINABLE ((Hint: It's the Starball levels I'm talking about if you don't know))
Greetings, thank you very much for helping me to be able to play Mario Galaxy, the configuration you made in the emulator worked perfectly for me, 100%, you are the best, you earned my like and my subscription to your channel, thank you very much with all my heart
I got Skyward Sword perfect with a wired mini usb Xbox controller, all functions are working perfect even controls and button sequences i didnt know about when i used to played Zelda, on Wii, i didnt know Link could do backflips and flat ground leap in all directions, Im on Retroarch Dolphin core, videos posted up here on youtube soon and reddit retroarch forum. I had to switch A and B around. Wiimote shake is tricky 3 buttons to prompt throwing trajectory cursor R2 and Y, then A, then R analog tap to shake / throw, after dashing LT is roll/ nunchuk shake. R anolog controls pointers Zelda Menus are select and start, best part is F1 menu which i dont have on my keyboard, it opens windows 10 menu, the Big X icon button opens the Controls Menu!!!
Am having trouble with the controller continuously connecting and disconnecting whenever I press a button on the controller, it gives the prompt "Wiimote 1 connected" then "Wiimote 1 disconnected by emulated software" any help would be amazing. edit: fixed the issue, go into your dolphin emulator directory and completely delete the entire folder, and in recycling bin too, reinstall it but run the setup and normal application as administrator.
Maybe the community can provide recommended pre-configured control profile for motion control games in particular. So when you load a Wii game with motion controls you can opt to use a popular profile or edit it for your own preferences.
wont let me press enter in bottem right of screen to start zelda skyward sword pointer doesnt go that far i tried re calibrating it doesn't work i even got the dolphin bar to try to make it work and im having trouble setting that up too someone help plz 🤦♂️🤦♂️🤦♂️🤦♂️
I'm a little late but I think I might have figured out the sensitivity issue. Under (point) in (motion sim), check (relative input) and that might help you. Thank you for helping me play a childhood favorite. 😄
I have loaded the wii contorller profile that comes with dolphine just to have the motion settings because the wii remote and the switch pro controller are identical in motion settings and it worked with me as if i'm playing on the wii. I'm wondering why many people don't know that i feel i'm the only one who figured that out
I am having trouble with my pointer still currently. It works in the settings but doesn't have any affect in the game. I am running dolphin 5.0 please help
The Z button doesn't work when I try to ground pound. I'm playing the first Mario Galaxy game before playing the 2nd one and one of the stars in Honey Hive Galaxy is about ground pounding. What do I do?
for some reason whey I configured my controller, R trigger is twirl jump, but mario is not "dashing" (put on as X or A); I rearranged the controls, and suddenly the only thing I can do is jump. I was hoping xbox360 would be X-dash, A-jump......left trigger for twirl, etc. (new super mario Wii)
Hi! i have a problem with the button ''A'' on my gamecube controller, i dont know why it doesnt detect it when it works perfectly fine in Project64, how do i fix this?
My issue with super Mario galaxy 2 is how do I make the z button function work. I have the Wiimote fictions working but it wants me to press Z to ground pound or whatever but even though I’ve mapped it on the classic controller buttons it does not work. Anyone know how to make this function work?
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
What games do you play on Dolphin Emulator?
A lot of people ask me the same questions a lot so here's the answers
Where do you get the games? I can't publish that on RUclips because RUclips removes any links to those websites and I only use games I have obtained through dumping my own disks. Try Reddit
How do you play Skyward Sword with an Xbox Controller? Skyward Sword is motion plus which I don't recommend or cannot get working properly with Dolphin just yet.
So I set my controller up 100%. There's only one problem whenever I play Super Mario Galaxy my cursor can't reach corners it kind of just stays 2 in away from all edges and I've played with it a lot still nothing for some games it doesn't even let me get through the menu because I have to select something in the corner
i beated skyward sword with an xbox controller just saying its very possible, hard at the begining and youll get used to the controls
@@VeloStatue66 what are your configs for it because i have everything download i just need a config
Does the same setup work for no more heroes?
@@DionMabhoti He beat it on the Switch using an XB controller.
Honestly, the coding that went into the mapping is the most impressive bit of emulation I've seen.
we've been looking for instructiosn for ovr an hour, then finally found you, 5 minutes in, you're a legend, let's hope we feel the same way in 10 minutes. thank you bro
Thank you so much. I was struggling with Animal Crossing: City Folk on my android device because the buttons were all over the place and I had no idea how to set up the emulated WiiMote pointing. I followed your instructions and then made some slight modifications and now it works so well. Your instructions helped me figure out how to adjust the R stick sensitivity for the pointer, and also to find the "hide" option so that the pointer isn't always visible (which affects the gameplay in Animal Crossing).
Great video!
while in the wii remote configure under motion simulation:
-turn relative input on
-turn auto hide on
-set the yaw and pitch at about 18-20 degrees
voila. the real way to play smg on dolphin :)
Thanks, that helped a lot.
Where is autohide
@@GeneralAlias in the wii remote configuration under motion simulation it’s on the bottom of the point section
@@zerofoxgiven7491 I'm on the stable 5.0 version, is there an option for it on the 5.0 version?
You're the best. Could not find this simple suggestion anywhere else
Im so glad there is a mobile version of Dolphin. Having games like Call of Duty WAW is such a pleasure to work using my controller.
i've been looking for video like this for long time , thank you so much
Thank you for your video. It inspired me to look further :)
In fact it's possible to have only one preset for Mario / Ray / Ball :
- My 'Left Joystick' makes mario move.
- If i maintain 'Shoulder L', it make the wiimote to stand vertical and the same 'Left Joystick' is used to move the ball (1)
- Else if i maintain 'Shoulder R', the 'Left Joystick' control the manta ray (2)
(1) I needed to put a condition in two checkbox if 'Shoulder L' to actually switch wiimote to vertical.
(2) I needed to change the movement sensibility if 'Shoulder R' to avoid shaking when changing direction.
I also put shake on 'B button', near the Jump 'A button'.
And put 'A' again, on 'Thumb R' to easy select on screen for all the interface stuff
yo did you finish the game? today I got to loopdeeloop galaxy and I am stuck it tells me to move left and I move left but nothing happens and it keeps telling me can you help?
I'm looking into that actually for an updated video. Thanks for your suggestions
@@Summorial2 Same here, i play on xbox series s, did you find a solution?
@@leonfruciano3119 excuse me but you need to specify, how can you play super mario galaxy in xbox series s? mario is a nintendo mascot and he is exclusive to their consoles, or did you mean that you are playing mario galaxy with an xbox series controller?
@@Summorial2 It's actually possibile now, i'm using retroarch on the Xbox. At First i tried using Dolphin standalone app but It was unplayable because i couldn't change the controls, so i used Dolphin core inside retroarch and It worked, but once i got to loopdeeloop galaxy It was impossible to go on
Instructions unclear broke my arm
Seriously though this helped a lot dude thank you
Had I seen this first, I wouldn´t have bought a bar!!!! Thanks a lot man!!!! I didn't even use an Xbox controller. I used a wireless MSi controller and worked the same way.
Glad I could help!
Probably the best configuration for the Wii remote for dolphin I’ve seen
for D-pad controls i recommend this particular setup:
up: `Pad N` + `Right Y+`
down: `Pad S` + `Right Y-`
left: `Pad W` + `Right X-`
right: `Pad E` + `Right Y+`
for example, if you play MySims or any game that uses the D-Pad for camera movements, it can be nice to use the right stick for this since left stick is already for walking
Awesome I'll try this out!
@@kirk422 make sure to include the commas and the spacing.. so like _`Pad N` + `Right Y+`_ and not _Pad N+Right Y+_ :)
You are an absolute star. This was the only tutorial I've found on the subject that covers everything clearly. Fixed the issue now.
hes not a star hes bald hahahaha only thing that shines is his gus forehead
Thanks for the tut! Standard works fine in Mario Galaxy 1, but while surfing, I just jump up and down in the water, even though I use the surf profile and I've double-checked that every button is set up correctly for my Xbox One controller :( EDIT: ok, just figured it out. Seems like SMG1 is different to SMG2 when it comes to surfing? I just have to press A to move forward instead of "tilting" it with a button.
Absolutely spot on tutorial! I'm an idiot and this worked like a charm! lol
Gracias!! Nadie explicaba tan bien como tú
QUESTION: When I follow the guide to configure the cursor to my right analog stick, it doesn't work in-game, nothing appears. Is there something I can do about this?
Just in case anyone bumps into this and is discouraged by the fact that it doesn't work with Skyward Sword, don't worry! There is actually a way to play SS with a controller, you just need to have the most recent version of Dolphin (the beta ones, NOT the stable 5.0 release). In fact, few weeks ago a completed SS wih a XBox One controller with no issues. The only parts I can remember having a bit of trouble were the ones where Link has to thrust his sword into the ground to enter the SIlent Realm, but there's only like 4 moments like it in the entire game, and just wiggling the analog in all directions sometimes does the trick or something.
I know it exists I just don't like it right now. And with all the games coming out I want to play I don't have the time to test it. I always use Beta Dolphin. I'm glad it worked for you. When I made this video it was much worse than it is now
@@TwinCherryStudio I feel you man, it definetely wasn't a perfect experience haha, but it was enjoyable enough and capable of beating the entire game, better than nothing for broke ppl like me who can't afford a Dolphin Bar and new Wii motes
i used this and honestly its perfect for the game. thanks a lot
I'm so confused - I have Dolphin 5.0 but my options screen looks different, and does not have that option to check. It has a dropdown menu where I can choose emulated wii-mote, then a thing called balance board and an option for Real Wiimotes. I can not figure out how to activate the nunchuk. Every game I load says to plug in the nunchuk.
What settings do I have to use for the bird levels?
in my opinion you should just have the point set to your mouse and the tilt to your right joystick. This way you dont have to switch between profiles. But for this to work properly you should make sure the A button is set to A *and* the left mouse button. This way the menu is easier to select. And for starbit shooting i would do B *and* right mouse button.
how do i do that plz
but wait in every profile you can only use just one device
you can use another if you right click on a button, put an or , select a device and button and press Select
ex: `evdev/0/Generic X-Box pad:SOUTH`|`evdev/0/DELL 00:00:08:77 Touchpad:LEFT` with this I can left clic with the touchpad and press A on the xbox controller
Some game require me to shake my phone for example to hit the enemy ! I don't want to shake my phone, anyway around this ??.. what is this function called ?...
@@habersimemuero9127 no you can use every device connected (maybe new update) in the input selection
Thank you! You have no idea how much your video helped.
You've made my experience with another game easy dude thank you. I can play Endless Ocean now
thanks dude now i finally can play super mario galaxy :)
probably the most impressive emulator. with the wii menu, changing discs, the input mapping. Its a fucking beast.
Just found this video, what is the best controller map for punch out Wii?
thanks a million dude I'm playing Deadly creatures and so far your setup is working like Brandy & cola
thank you so much now i can bring back my childhood
Obrigado, vc salvou minha vida kkkkk.
Procurei em vários lugares e não conseguia achar a configuração para sensor de movimento.
Thank you, you saved my life.
I looked in several places and couldn't find the motion sensor setting.
como controla a estrelinha?
How can i transfer this configuration on xbox series s retroarch?I cant find any video about it!
ruclips.net/video/sTRaVsDdH6c/видео.htmlsi=i25l8nwKyL4ir3Zg&t=625
I talk about copying controller settings here. You copy the dolphin folder from the PC version into the relevant folders on your Xbox. There should be a dolphin folder on your Xbox. I haven't used it in about a year now. So I'm not sure where the emulator is at on Xbox.
This video is gold. Thank you so much for your time and help!
When using a Steam Deck, you essentially have more options provided you have the buttons mapped appropriately. I like the idea of using the right trackpad to move the curser and gyro for tilt controls.
thank you, am about to start playing SMG2 and didnt want to figure this out myself
my mom did not let me go trick or treating this year becuase she says i might cathch the coronavirus and kill all of my friends
Thank you so much. You are a lifesaver. Out of all the vids I watched, yours is the only one that made sense.
Thank you SO much! I ran into a few issues with Dolphin, and the game pad setup just seemed so strange compared to say, pcsx2 or ppsspp etc. Motion controls, nunchucks, it was all Greek to me. Lol. I totally needed a hand, and this was super easy and straight forward. Thanks a million!!!
Btw, I was trying to play Tales of Symphonia Dawn of the New World, but those setting work nicely.
So I can “finally” play all Wii games that force motion controls with a normal controller?! That is amazing!
I know it's an old video but it definitely helped me out. Thank you :)
Glad it helped!
Thank you sooooo much for teaching me configurate the nunchuk immmm sooooo happyyy +1 subscriber
I nearly bought a wii nunchuck & wii zapper for Sin & Punishment: Star Successor but this works great. Thanks.
Thanks for this... playing both of the mario galaxy games in my pc is awesome...as I'd never played them before.
Super helpful and clear. Thanks man
My config for skyward sword which is pretty comfortable so far (I have gotten to Lanayru Mining Facility).
A: A
B: B
X: 1
Y: 2
Dpad: Dpad
LB: Z
RB: C
Start: +
Back: -
Left stick: nunchuck stick
Left stick click: shake nunchuck
Right stick: point wii remote
Right stick click: shake wii remote
RT+right stick: swing wii remote
RT+left stick: swing nunchuck
LT+right stick: tilt wii remote (this works for flying your loftwing and beetle, as well as inserting the keys into temple boss doors.)
The only thing that's a little finicky is trying to lock your sword upright for a skyward strike, but it is possible
thank you so much for this, I'm trying it now but I can't get past the first screen telling me to connect the nunchuck
@@summerh3694 Go to the configuration for the emulated wii remote and on the very right there’s a drop down menu labeled “extension.” Select nunchuck from there
Thanks! I was having trouble getting the right stick to work properly and this fixed the problem.
thx mate the motion i could not figure out how to do the motion controls and you explain it very clearly
Great, thx, exactly what i was looking for :)
thanks man , i really was needing this
Not sure if you're able to help since I'm doing this for a different game, but the right analog stick isn't working in-game for me, although It works perfectly fine on the Motion Simulation screen
You sir are incredible. Thank you so much for this info!
honestly im just trying to play metroid prime 3 corruption. have the first 2 games on dolphin and it works fine bc GC..but is it possible to play MP3 with an xbox 1 controller?
If mouse and keyboard is an option Google "Primehack releases", it's a special dolphin file with controls built in for a Metroid Prime Trilogy ISO
How would you setup the controllers for Mario Party?
The only video that helped me, thanks.
Fantastic News.
helped thanks so much and allowed me to beat New Super mario Bros Wii thz so much subbed for more! Very clean video easy to follow no bs good content
I love your tutorial
Thank you
I was struggling with this Thanks So Much
Hey so when I click extension, nothing pops up
Thank you so much for this video ! This helped me so much for my stream on this incredible game 😄
Everything seemed to work great, but when I have to select "starfish" in the observatory and press A, I can't do that, it doesn't select. What could I do? Infinite thanks.
my mom did not let me go trick or treating this year becuase she says i might cathch the coronavirus and kill all of my friends
Thank you for this awesome tutorial, I was lost with all those options :)
appreciate it needed this lol :D
Thanks man best tutorial for controller setup i've found
Thank you so much!!
Glad it helped!
so what about the android version of dolphin emulator because this is confusing
When I press the shake button it just shakes the pointer and not Mario and I don’t know why
Thanks soo much! Now I can play my wii games on my emulator. Thanks so much for the help.
Heya! Is there any possibility I could have your settings by any chance? :)
This video was extremely helpful. Thank you!
Thanks so much, all the best!
Does it work for twilight princess
Yes but I prefer the GameCube edition as the GameCube controller is easier to control for that game
i have an identical controller but the rumble option doesnt show (no motor L nor R). does it have to do with my controller detected as DINPUT? i can see your is XINPUT. help
I've found these controls to be somewhat good with Phineas and Ferb: Across the 2nd Dimension (aside from Perry Ball).
my mom did not let me go trick or treating this year becuase she says i might cathch the coronavirus and kill all of my friends
@@RickSatan ok
Very very helpful thanks. Going to have to struggle to fine tune some things for Metroid Prime 3 though.
What version of dolphin are you using?
Nevermind
Some game require me to shake my phone for example to hit the enemy ! I don't want to shake my phone, anyway around this ??.. what is this function called ?...
Uhmmmm shouldn't there be the tilt function as well considering that BOTH games use The tilt function in the most UTTERLY HORRIBLE WAY IMAGINABLE ((Hint: It's the Starball levels I'm talking about if you don't know))
Greetings, thank you very much for helping me to be able to play Mario Galaxy, the configuration you made in the emulator worked perfectly for me, 100%, you are the best, you earned my like and my subscription to your channel, thank you very much with all my heart
I got Skyward Sword perfect with a wired mini usb Xbox controller, all functions are working perfect even controls and button sequences i didnt know about when i used to played Zelda, on Wii, i didnt know Link could do backflips and flat ground leap in all directions, Im on Retroarch Dolphin core, videos posted up here on youtube soon and reddit retroarch forum. I had to switch A and B around. Wiimote shake is tricky 3 buttons to prompt throwing trajectory cursor R2 and Y, then A, then R analog tap to shake / throw, after dashing LT is roll/ nunchuk shake. R anolog controls pointers Zelda Menus are select and start, best part is F1 menu which i dont have on my keyboard, it opens windows 10 menu, the Big X icon button opens the Controls Menu!!!
Am having trouble with the controller continuously connecting and disconnecting whenever I press a button on the controller, it gives the prompt "Wiimote 1 connected" then "Wiimote 1 disconnected by emulated software" any help would be amazing.
edit: fixed the issue, go into your dolphin emulator directory and completely delete the entire folder, and in recycling bin too, reinstall it but run the setup and normal application as administrator.
I have the same problem HELP!!!!!
me three!
redownload dolphin
Short clear and informative. 👍
Just a side note here. It also works with the Switch Pro Controllers for those like me who doesnt own an XBox.
THANSK
Appreciate it bro
Maybe the community can provide recommended pre-configured control profile for motion control games in particular.
So when you load a Wii game with motion controls you can opt to use a popular profile or edit it for your own preferences.
I did this with my joycons and it worked thanks
wont let me press enter in bottem right of screen to start zelda skyward sword pointer doesnt go that far i tried re calibrating it doesn't work i even got the dolphin bar to try to make it work and im having trouble setting that up too someone help plz 🤦♂️🤦♂️🤦♂️🤦♂️
I'm a little late but I think I might have figured out the sensitivity issue. Under (point) in (motion sim), check (relative input) and that might help you. Thank you for helping me play a childhood favorite. 😄
How do you find motion simulation on the 5.0 version of it
I have loaded the wii contorller profile that comes with dolphine just to have the motion settings because the wii remote and the switch pro controller are identical in motion settings and it worked with me as if i'm playing on the wii. I'm wondering why many people don't know that i feel i'm the only one who figured that out
This worked
Thank you man
ball doesnt work for me the ball always rolls forward, the backwards move stops me and left and right moves moves me backwards.
I am having trouble with my pointer still currently. It works in the settings but doesn't have any affect in the game. I am running dolphin 5.0 please help
Is it better to use a controller for certain games? I have been using a wired keyboard and mouse for it for a couple games including Disney Mickey.
Awesome can't wait to try it
Thank you! Want to give Galaxy 2 a go since Nintendo refused to patch All-Stars 3D for some reason...
thak you so much this is working well on Sonic Unleashed, ill update this for when i test out colours, if people are intersed.
The Z button doesn't work when I try to ground pound. I'm playing the first Mario Galaxy game before playing the 2nd one and one of the stars in Honey Hive Galaxy is about ground pounding. What do I do?
did you bind it in the "extension" tab
El mejor video sin duda bien explicado y facil muchas gracias hermano
for some reason whey I configured my controller, R trigger is twirl jump, but mario is not "dashing" (put on as X or A); I rearranged the controls, and suddenly the only thing I can do is jump. I was hoping xbox360 would be X-dash, A-jump......left trigger for twirl, etc. (new super mario Wii)
Great video, thanks for the help, keep it up!
Hi! i have a problem with the button ''A'' on my gamecube controller, i dont know why it doesnt detect it when it works perfectly fine in Project64, how do i fix this?
super helpful dawg
Using this for Animal Crossing City Folk. Thank you :)
This is a super helpful video ! Now me and my fiancee can play mario kart ! Happy Gaming!
My issue with super Mario galaxy 2 is how do I make the z button function work. I have the Wiimote fictions working but it wants me to press Z to ground pound or whatever but even though I’ve mapped it on the classic controller buttons it does not work. Anyone know how to make this function work?