I had two significant problems with the quality of the materials in this kit: 1. One of the jacknuts twisted radially instead of axially shrinking, which renders it useless for mounting the spoiler to the body of the CRV. It appears that the jacknut threads were galled or irregular. 2. The threadlocker material in the flange nuts to mount the high mount tail light cause the bolts to strip out the plastic in the high mount tail light. This prevents mounting the high mount tail light.
Thanks for posting this video. It was really helpful. I do have have a few questions though. I noticed that when I mounted the high-mount brake light on the spoiler it doesn't seem to fit flush with the spoiler. There tends to be a gap on the top left and right sides of the high-mount brake light. Basically, the area on either side of the rubber gasket. Is that normal? I was thinking of sealing that area with clear caulk, but I wanted to check to make sure I didn't do something wrong before doing so. Also, my kit didn't come with a rubber plug for the high-mount brake light. Is that really needed? If so, where can I get one? Thanks!
@@CollegeHillsHondaAccessories No, it's a genuine Honda spoiler. Are you sure Honda didn't modify the high-mount brake light design? The back of mine versus some of the others I've seen is different?
@@idealynx The part didn't go through any updates to our knowledge. We actually had a customer car in the shop this morning that I looked at. I did not notice what you are describing.
Can I please ask how to remove the interior panel of the tailgate itself? I accidentally dropped the connector to the license plate light in the hole from the outside and need to retrieve it... thanks!!!
I would never ever allow anyone to drill such holes in the body. It rips the heart off the chest when I see that drilling process. Rust will come out in 2-3 years
I would like to install on of these spoiler on my CRV but it dose not looks OEM and dose not seems to goes well with the hatch. Why can they make a better fit or conform to the tailgate as with other SUV, like the HR-V etc...
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video](http://i.ytimg.com/vi/zxfEiMksZQs/mqdefault.jpg)
I had two significant problems with the quality of the materials in this kit:
1. One of the jacknuts twisted radially instead of axially shrinking, which renders it useless for mounting the spoiler to the body of the CRV. It appears that the jacknut threads were galled or irregular.
2. The threadlocker material in the flange nuts to mount the high mount tail light cause the bolts to strip out the plastic in the high mount tail light. This prevents mounting the high mount tail light.
the sexiest how-to ever
That would be an unfortunate yes however since it is a LED bar chances of that happening are pretty slim.
Looks great but the process to install it take some time and you need some tools for the job..looks so complicated..
Hay Allah razi olsun, I've been looking for this so long, finally i got what i need. Thanks very much
Thanks for posting this video. It was really helpful. I do have have a few questions though. I noticed that when I mounted the high-mount brake light on the spoiler it doesn't seem to fit flush with the spoiler. There tends to be a gap on the top left and right sides of the high-mount brake light. Basically, the area on either side of the rubber gasket. Is that normal?
I was thinking of sealing that area with clear caulk, but I wanted to check to make sure I didn't do something wrong before doing so. Also, my kit didn't come with a rubber plug for the high-mount brake light. Is that really needed? If so, where can I get one?
Thanks!
I would contact the seller for help just in case the part you have is not a Genuine product.
@@CollegeHillsHondaAccessories No, it's a genuine Honda spoiler. Are you sure Honda didn't modify the high-mount brake light design? The back of mine versus some of the others I've seen is different?
@@idealynx The part didn't go through any updates to our knowledge. We actually had a customer car in the shop this morning that I looked at. I did not notice what you are describing.
Can I please ask how to remove the interior panel of the tailgate itself? I accidentally dropped the connector to the license plate light in the hole from the outside and need to retrieve it... thanks!!!
I would never ever allow anyone to drill such holes in the body. It rips the heart off the chest when I see that drilling process. Rust will come out in 2-3 years
We've never had a problem.
Touch up paint, seals, and weatherproofing are used afaik
Hi, the LED in the spoiler went out. There is power getting to the led. Do you have any suggestions as to what I can do . Thanks
I would like to install on of these spoiler on my CRV but it dose not looks OEM and dose not seems to goes well with the hatch. Why can they make a better fit or conform to the tailgate as with other SUV, like the HR-V etc...
Can you please share the video how automatic dimming mirror (08V03-T0A-100A) is installed in a 2012-2014 CR-V.
I'm sorry but we do not have a video available for that item.
We’re you get jack nuts square ??
Great video. I got a unbranded one. What size jacknut is that ? Also i have no template know where i could fine one.
M6 jacknut. The templates only come with the new product. They are not offered separately.
Hope this is available in Australia for shipping
Thanks
What are the dimensions for the template? My Spoiler did not come with a paper template
now thats a CRV :)
What size of drills do you use or what equivalent standard size can be used for that install?
Please refer to the installation instructions for details. www.collegehillshonda.com/instructions/crv/2012/tailgatespoiler.pdf
Do you have to remove the spoiler to replace the bulb?
No.
College Hills Honda can you show me how thx
I'm sorry but we do not have a video showing the process.
Do you sell those Jack Nuts? Are they stainless steel?
HOW MUCH FOR INSTALLATION?
is this good for 2019?
I'm after a black spoiler if anyone has one.
What part exactly?
Good video but the 2000s porn music is a bit much
Terrible audio track
The music would have been okay, if not for that VERY ANNOYING WANNABEE Barry White "voice-over" wasn't there!