2012-2016 Honda CRV Android Navigation Stereo Installation - Joying JY-HQ153N4GN
HTML-код
- Опубликовано: 2 окт 2024
- I'm making a major upgrade to my 2013 Honda CR-V 's factory stereo. I'm installing a Joying Android based navigation stereo system that has built in Android Auto and Apple CarPlay. Joying is the best aftermarket Android based stereo manufacturer. Their units are much higher quality than most Android based systems available. This unit supports any Android app and has the google play store installed so you can download any app you want. It has a digital signal processor built in and supports digital audio output as well as a built in 4g LTE modem and wifi. In this video I show you how to complete the installation of the system and how to connect your factory backup camera to the Joying stereo. You can buy this stereo with the link below.
ebay.us/9EiOxr
As an eBay Affiliate I earn from qualifying purchases
Disclaimer:
The information, demonstration and any content contained in this video is for entertainment and informational purposes only. We make no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. We shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by us and therefore, we do not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge us or anyone affiliated with us, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.
Thanks for taking the time to put out such great video. I just picked up a 2013 CRV and wanted to add android auto and this was a fantastic help! About to purchase the same Joying unit. Thanks again
Hope you like it. I love it
I bought 10.1 inch for Honda 2012. There is a constant hissing noise irrespective of the audio volume. Anybody facing or faced this issue had a resolve.
Yes, its coming from right front or front speakers?? I tapped into the audio wires for the speakers and put rca plugs on them and plug them into the rca connectors from the aftermarket headunit
Any update on this?
Did the reverse cam wiring like you said, did not work. Any tips ? Crv 2015 my2016
The max volume on my head unit only goes to 30 but the CRV system will go to 40... Does anyone know if a fix for this? I can't tell if it's just a UI glitch or if it actually is quieter than before.
It's not a glitch. That's the max volume-ish. The Joying goes to around 36.
Awesome video, great job and thanks for sharing. Does the unit support "wireless" Apple carplay, or do we have to purchase that as a separate accessory?
This one does support wireless apple carplay but I haven't used it
I have heard that your phone battery gets drained really quickly so one reason to avoid wireless
@@jcjam007 to not drain your battery you can use Bluetooth and use a wireless charging phone holster.
I’ve broken a couple phone connectors picking up a phone that was plugged in charging, I use the magnetic disconnect charging jacks but they have connectivity issues as they get old and dirty there’s not much metal contact so they separate easily
Thanks for this. Does dynamic trajectory reverse lines should support from camera or steering? Also cant we use both screens on reversing ?
If it had factory dynamic trajectory then it will work on here also. My 2013 did not. Yes, both backup screens do work.
I know you might not be sure about the answer to my question but do you know by any chance if i can use the headunit ground wire (black) instead of the IMID ground (the rest is the same as yours)? i just need to tap to as few OEM wires as possible. Great video by the way, the best i found by faaaaaaaaaaaaaar
Great video, excellent instructions and narration.
Awesome video series, I just installed the 10.1 inch Single Din Joying Unit. Everything is working great thanks to your instructions in this video. I am trying to splice in the back up camera. You mentioned that White wire A3 and Red wire A19. You count 3 wires from the right is the Ground Wire. The Red is the Power. Then you say on the cable you use the center to connect to the Red and the outside connects to the GREEN Wire. Can you see my confusion? I cannot find a wire diagram. Can you make this clear? Because obviously it worked for you. Thank you!!
I just installed my 2014 EX-L (no nav) last night. It is A3 (white) and A19 (red). Works fine and it shows on both screens.
@@ddbobrow Thank you for responding. So as stated in the video, on the yellow composite cable, the outer part of the cable goes to the white wire on the harness and the inner part goes to the red wire? Just to be clear.
@@ddbobrowSo I figured it out. It is indeed the red 19 and white 3 wires. I wasn’t plugging in the harness back into the iMid screen. Learning experience right there. Thanks for making me realize that.
@Naximus did you solder the wires together when you spliced it together? I'm planning to purchase the head unit but have no experience soldering and was wondering if there is an easier way to do it?
Just had a question, I just installed it but I'm not getting any audio out! Any suggestions?
I tried the backup camera the way you explained but not working. Could you confirm it is white wire and red wire or white and green? Please help me with why my backup camera is not working. Thank you
I confirm that the 2 wires are white wire (connect to ground) and red wire (connect to the CAM signal), both comes third on the 2 sides of the socket.
Enjoy!
How do you mirror the backup camera on the joying radio?
Its in the video starting around the 9:00 min mark
my imid screen refuses to turn off even if the car is off. i notice 2 quarters in the cd slot and took them out im thinking of taking out the cd player
I have the same problem, do you find any solution? @Jack of All Master of None maybe do you know why this could happen, the small screen is always on and even i can change the modes with the car completely off
@@josequirama did you find a solution? I have the same issue with Junsun
Great video! You actually explained how you did it, appreciate it.
Great video , how many rca outputs does it have and the rca voltage and can you hook the lane assist
I installed an 10.1 android touchscreen, works and fits great. I found instructions from you on youtube and followed to a T. When you spliced into the rear view camera it worked fine for me, I used the same wires and method and the small info screen will not shutoff when the key is taken out of the ignition. The camera did work as well. But again the screen didn't shut off. Any help would be great thanks
I have no idea, other than something from the stereo may be back feeding into the imid screen, keeping it on, via the video wire. But that's just a guess.
Hey what is the code that you put in?
A guy would only need the honda for the old radio?
3368 to access factory settings... Yes you would only need the factory radio code if you wanted to install the factory radio again someday
@@JackofAllMasterofNone So the 3368 you entered is to set this new head unit to the old honda radio default settings
Sorry I don't quite follow
@@clarkmackarenko7103 3368 is the PIN you need in order to access the Factory Setting on the Android Unit. So that you can view and/or change settings if necessary, you will need to enter that PIN when you select "Factory Settings".
Ahhhh
Haaaa
Now I get it
THANKS
So now
When Jack here updated to the head unit that has the volume
Did he have to do that solder trick on the little screen?
Is there a way to disable that beeping every time you interact with it? I find it very annoying.
Yes. It's in the settings. Touch sound..
I know it’s a longshot that you may answer but I truly need some help. I’ve followed your video to install my android hu to a 2014 honda crv. However now I can’t set the car time, in the small display above the hu. The volume works just fine (after finding about canbus in factory settings). So now i’m stuck with the Android Hu showing the right time, while the car is completely off. Any chance you might have an idea of what I could do? Thank you
If it's connected correctly the head unit sets the time on the cars screen automatically. Make sure the canbus wires and plugged in correctly on the back of the radio. Do the steering wheel controls work ok?
@@JackofAllMasterofNone no they didn't work. I had to go into android factory settings and set the canbus type to honda. For those that have issues with steering controls not working go into factory settings use your provided password (in my case was 8888) then choose canbus type --> honda --> crv, then your model year. Thanks Mate
Can I ask which trim of 2014 you have? Want to check if we have the same one before I purchase. Thank you!
Thanks so much for making this video. Just wondering, did the usb port you installed come with the kit? If not, then would you happen to have a link to the one you used? Thanks so much
Did not come with kit. Here is what you would need. amzn.to/3dzevdq
In back of joying unit there are 2 USB ports, one is OTG and other one normal. I plan on retaining original USB in center console (buying the recommended wire to keep that functionality that you listed in newer video of 2016 Honda CRV), if I want to add one like you did in front , which one do I plug Into OTG? Is it possible to add another USB female into glove box if I want to plug hard drive ? Didn't see a third USB on the unit? By the way your videos are very well made and greatly appreciated. Reassured me and convinced me to buy the new android 12 unit. Thank you !
How in the hell did you tap into that harness. I tried to but those wires are so damn small
Does the voice button on the steering wheel work with Android Auto?
No.
Great video. Anything more updated for the 2014 CRV in radio setup
Do you have a solution for the poor audio at speed for the mic? Calls are horrendous if the car is in motion making using the unit for calls worthless. Any help is appreciated.
I don't personally use the Bluetooth audio but this is a common complaint. Some people have had luck with using a aftermarket microphone in place of the included external microphone but I'm not sure which one works best
@@JackofAllMasterofNone thanks for the reply. I found a solution where shrink wrap is applied to mic jack port exterior to pad it from the containing box. The thought being when the metals touch is the issue. Didn’t work for me.
Normal view
Normal vieeewww
NORMAL VIIEEEEEWWWWW!!!
Do you know how to make the steering wheel control works? 😊much appreciate ur help
They are plug and play. Should work out of the box. The volume and left right and source. The voice button and cell buttons will not work.
Ok thanks so much. It works now.
And do you know my time display upscreen not syncronise with big screen? Thanks once again😊
nicely done! thank you. Does that head unit support HD radio? Did you change the factory speakers? I'm shopping for a CR-V to tow behind my RV--but need an audio upgrade!
It does not support HD radio. Unfortunately HD radio is proprietary to North America so it isn't a priority for the rest of the world. But the FM stereo is excellent and sounds great.
@@JackofAllMasterofNone dang. that's a deal killer for me. thanks for the reply. Do you do installations? :)
I just installed one but now the top screen will not turn off once my car is off, any ideas?
Hi, I have a 2013 CRV EXL without navigation, with factory amplifier and factory subwoofer. Were you able to keep your subwoofer working with this Joying unit? Any special cables?
Didn't have a factory subwoofer. Sorry. I would reach out to the seller for compatibility details.
My steering wheel buttons no longer work to control volume or skip song, also my factory screen above now does not turn off when I turn the car off (kills the battery over night) any idea how to fix? I tried disconnecting the battery already
I'm not sure. Sounds like a canbus issue though. I would reach out to Joying directly and ask them.
What size screw did u use to put the hazard light in because u didn't use the factory one?
I don't know the size. Just had a slightly smaller head. I had them laying around.
Any recommendations on wehre i can find the wiring diagram for my 2013 Honda CRV EXL
Do we need an adaptor for factory camera to show up?
It requires custom wiring because the factory camera is displayed on the imid display. It's all in this video
I know that the clock on the Honda small screen does not update itself anymore after the installation, but I'm wondering if now you may have discovered a workaround?
I do not have that problem. It is updated from the head unit. Might want to double check the canbus settings and / or reach out to Joying themselves and see what they say.
show me where is your shop at? I will bring mine to you to instal it
Thanks for the video it's very helpful. I have a 2014 Honda CRV and while connecting my harness I ended up one connection short. My factory radio has 5 plugs and my harness only came with 4 plugs. Is there a different harness or is the 5th plug unnecessary?
Depending on the trim level you may have an extra plug. It should not be necessary just use the four that you have and see if it works.
Thank you for this video!!! Is the video tap the same for a 2016 crv lx? Is the center console usb connection off of the radio or off of the imed? I got the adapter!!! Thank you!!!
USB is off of the imid display.
Watch this video
ruclips.net/video/90UcjAd9SQI/видео.htmlsi=AkF1Y3QlFQPmIirR
I had a 2013 crv ex l, it has navigation screen and I want to upgrade the system.
Is the unit 2 Din, does the Joying unit comes with all wiring and connectors needed, is there any additional parts needed ?
The physical size of the PC box is single din. It comes with everything and is plug and play.
Question about the USB port. What is the extra USB port used for. If I skip this step and still use the USB port in the center console without an extra adapter, can I still use apple car play?
The USB port in the center console does not connect to the stereo, so it won't work.
Great video but you lost me at the bracket transfer where did the new unit come from was it included.
Not OP, but you have to reuse the existing brackets on the factory radio and transfer them to the new Joying headset or whatever headset your are installing assuming they don't come with the mounting brackets.
Good stuff. I'm surprised the CAN bus doesn't carry the steering wheel position information that the backup-cam overlay would need.
Why does this one look different than the other version? The volume knob is in a different location
This is the older model. They have since updated the unit.
I'm planning to purchase the head unit but have no experience soldering and was wondering if there is another/easier way to do it? Like. Could I buy some sort of adapter to tap into the wires for the video? Any advice would be greatly appreciated.
Unfortunately if you want the backup camera on the big screen, you have to do it yourself. Or hire a stereo place to do it. There is no adapter for it.
Where exactly did you splice the wires together? I’ve watched over and over and not following
Did you ever end up doing that subwoofer video? If so, what's it called? I'd drop a like!
Sorry dont have a video. Subwoofer is easy though. Just power, ground, remote wire and RCA's. I used a Pioneer sub with build in amp. Works great. amzn.to/3Jb6NTY
I have a kicker pt250 that's powered and all, but when I run the RCAs from the splitter to the sub (speaker wire that I turned into female RCAs) I'm not getting any signal. Any tips?
I’ve been considering doing this on my niece’s car.. good install
Is the installation sequence similar for the CR V touring model?
For the most part, but there are some differences. I would reach out to joying directly for more information as I have not installed one in a touring personally
Is the radio unit from your link, the same as the one you installed? Looks different?
The unit has been updated. It's even better now. Has only 1 physical volume button and a slightly larger screen. I have an updated video on it as well.
Hey, I haven't watched the entire video yet only skimmed through it. I'm installing an android unit for a customer of mine and I have a couple of quick questions: Is it necessary to drill a hole for the USB? Or is that an optional feature? Also I saw you spliced a cable/cables for the camera. He does not want a camera so I will not need to do that. However I wonder if there are any other cables that need splicing?
And lastly, since he doesn't want any optional features, does everything I need come in the package? Thank you. Will watch the entire video later I just haven't had the time!
The USB port is optional. You could have one coming out in the glove box and the customer could just use that. There is also an adapter to let you use the factory USB port. This is what I recommend. amzn.to/3urloD3
There are no other cables that need splicing if you just stick to the factory backup camera setup on the iMid screen
Boss got mine and installed, same 2015 crv ex but mine have turn right cam, but it didnt work that cam..
Did you enable the turn signal cam in the factory settings app? Also it has to plug in to the aux input yellow RCA plug
How to able the turn signal in settings? I pay to install it.
Hey question why is the screen so dark but not the imid do you know.
What do you mean by dark?
green for negative(-) & red for positive(+) ty very much!!!
Regarding splicing into the backup camera wires... where do you find the wire diagram so I can check and see if my 2015 is different than the 2013. Can you recommend what I should search for?
It’s the same.
What if i want to just use the reverse from the stock screen on top can i just leave it alone and it shoukd work right?
Where can I get the part you mounted the brackets on to mount behind the face
Are you talking about just the CPU unit? Aka the metal box? If so, Joying may just sell you one if you reach out to them.
I’m looking at the JY-HZ117N8
Good Unit. It is BIG!!! Will slightly block the A/C vents but isnt bad. ENJOY!
can this play XM radio? and if so.. will an apple car play connection (e.g. iphone) be able to play the xmradio.. and switch the audio to phone calls or map directions playing on the phone? My newer C-RV model has this already installed and i am able to play xm radio and have map directions overlap with the music whenever the map app gives new audio directions.
Does not work with XM
Hi, I've a 2016 crv 2.4 auto. I tried upgrading from the stock system as it has problems with its display. Tried installing a few well known brands, but none of them seem to connect with the controls on steering. Any suggestions?
Did you use this brand? The steering wheel controls are canbus based and need a properly programmed interface to work.
Hi,
I really hope if you can answer my comment if you see it
I am doing the stereo removal just like the beginning of your video. When it come to 3:08 in the video(like you mentioned there are two clips on the top), do you know if there’s any clip on the bottom? I got stuck at this step,I unclip the top 2 clip but I was not able to pull out the unit because I feel the bottom was stuck. I saw a orange piece at tue bottom of the inner side but I don’t know if that have to do with this? Please help me! Thank you so much
Just have to yank it hard after the screws are out.
Wait. So your crv didn't come with navigation from the factory? You know If I can use existing antenna for gps?
Existing antenna will not work.
@@JackofAllMasterofNone sweet. Thanks. Good to know. I have an upgraded honda touch screen but the sound quality is terrible and just out dated. Great video to get me preped for a new head and possible amp/speaker upgrade
How is the audio output? In my experience with these units in the past they look fantastic but sound much worse than when using the stock radio.. have they improved these?
1000% better than stock. Better than Pioneer and Kenwood too. They have come a long way.
My top screen won’t turn off any ideas
Sorry, no idea. I would reach out to Joying directly.
Hello. Did you ever manage to resolve this issue?
Does this head unit support the right side blind spot camera? I would like to keep that function.
Yes
im installing this now but the right cam doesn’t work even with the settings turned on.
Does the three buttons on the steering wheel still work with the new head unit?
ruclips.net/video/90UcjAd9SQI/видео.html
Can you wire the USB to the existing 12v right there?
? I don't understand. Wire USB to a 12v?
Helpful video and easy to follow
Can’t seem to have my oem reverse camera to work and the steering wheel button
Sounds like the can box setup is wrong in the factory settings or is not connected correctly. Reach out to Joying if you need help
I want to get it but impossible for me to install it ,
Why? It's plug and play
9:16 Regarding the backup cam wiring, My Atoto F7 wiring harness have the Rear Camera+ wire, where would you tap that? I'm guessing it's a reverse wire to activate the cam feed on reverse? Did you figure out why the cam feed does not show on both screen? Thanks for this!
I had a poor wire connection. That's why it didn't show on the upper screen. I resoldered the connection and it now shows on both screens.
Hi, i have the Aux mode showing on the small screen on top but this prevents the bigger satnav/radio screen from activating, just happened by itself, at least i don't know that i did anything to upset the system, can you please advise how to deactivate the Aux function will appreciate it, thanks.
Not sure how it did that. Sorry
Do you have to press the "car link" button every time you want to turn android auto on? I was going to get this unit and a wireless android auto adapter to avoid plugging my phone in, but I hate the idea of having to press a button every time i get in my car in order to turn android auto on.
A setting in the carlink app is auto connect. So you wont have to open the app. But I can only confirm it works with a wired setup. Not sure about wireless.
Hello !
I am just curious how the reception of the FM stereo is ?
Is it comparable to the stock stereo or better ?
Comparable. Not better
I got a 2016 CR-V Touring it has backup camera with multiple views will this work for me?
This does support multiple views. All CRV trim levels have that. I'd reach out to Joying for exact compatibility with your model though. Mine was installed in an LX model which has a lot less built in features than a Touring model.
@@JackofAllMasterofNone one more question what about my right turn camera will that still show up?
@@Foxtrot2050 Yes it does support that
Hi - my honda has a built-in amplifier, after connecting the android radio and powering the amplifier, I have a lot of noise, the sensitivity of the volume control is too high. Do you know how to fix it?
Im sorry I do not. Might want to reach out to Joying customer service.
@@JackofAllMasterofNone ech... the android radio I bought is a piece of sh... At first I had no sound at all. So I started searching in the internet and I found, that harness has no wire to activate the amplifier. I made this connection by myself and the speakers started to work. But there was huge noise level. I contacted the seller and he gave me instructions that I have to remove one resistor from the main board of the radio. It helped but still volume level is too high. Additionally the buttons under the steering wheel don't work - I mean the phone buttons.
@@mareq12 so did you buy the joying stereo or another one?
The phone buttons will never work because they are resistive and are connected directly to the imid screen But the regular steering wheel buttons like volume and mode are sent over the canbus network in the car.
@@JackofAllMasterofNone I bought my radio on Aliexpress, looks different than yours. Finally I made the phone buttons working. I connected Bluetooth (Honda HFT) pin number 15 (32 pin connector) with key1 wire of the android radio. Then the radio can read these buttons as well.
@@mareq12 Good information
The model in your ebay link looks different--do they no longer make the one you installed in the video?
They improved the stereo. Its the updated model. Has a better screen and only the volume knob on the left side. New user interface. Better hardware specs but essentially the same thing.
Why my turn signal sound not working?
What does that have to do with this video?
Hello , can you help me please? I have the same little screen and it is not sync with the clock of my joying car radio. How can I do please ? I really need your help :( thank you very much !
I can't adjust my clock 😔
It's probably a canbus setting issue. You can contact Joying customer service for help.
@@JackofAllMasterofNone do tou think the problem come from the canbus box ?
I have a 2013 honda crv with the factory gps screen, I bought an android car stereo and it works fine except I can't adjust the clock on the small top screen because crvs with factory navi screen are automatically synchronized with the gps, and I do not have this setting on my small screen to adjust the clock. Have you a solution to adjust the clock on the small screen , or a solution for add the "adjust clock" option please ? Thanks 😊
Thank you for the great video. I've been holding for a while but finally pulled the trigger and ordered the unit. $425 + tax now. Hope the steering wheel Phone buttons will still work.
The direction and volume controls still work but the phone button does not work. I think with a little more custom wiring, they could be made to work.
@@JackofAllMasterofNone arent the phone wires being sent to canbus ? I would expect that they just need to be taken by the joying device.
@@charlesrg no. The phone wires are separate and I believe on an old fashioned resistance based setup tied to the top display directly.
Thank you for your video.
Did the install today. Now trying to find a way to get the Honda USB factory to connect. Found some adapters that might work.
When installing yours did you had one gray 8 pin connector left disconnected ?
I’m trying to find what that it does.
After installing I only had audio after turning on the Amplifier in the settings menu. However Audio is not as crispy as my original radio at high volumes.
Looks like if I paste a link my comment disappears. I've found an adapter cable for the camera, another cable to re-use the original USB and another for the under the seat subwoofer but I can't share the links as the comment gets removed.
the responses to this unit on amazon are lukewarm.
This unit isn't on Amazon
I just bought a 2016 Touring trim. Which Joying model will fit best?
I would contact Joying directly. This unit will work, but will require a different harness than the one I used on my LX model
They will send the harness you need.
@@JackofAllMasterofNone thanks! I been hearing about idatalink maestro. Will that work in order to retain both cameras and the steering wheel controls?
@@Gbuck426 You don't need it with the Joying stereo. It has its own canbus interface. Everything is included with the stereo. You don't need to buy anything else.
too much trouble!
im not seeing this exact unit anywhere? can anyone post the link where they got it? That model # is not coming up? Thanks
This exact unit was replaced with a newer version that has a single volume knob. It is much better with a nicer screen. Here is the link to it
ebay.us/9EiOxr
Thats what I kept seeing thanks for confirming that. So I ordered it and was kind of a pain with my bank as they thought it was some kind of fraud but got through it. How long should I expect till it makes it here to the US as I still dont have any tracking numbers? Thanks!
@@RandyWhitmore-r3m If ordered on eBay it can take a few weeks. It's not Joying fault. eBay uses a speedpak shipping service that isn't super fast, but isn't real slow either.
I actually ordered it through the joying website and its been a few days since my payment finally went through but it said they could send a tracking number when it was ready to ship so no big deal just curious. Thanks again for your help!! cant wait!
Is there another place I can find this? It out of stock on eBay :(
Unfortunately it just went out of stock and I'm unsure if it will come back in stock. If you don't mind not having physical buttons they make one with an even larger screen and newer operating system. amzn.to/3qfuf99
Wow, this is awesome! Thanks for this video. Can it support wireless carplay?
Supposedly it can! I have not used it though.
Could you send me the link for the purchase? Thanks you.
ebay.us/9EiOxr
Hi did you get a conector for the oem radio harness to the new radio?
Thanks
It comes with the stereo. plug and play
the dash bord look great with radio
How do you change the time on the original clock?
The time on the stereo sets the time on the original clock via the canbus network automatically
Installed a 10.1 unit in my 2018 EX Nav model(UK) and have 2 issues that I am trying to resolve with Joying, maybe you can help🤞
1/ there is no cable supplied to connect the factory USB ports!
2/ the radio does not display on the i MID screen. I do have a connector left over from the Joying canbus wiring, with just 2 green wires, they say its a GA-BUS connector, would that be it?
Does the sleep mode drain the battery? Sleep when acc off that is
It's only a small current draw and if it senses the battery is too low it will completely turn off
@@JackofAllMasterofNone thanks. I got a different brand I was wondering. Mine always playing a low radio frequency in the background idk what's causing that. I had to cut a wire into the antenna wire to get sound, didn't get when I splice the amp wire into the rca. Beside that I noticed one harness left out I'm wondering if it's the factory subwoofer got left out . Have the premium system EXL 014
I just installed this unit in a 2015 CRV EX. Everything works but I cannot get the bottom flush with the dash, only the top is flush. All clips appear to line up, including the four on the radio, but the bottom is never flush. Any suggestions?
Remove the bottom clips and try again.
@@JackofAllMasterofNone The problem was that the radio was too close to the back of the screen, so I moved the mounting brackets forward on the radio allowing the radio to slide back (toward engine). The screen frame is now flush. the top went in fairly easily, but the bottom of the frame took quite a bit of force.
Also, I used T-taps to splice into the red and white wires you used to feed the backup camera to the new display. It was difficult as those wires are very slim (22 gauge?) and there is little room to work.
@@robkunz5 I’m running into the same issue. I wound up removing the metal brackets altogether and just connected the back of the screen to the single din holes on the unit. I cannot get the bottom part to seat inside mounting holes (the bottom flat part of the radio bezel). Can you elaborate more what you did to get it all to fit? Did you keep or remove the bottom white clips after you transferred from the factory radio?
@@robkunz5 Thanks for the tip on using t-tap wire connectors to tap into the iMiD harness wires. I assume this still worked with the RCA cable stripped to bare wires?
@@shingdao7 As I recall, yes. I think using the T-tap was the only thing different I did.
Hi can do fixed front camera by this Android?
Yes
Anything with the SiriusXM module?
No. Unfortunately not
Thanks for the great video! I was able to tie into the video wires successfully and also purchased the converter to use the center console USB port. In your video at time 16:18 you talk about connecting auxilliary inputs. Can you tell me more abut that? Thank you!
It's just the white and red RCA provided by the harness. There are 2 of them. One should be for the aux port if your car has one and the other is for the built in iMid sound aka the factory Bluetooth output to the stereo. You have to play with them to figure out which is which and you would just plug the correct one into the RCA in jacks on the back of the stereo. This source can be opened in the stereo.
@@JackofAllMasterofNone Thank you for responding! In my 2013 CRV console, I have a 1/8" female, audio port that is labeled "Aux". Can you tell me where the wire for this aux port is located in the dash and what it looks like? Also, I don't see an output wire from the iMid for factory Bluetooth. Can you tell me what that looks like and where it's at? I'm sorry for asking these simple questions but if you can help me it will save me a lot of time. I appreciate it!
@@danb6416 The Joying harness has the red and white RCA outputs already. They are connected to those factory connections supposedly. You shouldn't have to do anything except plug the right one in to the back of the Joying stereo.
If I dont want the back up camera to show on the radio unit and keep it showing on the smaller top display, can I avoid cutting and soldering those 2 wires?
Yes
Hi, great video. I ordered the radio since you recommended it. When I receive it I'm having issues installing it, was wondering if you might have any ideas. My original radio didn't have only 4 connectors like yours did, it had 9 I guess because it is the XLE with the side camera. I installed it and it's getting power, but no sound when I try to play music. Even with harness it brings, there are still some wires with no corresponding connectors.
I'm sorry I have no idea. I don't have experience with higher trim models. I would imaging you have an external amp that is not hooked up correctly or is simply not getting power.
@@JackofAllMasterofNone i contacted The seller, he told me to go into settings and turn on amp, that solved the sound issue. i found on Crutchfield an adapter to use the original USB connectors to avoid making any holes. The only remaining issues is the HDMI and the Lane watch side camera.
@@etcolonrva did you ever get the lane watch camera issue resolved ?
@@gabem7232 Hi, yes I got the side camera issue resolved, it was the purple wires from the harness that needed to be connected to each other and the video cable from the harness into the video in slot, plus had to go deep in the settings and pick my car make, model and year. Radio is pretty powerful with a lot of settings. The seller was great with the supporting.
@@etcolonrva which seller did you go with?
Where can i order this one?
ebay.us/9EiOxr
They have updated the unit slightly since this video. It is now even better. They redesigned the screen to be slightly larger with a larger volume button.
Does anybody know what the unit is called that the stereo face is connected to ?
The CPU?
@@JackofAllMasterofNone at 16:10, what is that called that you’re connecting the wires to ?
@@kikow.7104 It's the head unit or CPU. Called a few different things
@@JackofAllMasterofNone thanks, I bought a double din stereo and that didn’t come with it
Great video! Thanks for posting it. It's been almost a year. Are you still happy with the Joying? Have you encountered any problems? Any regrets? Thanks!
Excellent unit and company. I have had many different Joying units.
@@JackofAllMasterofNone Did you ever resolve the the problem with the iMID display not matching the stereo?
@@idealynx I had a poor connection to the camera wires. Yes, it's fixed by soldering wires
Thank you! Just to confirm - the splice of the camera wire did not properly work?
It did work, but disables the top screen. Which is fine because I don't want to see it on both screens anyway.
@@JackofAllMasterofNone thank you, that’s how I understood.
I have a backup camera installed with a screen on the mirror. I am installing a radio with a backup cam and wanting to use the same video feed from just one cam. But I am concerned now if I’d lose the video on the mirror that is also a recorder.
@@andreik1775 I'm not sure. If it's an aftermarket camera it will probably work on both screen.
@@JackofAllMasterofNone thank you. Fingers crossed. Never spliced an rca cable before. Used your instruction from the video. I’ll report back.
Didn’t work for me. I spliced 2.5mm 4 pin cable that fed to the mirror. It had 4 wires red, yellow, white and I uncoated. I tried to connect them to the 3 RCA cable wires connected to the second camera. But the second camera from the radio would not receive the image from the first cam connected to the mirror.
Hello and Thanks for this video.
I confirm that the 2 wires are white wire (connect to ground) and red wire (connect to the CAM signal), both comes third on the 2 sides of the socket.
Same camera wires for crv 2014 ex non-navigation model. Not sure if it’s the canbus or something else but both monitors show the backup feed, when I did a install(also different aftermarket android stereo).