@ I removed the hose, and since it was in the middle of the radiator, only I got 3-4 liters of coolant (1 gal), and on internet it was saying its capacity is 7liters. Then I flushed it using distilled water for 3 times with a prestone chemical, and I set it now for a day, and want to flush it again tomorrow and pour in it a good coolant finally I hope I did it correctly
@@merdanchee The way I do it is to drain out as much coolant as possible, refill with distilled water, let the engine run until the thermostat opens, then let engine cool. Then I repeat the drain/fill/run process two more times. Finally, I drain one last time, add 1/2 total system capacity concentrated coolant, then top off with distilled water to get ~50% mix
thank you
Thank you!
What if liquid didn’t come out when opened the plug? Is it clogged? 😮
Remove the radiator cap, if nothing comes out then yes, the rad may be clogged, the valve is not open enough, or the rad has no coolant in it 😉
@ I removed the hose, and since it was in the middle of the radiator, only I got 3-4 liters of coolant (1 gal), and on internet it was saying its capacity is 7liters.
Then I flushed it using distilled water for 3 times with a prestone chemical, and I set it now for a day, and want to flush it again tomorrow and pour in it a good coolant finally
I hope I did it correctly
@@merdanchee The way I do it is to drain out as much coolant as possible, refill with distilled water, let the engine run until the thermostat opens, then let engine cool. Then I repeat the drain/fill/run process two more times. Finally, I drain one last time, add 1/2 total system capacity concentrated coolant, then top off with distilled water to get ~50% mix
Gracias
Does the plug need to come out all the way ?
No, just rotate the plug until the coolant starts coming out of the nozzle
Спасибо брат
would help if you actually showed it working...just saying...