And Power Figure Giveaway is closed - yes the car made it to the dyno and back home! Thanks to all who entered, you'll have another chance at a giveaway soon. Winner will be announced in the new video, working to get that out but won't be for a week or two.
Further, further testing - looks like that 7psi wastegate will hold 7psi up higher with a little spike to 9psi when tipping the throttle in or holding part throttle. Let’s see what shows up on the dyno, coming soon.
I think that you aren’t going overboard with all the engine mods Browney . I reckon you’ve built a tough reliable machine that has a fun factor about it with a bit of get up and go but also reliability for long trips away. Great job mate .
Thanks mate. That was the idea, make something that can still be reliable without stressing, within a reasonable budget, but that can then be built off if people want more. And of course we always want more! Dyno video will be out next week 👍
Hey Browny, good job with the build. I guess it's going to be 264rwKW however I do hope it's a bit more for your sake. A good solid safe streetable tune. Best of luck on the dyno!
i just fitted 2x haltech can gauges last week in a falcon using one of those gauge pods wouldn't recommend was a bit disappointed for a 600 dollar gauge. Had used perfect tuning can gauge's in the past they are very nice feature packed gauge.
Loving the series so far, she's come a long way from the old 16+ second stock BA, let's hope she's around high 13, low to mid 14's for the next drag run, it's a far guess but worth a shot in advance. My guess for the dyno run will be 253kw to the rear wheels, but the more the better Would be sick once you get the manual conversion underway at a later date giving you even more powerrr, it's a pity that the 4spd auto box's rob so much power Take care mate!
Thanks very much mate, it's been a lot of fun to progress with it and it may not be done just yet! Fingers crossed we can dip into the 13's with this, not sure we'll be manual converting it any time soon though. The BTR's are just so cheap, can hold a reasonable amount of power for not a great deal of work and we will have another manual car back in the fleet coming up. Never say never though! Thanks again for watching along mate 👍
Loving the gauges Browny👍 I installed Volts and oil pressure.. as I have an XR8…. I have the same problem with the way that plate sits and only other thing I found was the gauges came out when I accelerated quickly 😂 Just put tape on the inside… easy fix👍
Exactly what I did! I have Tesa tape here, sort of a fabric tape for wrapping electric looms and seems to work great for helping keep the gauges in there. Thanks mate 👍
Loved the vid Browney I've got the two gauge pod but not being a turbo car i have installed oil pressure and volt meter gauges they do look sick...keep the good video's comin matey...John.Willaura...😎
Nice! Shame they don’t have those already anyway, the voltage gauge in the old EB saved me a few times alone - good to have and looks great as you say. Thanks for being here John 👍
9 psi 252 rwkw . A/f gauge and boost gauge really necessary! Hopefully after getting it base tuned you will get a pcmtec lic and tune it yourself. Main tables to look for in pcmtec is borderline knock and the lambda base table as well as AD pedal count from open loop to close loop so it doesn’t stay 14.5 to one at 10 psi boost partial throttle. Look up pcmtec , engine tuning , “ lean out under partial boost “ to see solution? Looking forward to the dyno run !
Thanks Plumbs. Not sure if I'll tune this one but is definitely something I see myself playing with in future. Hard to overcome that learning curve and keep a video interesting if I'm to go that way too though unfortunately so it becomes an extra time suck! Interesting reading your thread on that topic though, something I'll hav eto keep an eye out for in this.
I think it’ll be somewhere between 200-215rwkw considering the stock setup. I know it’s not an exact number but it’s readings can change depending on tuner and whether it’s hub or roller
Fair, dyno figures are always a bit hit and miss, with that level of accuracy anyway. Good for a bit of fun though! Ok with anything in that range anyway, let’s see.
Hmmm.. stock ba xr6t runs 6psi for ~210 to 220 rwkw. Higher compression and more boost, you seem to value driveability and reliability over outright power.. I will say 232.4rwkw. 😎
Sure that’s at stock boost or turned up a little? I know Maxx list around that power for there BA stage 1 not sure on boost level though. Correct, and fingers crossed.
270 kW if the tuners are prepared to push it. Just up to the trans if it flears or not to see it at the rear wheels. Because your car has shift kits Australia kit it should make 270 at the rear wheel anything more and the no turbo trans won't be happy. Good luck mate and thanks for the wonderful video's.
Ba bf f6s have 270kw and they run 7 pound boost and XR6 turbos run at 245kw at 5 pound so if your getting it tuned on non turbo should be 260/270 at the rear wheel. By the way love your channel mate keep up the good content.
Like the logic but just be careful, those quoted figures are at the engine not the rear wheels. Stock XR6T at the wheel on the dyno we’re going to typically are anywhere from 170-190rwkw I believe, not sure on F6. And thanks very much for the support mate, appreciate it and hope you enjoy what we have coming up.
I have seen a stock na plus turbo make 270 at the rear wheels but the btr was not happy and was flearing all gears and had to be turned down to 260 was still flearing all the gears but driving it you couldn't feel it flearing.
Not putting valve springs in it? I would be. Cause we all know once you tune it you will want more power haha. And the valve springs will be holding it way back, Even on a N/A designed engine. These things a tough as even at 15psi on a std N/A engine is easy done :) and reliable. Keep up the good work
I reckon you'll get a high 190 to 210 rwkw. Maybe as high as 220, if you get good conditions. I will change my number when I rewatch the dyno run you did at Dandenong.
I'm thinking you're right in the money there somewhere Glen, have a crack mate 👍. Hopefully towards the higher end but it's a guess for me too still. Will be same tuners, Maxx over in Dandenong.
@@BrowneysGarage thanks Browney. I've watched the Dyno run again and I'm going to stick to those numbers. So I will go with a firm number of 213. Of course I'll be happy if it goes higher but on a percentages game I reckon it'll be this or close to. Good luck when you do the run and you are there to watch (or should that be cringe?) as it gets on the rollers. Also thanks for posting this. I'm now going to fit those gauges to my N/A station wagon! Looking forward to the turbo noises I'll be making as I drive it!
@@glensgraphix Like you're thinking, happy either way. It'll likely be a 'drop it to do when they get time' as they're so busy, but the guys will film it for me. Meanwhile I'll be pacing and nervous peeing every 30 mins or so I assume! Could always hook up fake dose/BOV noises while you're there? 🤣
Looking awsome mate great video my guess on rwkws would be 220 rwkws only because pretty much stock but could be wrong ever way just having a guess more important loving the videos and ur doing awesome job im actually thinking about getting xr6turbo doner car for mine one day and straight swap all good bits
Thinking right around here myself, and I’d be good with that for now. Fingers crossed. Donor car would have been ideal but even those are getting pricey!
@@BrowneysGarage yeah if was me personally if was more i turn it down abit to be on safe side till u open up that motor to hold more hp and biggest worry be that btr
Stock ba xr turbo has roughly 220rwkw (apparently) and as your car has all the stock turbo gear and na spaghetti rods I’m gonna guess around the 255rwkw mark
Mate if you don't mind me asking, how many metres wide is your garage? I'm thinking of building a new shed with plenty work room and yours looks big enough.
Of course not mate, it's 6m x 6m x not nearly tall enough. The width for anything I've worked on so far has been pretty good even with a largish bench and storage. Have run into, and sure I will more in future, issues with it not being deep enough. Enough to work on engine bay, remove front bumper etc but only when you don't want to work on anything behind the car too. And was out of room when doing the diff removal by itself so engine out or similar would be an issue, another meter or so would help a lot. Go as big as you can I guess, and if you're lucky to go tall & big enough for a decent hoist even better, would be a game changer! Good luck
with 9psi i would say 268rwkw being a higher compresion than my turbo motor with similar mods and 12.9 psi gets 300.9 rwkw and has run as quick as 12.4 mid 13's for you i think. although AFR is a good thing what is more important is a oil pressure gauge as we dont want to wait till the idiot light lights up now do we Brownie ?
Geez Browney I was unfortunately close 😎I reckon you are itching for some more now mate, look forward to seeing the 1/4 mile time and more vids, keep up the good work ! 👍
Silly question, but what relay and connectors did you use for the wideband? What else did you use for it? I have the same wideband kit looking to install!
I listen to a heap of podcasts, better than the voices in my head! But I have been getting back to more music and listen to a huge and weird range of stuff, Rise Against, Hilltop Hoods, AFI, Incubus, Grinspoon, Iron Maiden, Gaslight Anthem, Highly Suspect, Five Finger Death Punch, Blink 182, Linkin Park, Avenged Sevenfold, Slipknot, Disturbed, on and on it goes. Hell even some old house music or stuff like Dido and Florence and the Machine get a run.
262rwkw, but i guess its all up to your tuner and how far he wants to push it vs how long you want it to stay reliable. anything above 220rwkw with chu chu sounds is a bonus
Hey mate I have the same car as yours,the stock airbox was taken out when I got it.i really need to find the intake hose that goes from the turbo to the air box.would you know where I can get that hose from? If u could let me know it would be appreciated mate
Edit: 245.7rwkw I'll be replacing my clock with gauges even tho mines 5.4 na. Oil pressure and oil temp gauges. Where I live it regularly hits 48-49 degrees Celsius with roads literally melting so I'd like to keep an eye on oil pressure and temp.
And Power Figure Giveaway is closed - yes the car made it to the dyno and back home! Thanks to all who entered, you'll have another chance at a giveaway soon.
Winner will be announced in the new video, working to get that out but won't be for a week or two.
Hopefully I just squeezed threw, but either way, hope it's the best it could be, fingers crossed man!
It's better to buy a stock Barra XR6 and change the con rods and pistons then buy a good after market turbo/ intercooler and high quality waste gate.
Further, further testing - looks like that 7psi wastegate will hold 7psi up higher with a little spike to 9psi when tipping the throttle in or holding part throttle. Let’s see what shows up on the dyno, coming soon.
234 rwkw’s is my guess mate. All the best
I think that you aren’t going overboard with all the engine mods Browney . I reckon you’ve built a tough reliable machine that has a fun factor about it with a bit of get up and go but also reliability for long trips away. Great job mate .
Thanks mate. That was the idea, make something that can still be reliable without stressing, within a reasonable budget, but that can then be built off if people want more. And of course we always want more! Dyno video will be out next week 👍
Amazing Hanson pun 😂 hd to go back and watch twice
Hey Browny, good job with the build.
I guess it's going to be 264rwKW however I do hope it's a bit more for your sake. A good solid safe streetable tune. Best of luck on the dyno!
i just fitted 2x haltech can gauges last week in a falcon using one of those gauge pods wouldn't recommend was a bit disappointed for a 600 dollar gauge. Had used perfect tuning can gauge's in the past they are very nice feature packed gauge.
Interesting, is this because they were limited in the data they could display from a Falcon? Or just a little underwhelmed by comparison and pricing?
An enjoyable 226rwkw, thanks for the series
No thank you for actually watching it! 🤣 That would be enjoyable, fingers crossed.
Love the content Browney, I’d say the final numbers will be a solid 249kw. Keep up the awesome work mate💪💪
Thanks very much mate, and good luck 👍
Browney, you just keep hitting it out of the park. Love watching these. at 9 psi I'm guessing 248rwkw
Thanks Jimmy - we're really going to find out about that in the next one though, dyno won't hide any mistakes!
Loving the series so far, she's come a long way from the old 16+ second stock BA, let's hope she's around high 13, low to mid 14's for the next drag run, it's a far guess but worth a shot in advance. My guess for the dyno run will be 253kw to the rear wheels, but the more the better
Would be sick once you get the manual conversion underway at a later date giving you even more powerrr, it's a pity that the 4spd auto box's rob so much power
Take care mate!
Thanks very much mate, it's been a lot of fun to progress with it and it may not be done just yet!
Fingers crossed we can dip into the 13's with this, not sure we'll be manual converting it any time soon though. The BTR's are just so cheap, can hold a reasonable amount of power for not a great deal of work and we will have another manual car back in the fleet coming up. Never say never though!
Thanks again for watching along mate 👍
Loving the gauges Browny👍
I installed Volts and oil pressure.. as I have an XR8….
I have the same problem with the way that plate sits and only other thing I found was the gauges came out when I accelerated quickly 😂
Just put tape on the inside… easy fix👍
Exactly what I did! I have Tesa tape here, sort of a fabric tape for wrapping electric looms and seems to work great for helping keep the gauges in there.
Thanks mate 👍
Great episodes mate,keep up the good work.
249kw that's with tuner being safe.👍
Thanks mate, hope you enjoyed this one and good luck 👍
Good stuff Browney.
226 kW
Loved the vid Browney I've got the two gauge pod but not being a turbo car i have installed oil pressure and volt meter gauges they do look sick...keep the good video's comin matey...John.Willaura...😎
Nice! Shame they don’t have those already anyway, the voltage gauge in the old EB saved me a few times alone - good to have and looks great as you say.
Thanks for being here John 👍
9 psi 252 rwkw . A/f gauge and boost gauge really necessary! Hopefully after getting it base tuned you will get a pcmtec lic and tune it yourself. Main tables to look for in pcmtec is borderline knock and the lambda base table as well as AD pedal count from open loop to close loop so it doesn’t stay 14.5 to one at 10 psi boost partial throttle. Look up pcmtec , engine tuning , “ lean out under partial boost “ to see solution?
Looking forward to the dyno run !
Thanks Plumbs. Not sure if I'll tune this one but is definitely something I see myself playing with in future. Hard to overcome that learning curve and keep a video interesting if I'm to go that way too though unfortunately so it becomes an extra time suck! Interesting reading your thread on that topic though, something I'll hav eto keep an eye out for in this.
Its a barra, im aiming for the moon! 286KW after some page ups. Good luck on it holding but it wont need it. BARRA THE WORLD
Would love some page ups but not possible yet without boost controller. Thanks mate 👍
‘Straya’!!! 🇦🇺
The beards coming along nicely Browny your cars looking nice keep up the great videos
Thanks mate 🤣. Will do, getting to the fun part of this series now 👍
@@BrowneysGarage with the car or your beard?
@@glensgraphix ...both!? Big reveal at the end of the series that I'm going to start modifying the beard maybe? 🤣
@@BrowneysGarage a Captain Sparrow one! Plaits and things in the plaits. Time for the wife to earn her keep doing them I reckon.
@@glensgraphix If she sees that I'm in trouble! Has been asking to do a Christmas beard with glitter and what not for years!
Job well done Browney
Thanks mate, enjoying the end result of this one! 👍
Will make around 240mark. 242 is my exact guess. Love the vids
Love the vids browney best of luck at the tunners I hope you get 264 kW
Cheers mate, I’ll take all the luck I can get 👍
Love this channel keep the great work up brownie
Hey thanks very much Stephen, hope you enjoy what we have coming up 👍
I'm guessing about 262rwkw.
Loving the series and looking forward to the track day vid.
Me too mate, keen to get back out there. Hoping to hit Heathcote around mid June all going well, with video to follow some time after that.
Very neat and tidy work mate. Well presented videos too. Hope you can get 254kw or more with a safe tune.
Thanks very much mate, it came together alright. Cheers 👍
I reckon it will make 265rwkw. Love the videos mate been loving your videos for a while now
Thank you very much mate. Not sure we’ll get that high but we can dream 👍
I think it’ll be somewhere between 200-215rwkw considering the stock setup. I know it’s not an exact number but it’s readings can change depending on tuner and whether it’s hub or roller
Fair, dyno figures are always a bit hit and miss, with that level of accuracy anyway. Good for a bit of fun though!
Ok with anything in that range anyway, let’s see.
I'm going to say 242rwkw good luck mate another great video
🤞 Would be very happy if it did, we'll see. Thanks mate, hope you end what's coming as we near the end of this series!
Hey mate i reckon the falcon will make 228kw to the wheels
Hmmm.. stock ba xr6t runs 6psi for ~210 to 220 rwkw.
Higher compression and more boost, you seem to value driveability and reliability over outright power..
I will say 232.4rwkw. 😎
Sure that’s at stock boost or turned up a little? I know Maxx list around that power for there BA stage 1 not sure on boost level though.
Correct, and fingers crossed.
270 kW if the tuners are prepared to push it. Just up to the trans if it flears or not to see it at the rear wheels. Because your car has shift kits Australia kit it should make 270 at the rear wheel anything more and the no turbo trans won't be happy. Good luck mate and thanks for the wonderful video's.
Thanks very much mate, and I’d be over the moon if I got anywhere near that.
Ba bf f6s have 270kw and they run 7 pound boost and XR6 turbos run at 245kw at 5 pound so if your getting it tuned on non turbo should be 260/270 at the rear wheel. By the way love your channel mate keep up the good content.
Like the logic but just be careful, those quoted figures are at the engine not the rear wheels. Stock XR6T at the wheel on the dyno we’re going to typically are anywhere from 170-190rwkw I believe, not sure on F6.
And thanks very much for the support mate, appreciate it and hope you enjoy what we have coming up.
I have seen a stock na plus turbo make 270 at the rear wheels but the btr was not happy and was flearing all gears and had to be turned down to 260 was still flearing all the gears but driving it you couldn't feel it flearing.
No chance
Not putting valve springs in it? I would be. Cause we all know once you tune it you will want more power haha. And the valve springs will be holding it way back, Even on a N/A designed engine. These things a tough as even at 15psi on a std N/A engine is easy done :) and reliable.
Keep up the good work
love your vids mate .. keep up the good work
Thanks very much mate.
I strongly believe you’ll make a solid 273rwkw
I can't remember if you did the valve springs in an earlier episode, so I'll say 257kW. All the best on the dyno Browney.
No valve springs, fingers crossed they don’t float but will deal with it then if they do. Thanks very much mate 👍
Loving this series, I'm thinking around 250rwkw on the dyno
Thanks mate, hope you enjoy what coming as we near the end of this series 👍
With that beard He's slowly evolving into Clint from Pokeys Mechanical
Had to suss that for myself. Beard is getting close but the hair on top is never again going to match 🤣
Browney 224rwkw my guess hopefully makes a lot more !!!!👍🍻
I’d be more than happy with that, fingers crossed 👍
Good vid mate. Im tipping 240 rwkw. With 400 too come i hope.🤘🏼🤘🏼🤘🏼🤣
🤣 Not going to rule out pushing it further one day! Thanks mate 👍
love this series browney, hope it goes well on the dyno, I'm thinking a conservative 232 rwkw
Appreciate that a lot mate, good luck 👍
The clock is there on mine so I'm going with a turbosmart E boost street near the power outlet. That shows boost and that will do for me.
And you can kill two birds with one stone, gauge and boost control if you need. Is definitely a good option!
fantastic cars big barra fan, gona guess exactly 255kw to the rears @9psi
i got 307 kw m 870nm completely stock after tune at rear wheels, thats enough for me
Hi Browney, I reckon you'll hit around 245RWKW mark! Good luck. Cheers
Thanks legend, fingers crossed.
i believe in 294rkw, seems reasonable and if u want the most thats as good as ur gonna get i reckon
16:09 is where you have me completely lost :(
love the videos, im guessing 228rkw, good luck with the dyno
Thanks very much mate, good luck to you too 👍
Love the channel , I hope it gets at least 261kw haha!!
Don't think we'll manage that just yet but I can dream, one day!
I reckon its going to pin 266rwkw on the dyno
Motor will hold up there pretty strong I reckon around the 240kw
Thanks mate, I reckon she'll be just fine... for now! Good luck
Yes and 270kw
I reckon you'll get a high 190 to 210 rwkw. Maybe as high as 220, if you get good conditions. I will change my number when I rewatch the dyno run you did at Dandenong.
I'm thinking you're right in the money there somewhere Glen, have a crack mate 👍. Hopefully towards the higher end but it's a guess for me too still. Will be same tuners, Maxx over in Dandenong.
@@BrowneysGarage thanks Browney. I've watched the Dyno run again and I'm going to stick to those numbers. So I will go with a firm number of 213. Of course I'll be happy if it goes higher but on a percentages game I reckon it'll be this or close to. Good luck when you do the run and you are there to watch (or should that be cringe?) as it gets on the rollers.
Also thanks for posting this. I'm now going to fit those gauges to my N/A station wagon! Looking forward to the turbo noises I'll be making as I drive it!
@@glensgraphix Like you're thinking, happy either way.
It'll likely be a 'drop it to do when they get time' as they're so busy, but the guys will film it for me. Meanwhile I'll be pacing and nervous peeing every 30 mins or so I assume!
Could always hook up fake dose/BOV noises while you're there? 🤣
@@BrowneysGarage well it would confirm to my mates I'm a wanker. LET'S DO IT!
Looking awsome mate great video my guess on rwkws would be 220 rwkws only because pretty much stock but could be wrong ever way just having a guess more important loving the videos and ur doing awesome job im actually thinking about getting xr6turbo doner car for mine one day and straight swap all good bits
Thinking right around here myself, and I’d be good with that for now. Fingers crossed.
Donor car would have been ideal but even those are getting pricey!
@@BrowneysGarage yeah if was me personally if was more i turn it down abit to be on safe side till u open up that motor to hold more hp and biggest worry be that btr
I reckon it will make around 240rwkw for it to be safe
Hey browney great videos as always I'm guessing around 244kw
Thanks mate, good luck 👍
219kw I think will be where it sits hope it all goes well!
Thanks mate, me too! Should be right.
Love the build and really enjoy your videos. My guess is 235kw. 👍
Thanks very much mate, good luck 👍
Stock ba xr turbo has roughly 220rwkw (apparently) and as your car has all the stock turbo gear and na spaghetti rods I’m gonna guess around the 255rwkw mark
Believe they're dyno reads that 220rwkw or so for a stock turbo car but with a tune - not sure what boost that is though! Good luck mate 👍
Hi browney , I’m guessing 240rwkw at 9psi
I reckon it'll be 220rwkw
NA Engine will hold find. Saying that, I reckon tuner will play it safe-ish. 245kw
Short of a mistake by me, she'll be fine! 👍
Random news because I got nothing to say
I got my first car and it is a 2009 fg xr6 N/A
loving the journey, guessing around 255rwkw
Thanks mate, getting very exciting now. Good luck 👍
237 rwkw as a stab in the dark! Hope it holds up for you!
You and me both! 👍
226rwkw, hope it's more though and stays together🤞
She'll be right... I think.
Mate if you don't mind me asking, how many metres wide is your garage?
I'm thinking of building a new shed with plenty work room and yours looks big enough.
Of course not mate, it's 6m x 6m x not nearly tall enough.
The width for anything I've worked on so far has been pretty good even with a largish bench and storage.
Have run into, and sure I will more in future, issues with it not being deep enough. Enough to work on engine bay, remove front bumper etc but only when you don't want to work on anything behind the car too. And was out of room when doing the diff removal by itself so engine out or similar would be an issue, another meter or so would help a lot.
Go as big as you can I guess, and if you're lucky to go tall & big enough for a decent hoist even better, would be a game changer! Good luck
@@BrowneysGarage
Cheers thanks mate.
Yes a hoist would be sex with hydraulics 😁
Im gonna guess 225rwkw safe tune, Maxed out 249rwkw
1800whingers , AFR it is , its a free call
295kw, I have faith in you browny
I appreciate it mate, but have less faith! 🤣 It's still a very close to stock setup for now.
with 9psi i would say 268rwkw being a higher compresion than my turbo motor with similar mods and 12.9 psi gets 300.9 rwkw and has run as quick as 12.4 mid 13's for you i think. although AFR is a good thing what is more important is a oil pressure gauge as we dont want to wait till the idiot light lights up now do we Brownie ?
Oh yeah i forgot to give my comment 228 rwkw...john...Willaura😎
Good luck John 👍
Hey Browney,
I reckon you’ll get 216rwkw……..that’s my guess (I hope you get more)
Thanks mate. Me too but I’ll take whatever I get, sure it’ll be fun regardless 👍
@@BrowneysGarage can’t wait to see it mate, love your work
Geez Browney I was unfortunately close 😎I reckon you are itching for some more now mate, look forward to seeing the 1/4 mile time and more vids, keep up the good work ! 👍
Silly question, but what relay and connectors did you use for the wideband? What else did you use for it? I have the same wideband kit looking to install!
Easy 247kw good work
267rwkw for a safe reliable tune
320rwkw at 8psi
I think 323
Yes and I thick around 320kws
Love the optimism but there’s not a chance of that… yet
Hey browney, what music do you like listening to while your working on the car?
I listen to a heap of podcasts, better than the voices in my head! But I have been getting back to more music and listen to a huge and weird range of stuff, Rise Against, Hilltop Hoods, AFI, Incubus, Grinspoon, Iron Maiden, Gaslight Anthem, Highly Suspect, Five Finger Death Punch, Blink 182, Linkin Park, Avenged Sevenfold, Slipknot, Disturbed, on and on it goes. Hell even some old house music or stuff like Dido and Florence and the Machine get a run.
I reckon 248kw with what has been done and not wanting to push it too far.
Would be nice, not sure we'll get there yet but fingers crossed!
230 RWKW @ 10 psi
240rwkw well that’s what mine made haha
Nice, what boost?
262rwkw, but i guess its all up to your tuner and how far he wants to push it vs how long you want it to stay reliable. anything above 220rwkw with chu chu sounds is a bonus
Only so much they can push it without further boost control, so it’ll be closer to 220 and chu chu noises I think - I can live with that for now!
i reckon 260 rwk brother! hope it goes well
Thanks mate 👍
Hey mate I have the same car as yours,the stock airbox was taken out when I got it.i really need to find the intake hose that goes from the turbo to the air box.would you know where I can get that hose from? If u could let me know it would be appreciated mate
My guess is 224 rwkw
Edit: 245.7rwkw
I'll be replacing my clock with gauges even tho mines 5.4 na. Oil pressure and oil temp gauges. Where I live it regularly hits 48-49 degrees Celsius with roads literally melting so I'd like to keep an eye on oil pressure and temp.
Damn, I’d melt too! Can absolutely understand you wanted to go that way, hope the video helps at least a little 👍
Any problems with getting rego checks or blue slips etc or anything you might run into in the future?
270kw
323rwkw since you haven’t done valve springs and head bolts
😲 We may be a bit short of that due to lack of electronic boost control and basically factory parts too. I like the positivity though 👍
I think it’ll be 257rwkw
Wont taking the icc unit out (the head unit) immobilise the car
261 RWKW is my guess. What exhaust studs are you using?
Just a kit from Mamba - ebay.us/xdUNzs .
Hey Browne supercheap sell a double din dash facelift make a it look alot better
I would say 243rwkw
got a code from a BA wagon, VCT Overetarded. Sounds expensive, any ideas mate?
222 killer wasps
I see no car, only beard!
Better keep my fat head and beard away from the dyno rollers hey!? Thanks Sir BearCat 👍
@@BrowneysGarage protect it, protect it at all costs!
Another great video, cheers man.
230kw, give it some beans
Gladly, that right foot is getting itchy mate 👍
@@BrowneysGarage if my seXT made 227KW yours can make way more mate, drop them sets
XT or XR same same though, can’t see it making more and would be more than happy to make that power
I reckon 234rkw
im gonna guess 274 rwkw
I will guess high 270rwkw