Two years later this motor is going strong ruclips.net/user/postUgkxBZWgzfpS2Jj7JqIHyaSZjyVHNUgCKCBf Just uploaded a video of it after 2 years. We use it probably a dozen days each year on our small raft.-original review- We got this motor the other day and tested it out. I don't have anything to compare it to, but it seems good to me. It has all the features advertised - the motor housing is metal. We will see how it performs longer term and I will revise this review if needed. Some initial observations:- Good thrust, moves our boat around really well- It comes with a circuit breaker but no switch - so there's no way to kill the motor other than yanking the connection off the battery. I installed an inline switch.- The mount bracket is plastic and I worry it might break- There are a number of plastic parts that I worry about, but the most important ones are metal or some kind of composite
Good honest review. These asia made products will hold up if cared for properly. With two stroke engines that oil/fuel ratio needs to be just right. Id rather clean fouled plugs than re-ring a motor
Hi from Australia. We’re in lockdown atm and I also have a 52cc 2stroke outboard weedeater that I haven’t unboxed yet. Nice review, I was about to buy a larger heavier outboard but decided against it if I use a plastic Oldtown branded kayak.
Be careful with the handle swivel. Mine was made of cheap cast aluminum and shattered at the handle end of the swivel while using it. I modified the handle it gets my canoe flying across the lake to the point I'm doing wheelies. Make sure the lower unit has oil in it.
I have an 18' Coleman canot that had that problem of "porposing" up especially in a headwind. You should do what everyone does to make your canoe more stable on the water. Shift weight towards the bow to keep the bow from popping up because if wave or wind action! Same goes for boats that do not plane easily. Shifting weight forward balances your craft better, gains some speed, and becomes a safer craft!
Looking at the rear of the motor there are two screws on the right side of the lower unit. The oil comes in a plastic squeeze tube, motor must be upright when you fill it from the BOTTOM hole up.when full put top screw in first then remove tube. Don't relax pressure on squeeze tube or you suck the oil back out.
Anything will last longer with constant maintenance. The tie breaker for me is that centrifugal clutch in the leg. Across the board, everyone I have talked to about Chinese made outboards below 5hp is that centrifugal clutch wearing out every season (with steady use). Occasional use may let that clutch last two seasons, but usually less. The earlier outboards had a "Chinglish" owners manual that wasn't very understandable which caused many outboards to not last very long. I know that if I decide to buy one, it will be two cycle with forward, neutral, and reverse gears and above 6hp for longevity. These motors will last much longer when they are not strained too much. I once ran a 15hp Evinrude, and later twin 40hp Johnsons on my Alumacraft and I learned that the extra weight made for longer and more useful lives for those engines. Chinese made outboards are "extra" light, which means they sacrificed weight and longevity for "convenience".
Yeah.. I replaced the clutch as well on this one on a later video. Really just got it as an experiment since the price made more sense than constantly renting a trolling motor and battery from my local park for $48 for a 6 hour period.
i am so sad to hear this... i just bought 3.5HP this (product is on board, i am taiwanese my native language is chinese) and you said about clutch problem i guess its nomal condition cuz this engine only 3.5hp so driver usually full throttle working so clutch wear is very soon...even made in japan also have this problem (my chinlish hope anybody can understand lol
to make it quite just attach auto hose to muffler to it run it in down in water by front of propeller if you want it go faster than change pit on propeller im sure you feel it take little longer rev up
I thought about buying one to use in lakes that wont allow my 40hp and as a back up incase the big motor dies or quits..or in shallow water when you rather not take a chance messing up a big motor
Place this motor on m Bris 12.5 ft and worked great in saltwater. You have to get it to the highest speed 5 to get it moving when the tide is up. But on calmer waters 3-4 works good for some speed. Easy to use.
Just shairing. I have not tested it yet on the water. I just brought an 12.5 raft pontoon boat. I have an old trolling motor. Only has slow and fast. I put on an variable speed. Yet, my point. I bought 2 20ah AMG sealed Marine grade friendly batteries. Hooked them up my way. An 20 watt self contained panel. So far running test time out of an 5gal bucket. Endless. At night not at full speed. 40% power. The double battery hookup is simple. Two battery 12v hookup as normal. Then make an X with the wires. One negative on one battery and the positive on the other. Then opposite with the solar. Yet I am watching this on shopping for an small fuel boat motor. Small electric trolling motors. Just hookup an 20 watt solar panel. 50 watts medium. 100 watts large. Then use your trolling motor as long as you want to.
They're actually little deep they're actually decent motors but remember the prop that comes with the motor is a standard prop it's not a work prop it's not a speed prop but it is interchangeable so here is a good suggestion take it to your local marina and have them put a prop that matches that style motor got to give you a little bit more pitch and that'll up your speed and also save you on your gas consumption but the prop is interchangeable I do suggest that you do change the prop
Considering buying one of these now, how often do you use the motor and how well has I held up since you made this video? Thanks for your time, I found this very insightful!
Thank you! I'm actually in the middle of moving homes at the moment, so I have not gotten a chance to take it out in months, but I've used it a total of 8 times so far.
@@PatOutdoors I was going to ask the same question. I was also wondering about the noise? Take your time though; moving sucks. We're partway through that too. Everytime I say "never again!" But here we go... Again. 🙄
I was on the fence about getting one of these for my custom pedal boat, to replace the center mounted trolling motor...but my boat is definitely lighter than that flatboat so im on board now.
I use a 30 lb thrust electric motor on a 12ft Jon with a $50 refurbished 18 wheeler truck battery a it will last at least 5 hrs strong for at least 4 years and it pushes me and my buddy with gear
I'm looking for something like this for a backup motor in case there's a problem with my main 9.9hp Mercury. I'm removing the mast from a 1990 Macgregor 26 sailboat and planning on just motoring it. I feel more comfortable with some kind of backup even if it's slow on a boat this size. Price sounds good. My thoughts.
I really do want one. I was actually in the process of purchasing a 12' Starcraft aluminum V-hull months ago, but the titling process fell through registering in VA..
I have one of these, 52cc 2stroke chinese motors. I run it 32:1 on a 14ft v-hull aluminum. By myself (235lbs) with 12v battery and fishing gear, ive never broken 6mph. Wonder if its boat, or brand of motor causing such a large gao in top speeds
i think it is the other way around; V hulled boats are slower and much heavier on gas,and they are good only for the rough water,the sea; The V makes them more confortable, like a spring ,since they go up and down on the waves better; but what do i know,this is the internet for you.
@@josepeixoto3384 depends which one you are thinking of. There is a difference of weight between the 12 ft Gregor front v and an old 12 ft sears front v model which is a lot lighter. Having said that, two people can easily carry both to the water while a single person can drag/push either to the water. With equal wind conditions and equal weight between both types of boats, the v front, flat bottom aluminum will still cut the waves easier than a square front flat bottom aluminum making it faster due to less resistance force. In flat water both types perform well enough.
I have a 4-stroke engine (similar to the one in the video), attached to a small inflatable boat (2.3 x 1.3 meters). The maximum speed is 5 kmh (3.2 mph) and at average speed somewhere around 2.5-3 kmh. I think it's too slow. Are these the operating parameters or does my engine have a fault? Thank you!
Nice review, I know it's loud but is the noise level unbearable?? And can it go slow enough to troll lures or is it like an idle to wide open type thing, thanks
Ok it is quite loud and I would not recommend it for trolling lures. It's got a clutch so you would have to give it decent throttle to move forward and it is not great at being quiet. It sounds like a weedwacker honesty.
@@PatOutdoors I mean I'm not too awful worried about the sound, Im a fabricator so I can rilun a pipe from the exhaust to the water, and yea it does have a cintrifugal clutch, a lighter spring will make it grab sooner, I've also seen some ppl delete the clutch spring
I enjoy it it has some play in the cable throttle itself tried to adjust it but even wide open throttle it seems to run rough I just use it half way it seems to run better and smooth
Yes it does, not the most ideal for fishing. After a year, I've had to change out the clutch (wore out after 8 months), but other than that it's been fine
@@PatOutdoors thank you because I have an aluminum boat about maybe 15 or 16 ft and I just want to know because I have that same little motor and I want to know if they can push it in the ocean, you know it's a 4to5-person boat and thanks
Nothing like bolting a weed whacker to your transom. I was considering one of these as a kicker until I heard one run. For the money it’s great but I couldn’t deal with the pissed off hornet sound for long. Wearing ear pro while fishing is just a no. However, whatever gets you out on the water is a plus…
You make a very good point. I just have fun putting around in a jon boat with it. But when it comes to fishing.. it definitely does not help me because it's loud af lol
I did.. and the Seahawk3 definitely needs to be modified to take the weight and power. The standard Intex mount is too weak. I'm still working on the Seahawk platform and transom mount. I just got distracted with my kayak project recently.
A friend of mine ended up buying it from me when I was 80% finished with it (go busy with work at the time.) It was a bit small for me also.. But it's now complete, being saved for his son to grow into. I'm working on another MTB project soon, just collecting more parts.
Good morning from Washington state, I'm watching your videos my friend and subscribed your channel already and have a wonderful weekend and takecare, see you soon bye bye. 👋 👍👍
Yes it's a 14 ft rental Jon boat. Didn't realize they offer a 4HP one, otherwise I would have gone with that! Either way I'm satisfied with the results from this 52cc engine and glad I no longer have to rent those weak electric trolling motors.
I like your review. I have an old Ark. Traveler that has/had an 8hp evinrude, but it hasn't run in years, don't know if it will. Do you think one of these little motors would push my boat good enough to fish out of...I am not a speed freak so if it would push mine at 8 mph I would be happy.
Thanks! I don't think they would be the same quality as an Evinrude to be honest. It's simply just a good starter motor to put you around 7-8 MPH on a 12 ft jon boat. It's been good for a year so far, but I've had to check all the bolts periodically to make sure it's all still torqued to spec. One main downside with this motor is the sound. It's a small 2-stroke so it almost sounds like a weed-wacker and not very quiet.. So not great to use as a trolling motor for fishing.
Have been looking for a motor like this for my kayak thanks for the video how long did it last long term if you had it that long I would greatly appreciate the feedback
I haven't had it for too long, only 4 months so I'm not sure how long it would actually last. But I'm sure with proper maintenance, it could go a few years. I would say it's a bit heavy to use for a kayak, but I'm trying that myself also. Just got me a kayak recently!
Actually yes I did. But then I ended up NOT using the choke and it started right away. Never used the choke since and haven't had a problem starting it cold or hot. Also noticed the boat ran at 5MPH during the first 20-30 minutes of the day and it just kept getting a little faster as it broke in more.
@@PatOutdoors I got mine working I had to replace the spark plug. I haven’t had mine running for more than 30 minutes at a time because I only have it on a small farm pond. Did you have any trouble with water getting in the gear oil in the lower unit?
No I have not had any issues with the lower unit. I have only used this motor for one 4-hour day though. I will continue to monitor for any unusual wear as I use it more.
God bless whoever is making n selling these out boards so poor people ca also enjoy the water too, as I was really cheesed off with boats with treble 300HP or ever 6 outboard engines that cost more to run a day than a family spends for a week ops more Likely a month tie for poor working people to have mome pleasures too
I just watched one guy with triple outboards. 1.5 gallons a minute!!! So an hour ride would cost $300. Not counting the truck fuel. That's why I'm looking at the small engines and small boats.
Two years later this motor is going strong ruclips.net/user/postUgkxBZWgzfpS2Jj7JqIHyaSZjyVHNUgCKCBf Just uploaded a video of it after 2 years. We use it probably a dozen days each year on our small raft.-original review- We got this motor the other day and tested it out. I don't have anything to compare it to, but it seems good to me. It has all the features advertised - the motor housing is metal. We will see how it performs longer term and I will revise this review if needed. Some initial observations:- Good thrust, moves our boat around really well- It comes with a circuit breaker but no switch - so there's no way to kill the motor other than yanking the connection off the battery. I installed an inline switch.- The mount bracket is plastic and I worry it might break- There are a number of plastic parts that I worry about, but the most important ones are metal or some kind of composite
Those older Japanese outboards are the best Tanaka . Much quieter with underwater exhaust. I put hundreds of hours on one when I was a kid.
Good honest review. These asia made products will hold up if cared for properly. With two stroke engines that oil/fuel ratio needs to be just right. Id rather clean fouled plugs than re-ring a motor
Hi from Australia. We’re in lockdown atm and I also have a 52cc 2stroke outboard weedeater that I haven’t unboxed yet. Nice review, I was about to buy a larger heavier outboard but decided against it if I use a plastic Oldtown branded kayak.
you'll never be free unless you fight the lockdown so you can use your outboard
Be careful with the handle swivel. Mine was made of cheap cast aluminum and shattered at the handle end of the swivel while using it. I modified the handle it gets my canoe flying across the lake to the point I'm doing wheelies. Make sure the lower unit has oil in it.
lower unit ?? its a 2 stroke
I have an 18' Coleman canot that had that problem of "porposing" up especially in a headwind. You should do what everyone does to make your canoe more stable on the water. Shift weight towards the bow to keep the bow from popping up because if wave or wind action! Same goes for boats that do not plane easily. Shifting weight forward balances your craft better, gains some speed, and becomes a safer craft!
Did you check the lower unit for oil? Some of these little outboards come dry and you need to put oil in the lower unit.
Very good tip, I ended up using AMSOIL gear fluid for the bottom unit.
Hi, where do you fill the oil?
Looking at the rear of the motor there are two screws on the right side of the lower unit. The oil comes in a plastic squeeze tube, motor must be upright when you fill it from the BOTTOM hole up.when full put top screw in first then remove tube. Don't relax pressure on squeeze tube or you suck the oil back out.
....you have to use marine grade lower unit oil, there are you tube vids on doing this
That would work perfectly on our pelican pontoon boat. Good video boys. I'll have one of those before Schools out for the summer
Thanks for the review. I've looking for similar motor and this gives me an idea as I also have 12 ft aluminum boat.
Anything will last longer with constant maintenance. The tie breaker for me is that centrifugal clutch in the leg. Across the board, everyone I have talked to about Chinese made outboards below 5hp is that centrifugal clutch wearing out every season (with steady use). Occasional use may let that clutch last two seasons, but usually less. The earlier outboards had a "Chinglish" owners manual that wasn't very understandable which caused many outboards to not last very long. I know that if I decide to buy one, it will be two cycle with forward, neutral, and reverse gears and above 6hp for longevity. These motors will last much longer when they are not strained too much. I once ran a 15hp Evinrude, and later twin 40hp Johnsons on my Alumacraft and I learned that the extra weight made for longer and more useful lives for those engines. Chinese made outboards are "extra" light, which means they sacrificed weight and longevity for "convenience".
Yeah.. I replaced the clutch as well on this one on a later video. Really just got it as an experiment since the price made more sense than constantly renting a trolling motor and battery from my local park for $48 for a 6 hour period.
Do You know where can i Buy centrifugal cluch For me 52cc outboard motor
i am so sad to hear this... i just bought 3.5HP this (product is on board, i am taiwanese my native language is chinese)
and you said about clutch problem i guess its nomal condition cuz this engine only 3.5hp so driver usually full throttle working
so clutch wear is very soon...even made in japan also have this problem (my chinlish hope anybody can understand lol
hope you put gear oil in the lower end and changed out the spark plug and went easy on the speed for awhile to brake it in.....
Bet those kayakers and the campers appreciated the chainsaw decibel levels you brought along with you 😝
hahahah yeah that's probably the biggest downside. The fish arent a big fan either so I have to shut off and coast to the fishing spot
Fuck the campers they don't own the lake...if they didn't want noise they wouldn't allow motors on that lake at all
q
Because of your review, I am buying one.
to make it quite just attach auto hose to muffler to it run it in down in water by front of propeller if you want it go faster than change pit on propeller im sure you feel it take little longer rev up
Thanks for the review. I'm getting one for my pelican bass raider10.
does it come with a title? in Texas both boat and motor must be registered.
Pretty impressive. I would have put Tefgel on the threads of all those bolts in case I ever needed to disassemble.
Great speed from a 52 cc motor
! 👍
I thought about buying one to use in lakes that wont allow my 40hp and as a back up incase the big motor dies or quits..or in shallow water when you rather not take a chance messing up a big motor
Como haz sacado tanta velocidad de este motor? Yo tengo un motor Hangkai 4CV 4 Tiempos con 55CV y solo me coge unos 6Kmh
Place this motor on m Bris 12.5 ft and worked great in saltwater. You have to get it to the highest speed 5 to get it moving when the tide is up. But on calmer waters 3-4 works good for some speed. Easy to use.
How to you wash it after use?
Looks interesting but can't you keep the camera still??!!
Thinking about getting one of these for my portabote
How long did this motor last is it still ru ning ?
Can’t seem to find these in stock anywhere.
Just shairing. I have not tested it yet on the water. I just brought an 12.5 raft pontoon boat. I have an old trolling motor. Only has slow and fast. I put on an variable speed. Yet, my point. I bought 2 20ah AMG sealed Marine grade friendly batteries. Hooked them up my way. An 20 watt self contained panel. So far running test time out of an 5gal bucket. Endless. At night not at full speed. 40% power. The double battery hookup is simple. Two battery 12v hookup as normal. Then make an X with the wires. One negative on one battery and the positive on the other. Then opposite with the solar. Yet I am watching this on shopping for an small fuel boat motor. Small electric trolling motors. Just hookup an 20 watt solar panel. 50 watts medium. 100 watts large. Then use your trolling motor as long as you want to.
It would be absolutely hilarious to see a jon boat with 2 of these 😂 just because.
I’m gonna have to get me one of these for my Bonafide SS127 kayak
They're actually little deep they're actually decent motors but remember the prop that comes with the motor is a standard prop it's not a work prop it's not a speed prop but it is interchangeable so here is a good suggestion take it to your local marina and have them put a prop that matches that style motor got to give you a little bit more pitch and that'll up your speed and also save you on your gas consumption but the prop is interchangeable I do suggest that you do change the prop
Thank you for this tip. May give this a try!
Seems not available. Where can i find ? Thanks
Is it reliable does it start every time
Considering buying one of these now, how often do you use the motor and how well has I held up since you made this video? Thanks for your time, I found this very insightful!
Thank you! I'm actually in the middle of moving homes at the moment, so I have not gotten a chance to take it out in months, but I've used it a total of 8 times so far.
@@PatOutdoors I was going to ask the same question. I was also wondering about the noise?
Take your time though; moving sucks. We're partway through that too. Everytime I say "never again!" But here we go... Again. 🙄
I was on the fence about getting one of these for my custom pedal boat, to replace the center mounted trolling motor...but my boat is definitely lighter than that flatboat so im on board now.
I just built one using weedwaker parts and a 31cc Honda 4 stroke.
Awesome! Do you happen to have a video of this?
Hellon,what kind of tiller extension can it take?
I use a 30 lb thrust electric motor on a 12ft Jon with a $50 refurbished 18 wheeler truck battery a it will last at least 5 hrs strong for at least 4 years and it pushes me and my buddy with gear
How heavy is the 18-wheeler truck battery? I've considered this option, but normal size 25-35 lb battery's have only lasted about 1-2 hours for me.
@@PatOutdoors the battery is pretty heavy and it usually last about 5 hours
I'm looking for something like this for a backup motor in case there's a problem with my main 9.9hp Mercury. I'm removing the mast from a 1990 Macgregor 26 sailboat and planning on just motoring it. I feel more comfortable with some kind of backup even if it's slow on a boat this size. Price sounds good. My thoughts.
Does it come with a spring
Do u have to re fill it with oil and gas again after it ran out of gas an hour later? please help never owned a gas motor
Adding oil to the gas mixture only applies to 2-Stroke engines. Regular 4-Stroke gas motors don't need oil mixed in the fuel.
@@PatOutdoors do u got to add oil each time you refuel ? Or only at the beginning?
@@PocketBeast1243r
every-time you refuel
Where do you buy these in the USA?… be great to get them in Australia!
Please tell me if this motor is good for a mini boat 8ft i need ono for my boat
You should get some speed increase with a v hull since square jon boats have more resistance cutting through the water.
I really do want one. I was actually in the process of purchasing a 12' Starcraft aluminum V-hull months ago, but the titling process fell through registering in VA..
I have one of these, 52cc 2stroke chinese motors. I run it 32:1 on a 14ft v-hull aluminum. By myself (235lbs) with 12v battery and fishing gear, ive never broken 6mph. Wonder if its boat, or brand of motor causing such a large gao in top speeds
i think it is the other way around;
V hulled boats are slower and much heavier on gas,and they are good only for the rough water,the sea;
The V makes them more confortable, like a spring ,since they go up and down on the waves better;
but what do i know,this is the internet for you.
@@josepeixoto3384 depends which one you are thinking of. There is a difference of weight between the 12 ft Gregor front v and an old 12 ft sears front v model which is a lot lighter. Having said that, two people can easily carry both to the water while a single person can drag/push either to the water. With equal wind conditions and equal weight between both types of boats, the v front, flat bottom aluminum will still cut the waves easier than a square front flat bottom aluminum making it faster due to less resistance force. In flat water both types perform well enough.
I have a 4-stroke engine (similar to the one in the video), attached to a small inflatable boat (2.3 x 1.3 meters). The maximum speed is 5 kmh (3.2 mph) and at average speed somewhere around 2.5-3 kmh. I think it's too slow. Are these the operating parameters or does my engine have a fault? Thank you!
Nice review, I know it's loud but is the noise level unbearable?? And can it go slow enough to troll lures or is it like an idle to wide open type thing, thanks
Ok it is quite loud and I would not recommend it for trolling lures. It's got a clutch so you would have to give it decent throttle to move forward and it is not great at being quiet. It sounds like a weedwacker honesty.
@@PatOutdoors I mean I'm not too awful worried about the sound, Im a fabricator so I can rilun a pipe from the exhaust to the water, and yea it does have a cintrifugal clutch, a lighter spring will make it grab sooner, I've also seen some ppl delete the clutch spring
I enjoy it it has some play in the cable throttle itself tried to adjust it but even wide open throttle it seems to run rough I just use it half way it seems to run better and smooth
Does it scare fish that loud? And any problems after a year?
Yes it does, not the most ideal for fishing. After a year, I've had to change out the clutch (wore out after 8 months), but other than that it's been fine
How is it going now is it still working?
Still running! But I had to change to clutch a few months back
I just got the same one but it didn’t come with a spark plug … did your or do you know the size of plug it takes.
That’s strange. I have a maintenance video in this playlist that shares the spark plug specs. I used ngk
Great videos. Is this a 52 cc outboard yes. ?
Yes it is! Thanks
Would u recommend it and also for how long would u use it and would it ever over heat
I can't find this model anywhere for sale. It's 2023 and I want one dam it. Help!?
Here you go: amzn.to/40DMDrF
Links didn't work brother, anyway you have a working link?
Hi. links do not work (out of stock) do you know an analogue? We met at Lake Burke. Thank you.
Did it come with 3 dollar earmuffs
I wish they did!😂
Gonna have to upgrade my 1.5hp one for my kayak!!
has probado el excursion bote en el mar... podria usarse
Where did you get the motor for. I am considering getting one
Did the motor come with a certificate or serial number ? Just curious texas requires us to register the motor.. i like this motor you got.
the 12mph is a GPS anomaly. it did a steady 8.
Does a loud engine like that scare fish lol
Hey bro how long was your boat and how wide was I have that same engine
12 foot by 36”
@@PatOutdoors thank you because I have an aluminum boat about maybe 15 or 16 ft and I just want to know because I have that same little motor and I want to know if they can push it in the ocean, you know it's a 4to5-person boat and thanks
@@terryjoe323la I would recommend a larger motor for a boat that size
@@PatOutdoors ok oright for show
I just ordered one for my inflatable boat marier 4
How fast were you able to go, I’m planning on getting for my Mariner 3
@@iflipper1000 I haven’t used it yet still😂
I was impressed ! Great review !
Glad you enjoyed it!
Spring come with it? Or do i gotta take it out of a pen
That spring came with it in a small bag
Nothing like bolting a weed whacker to your transom. I was considering one of these as a kicker until I heard one run. For the money it’s great but I couldn’t deal with the pissed off hornet sound for long. Wearing ear pro while fishing is just a no. However, whatever gets you out on the water is a plus…
You make a very good point. I just have fun putting around in a jon boat with it. But when it comes to fishing.. it definitely does not help me because it's loud af lol
How much Indian rupees price
Need ear plugs if you’re gonna be at the throttle very long. Anybody know a way to quiet those down a little?
LOL! I totally agree, one major downside to this thing. Been over a year and I haven't found a solution yet!
Can you do a review of the hangkai 6hp 2 stroke outboard on Amazon?
Can you send me a link of the exact outboard you are looking at? Maybe I can in the near future.
did you try it on your seahawk 3
I did.. and the Seahawk3 definitely needs to be modified to take the weight and power. The standard Intex mount is too weak. I'm still working on the Seahawk platform and transom mount. I just got distracted with my kayak project recently.
I call sea tow and have them tow me because I don't want to use my gas it is too expensive . Best $100 membership I spent.
What happen to the diamondback
A friend of mine ended up buying it from me when I was 80% finished with it (go busy with work at the time.) It was a bit small for me also.. But it's now complete, being saved for his son to grow into. I'm working on another MTB project soon, just collecting more parts.
I thought you quit RUclips thank god you came back
Thats 9mph yep i can tell. Hopefully its not too loud.
NGL.. Its very loud 😂
Good morning from Washington state, I'm watching your videos my friend and subscribed your channel already and have a wonderful weekend and takecare, see you soon bye bye. 👋 👍👍
Thanks for subbing!
Is there no reverse?
For this price range, unfortunately no gas-powered outboards would have a reverse. An electric trolling motor would though, but it's much slower.
Is that a 14 ft john boat?
Just bought a 14 ft sears v hull and thinking about this one or the 4hp 2 stroke one they offer also
Yes it's a 14 ft rental Jon boat. Didn't realize they offer a 4HP one, otherwise I would have gone with that! Either way I'm satisfied with the results from this 52cc engine and glad I no longer have to rent those weak electric trolling motors.
Hey I just bought one from a guy on market place it's worth it I like it just use 50:1
I like your review. I have an old Ark. Traveler that has/had an 8hp evinrude, but it hasn't run in years, don't know if it will. Do you think one of these little motors would push my boat good enough to fish out of...I am not a speed freak so if it would push mine at 8 mph I would be happy.
Thanks! I don't think they would be the same quality as an Evinrude to be honest. It's simply just a good starter motor to put you around 7-8 MPH on a 12 ft jon boat. It's been good for a year so far, but I've had to check all the bolts periodically to make sure it's all still torqued to spec. One main downside with this motor is the sound. It's a small 2-stroke so it almost sounds like a weed-wacker and not very quiet.. So not great to use as a trolling motor for fishing.
Where did you get that motor I want to buy it
Hey bro nice lake... where is that..??
It's Fountainhead Park in Northern VA
2,6 hp??
Excellent - Thanks
Have been looking for a motor like this for my kayak thanks for the video how long did it last long term if you had it that long I would greatly appreciate the feedback
I haven't had it for too long, only 4 months so I'm not sure how long it would actually last. But I'm sure with proper maintenance, it could go a few years. I would say it's a bit heavy to use for a kayak, but I'm trying that myself also. Just got me a kayak recently!
Hi did you try this motor on your kayak yet?
Did you follow the low rpms, variable throttle setting 10 hour break in period ?
Keep an eye on the clutch. It slipps almost every time on these
Do you suggest I replace it periodically?
@@PatrickKasilag i removed the spring in mine. Clutch coating was gone after first two rides.
Its a carburetor not a throttle body. Throttle bodys are for fuel injection
Suara itu nyaring dan saat hujan kita akan mendayung
I have the same it works amazing
Thinking of getting one but I wonder if it overheats often because it’s air cooled?
Did you have problems starting it the first time?
Actually yes I did. But then I ended up NOT using the choke and it started right away. Never used the choke since and haven't had a problem starting it cold or hot. Also noticed the boat ran at 5MPH during the first 20-30 minutes of the day and it just kept getting a little faster as it broke in more.
@@PatOutdoors I got mine working I had to replace the spark plug. I haven’t had mine running for more than 30 minutes at a time because I only have it on a small farm pond. Did you have any trouble with water getting in the gear oil in the lower unit?
No I have not had any issues with the lower unit. I have only used this motor for one 4-hour day though. I will continue to monitor for any unusual wear as I use it more.
Wow did you say 9 mph with 2 people in 12 ft jon
If Thats right then that is actually pretty impressive
Way better than that trolling motor I reckon, cheaper too
looks like a high quality and low maintenance outboard
Where did you buy the motor at?
You can find these onboard motors here:
ebay.us/3RONtT
amzn.to/3xDPWBC
Ayos na Kuya
Why didn’t you consider a 4 stroke engine
I am considering one still. Looking at a Tohatsu at the moment. I just wanted to see what $230 outboard from eBay could do lol.
Updates?
Sorry I haven't been able to take it out lately. Looking forward to doing so in a few days!
These are $100 on temu now
Including shipping? That's insane
Good, but I'll have two in case one fail....
Lol, might not be a bad idea. Can't have too high expectations for this price.
I use a light Mariner 2.5 hp for decade .
Never have any problem . Those engine look slow .
God bless whoever is making n selling these out boards so poor people ca also enjoy the water too, as I was really cheesed off with boats with treble 300HP or ever 6 outboard engines that cost more to run a day than a family spends for a week ops more Likely a month tie for poor working people to have mome pleasures too
Ebay
I just watched one guy with triple outboards. 1.5 gallons a minute!!! So an hour ride would cost $300. Not counting the truck fuel. That's why I'm looking at the small engines and small boats.
@@WayneThePreacher How right you are mate GL
10 MPH =16KMH. 12 MILES AND HOUR IS 19.2 KILOMETERS AND HOUR, so the boat speed claim was accurate
Surprisingly, it was accurate. I just had low hopes at first
@@PatOutdoors MPH and kmh can be confusing sometimes lol . It happens
Bs
Your links under the vid are no longer good. Just tried them. Take care, spring is here!
Great motor if you want to suffer from tinnitus as soon as possible!... 😉
Hahaha this is very true though.. One of the main reasons I want to get a 4-stroke soon
Not bad for the money!
If they send you one that works?
None of your links are for your motor.