By far the best, most detailed installation vid I've seen. I also appreciated the detail included in getting the lights/wire harness removed from the factory plastic bumper!
I installed the same bumper on my JL Wrangler Rubicon; no complaints and I love it! ARB products may cost a bit more, but they are much better quality than the average aftermarket offerings. 😎
I love that bumper, but I have to say I don’t watch your videos a whole lot just because I feel like I’m competing with the music on what I can hear, it’s really annoying you guys should really just consider not having background music especially music that is more upbeat than what you’re talking
I completely agree. Great video. Great instructions. But the repetitive music over and over is too much. If I wanted to see a music video, I would watch Mtv.
Man, that looks sturdy - but HEAVY as heck! I wonder if we Jeepers really need 2-ton, mega-bumpers on our vehicles or if we just like the way they look?
Shipping weight is listed as 160lbs. Is that accurate for the weight of the bumper? Or is it closer to other steel bumpers on the market? (Around 100-110)
Movaje? Really nice - well-explained video BUT - please, please, please, turn off the horrible wisteling music that repeats a five second interval hundreds of times. Very distracting, OK - I got that out of my system. Do you know if this kit will fit Gladiator Mojave?
Have you see adaptor plates for the Mopar 3 point LED fog lights? I am having issues finding anything that will will fit from my 2020 JT Sport S. Also it seems the fender flares sit too low on the Sport and Sahara models as it causes them to flex upwards.
This thing weighs 200 lbs +50 lbs for the winch=250 lbs. Really interesting how often sellers "forget" to share this vital piece of information with inexperienced customers. What it really means is to install it you will need to modify the factory front suspension that will sag 3-5 inches under all the extra weight. Factory plastic bumper is roughly 35 lbs . There are some very good alternatives to ARB that are full steel , full width, and way better engineered to weigh less. Mine is 75 lbs, full steel. Looks exactly the same.
@@kmichaelp4508 I have a two door 2023 Willys. I installed 331201T GoRhino one piece full width stainless steel bumper, winch capable. Not sure why they say it's 89 lbs - I weighed it with all the pods and light bar installed - 75 lbs. Two weeks ago hit a racoon at 50 MPH - no damage to bumper. I really like the additional protection for the pod lights and light bar. It sucks that I had to buy the skid plate separately - another 250$. The price adds up to 1000 + with shipping, similar to the ARB, but it's way way lighter and I really don't know why you need all the extra weight in ARB - probably for some extreme rock crawling.
Do you know if this bumper can be installed on a Australian spec right hand drive JLU Rubicon?? Looking to have one shipped over as its not available in Aus unfortunately. Nicest looking full width bumper on thr market imo
What are your thoughts on the weight of the whole bumper? I’m debating between this one or the addictive desert designs full width. And that one is 50 pounds less. Primarily daily vehicle and overlanding
By far the best, most detailed installation vid I've seen. I also appreciated the detail included in getting the lights/wire harness removed from the factory plastic bumper!
Hands down the best looking full width on the market..kudos to ARB
The bumper looks HUGE in video and pictures. How are you liking it in person? Does it seem huge in person?
I just picked this bumper up and I'm gonna love it. But I wish they powder coated that bash plate. Should I go through the trouble to do that?
I installed the same bumper on my JL Wrangler Rubicon; no complaints and I love it! ARB products may cost a bit more, but they are much better quality than the average aftermarket offerings. 😎
looks great! think i want the same
Can I fit that on a JKU???
I love that bumper, but I have to say I don’t watch your videos a whole lot just because I feel like I’m competing with the music on what I can hear, it’s really annoying you guys should really just consider not having background music especially music that is more upbeat than what you’re talking
Amen to that - I muted the sound which is a shame
I completely agree. Great video. Great instructions. But the repetitive music over and over is too much. If I wanted to see a music video, I would watch Mtv.
Looks awesome! Nice new bumper.
Does this bumper completely block the front trail camera view?
Beautiful bumper
Does the bull bar block a front trail cam?
Great Vid ....how heavy is the bumper ?.....must be a beast \-/
Can this bumper can accommodate 37 or 38s?
Nice job, how is the clearance between the bumper/winch and the grill, can you remove the grill easily ?
you will have to remove the bumper to get the grill out.
Where did you buy the winch? Please thank you.
Man, that looks sturdy - but HEAVY as heck! I wonder if we Jeepers really need 2-ton, mega-bumpers on our vehicles or if we just like the way they look?
Its an extra 100 lbs.
The bumper looks amazing and I want one so bad but I wonder, what about front parking sensors?
Shipping weight is listed as 160lbs. Is that accurate for the weight of the bumper? Or is it closer to other steel bumpers on the market? (Around 100-110)
great video -which WARN winch is this? I thought you said DR12S but I can't find that one...Thanks!
How much weight are you adding with this install?
Hey bro where did you get that winch plate
I want to install this on my 2021 Jeep Wrangler JL 80th Anniversary edition. Is it plug and play like the install or do i have to cut anything?
Movaje? Really nice - well-explained video BUT - please, please, please, turn off the horrible wisteling music that repeats a five second interval hundreds of times. Very distracting, OK - I got that out of my system. Do you know if this kit will fit Gladiator Mojave?
How much does it weigh. Really interested but might be too heavy for my two-door.
That's a nice looking bumper👍
Great info and shows. Your time and efforts are appreciated.
Michael Herrell
Can the tow hooks be removed/installed with the bumper on the Jeep?
Have you see adaptor plates for the Mopar 3 point LED fog lights? I am having issues finding anything that will will fit from my 2020 JT Sport S. Also it seems the fender flares sit too low on the Sport and Sahara models as it causes them to flex upwards.
This thing weighs 200 lbs +50 lbs for the winch=250 lbs. Really interesting how often sellers "forget" to share this vital piece of information with inexperienced customers. What it really means is to install it you will need to modify the factory front suspension that will sag 3-5 inches under all the extra weight. Factory plastic bumper is roughly 35 lbs . There are some very good alternatives to ARB that are full steel , full width, and way better engineered to weigh less. Mine is 75 lbs, full steel. Looks exactly the same.
I would like to know what you have? I’m interested.
@@kmichaelp4508 I have a two door 2023 Willys. I installed 331201T GoRhino one piece full width stainless steel bumper, winch capable. Not sure why they say it's 89 lbs - I weighed it with all the pods and light bar installed - 75 lbs. Two weeks ago hit a racoon at 50 MPH - no damage to bumper. I really like the additional protection for the pod lights and light bar. It sucks that I had to buy the skid plate separately - another 250$. The price adds up to 1000 + with shipping, similar to the ARB, but it's way way lighter and I really don't know why you need all the extra weight in ARB - probably for some extreme rock crawling.
How much does the bumper weigh?
So you have your tow hooks mounted With a single tiny bolt? Are you just pulling this thing off immediately and sending it back?
How much does it weigh
Are you running 37"s with this bumper?
Do you know if this bumper can be installed on a Australian spec right hand drive JLU Rubicon?? Looking to have one shipped over as its not available in Aus unfortunately. Nicest looking full width bumper on thr market imo
What are your thoughts on the weight of the whole bumper? I’m debating between this one or the addictive desert designs full width. And that one is 50 pounds less. Primarily daily vehicle and overlanding
Dang, this one isn't even listed on the website anymore.
So I assume that wouldn't work with the Sport or Overland models since the fenders are lower compared to the Rubicons?
Correct 👍🏼
Does it will this work with a stock Gladiator MOJAVE?
I have it mounted on mine underneath the fender just a touch. Check the quadratec website for pics of it
I have a sport and it fits with mine, no modifications needed
Awesome reviews
This guy looks familiar 😏
Clicked to see how much... OUCH! More expensive than the last project Jeep I bought.
Intense music drowns the message🤔
Getting famous off of comments day 173, so I can live the dream, live life to the fullest🤙🤙🚀
Holy cow it’s $1100
Hello,I am the manufancture of LED headlights and like your video. Would you be willing to test them? Please reply to me if interest.
cage nut
Great video but the music is torturing. I’m trying to listen to you and it’s just lol it’s like a bad repetitive hold music.
👍👍👍👍
Nice but $1100.00 out of my price range
...and now a few years later it's $1,381.00. INFLATION!
Please stop saying Bondi! It’s pronounced BONDI!!
hahahaha