Did not expect this to work at all, but gave it a go because there are so many comments saying it worked. AND IT WORKED! I cut a little square from an antibacterial hand wipe & stapled to a bit of card. This has saved me so much time, energy, money, and may have saved a project I'm working on to a deadline. Thanks so much!
There is no way i thought that this would work for me. I used the alcohol swab stapeled to a piece of card and it worked! You are the best! Thank you so much!
You are amazing! I was gonna throw my XP-4105 away, the paper just won't feed. Used your card trick and it worked! I tried both wet wipes and alcohol swap. The latter does work better. Thanks a million.
Worked like a charm! My Epson was feeding paper a little crooked for years and recently the feed became nearly worthless. I tried the business car trick and my printer acts like new with absolutely no cost to me. Thanks so much!
I am so impressed. My paper has been slipping for ages until it eventually wouldn't load at all, even with a little push the help the paper it just went straight though without printing. Today I watched your video. Luckily I had some of the alcohol you mentioned. I cleaned the roller as you suggested, waited two minutes and then went to print. As I said I'm so impressed, it worked straight away. Thank you so much.
Great. I was really getting frustrated with my Stylus R380 printer that suddenly started failing to feed paper. I wasted over 2 hours trying to find what broke before I turned to the internet. This simple task put me back in the pink. All is well now. Thanks.
My Epson Stylus Photo R200 decided it didn't want to feed 290gsm photo paper anymore after many years of reliable service. I tried stapling an Isopropyl pad to a piece of card as suggested here, let it dry and it now feeds perfectly. Thanks a lot for this tip.
Our L3110 was doing this for months and I was so lazy searching for a solution until now. So the roller is the culprit. Got a cloth and alcohol, cleaned it and now it's fixed. Thanks!
Had to come back and say a huge thank you. I had used Platenclene on everything I could get to and obviously the feed roller is hidden. Your trick really worked. I am over the moon. I will share your video on my RUclips channel to my fellow ecotank friends
I am so grateful to you, i thought my printer had a major problem...even when i was trying to "help" the paper feed in it would hardly work and now i cleaned it and it has worked a treat , first time, you are amazing ... I am selling my art prints and was having a night mare trying to get them to print.
I can't believe it! These solutions worked on my R300. Out of the blue, the paper feeder roller stopped grasping my paper correctly. I used the alcohol wipe paper-clipped to a business card suggestion and voila!!!! Problem solved. :) Thank you.
Although I have an epson L455, this helped me. There was a bread bag tie ( plastic coated ) wire which was slightly beyond the field of vision, however looking obliquely and carefully helped in spotting it.
Thanks man it helped, I used alcohol pads for oculars and stick them to hard A4. You just saved me like 50 USD for repairs! thank you. More I may repeat it :)
just wanted to say thanks. Seems so obvious to check the feeder area, but my paper was intermittently not feeding properly - i took a look down the slot and found a NERF DART !! ... what a surprise!
Thank you so much! I was going insane! Turned out it was a black hairband, that was virtually impossible to see without a torch, wedged right at the bottom lol
That's great! Yes, sometimes it doesn't seem like it is dirty, but needs to get refreshed once in a while. Not too often, but does. Thanks for sharing!
Thank you! After losing my mind for an hour, I watched your video and was able to get my glossy paper to start loading again. I am now alcohol patch believer! It works, people!
Thanks, sorted paper misfeed issues on an Epson R3000. Moral of the story is take the paper out of the hopper and close the cover when not in use to stop dust getting inside.
ohhh... i like that idea of the wipe attached to the business card... going to give it a try... i have an epson-410 that just started failing to pull in the paper... thanks
Thank you so much! My thicker cardstock paper stopped feeding correctly for months, so I would have to gently push each paper in to print. I used your method on my Epson ET-2750 and my cardstock feeds again!!!! THANK YOU!!!!
Sat here for an hour. Watch this, 30 seconds later the solution. There's SOMEHOW a fucking plastic plug cover in the paper feed 🤦🏻♀️ you're a genius, but more than that, I'm an idiot. Thank you
I didn’t have an alcohol pad, so I cut and folded a square of a coffee filter (no shedding) and wet with alcohol. Worked like a dream! Today you saved my printer from certain destruction! Thank you.
It's the exact same method on an Epson Stylus Pro 3800 and 3880 too. Basically the same feed mechanism and the same part that needs cleaning every now and again. It is especially noticeable when you print on glossy paper where more traction is needed.
Thank you so much for the feedback and for your contribution! Very much appreciated! Thank you, thank you, thank you! You are very kind! I am happy that this video helped to get your printer back to work. Have a beautiful day!
If you have an Epson R285 or R2/R3 series printer and the paper is not feeding through or coming out wonky there is a plastic white roller, in between where the paper goes, manually rotate it gently to the opposite side and hey presto the paper feed issue will have been resolved.
im gonna try this. i have an ET 4700 and omg a popsicle stick fell off my wall into my printer feed and omg its not picking up! I hope this works!!!! I need this printer ugh its sold out not even like i can just buy another or i would!
Absolutely! Go for it. I know how frustrating it is to see the printer shortage we have today. Never thought I'd see that in my lifetime. I wish you the best!
Found a spring when I took my r380 apart to see why it wasn't working. Is there a spring in the back of the part that the paper rests on? This is a very large spring and I didn't think it came out of the printer.
I cleaned the paper feed and noticed the rubber part was quite worn like an old belt. I put some hair oil to moisturize it, wiped it down. It worked. 😂
I have a 7-year-old dance contest in my kitchen and am trying to figure out why my new Epson ET 2803 top feed printer is bending the lower left corner of every page. It's set to manual double sided printing. I checked for anything in the way, took paper out restacked and put it back, blew it out (because you never know) and still each corner is seriously bent. If this is in the video, I'm sorry I missed it but the Beach Boys and a 7-year-old are ... hilarious, I mean distracting!
Hello, mew in your channel, i have a question,....i purchased an Epson Ecotank et 15000, a few weeks ago,...I purchase it solaly cause they advertised it that it could print 13×19 paper size, turns out a lie, it can only do 11×17,....but also, the lady i consulted with while doing my research for it, said I vould use "cardstock" on the paper tray,....turns out, that was a lie too. Now I get a "gost paper jam message". Here is the thing, I was willing to pay over $700 for a few more inches 13×19. But now, if i wanted to only print 11×17 i could of payed much less for something like that. So, how can i fix this false "paper jam message"...or.....or,....is there a way to print in the full 13×19 size, ofcourse there will be borders but at least to be able to print a little bigger?.....and on not to heavy cardstock??? Thank you ahead of time.🙏
OH MY GOSH!!! I was about to launch it off the balcony but now I am back in business!! THANK YOU!!!
Hahaaa. Thanks for sharing. I'm glad you got it fixed. Have a great weekend!
Did not expect this to work at all, but gave it a go because there are so many comments saying it worked. AND IT WORKED! I cut a little square from an antibacterial hand wipe & stapled to a bit of card. This has saved me so much time, energy, money, and may have saved a project I'm working on to a deadline. Thanks so much!
I really appreciate your feedback. Glad it worked for you as well. Have a great weekend!
There is no way i thought that this would work for me. I used the alcohol swab stapeled to a piece of card and it worked! You are the best! Thank you so much!
I'm glad it did work!!! Thanks for sharing. Have a great day!
You are amazing! I was gonna throw my XP-4105 away, the paper just won't feed. Used your card trick and it worked! I tried both wet wipes and alcohol swap. The latter does work better. Thanks a million.
You're welcome! I'm glad you fixed your printer! Have a great day!
Worked like a charm! My Epson was feeding paper a little crooked for years and recently the feed became nearly worthless. I tried the business car trick and my printer acts like new with absolutely no cost to me. Thanks so much!
Glad it helped! Thanks for sharing. Have a great day!
I am so impressed. My paper has been slipping for ages until it eventually wouldn't load at all, even with a little push the help the paper it just went straight though without printing. Today I watched your video. Luckily I had some of the alcohol you mentioned. I cleaned the roller as you suggested, waited two minutes and then went to print. As I said I'm so impressed, it worked straight away. Thank you so much.
Great. I was really getting frustrated with my Stylus R380 printer that suddenly started failing to feed paper. I wasted over 2 hours trying to find what broke before I turned to the internet. This simple task put me back in the pink. All is well now. Thanks.
You're welcome! I appreciate your feedback. Have a great weekend!
My Epson Stylus Photo R200 decided it didn't want to feed 290gsm photo paper anymore after many years of reliable service. I tried stapling an Isopropyl pad to a piece of card as suggested here, let it dry and it now feeds perfectly. Thanks a lot for this tip.
That's great! Thank you very much for sharing! Have a great day!
Our L3110 was doing this for months and I was so lazy searching for a solution until now. So the roller is the culprit. Got a cloth and alcohol, cleaned it and now it's fixed. Thanks!
Simple ways in which I have become my own technician through amazing people like you doing this video. THANK YOU SO MUCH 🙏
You're welcome! I'm glad you can learn and share your knowledge as well. Have a great day!
You just saved me buying a new printer. Five minutes and it was fixed. Thank you!
Glad to hear it. Have a great day!
Finally something working! Paper loaded but blocked half way. Alcohol wipe on the roller and my Epson XP 445 is working again. Thank you 🙏
You're welcome! Thank you very much for sharing!
I didn't have an alcohol swab at the moment. I just wetted the end of my paper... This worked unbelievably 👏
Had to come back and say a huge thank you. I had used Platenclene on everything I could get to and obviously the feed roller is hidden. Your trick really worked. I am over the moon. I will share your video on my RUclips channel to my fellow ecotank friends
I am so grateful to you, i thought my printer had a major problem...even when i was trying to "help" the paper feed in it would hardly work and now i cleaned it and it has worked a treat , first time, you are amazing ... I am selling my art prints and was having a night mare trying to get them to print.
I'm glad you got your printer tuned. Thank you for sharing. Have a great day and a joyous Holiday Season!!!!
Epson R2400 wouldn't feed any paper. Cleaning the rollers with alcohol wipes fixed it! Many thanks!
I can't believe it! These solutions worked on my R300. Out of the blue, the paper feeder roller stopped grasping my paper correctly. I used the alcohol wipe paper-clipped to a business card suggestion and voila!!!! Problem solved. :) Thank you.
Thanks for the feedback! Glad it worked for your printer. Have a great day!
Although I have an epson L455, this helped me. There was a bread bag tie ( plastic coated ) wire which was slightly beyond the field of vision, however looking obliquely and carefully helped in spotting it.
I'm glad you found and fixed the problem. Thank you for sharing. Have a great weekend!
I`m blown away!!! It works! Thank you so much!!!!
I'm glad it worked! Thanks for the feedback. Have a great day!
Thanks man it helped, I used alcohol pads for oculars and stick them to hard A4. You just saved me like 50 USD for repairs! thank you. More I may repeat it :)
I'm glad you got it fixed. Thanks for sharing. Have a great day!
just wanted to say thanks. Seems so obvious to check the feeder area, but my paper was intermittently not feeding properly - i took a look down the slot and found a NERF DART !! ... what a surprise!
Thank you so much, this trick worked for my printer and saved me the expense of a repair.
Glad it helped! Have a great day!
Mine is a p800 and want to say thank you for the info I see what you did and now my printer takes the paper!
That's great! Thank you very much for your comment. Have a great day!!!
The rubbing alchohol worked!!! Thank you so much.
Awesome! Have a great day!
I had to push pages inside for a long time and now my L3160 works like new. Used wet wipe and cardboard. Thank you!
Thanks for sharing your experience. I'm glad you resolved the issue. Have a great weekend!
Thanks a million. I had left my printer for over 6 months. My printer is back on the road.
Worked for my XP-430. Thank you
Thank you so much! I was going insane! Turned out it was a black hairband, that was virtually impossible to see without a torch, wedged right at the bottom lol
You're welcome! I'm glad you got it fixed. Thanks for the feedback. Have a great day!
@@303electronics hu
It worked ! Didn't look dirty but tried alcohol glasses wipe, 3 attempts, and ta da paper pick up and print. Thanks
That's great! Yes, sometimes it doesn't seem like it is dirty, but needs to get refreshed once in a while. Not too often, but does. Thanks for sharing!
Worked perfectly with my R 300!
I also used a wipe damped in alcohol!
You saved my day! Thanks!
You're welcome! Thanks for your input and the feedback! Have a great day!
Thank you! After losing my mind for an hour, I watched your video and was able to get my glossy paper to start loading again. I am now alcohol patch believer! It works, people!
Thanks. I'm glad you got it fixed. Have a great evening!
Thanks, sorted paper misfeed issues on an Epson R3000. Moral of the story is take the paper out of the hopper and close the cover when not in use to stop dust getting inside.
Will try this with my L805. Thanks so much for this vid.
Thank you for the video - was going to buy a new printer and than i seen your video and used a equate lens wipe and now its working again
That's great! Thank you very much for sharing!
Sir I hope everything goes well for you in this life. Thank you so much
I appreciate your kind words! Have a great day!
Thanks to your video, I could make my printer work again! after pulling my hair off for months!!
I'm glad you got it fixed. Have a great new year!
Thank you soooooooo much. You saved my time and money. It worked and now I can take my urgent print outs. Thank you. God Bless.
Thank you!!! I bought this used and they had included a baggie of chips for the ink, which had fallen in!!!
Did this work I had change on shelf fell in I got it out but it keeps saying paper jam and clanking screeching
Thank you for this video. I found and removed a nerf gun projectile blocking the paper feed. Oh, the joys of parenthood! LOL! Works fine now!
Hi. Glad you were able to clear that. Thank you very much for sharing! Have a great day!
ohhh... i like that idea of the wipe attached to the business card... going to give it a try... i have an epson-410 that just started failing to pull in the paper... thanks
Thanks. Watched your vid and I fixed it !
Thank you so much for sharing. I'm glad it worked. Have a great day!
Thanks so simple and easy to do. Up and working again.
Good to hear! Thanks for the reply. Have a great weekend!
Pen was in mine never would of realised without this thank you!
Thanks for sharing. Have a great day!
Thank you!!! Alcohol pads worked like a charm :)
Thank you so much! My thicker cardstock paper stopped feeding correctly for months, so I would have to gently push each paper in to print. I used your method on my Epson ET-2750 and my cardstock feeds again!!!! THANK YOU!!!!
This advice got the job done on a Workforce 323. Thank you!
Thanks for sharing! Have a great day!
THIS! THIS helped me a LOT!! Thank you!!!
You're welcome! I'm glad it did. Thank you for your feedeback! Have a great day!
Thank you. You've saves me spending £60 on a new printer
Sat here for an hour. Watch this, 30 seconds later the solution. There's SOMEHOW a fucking plastic plug cover in the paper feed 🤦🏻♀️ you're a genius, but more than that, I'm an idiot. Thank you
IT WORKED ON MY 1430W! THANKS!
I used your technique and it worked!! Thanks so much
Great! Glad it did! Thank you for sharing!
Thanks a lot! I already thought my printer was gone, but I just discovered it was just a gravel piece that fell from a plant on the paper tray...
Glad you spotted it and fixed your printer! Thank you for sharing. Have a great day!
YOU ARE A LIFESAVER!! THANK YOUUU
You're welcome! Glad to help. Have a great weekend!
Great video - foreign object located and removed. Happy days :)
Thank you. Glad you resolved the problem.
thank you for this i used a denatured alcohol in mine and it works perfectly
Great! Thanks for the feedback. Have a great day!
So many good responses. I will try ii.
Great! Let us know how it goes. Good luck!
alcohol worked a treat, thanks mate. A great tip!
Thank you so much! It worked on my Epson L355 :)
You're welcome! Thank you for sharing! I'm glad it was helpful!
I didn’t have an alcohol pad, so I cut and folded a square of a coffee filter (no shedding) and wet with alcohol. Worked like a dream! Today you saved my printer from certain destruction! Thank you.
Thank you for sharing the tip. I'm glad you got your printer fixed! Have a great day!
Can confirm this helped, thanks!
Great to hear! Have a great weekend!
If instead the gear that accompanies the sheet does not move in any way, it means that there is now a hardware failure I presume.
Thanks for sharing
Wow!! It worked!! Thank you so much!!
You're welcome! Thank you for your feedback
Thanks so much. The alcohol swab stapled to a piece of card sorted mine out. I thought it had packed in.
This worked! My Epson rage can subside...for now.
I'm glad it did work! Thanks for sharing! Have a great day!
It's the exact same method on an Epson Stylus Pro 3800 and 3880 too. Basically the same feed mechanism and the same part that needs cleaning every now and again. It is especially noticeable when you print on glossy paper where more traction is needed.
Great! Thank you so much for sharing! Have a great day!
Thanks so much. It worked!
you're a genius
you saved my life thank you so much!!!
THANK YOU! I fixed my printer!
I'm glad you did! Have a great day!
@@303electronics I did after that ty. Have good one too.
That's was a great tip. I put a wipe damped in alcohol an it did the trick. Thank you
Awesome! Good work! Thanks for the feedback!
Actually worked, thanks
You're welcome! Have a great day!
Thank you! Worked the first time!
Eu assisti vários vídeos, tentei muitas coisas e somente a sua funcionou! Tão simples e objetivo. Thank you!
WTF, dude! That worked even on a ET 2750!! Please get hired by Epson to tell them how to get their stuff to work :)
Thank’ My EPSON ET-14000 700€ work now !!! 🎉🎉🎉🎉
That's awesome! I'm glad you got it fixed. Thanks for the feedback!
Thanks man. I found a Dog in my Printer. By the way Thank you so much. it work for me. Legit. God Bless
Haha, thanks for sharing! Glad you got it fixed! Have a great day!
Thanks God this really helps!!!!
Thanks man!!! Worked out.
I'm glad it worked! Thanks for the feedback! Have a great day!
Great video, thanks for the help, problem fixed
Thanks for the feedback! I'm glad you got it fixed. Have a great day!
Thanks!
Thank you so much for the feedback and for your contribution! Very much appreciated! Thank you, thank you, thank you! You are very kind! I am happy that this video helped to get your printer back to work. Have a beautiful day!
Spent a couple hours messing about only to find an entire key in the back section of mine .. no idea how it got there but its working now !
Thank you I used my Blowdry and fixed it!
If you have an Epson R285 or R2/R3 series printer and the paper is not feeding through or coming out wonky there is a plastic white roller, in between where the paper goes, manually rotate it gently to the opposite side and hey presto the paper feed issue will have been resolved.
My printer model is Epson L805. Any alternative for alcohol?
it's a shitty printer, throw it away and buy a Canon. Cleaning a printer roller each 10 papers is not worth it
Brilliant idea solved my prob
im gonna try this. i have an ET 4700 and omg a popsicle stick fell off my wall into my printer feed and omg its not picking up! I hope this works!!!! I need this printer ugh its sold out not even like i can just buy another or i would!
Absolutely! Go for it. I know how frustrating it is to see the printer shortage we have today. Never thought I'd see that in my lifetime. I wish you the best!
I almost tossed my printer. Thanks for this video
Hi , my printer won’t pull through on the left side, as you are looking from the front.any ideas.?
There may be something in the way or a bent/broken paper stopper at the bottom of the tray
@@303electronics Thank You, Would you know how I can get into an Epsom Xp 405 to try and clear.🤔🤔
Found a spring when I took my r380 apart to see why it wasn't working. Is there a spring in the back of the part that the paper rests on? This is a very large spring and I didn't think it came out of the printer.
Sometimes, it can be part of the paper level sensor
I cleaned the paper feed and noticed the rubber part was quite worn like an old belt. I put some hair oil to moisturize it, wiped it down. It worked. 😂
Thank you, it worked
Awesome! I'm glad you got it fixed. Thanks for sharing. Have a great weekend!
I have a 7-year-old dance contest in my kitchen and am trying to figure out why my new Epson ET 2803 top feed printer is bending the lower left corner of every page. It's set to manual double sided printing. I checked for anything in the way, took paper out restacked and put it back, blew it out (because you never know) and still each corner is seriously bent. If this is in the video, I'm sorry I missed it but the Beach Boys and a 7-year-old are ... hilarious, I mean distracting!
thanks so much i was wondering what was goin on and i found pencils inside😳
I appreciate your feedback. Glad you got it fixed!
thanks man it helped ❤❤❤❤❤❤
You're welcome! I'm glad it did. Have a great day!
Oh my goodness I fixed it thanks to u thank u thank u I'm a new subscriber
Thank you very much for subscribing and for your support!!!! Have a great day!!!
Thank you so much the alcohol worked!
Hello, mew in your channel, i have a question,....i purchased an Epson Ecotank et 15000, a few weeks ago,...I purchase it solaly cause they advertised it that it could print 13×19 paper size, turns out a lie, it can only do 11×17,....but also, the lady i consulted with while doing my research for it, said I vould use "cardstock" on the paper tray,....turns out, that was a lie too. Now I get a "gost paper jam message".
Here is the thing, I was willing to pay over $700 for a few more inches 13×19.
But now, if i wanted to only print 11×17 i could of payed much less for something like that.
So, how can i fix this false "paper jam message"...or.....or,....is there a way to print in the full 13×19 size, ofcourse there will be borders but at least to be able to print a little bigger?.....and on not to heavy cardstock???
Thank you ahead of time.🙏
Thank you so so much! We were about to throw the printer and it turned out 2 lego men were stuck in the roller!
🙂 Glad you got them free! 😃 Thanks for the update. Have a great day!
Smart 👍🏻 thanks bro
You're welcome! Have a great evening!
Thank you, that worked