Huge thanks to Mike Likes Knives for sending this great group of Spydies! Rival Sons on the soundtrack. If you haven't heard them, go check them out! / rivalsons
Here's the average numbers for each blade: Grey PM2 20CV - 60 Red Manix2 20CV - 60.65 Grey Yojimbo 20CV - 60.3 Red Para3 M390 - 61.15 Red PM2 M390 - 61.5 Blue PM2 M390 - 60.65 Cute Little Thing M390 - 58.15
😂 wrong vid! Rival Sons are one of my favorites! A lot of old asses like me, say there is no good music today. Just not true! There is great music in every generation.
Thank you very much for my own video. The dial was a lot easier to see. I hope it didn't put the camera in your way. The results were pretty good. I am good but I did want a unicorn! (A 62) That last slip joint is a Green Thorne. Feel free to PM I that. Again Thank you. I have more to send. I can live with 60-61.5. Those are pretty solid numbers.
You forgot to say: "Welcome to the HRC Police Channel!" : - ) Thanks for the show. She made a Key Lime pie today, while I was out spraying weeds. I think today was the first day without rain, in about 10 days! So I decided to watch this. As I sit down to eat two pieces, and drink some iced tea.
That's the preload dial. Once contact is made with the test piece, you turn the wheel at the bottom of the column until that needle is centered on the dot. At that point, there is a lever at the bottom of the column that you push to release the major load. I'm going to make a vid on how it works soon.
Nothing was under 60. I must be pretty lucky with my manix m390 that I tested in our local heat treatment company (PT UNITED SUPERSTEEL) and it came out at 61.8 avarage out of 3 hits and I saw you testing same knife( broun g10 version ) in the other video at 62hrc. I know you like manix too and it's my first ever and it quickly became my absolute favourite design by Spyderco.. Today I got M4 Shaman.. I'm curious how will that test.. Spydie M4 I've seen here where all above 62 and under 65hrc.. Quite a big difference in hardness.. 3 point will make huge difference in performance.. I'll post it up on insta later
I love the Manix! The DLC m390 is the only m390 I own. The M4 Shamans have all been 63-64.5ish range. Personally, I love Spyderco for doing all of these steels! 😁👍
![Chino Pacas - Modo Capone (with Drake & Fuerza Regida) [Video Oficial]](http://i.ytimg.com/vi/zjv8TQ0gBkg/mqdefault.jpg)
The knives are okay and everything, but I come here for the music😉 Great batch Mike!
My wife says the music is too loud! I told her she's too old! 🤕 Sometimes I don't think before I speak!
jcoolG19 2 🤣🤣.... 🤣🤣🤣 oh tell me about it bro😁 I definitely know what Not to say:)
Here's the average numbers for each blade:
Grey PM2 20CV - 60
Red Manix2 20CV - 60.65
Grey Yojimbo 20CV - 60.3
Red Para3 M390 - 61.15
Red PM2 M390 - 61.5
Blue PM2 M390 - 60.65
Cute Little Thing M390 - 58.15
Isn't 20CV best at 62-63 HRC ? I'm a bit disappointed, got a Seki-City endela in 20CV
Thanks for sharing Kurt!
Kurt another good video!! Not bad results except for the little slippy!! Thanks for sharing brother!!👊👊👊
Very cool!! Thanks for more results Kurt!
Nice results!! Video is 👌👌 good quality. Can see great.
Thank's for sharing!
Been waiting for this!
so the music was so good i wasnt paying attention to the video at all. ill have to rewatch it another time lol.
I'm just happy they don't block SRV!!!
😂 wrong vid! Rival Sons are one of my favorites! A lot of old asses like me, say there is no good music today. Just not true! There is great music in every generation.
Wow really amazing video!!! :D
The quote of the day. “I’ll take 2pokes cause you didn’t tell me not to!” 😂😂😂
Well ya didn't! 😌
It’s perfect!! Best quote ever!😂 I couldn’t be happier!
Does it leave little dents in your blades or something?
🤘🤘🤘🤘
Thank you very much for my own video. The dial was a lot easier to see. I hope it didn't put the camera in your way. The results were pretty good. I am good but I did want a unicorn! (A 62) That last slip joint is a Green Thorne. Feel free to PM I that. Again Thank you. I have more to send. I can live with 60-61.5. Those are pretty solid numbers.
It was a pleasure Mike! Great bunch of knives! That little Green Thorn is sweet! I'll shoot it and send ya the results.
What the hell is the noise in the background?!
Idk how my channel got un subbed to your channel, because i subbed to your channel a while back, anyways great results
I restarted the channel a couple months ago. I didn't think I was going to do RUclips anymore! 😁
@@jcoolG192 aaaaa I see good!! 👍 I remember when I heard that you werent going to post anymore im happy your still posting
You forgot to say: "Welcome to the HRC Police Channel!"
: - )
Thanks for the show.
She made a Key Lime pie today, while I was out spraying weeds. I think today was the first day without rain, in about 10 days!
So I decided to watch this. As I sit down to eat two pieces, and drink some iced tea.
I LOVE Key Lime pie! 😋
I wonder if I can rename the channel? 🤔
You seeing any real difference between the USA and Taiwan Spyderco's?
Not really. Spyderco from Taiwan, Golden or Japan seems decent.
@@jcoolG192 I'd thought that would be the case, Spyderco is pretty consistent.
@@johnscarborough4746 they really are. Considering the number of steels and different models, from different countries, pretty amazing!
What does the small dial due to the left of the big dial?
That's the preload dial. Once contact is made with the test piece, you turn the wheel at the bottom of the column until that needle is centered on the dot. At that point, there is a lever at the bottom of the column that you push to release the major load.
I'm going to make a vid on how it works soon.
Thanks
Nothing was under 60. I must be pretty lucky with my manix m390 that I tested in our local heat treatment company (PT UNITED SUPERSTEEL) and it came out at 61.8 avarage out of 3 hits and I saw you testing same knife( broun g10 version ) in the other video at 62hrc. I know you like manix too and it's my first ever and it quickly became my absolute favourite design by Spyderco.. Today I got M4 Shaman.. I'm curious how will that test.. Spydie M4 I've seen here where all above 62 and under 65hrc.. Quite a big difference in hardness.. 3 point will make huge difference in performance.. I'll post it up on insta later
I love the Manix! The DLC m390 is the only m390 I own. The M4 Shamans have all been 63-64.5ish range. Personally, I love Spyderco for doing all of these steels! 😁👍
Change muzik