Room heater safety switch bypass
HTML-код
- Опубликовано: 6 окт 2024
- Please consider to Subscribe my channel as I need your support. Thank You.
Camera gears I used,
Main Camera: Panasonic Lumix GH5: www.amazon.ca/...
Lens: Panasonic Lumix 12-60MM, F2.8-4.0: www.amazon.ca/...
ND Filter: Gobe NDX 62mm Variable ND: www.amazon.ca/...
Action Camera: Osmo Action by DJI: store.dji.com/...
Microphone: Rode VideoMicro Compact On-Camera Microphone: www.amazon.ca/...
Memory Card: SanDisk 64GB Extreme Pro SDXC UHS-I Card: www.amazon.ca/...
Micro Sd Card: Extreme 64GB microSD UHS-I Card: www.amazon.ca/... - Хобби
Thank you: this worked wonderfully. I fixed my Comfort Zone fan/heater. Thank you sooooo much.
Out of all the videos I watched on here on how to fix this cheap space heater. Your bypass method was the only one to work for me. Thanks for the video and finally getting my space heater working again!!!
You are welcome.
I just threw out my heater and then I said, wait go to RUclips. I watched this got the heater out and it works like a charm! Thanks soo much!
Ggreat to know that, thanks!
YOU ARE THE MAN! Just last week my heater cut off found out it was the safety switch I tried to mess with it couldn't do it, so I went to buy another one. Later thought about maybe a way to fix it before I threw it away looked on RUclips and there you were! Your a life saver!
I an really pleased to know that. Thank you!!
Thank you so much! I am hopeless earlier but you’ve helped me fix my heater! Saves me money too! 💙
Thanks alot my man , You helped me a lot , i just now fixed two heaters because of you , Thanks again 🖤
brother thank you for your video. I manage to fix my heater because of your tutorial. Thank you so much
You are welcome!
Thank you sooo much for this tutorial!!!! I did this successfully today and i felt like an engineer hahaha. Great Video!
Glad that it worked, thanks for watching!
OMFG IT WORKED IT WORKED🔥🔥🤘🏾🤘🏾🤘🏾🤘🏾🔥🔥🔥🔥THANK U SO MUCH U HAVE SAVED ME MONEY I WISH I SEEN THIS B4 I THREW AWAY 2 HEATERS JUS IT WORKED GUYS TRY IT THANK U SO MUCH MY FRIEND I WILL BE HERE MORE
You are welcome!
wow i didnt expect this to work. it worked!
Great 👍, Well done!
I just watched your vid and tried it. WORKS LIKE A CHARM for my black + decker bhd101w personal desktop heater
Great 👍, Glad to know that!
Worked liked a charm. Make sure if you do this to use electrical tape, and properly isolate the connector, don’t want to start any house fires 😅
Absolutely! Thanks for the very helpful advice. 👍
Thank You, my Friend, it Worked! Excellent Advice!
You are welcome! Glad to know that.
Thank you for this very good video .I will be doing the same procedure .
You are welcome!
Thanks brother...going to do the same now
No problem bro! Go ahead. Just make sure you properly isolate the joint. Thanks.
Thank you sir
You are welcome.
Thanks so much! Great video.
You are welcome!
indeed it's helpful 🙂
Just be sure to unplug it when not in room!
Nice video!
It worked thanks😂
You are welcome!
I bought a comfort zone heater last year and the safety started the same problem. The pin that pushes up through hole didn't go far enough to push the contacts together. So I took a match end to see what the problem. There was a little metal strip that across the after taking off the round button platform. I pushed the end of the match against it till the light came on , and turned on the switch and it came on. So I pushed the round button back on and tapped it till the light came on. Held it down. You have to turn it a certain so it will stay on. Set it on a solid surface.
Great 👍! But you need to remember that the switch is not working and it is not safe. Now you can either change the switch or change the entire unit. Good luck!
@@SMAVlog it has a safety feature that if it get too hot it will shut off.
Mine is now blowing cold air for some reason any solution?
Check the thermostat and its connections.
Legend dude that was my problem thanks heaps a like and a sub coming your way my friend
You are welcome my friend!
I just opened mine up today and there is no safety switch like that anywhere the heater I got looks exactly same but the name on it is lloytron do u know if this has a safety switch and where is it located
Send me some pictures of inside, I can try!
I had that same problem with a space heater. I cut the wire going into the switch and the wire coming out of the switch. Then I joined the two wires using wire crimp connectors followed with electrical tape covering the joint.
Good job! Hope it worked for you well 👍.
i think my my comment didn’t post so im gonna post it again 😅 my heater fell a few days ago and it had a burn smell when i turned it back on. A few days after it stopped working. the light of the heater turns on but the heater does not work. what do u think i can do?
Oh My God, we have Replaced almost 6 of these types of Heater within few years...We are thinking of throwing them away...Somehow, the same Problem of these Heaters are still Lightning Up when plugging into the outlet, but they all are NOT WORKING, NOT RUNNING/HEATING UP. We were using these Space Heaters for awhile and all of the sudden, once came and turned it on, it did NOT Work. Some of them have very bad Smell when plugging in with the mode on...I just hope if you could HELP me to STOP THROWING these HEATERS away since we have Repeatedly Getting New Ones within Months and within/ every other Year...THANK YOU VERY MUCH! 🙁☹️🥲
I just tilt mine backwards keep something under it and works fine
Great 👍!
Where can I get this screwdriver nothing fits to unscrew it
It should be a regular star screwdriver and should be available at any dollar store.
Which wire is the switch connected too?
I need to change the switch!
Please watch the video again, thanks 😊
I had 2 heaters broken in this way. After I did the fix one of them worked but it smelled like it would catch on fire. I don't know if mine was some kind of a smart switch that would break if something went wrong or something. Or do you think it is the motor?
Probably but I suggest that you open it and check all the joints and make sure you use electric tape and also make sure nothing is touching the heater portion of it inside. It should make smell in the beginning and soon this smell should go away. Please keep close eye on it while using it at least for first half hour after fixing.
Hello I also have this exact heater but mine keeps turning off and on what do you think I do?
There is a thermostat inside. Just try to bypass it!
@@SMAVlog Bypassing the thermostat switch risks overheating, and therefore could cause a fire. Instead, the unit should be cleaned. The dust clogs the unit causing it to heat up. The thermostat switch is designed to shut it off before it overheats. If the thermostat switch is bad, it should be replaced. The same is true for the tipover switch.
Momentarily bypassing a safety switch is fine if all you want to do is determine if the switch is bad. But upon finding out the switch is bad, it should be replaced immediately. The unit should not be used until then.
Good idea! But I have a better solution, now as the shops are opening their doors, why not buy a new $20 heater. My solution was only for the lockdown moment, when we suppose to stay at home and survive with whatever we had around us. Thanks
hello , my heater fell 2 days ago. It had a burn smell after i turned it on , the smell went away. later that day about 24 hours later the heater was working fine and no smell ! Then the next morning the heater light will turn on but the heater will not work. What do you think this could be?
Follow the process and check the safety switch! You might be lucky🤞
Perfect! ill definitely try it ! just wanted to get a second opinion before i tried it , thanks 😊
No worries 👍
SMA Vlog Do you think that it will work if i dont have the switch on the bottom? i dont have the little button but i think that it has the fall switch inside
i mean my heater doesn’t have the little button on the bottom like yours ^ do you still think it will work? should i open it ?
Thank you sir
You are welcome!