Tip - if you have a model with the control panel at the TOP of the door instead of the front (mine was LDT5678ST) you need to remove all 6 screws running the length of the door outside the gasket (which will release the front and inner metal panels, have a set of hands to catch the front!). This stumped me for a few mins. After realizing that, easy repair!
Wow. I really appreciate the way you make these videos. They're very helpful and concise. I was able to find more immediately useful information in two of your videos than my previous 45 minutes searching the internet for answers.
Great video and great service. Literally had the failure on Saturday, found this video on Sunday and ordered the part from them through the link attached and replace the control panel on Tuesday. All is well...
Thank you so much for this great video! We have a LDP7708ST and have to pull up on the handle and kind of push in the door for it to start. I pulled out the dishwasher and did the continuity test and it did beep on both sides when the door closes so the test passed. I plugged it back in and now it's acting worse than prior. It's stopping midway through a cycle. Prior it would stop right at the beginning, but now it's stopping after running a hour. It beeps and than flashes the time remaining.
The alternative method of slamming the dishwasher door to make the control panel stop freaking out has finally failed me. So I ordered a new control panel from your site, and hope this will fix the issue before I rip the door off :)
@@PartsDr I forgot about this. I've had the part installed for awhile and it's worked great. When comparing the two you could see LG knew there were issues, as the new part was redesigned with more coating on the circuit board to prevent moisture ingress. Thanks!
HELLO DEAR..We have an LG 425 dishwasher at home. When turning on all its lights, it starts blinking at the same time and the device beeps and no program is running, or if it is running, it turns off after a while and the device almost freezes. And this happens again and again. I would be very grateful if you could help me.
We were told a certified LG repair guy had to replace parts. We did everything that you did in the video. However it doesn't turn on. The original panel has power but the buttons on the right don't work.
How do I remove the handle from the old control panel and the control panel on the far right? I'm afraid if I force the handle out it will break. Likewise the square circuit board on the right hand side is wedged in place. I'm a tad disappointed that this wasn't covered.
Thank you I was able to get the part and I fixed it myself. Very easy thanks to you video. It was the 2nd time the panel assembly bit the dust. Not crazy about LG my neighbors died 2 months ago and it was only under 2 years old. That is why the part is so hard to get. It doesn't last long. I think the location it is in allows water to get in but what would I know :)
@@PartsDr My control panel has failed twice also. I was just getting ready to dump the entire LG dishwasher and start over. I think I can fix this myself now. The repair man charged me over $400.00 last time it failed.
Just order my panel today. Worked after doing a hard reset that I found to do on a Google Search. Worked twice and then panel started flashing. Dishwasher is awesome, I am wondering if moisture is getting into the panel somehow. Can't wait to get the new panel and take it apart to take a look inside.
I'm having issues with my LG ldf5678ss dishwasher. I'm not sure if it's the drain pump or control panel that's causing an issue with it draining. Sometimes it drains, sometimes it doesn't, and sometimes the dishwasher stops mid cycle and there's a ton of water inside. But I can always drain it by holding the start button for 3 seconds, except those few times in winter where I thought the lines were frozen. Some of the control panel's led lights aren't lit up, and one time during a quick wash cycle, all of the control lights began flashing faster and faster and the dishwasher just shut off with 17 minutes left in the cycle. I opened it up, and there was a ton of water inside, but I was able to manually drain it and start another cycle without a problem. Could a bad control panel be causing these issues? Sometimes we have to touch the buttons multiple times to get it to work too.
MY MODEL IS LDP6797BD. I am pretty sure I looked on your site and don't have it. Its because this is the 2nd time it is being replaced. My neighbor bought same model and 1-1/2 years in their panel went also.
It looks like we are temporarily out of stock of this part. You can click "Notify When Available" on our site and enter in your email address to be notified when we receive more in stock here: partsdr.com/part/agl75172606-control-panel-assembly
Great video, thanks! Question: I have an LDT6809SS. All of the buttons work fine and the dishwasher functions as it should. The problem I have is the LEDs/readout lights are slowly burning out or... something. It appears that there are two parts that make up the display, part numbers EBR85054302 and EBR33469708. Do you know which part is for the readout LEDs?
It doesn't look like either of those two part numbers would be for the LCD. It looks like it is only sold as part of the control panel assembly here: partsdr.com/part/agl75675225-control-panel-assembly
Quick question : my ldp6797bd was glitching and beeping . The day after, no more power on the panel. Some people said to remove the board inside the pannel and check for damage soldering. Any of you ever tried that ?
Very good video but can you explain some problems you may be having that warrants this replacement? And explain the difference between the control panel assembly vs the main control board (part #PD00057513, and the control board(part# PD00050867). Thank you.
I have power to my dishwasher. I press power on, press start, close the door within 4 seconds and all it does is blink 2:28 repeatedly. Does nothing. No sound, no wash. Tried calling LG and they were not helpful. I’m trying to find out LG bad control panel symptoms. Any help if my issue is control panel related. Thanks
So my control panel lights up when i turn on the breaker and after a few seconds the lights go out like it always did. But i can't turn it on after that. None of the buttons do anything and the lights won't come on. Could this be a issue with the control panel?
Thanks for posting! My LG dishwater control panel has somewhat broken away from the door housing where the 6 screws go. It still works but is hanging down a bit when closed. Any ideas to correct or should I just get a new control panel? Thanks!
Unfortunately, when this happens there isn't a good fix besides replacing the control panel. We have seen people try to glue them, but the glue isn't strong enough and breaks pretty quickly.
Sir Question; I have the LG Dishwasher Model LDT5665WW. The control panel does not work at all. Will not turn on, no display of L.E.D.'s The repair technician came by and diagnosed it as a "Bad U.I." I'm assuming bad User Interface is what he meant. Anyways, I bought the unit brand new in November 2018. User Manual for LG says control panel is warrantied for 5 years. The repair tech says "No" that the UI is NOT covered under warranty. Please help! Thanks
@PartsDr I finally found your website and looked up my model number and it says "No longer available", so I will have to figure out another way to purchase I guess. But my model number is LDF5545ST
@@DD-zz4dd There is a replacement for the discontinued one, you can find it here: partsdr.com/part/agl75172632-user-control-and-display-board?model=LDF5545ST
I have this model in White and need a control panel. I am not sure if you are out, or if I'm not searching the correct name. LDF5545WW is my model number.
Hi. the pump won't stop running on an LG DW model LDT7808. Could that problem originate in the control panel? The machine is drained so not the problem.
@@peggystirton8074 Hi Peggy, it could be this part that is bad. I'm sorry, we are not able to troubleshoot this for you. Let us know what you find as the solution.
I have to say that this model of dishwasher/control panel is just junk. I had one replaced under warranty and am pretty sure that after less than a year (and now out of warranty) I will be ordering a new panel and replacing it in the not too distant future. Sad too as we bought an LG dual oven stove and one of the top end LG fridges at the same time and they have both been bulletproof.
I’m in the same boat. Bought mine in Oct 2018 and the control panel has separated from the door. (2 of the 6 screws are left intact) LG was like “Oh well... sucks for you...”
Gee....Looks like I'm in the same boat. I bought mine in Nov. 2018. Repair tech came by and said it's NOT covered under warranty and that I have a bad "U.I" LG Owners Manual says 5 years on control panel. Isn't the U.I. (user interface) part of the control panel?
Not happy with LG AT ALL. 2 year old brand new dishwasher and I have already replaced the pump and now the numbers on the control panel are going out. POS
Tip - if you have a model with the control panel at the TOP of the door instead of the front (mine was LDT5678ST) you need to remove all 6 screws running the length of the door outside the gasket (which will release the front and inner metal panels, have a set of hands to catch the front!). This stumped me for a few mins. After realizing that, easy repair!
Great tip! Thanks for sharing!
Wow. I really appreciate the way you make these videos. They're very helpful and concise. I was able to find more immediately useful information in two of your videos than my previous 45 minutes searching the internet for answers.
Great to hear! Thanks for sharing!
I don't want to buy LG Dish washer anymore. but this information really help, I'll buy the part. Thank you so much!!!!
Thank you! We are glad you found it helpful!
Great video and great service. Literally had the failure on Saturday, found this video on Sunday and ordered the part from them through the link attached and replace the control panel on Tuesday. All is well...
We love to hear stories like this! Thank you for sharing.
Thank you so much for this great video! We have a LDP7708ST and have to pull up on the handle and kind of push in the door for it to start. I pulled out the dishwasher and did the continuity test and it did beep on both sides when the door closes so the test passed. I plugged it back in and now it's acting worse than prior. It's stopping midway through a cycle. Prior it would stop right at the beginning, but now it's stopping after running a hour. It beeps and than flashes the time remaining.
So simple with your instructions! Thank you!
That is great to hear!
The alternative method of slamming the dishwasher door to make the control panel stop freaking out has finally failed me. So I ordered a new control panel from your site, and hope this will fix the issue before I rip the door off :)
Thanks for the order Donny! Let us know how the repair goes for you after you get the new part installed.
So I'm not the only one that slams it lol
@@PartsDr I forgot about this. I've had the part installed for awhile and it's worked great. When comparing the two you could see LG knew there were issues, as the new part was redesigned with more coating on the circuit board to prevent moisture ingress. Thanks!
@@CyclonesWorld Great to hear! Thanks for letting everyone know.
SO helpful. Thanks. To the point, and you even answered my question about the motherboard not being sold seperately with control panel. Thanks again.
That is great! We are glad we could help!
Great video! Thank you for sharing this. I plan to buy my control panel from you today!
Thank you! Let us know how the repair goes!
Great directions and super easy. Thanks.
Thanks, we are glad you found it helpful!
Thanks for the video...your instructions were clear and easy to follow.😊
Great!
Took about three minutes to install. Received the part in about 4 days.
Nice job fixing it yourself!
HELLO DEAR..We have an LG 425 dishwasher at home. When turning on all its lights, it starts blinking at the same time and the device beeps and no program is running, or if it is running, it turns off after a while and the device almost freezes. And this happens again and again. I would be very grateful if you could help me.
Thank you. This just saved me some money!
That is great!
Great Video and I can definitely do that IF I CAN FIND THE PART :(
We were told a certified LG repair guy had to replace parts. We did everything that you did in the video. However it doesn't turn on. The original panel has power but the buttons on the right don't work.
Maybe the new part is defective? Try putting the old part back in to make sure it still powers on.
How do I remove the handle from the old control panel and the control panel on the far right? I'm afraid if I force the handle out it will break. Likewise the square circuit board on the right hand side is wedged in place. I'm a tad disappointed that this wasn't covered.
Thank you I was able to get the part and I fixed it myself. Very easy thanks to you video. It was the 2nd time the panel assembly bit the dust. Not crazy about LG my neighbors died 2 months ago and it was only under 2 years old. That is why the part is so hard to get. It doesn't last long. I think the location it is in allows water to get in but what would I know :)
Nice job fixing it yourself! What type of symptoms did yours have when it failed?
@@PartsDr My control panel has failed twice also. I was just getting ready to dump the entire LG dishwasher and start over. I think I can fix this myself now. The repair man charged me over $400.00 last time it failed.
@@kimcopeland161 Let us know how it goes for you!
Yes, we are completely dissatisfied with LG. They should not be allowed to sell dishwashers. never will buy anything from them again.
My LG Dishwasher has controls on top of door. The controls are fading and I think it’s from steam leaking from door gasket, any suggestions?
Just order my panel today. Worked after doing a hard reset that I found to do on a Google Search. Worked twice and then panel started flashing. Dishwasher is awesome, I am wondering if moisture is getting into the panel somehow. Can't wait to get the new panel and take it apart to take a look inside.
Nice! Let us know how the repair goes!
How did you do the hard reset? Mine is completely dead
Thanks so much. This video was helpful
You're welcome!
Where is the wifi module? How can I remove it?
I'm having issues with my LG ldf5678ss dishwasher. I'm not sure if it's the drain pump or control panel that's causing an issue with it draining. Sometimes it drains, sometimes it doesn't, and sometimes the dishwasher stops mid cycle and there's a ton of water inside. But I can always drain it by holding the start button for 3 seconds, except those few times in winter where I thought the lines were frozen. Some of the control panel's led lights aren't lit up, and one time during a quick wash cycle, all of the control lights began flashing faster and faster and the dishwasher just shut off with 17 minutes left in the cycle. I opened it up, and there was a ton of water inside, but I was able to manually drain it and start another cycle without a problem. Could a bad control panel be causing these issues? Sometimes we have to touch the buttons multiple times to get it to work too.
MY MODEL IS LDP6797BD. I am pretty sure I looked on your site and don't have it. Its because this is the 2nd time it is being replaced. My neighbor bought same model and 1-1/2 years in their panel went also.
It looks like we are temporarily out of stock of this part. You can click "Notify When Available" on our site and enter in your email address to be notified when we receive more in stock here: partsdr.com/part/agl75172606-control-panel-assembly
Great video, thanks! Question: I have an LDT6809SS. All of the buttons work fine and the dishwasher functions as it should. The problem I have is the LEDs/readout lights are slowly burning out or... something. It appears that there are two parts that make up the display, part numbers EBR85054302 and EBR33469708. Do you know which part is for the readout LEDs?
It doesn't look like either of those two part numbers would be for the LCD. It looks like it is only sold as part of the control panel assembly here: partsdr.com/part/agl75675225-control-panel-assembly
Quick question : my ldp6797bd was glitching and beeping . The day after, no more power on the panel. Some people said to remove the board inside the pannel and check for damage soldering. Any of you ever tried that ?
This is the exact part I need to replace ... mine is crack right now the middle.
Nice!
@@PartsDr it will be nice if you can have a video to show how to replace the oven light 💡
Very good video but can you explain some problems you may be having that warrants this replacement? And explain the difference between the control panel assembly vs the main control board (part #PD00057513, and the control board(part# PD00050867). Thank you.
What is the model number of your dishwasher?
I have power to my dishwasher. I press power on, press start, close the door within 4 seconds and all it does is blink 2:28 repeatedly. Does nothing. No sound, no wash. Tried calling LG and they were not helpful. I’m trying to find out LG bad control panel symptoms. Any help if my issue is control panel related. Thanks
So my control panel lights up when i turn on the breaker and after a few seconds the lights go out like it always did. But i can't turn it on after that. None of the buttons do anything and the lights won't come on. Could this be a issue with the control panel?
Yes, that would be a good guess from what we have seen.
But how do you install the sound barrier mat?
Hi,
Is the wifi module integrated within the control panel?
Yes, on most of the ones that we have seen the wifi module comes with the control panel.
Thanks for posting! My LG dishwater control panel has somewhat broken away from the door housing where the 6 screws go. It still works but is hanging down a bit when closed. Any ideas to correct or should I just get a new control panel? Thanks!
Unfortunately, when this happens there isn't a good fix besides replacing the control panel. We have seen people try to glue them, but the glue isn't strong enough and breaks pretty quickly.
Parts Dr thanks for the reply! ... that’s kind of what I thought. I wish they made those plastic screw brackets a little more sturdy.
Agreed.
is it possible to just replace the board instead of the whole assembly?
No, they do not offer it separately from the control panel assembly (if you are referring to the board shown in this video).
Sir Question; I have the LG Dishwasher Model LDT5665WW. The control panel does not work at all. Will not turn on, no display of L.E.D.'s
The repair technician came by and diagnosed it as a "Bad U.I."
I'm assuming bad User Interface is what he meant.
Anyways, I bought the unit brand new in November 2018. User Manual for LG says control panel is warrantied for 5 years. The repair tech says "No" that the UI is NOT covered under warranty.
Please help!
Thanks
We cannot help with factory warranties. You would need to contact LG directly to ask about that.
I clicked on the link to order and it doesn't work. How do I order a control panel?
What is the model number of your dishwasher?
@PartsDr I finally found your website and looked up my model number and it says "No longer available", so I will have to figure out another way to purchase I guess. But my model number is LDF5545ST
@@DD-zz4dd There is a replacement for the discontinued one, you can find it here: partsdr.com/part/agl75172632-user-control-and-display-board?model=LDF5545ST
I have this model in White and need a control panel. I am not sure if you are out, or if I'm not searching the correct name. LDF5545WW is my model number.
This is the white control panel for your model here: partsdr.com/part/agl75172612-control-panel-assembly?model=LDF5545WW---00
@@PartsDr thank you. Ordered from your website.
@@yepyepuhhuh Thank you!
Hi. the pump won't stop running on an LG DW model LDT7808. Could that problem originate in the control panel? The machine is drained so not the problem.
Hi Peggy, that type of problem doesn't sound related to this part. Most commonly, when the part shown in the video fails the buttons won't respond.
The buttons don’t work at all once the pump starts, even to end power. There is zero response. So we had to wonder.... So frustrating.
@@peggystirton8074 Hi Peggy, it could be this part that is bad. I'm sorry, we are not able to troubleshoot this for you. Let us know what you find as the solution.
I have to say that this model of dishwasher/control panel is just junk. I had one replaced under warranty and am pretty sure that after less than a year (and now out of warranty) I will be ordering a new panel and replacing it in the not too distant future.
Sad too as we bought an LG dual oven stove and one of the top end LG fridges at the same time and they have both been bulletproof.
I should update this and say that the part now costs so much in Canadian after tax that I have junked the whole washer and ordered a new Whirlpool.
I agree and LG's customer service is horrible.
I’m in the same boat. Bought mine in Oct 2018 and the control panel has separated from the door. (2 of the 6 screws are left intact) LG was like “Oh well... sucks for you...”
My panel split like the plastic is shrinking. Glad I am not the only one having the same problem. I was blaming the wife and kids for the issue.
Gee....Looks like I'm in the same boat. I bought mine in Nov. 2018. Repair tech came by and said it's NOT covered under warranty and that I have a bad "U.I"
LG Owners Manual says 5 years on control panel.
Isn't the U.I. (user interface) part of the control panel?
Not happy with LG AT ALL. 2 year old brand new dishwasher and I have already replaced the pump and now the numbers on the control panel are going out. POS
Sorry to hear that!