I'm glad I watched this DIY video on how to replace a broken garage door hinge. It's good to know that each hinge position on the garage door has a different number, starting with #1 at the bottom and increasing towards the top.
Awesome video! My wife backed into the garage door tonight and one of the rollers popped off. Needed about 5 mins of the video and had the door fixed in no time THANKS!!!!
By fare the best video I have seen, I was just about to start this project when I saw your video pop up on my screen. Glad I watched the whole thing before I started my project. Great job and great information. Simplicity💪🏾💪🏾💪🏾💪🏾👋🏽👋🏽
Wonderful demo with crystal clear explanation of why and how. Your dexterous carrying out of changing the wheels is just a pleasure to watch! Thank you for this superb presentation!
And he even explained why other ways aren't the proper way without dragging it on. He even even threw in some bits about his own company without taking much time away! That last part alone eats up 2-5min for other videos. Nice, quick, easy, to the point, and even managed to throw in some mentions of his business in a straightforward video. AND the video angles were great!
Thank you for a "no-nonsense" process. I followed your instructions to replace the rollers and now my garage door opens/closes with almost no grinding noise! I also did put a squirt of WD40 on both brass pulleys on either side top of the doors to remove the squeal. Great video !!
Excellent video and glad you called out the hacks and naysayers. Watched a video before this where the guy bent the heck out of the track and didn't unplug the opener
Excellent DIY vid. Wow, insulated garage door, dry-wall, air unit, Flat panel TV, large red LCD clock... Was really hoping you'd turn the camera around and pan inside the rest of that awesome looking man-cave.
This is a clear and concise tutorial, though I'm not sure what the special professional tools are that he refers to at the beginning. Other than the track-straightening tool he shows in passing near the end, every tool the presenter uses to perform the "hinges and rollers replacement" the video title refers to are ordinary tools any homeowner can get or may already have. Anyway, thanks!
I just had a mini split installed in my garage. How would I ajust the bottom roller to close a gap between the door and the weather stripping? Awesome Video!
Thanks guys, doing this during quarantine and don't have room for an error. This video was exactly what I needed to get the job done without a mistake.
I'm glad I watched this DIY video on how to replace a broken garage door hinge. It's good to know that each hinge position on the garage door has a different number, starting with #1 at the bottom and increasing towards the top.
Excellent, helpful. This is why I always watch several videos before doing the fix.
Awesome video! My wife backed into the garage door tonight and one of the rollers popped off. Needed about 5 mins of the video and had the door fixed in no time THANKS!!!!
Do you have proof it's your wife
Charge her for your time, LOL!
By fare the best video I have seen, I was just about to start this project when I saw your video pop up on my screen. Glad I watched the whole thing before I started my project. Great job and great information. Simplicity💪🏾💪🏾💪🏾💪🏾👋🏽👋🏽
Wonderful demo with crystal clear explanation of why and how. Your dexterous carrying out of changing the wheels is just a pleasure to watch! Thank you for this superb presentation!
Brother the way you explained this was absolutely perfect not to much info but just the amount we needed! Excellent job
And he even explained why other ways aren't the proper way without dragging it on. He even even threw in some bits about his own company without taking much time away! That last part alone eats up 2-5min for other videos. Nice, quick, easy, to the point, and even managed to throw in some mentions of his business in a straightforward video. AND the video angles were great!
Solid video! I just followed it and it worked flawlessly! I bought some really nice ball bearing roller for $25. Now garage doesn’t make noises!
Very professional, expertise, clarity, and brevity!!!
Thank you for a "no-nonsense" process. I followed your instructions to replace the rollers and now my garage door opens/closes with almost no grinding noise! I also did put a squirt of WD40 on both brass pulleys on either side top of the doors to remove the squeal. Great video !!
That bottom roller trick worked awesome 👌. Thanks!
Excellent video and glad you called out the hacks and naysayers. Watched a video before this where the guy bent the heck out of the track and didn't unplug the opener
Excellent review of the basics, thanks. I like the shout-out approval of the rooster.
I. Watching so I can replace the rollers on my garage door. I’m hoping no brackets are broken. This video was very helpful
Replaced all rollers by taking off brackets and used your method for the bottom roller. Thanks
This video is great and helped me out in replacing all my rollers. Thanks for all the great info
Thoroughly explained, including trick of the trade. Only highly confident and highly skilled technicians can do it and I am very thankful.
Best video I've seen on this topic
Excellent DIY vid. Wow, insulated garage door, dry-wall, air unit, Flat panel TV, large red LCD clock... Was really hoping you'd turn the camera around and pan inside the rest of that awesome looking man-cave.
Just subscribed because of the last roller installation
thanks for a sensible easy to understand how to video
I was one bolt away from taking off the bottom hinge... lol Thanks for the video!
Oh dang! Good save!
Fantastic! Thanks so much. I think I am going to replace all the hardware this weekend.
Thank you. Had a roller pop out. Never knew you could bend the track. Saved me a lot of $
This was such a great video - THANK YOU!! I truly appreciated the safety advice and the "why we don't take short-cuts" explanation.
Nice job! Helped my neighbor with her garage door and you guys are my guides, really easy instructions!
Great guide and explanations on the how to do it properly. Thanks for taking the time.
Thank you for putting this video together!! I was able to replace my 10 rollers in probably 10 minutes.
This is a clear and concise tutorial, though I'm not sure what the special professional tools are that he refers to at the beginning. Other than the track-straightening tool he shows in passing near the end, every tool the presenter uses to perform the "hinges and rollers replacement" the video title refers to are ordinary tools any homeowner can get or may already have. Anyway, thanks!
I believe he was referring to winding rods for the springs that were not shown in the video
I just had a mini split installed in my garage. How would I ajust the bottom roller to close a gap between the door and the weather stripping? Awesome Video!
Great video with easy explanations as to how to do things and why to do it that way.....really good stuff!
Loved it! Great job explaining all that useful information. I wish I had the training certificate for this type of job. $$$$$$.
Worked perfectly like oiu showed.
Thank you to explain how to do the correct way.
Very helpful, very professional!
Thanks very much. You saved me a lot of time and the possibility of injuring myself
Well I can say I was going to try replace my rollers the other ways I've seen on RUclips but yours way seems the most efficient, great video
Thank you for taking the time to do this. I am not interested in fast, I want to do no harm, and you have truly given me the knowledge to do so.
Thank you thank you ! You saved me so much money 💴 💕💕💕
sooooo helpful!!! super easy to follow as a beginner DIYer
just wonderfully done if i had a garage need fixing i would hire you guys
❤ Really very helpful, like this a lot!!!
Good video, very professional
nice thank you for the clarity and good explanation of how to do this.
Just ordered those rollers.
that help my garage im fix my after im watching your video thank you
Thank you for this great tutorial and I really appreciate the do’s and don’ts
Excellent info!
Excellent demo very professional two tums up 👍👍
Excellent video very informative.
Followed you step by step. Flawless execution! Thank you!
Thank you for this video. Great insight.
Good job on this!
Easy to do it-nice video
Thank you. Great video. Excellent advise. Appreciate it.
Wonderful video! Made it easy.
Great job, thank you!
Thank you! very helpful.
Thank you for the details :) Job made easy.
Thanks guys, doing this during quarantine and don't have room for an error. This video was exactly what I needed to get the job done without a mistake.
you are the man! Thanks!
Great video!! Quick an easy
excellent video
Too bad I haven’t seen your video before starting my door rollers change.
Great instructions
tips are great with good advice. thanks for making this video
Great information 🤠
Great video and advise, thanks..
thanks for your sharing.
Superb
Well done
Great vid. Just replaced a #2 hinge and I have zero skill.
Thank You.
Thanks, good info.👍👍👍
Thank you
Thank you!!
Thank. .🍺👍👈
Excellent video, thx
Thanks!!!
Thank you. 👍👍