Ripclean makes the kit for those asking, comes with 25 or 50 ft water line…also comes with 10ft crush proof hose, QD’s, and high quality connections…I would recommend an extra QD for your hose hookup but overall great product
At least give the other youtubers the credit for already putting out this type of extractor hack video that they put hard work into producing and make it sound like your brand new idea!
Get a bucket heater and a pump sprayer. Snip the end of the sprayer tube before the want and connect to your water line. Heated water for the extractor. 🤙
Ripclean also has an adapter so you can hook it up to regular sinks, so you can use it in your home with hot water, plus using connected to as hose spigot etc.
Looks like it works well. For every 10°f that you raise your cleaning solution it increases the cleaning power effectiveness by 100%. So if you could take the supply off a hot tap she'll work much more efficiently.
It's good and bad. I feel like you have to have heat for stains and being mobile if you are using a tank you gotta try to use a transfer pump which I have found to be a pain
I’ve been using a Rigid 4 gallon for all my carpet and upholstery cleaning. I don’t have that clear tool like an extractor because I didn’t need it and one less tool to deal with. Ripclean sells a hose and attachment head at over $220.00. I’m on the fence with this overpriced item…
Regular water and heated water you didn’t notice a difference in the seats and carpet being cleaner ? Let us know what you bought and thank you I don’t want to spend 1200$ on a myte
I know a shop that converted their extractors to rip clean from Mytee’s because the Ripclean was so much more powerful hooked up to their 6.5 HP shop vacs.
As company entity you just pored chemical cleaners into the environment recorded it and then shared it on RUclips are you just trying to get fined/arrested by Environmental Services, at least poor it down a flaming drain.
Dudes about to have everyone under the sun wicking there interiors. First of all Mytee is junk and it’s way more powerful than that tiny shop vac. Second, why wouldn’t he at least buy the most powerful ridgid vacuum at the store with the 6.5 HP?? They are not much more in cost. I use an Optima steamer with the ridgid 6.5. These videos are hilariously terrible.
Ripclean makes the kit for those asking, comes with 25 or 50 ft water line…also comes with 10ft crush proof hose, QD’s, and high quality connections…I would recommend an extra QD for your hose hookup but overall great product
What is this QD you speak of ??
Quick Disconnect
@@JosephMobileDetailing ive always called them quick connects, unless theyre different things in which case nvm lol
Same thing, I've heard it both ways,.. proper way is "quick connect" but I'm not the grammar police either..
@@JosephMobileDetailing thats fair
I'd love a tutorial
We all would.
@@idkmateeCONVERT A SHOP VAC TO A PROFESSIONAL EXTRACTOR
Would love to see you do an review on the ammo steam vac, maybe an loaner, they are like $2,000+
Lmao, we can all tell you bought one and are now trying to justify it
@@dominicstephens781 😂
You just wasted $2,000+ pal
you just wasted your money 🤣🤣🤣
Please post a video of how to build an extractor out of a shop vac.
At least give the other youtubers the credit for already putting out this type of extractor hack video that they put hard work into producing and make it sound like your brand new idea!
@HawaiiDetailing
You should make a video step by step where to buy it. How to attach it to the ridgid vacuum and leave the links bro.. nice job.
Built Mike this week costs around 500
Can you please post the link to buy the thing that turns it into an extractor ? I’ve been wanting to clean my car for ages
That Ridgid vac does have impressive suction!
Let’s see the damn thing 😮
Would love to see a full build. Having issue with what connectors and hose for the sprayer to get and no one shows their build
Been thinking of this for a while too
Great job!
we have a ridged shop vac and they are great. P.S it is about 20 years old.
How did you turn your vacuum into an extractor can you show please
Me again 😅 a link and maybe what the peak hp of your ridgid vacuum is ?
You need the Ryobi drill with 8 inch brush the smaller ones are slow .
Hook your hose to the drain on your hot water heater. Thanks for the info. What filter?
I'm a little surprised that you let am error in the captioning get through (host - hose). Keep up the good content but don't let quality slide!
Im surprised that you let an error go by when you said, "am error."
I'm just messing with you, dude. It's all good!😅
I have the exact same shop vac. A tutorial would be awesome.
Get a bucket heater and a pump sprayer. Snip the end of the sprayer tube before the want and connect to your water line. Heated water for the extractor. 🤙
Where does the water source come from? Did you put on a water tank? Or hose is just connected to a water source?
Dude. You're the best! Details ???
Look up rip clean on youtube
Ripclean also has an adapter so you can hook it up to regular sinks, so you can use it in your home with hot water, plus using connected to as hose spigot etc.
Looks like it works well.
For every 10°f that you raise your cleaning solution it increases the cleaning power effectiveness by 100%. So if you could take the supply off a hot tap she'll work much more efficiently.
If you really wanted/needed hot water you can hook your hose up to your home water heater. Probably wanna turn the temperature down tho
It's good and bad. I feel like you have to have heat for stains and being mobile if you are using a tank you gotta try to use a transfer pump which I have found to be a pain
you reckon an ozito one would be suitable if an aftermarket suction head is attached? based in Australia 👍
Anything with good sustainable sucking power is worth keeping around
1. This is incredible
2. This is incredible with extra steps
Nice, it cheaper and best suction from shop vacuum. What soap do you use sprayer on the car’s seat?
Where do you get the extractor hamdle
I’ve been using a Rigid 4 gallon for all my carpet and upholstery cleaning. I don’t have that clear tool like an extractor because I didn’t need it and one less tool to deal with. Ripclean sells a hose and attachment head at over $220.00. I’m on the fence with this overpriced item…
Just need to know how you adjusted the Drill w/brush to avoid that kickback...
A water heater stinger can heat a 5 gallon tank just as fast if you do that diy mod.
Do you vacuum then extract or does it do what the vacuum does too
Regular water and heated water you didn’t notice a difference in the seats and carpet being cleaner ? Let us know what you bought and thank you I don’t want to spend 1200$ on a myte
Ya, this is just the same but without the steam.
I know a shop that converted their extractors to rip clean from Mytee’s because the Ripclean was so much more powerful hooked up to their 6.5 HP shop vacs.
Hell yeah!
I made one to man I love it
Tutorial Please please olease
Set up list?
Important question does it need defoamer??
Is a 4hp shop vac good enough?
How much hp is the vac to see if I could do the same?
Hi Luke. Do you know how to adapt this extractor “to the beast” vacmaster 5 gallons Vaccum? Does the same kit for the Ridgid fit on it?
I like my little hoover tho. I'm not a professional and don't care to be, so it works great for me. $120, can't beat it.
I made my own extractor as well lol
Yes you would be able to. Tell the difference. #1 THE TIME SPENT. #2 The amount of stains that come out.
I DID THE SAME THING!!!
Can add pressure washer in this system?
How do the seats dry after you vacuum them
How much is the extractor?
I have a 6.0 peak HP shop vac that has 12amps, i want to do this but dont know how.
👌👌
Show how you built it. I’m curious 👀
im trying to figure out how to put a heating element to my aqua pro vac
Wouldn't you wanna start with the seat back and then do the bottom?
Now. Hook it up one your hot water out put then you get heat 🔥 🤷🏽♂️🤷🏽♂️ smarty
Might do this with my rigid 12 gallon that things got like a 5hp motor on it💀
Maybe pour the water on a lighter colored surface so we can see the dirty water better. That's the money shot.
Can we get a video how you did it?
Show us how to build one
Details on product?
Just buy the RIGID water filter instead of the dust filter...
As a european it hurts watching americans just pour away so many chemicals into plants and grass
EPA enters the chat 😂
Where do u get the attachments to turn the ridged into a extractors
Amazon for sure
It comes with the Ripclean kit.
could you attach to a hot water in the garage just for this
Yes. You can hook it straight up to your hot water heater or even a regular sink.
Gonna teach us how?
Making it difficult for no reason just get a mytee8070.
Dang.
Bro really copied Hawaii detailing😂
Yeah man! Not even a shout out….! He actually tried to make this a “new” idea
Hoping you used eco safe cleaning agents for that pourout....
Hook it up to hot water, da
What you need is a pressure washer to clean that dirty concrete you are pouring that dirty water on to.
EPA will be at your door
As company entity you just pored chemical cleaners into the environment recorded it and then shared it on RUclips are you just trying to get fined/arrested by Environmental Services, at least poor it down a flaming drain.
Dudes about to have everyone under the sun wicking there interiors. First of all Mytee is junk and it’s way more powerful than that tiny shop vac. Second, why wouldn’t he at least buy the most powerful ridgid vacuum at the store with the 6.5 HP?? They are not much more in cost. I use an Optima steamer with the ridgid 6.5. These videos are hilariously terrible.
BS
Why dont you start with the back part and then the seat part?
I have the same shop vac! If you don’t have the 14foot auto detailing hose you should definitely get one!
@HawaiiDetailing
Aqua pro vac
You know dummy, if you hooked the hose up to the hot water heater you would have a hot water extractor