3 CHEAP And EASY Cosmetic Interior Modifications Under $100 | 6th Gen Camaro | 2016-2022 Camaro
HTML-код
- Опубликовано: 31 июл 2024
- This video shows 3 simple, cheap, and easy cosmetic interior modifications for your 6th Gen Camaro! We show the products, initial thoughts about the products, how to install, before/after looks, and what we think of them after they are in place. They do add some color to the interior, but we will have to see if they last. Not too bad for buying 3 products for under $100. If you would like to know if these products held up over the years, feel free to leave a comment down below and I will let you know!
Did they hold up to the test of time?!?! Click here to find out!
• Red Carbon Fiber Cosme...
Save 20% off + FREE Shipping at @Manscaped with promo code "CAMARO" at Manscaped.com and make a donation to @tcsociety to help save a life.
mnscpd.com/sinister
Visit manscaped.com/TCS to learn how to "Check Yo' Self" for early signs of cancer.
Visit www.Manscaped.com to learn more about how you can support testicular cancer awareness, or make a donation to Testicular Cancer Society today to save lives (and balls!)
** DISCLAIMER: Found out after I posted this video that the 2 vent rings which didn't fit right were different depths. When I swapped them, they fit PERFECT. Please, ignore my comments about the air vent rings in this video. The rings come with no instructions and it wasn't until I looked at the reviews that I discovered they are different. Make note of this when you go to install them on yours. **
List of products shown in this video:
CupHolderHero Inserts (9 piece set)
amzn.to/2PFk9in
4 Piece Red Air Vent Cover Rings
amzn.to/3cB01a5
High Flying 2 piece Steering Wheel Paddle Shifters
amzn.to/39umT9n
Chapters
Intro - 0:00
Products - 0:54
Manscaped/TCS - 3:43
CupHolderHero Inserts - 6:44
4 Piece Red Air Vent Cover Rings - 10:00
High Flying 2 piece Steering Wheel Paddle Shifters - 12:30
Review - 15:17
Outro - 16:33
If you found this video, chances are this channel is made for you! Come hangout and chat with us while we update you on the progress made on the channel. Around here we #respectallbuilds so don't be shy about the car you own. It can be a V6, 2.0T, V10, Honda Civic, squatted truck, etc. Your style is what you want it to be. Glad to have you here and hope you stay a while to help make this channel great!
Promo Codes:
MobbMotorsports - use code "SinisterCamaro"
Vertical Doors Inc - use code "SinisterCamaro"
AutoLedTech - use code "SIN10"
Manscaped - use code "CAMARO"
Titled Nation Gaming - tiltednation.com/discount/SIN...
Get 20% OFF + Free International Shipping @manscaped with link Manscaped.com/SINISTER
STAY SINISTER! 🤘
--------------------------------------------------------------
Subscribe: Main Channel
▶ bit.ly/TheSinisterCamaroRUclips
--------------------------------------------------------------
--------------------------------------------------------------
Follow/Subscribe: Twitch Account
▶ twitch.tv\The_Sinister_Camaro
--------------------------------------------------------------
--------------------------------------------------------------
Follow: Instagram
▶ / the_sinister_camaro
--------------------------------------------------------------
--------------------------------------------------------------
Join our Discord Channel:
▶ / discord
--------------------------------------------------------------
Don't forget to:
▶ Like
▶ Comment
▶ Subscribe
▶ Share
Use these tags to find me on other platforms:
▶ #Chevrolet
▶ #Camaro6
▶ #SinisterCamaro
Follow me here:
▶ Website: TheSinisterCamaro.com
▶ Instagram: / the_sinister_camaro
▶ Facebook: / thesinistercamaro
▶ Merch: www.thesinistercamaro.com/onl...
Pick up some Sinister Camaro gear!
▶ Send your pictures to me of you wearing the gear for a feature on my other socials above!
Want to Collab in the future? E-Mail me!
▶ TheSinisterCamaro@gmail.com
- Support this channel by using this link to buy ANYTHING on Amazon.com! (Link can be used multiple times and activates for 24 hours.) Feel free to share this link with friends/family.
Thank you in advance! amzn.to/34tzNTr
My New Camera Setup:
Canon EOS M50 Bundle - amzn.to/3gEfu80
Extra Batteries - amzn.to/3b6MDbq
DJI Ronin-S - amzn.to/3jlC9rC
Rode DeadCat - amzn.to/3lutyVm
Rode VideoMic - amzn.to/34V6CZR
My Old Camera Setup:
Canon G7x Markii Bundle - amzn.to/2QFke2F
Extra Battery - amzn.to/3jprNHa
GoPro Camera:
GoPro Hero 7 Black - amzn.to/2Qv4Ypg
Extras:
Neewer Ring Light - amzn.to/3jl3qun
Neewer Box Light Bundle - amzn.to/32zfGka
Camara Tripod - amzn.to/2YIKeyQ
Joby GorillaPod - amzn.to/34JySOO
GoPro Bundle - amzn.to/3hGXo6I
GoPro Suction Mount - amzn.to/3hR9Jpj
Lavalier Lapel Mic - amzn.to/376RgAO Авто/Мото
Save 20% off + FREE Shipping at @Manscaped with promo code "CAMARO" at Manscaped.com and make a donation to @tcsociety to help save a life.
mnscpd.com/sinister
*** DISCLAIMER: Found out after I posted this video that the 2 vent rings which didn't fit right were different depths. When I swapped them, they fit PERFECT. Please, ignore my comments about the air vent rings in this video. The rings come with no instructions and it wasn't until I looked at the reviews that I discovered they are different. Make note of this when you go to install them on yours. ***
Chapters
Intro - 0:00
Products - 0:54
Manscaped/TCS - 3:43
CupHolderHero Inserts - 6:44
4 Piece Red Air Vent Cover Rings - 10:00
High Flying 2 piece Steering Wheel Paddle Shifters - 12:30
Review - 15:17
Outro - 16:33
Did these hold up? Find out here!
ruclips.net/video/8KAenqkU5lE/видео.html
Lol i have the rubber pieces in my truck haha
They are not too bad, they look good, but idk how it will be in the long run. I do love the center console and cup holder stuff 🤘🏻
I heated mine up with a heat gun and that made the adhesive adhere better.
Just a quick note on the vent rings. They should come labeled as 2 small and 2 large size. The large go on the outside vents by the doors. Also a little heat will help the adhesive to bond.
They did not come like that for me. Just a plain box and package well to save the rings from getting damaged. I did see a number 3 on a couple of them, but I didn't realize they were different sizes until AFTER I posted the video 🤦🏼♂️ I put that in the disclaimer in the description and top comment. Thanks for this. Maybe next time, I'll run it by you before I attempt. Glad to have you hear for things like this
I have all three of those mods. I was a little worried about the vent rings and paddle shifter covers staying on, but 4 months later everything still looks great. Looks good with red seatbelts.
Nice! Awesome to hear. They might be ok after all. 🤘🏻
I have the paddle shifters and they have held up fine, been in car for a year now. Great video.
Thanks! They seem to still be on there tight. They actually look really cool. Thanks!
Did you happen to see the comment I left on the stream video? Hope it helps with your questions.
It really spruces the interior up!
I'm still on the fence about it, but they are still ok so that's a plus! 😂
The rings are different sizes, mine came in small and medium, the outer rings are slightly larger. I did the same thing you so I had to switch out the two that didn't seem to fit.
You are right! I found that out after I posted the video 😂 my luck. When I removed them a few months later, they were really on there, so no worries about them coming off once they are on. 🤘🏻
Anyone know if there is a green version of the kits they sell for all the interior accessories? Or should I buy them and get them wrapped?
I searched around and see they have red, blue, black, white, and Yellow for the cup holder package. Cupholderhero has green for a Kia I see, but not Camaro.
Found these in green for the vents.
www.ebay.com/itm/20X-Green-ABS-Interior-Air-Vent-Outlet-Cover-Trim-for-Chevrolet-Camaro-2016-2019-/382933213322?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
I found some green paddle shifters on eBay and this site
store.ijdmtoy.com/products/accessories-gadgets-aa3733-green
Looks like you might have to wrap/paint the rings around the vent covers. Depending on wrap material, it might be too thick to wrap around the edges though without it peeling back up or interfering with the tape on the back.
Hope this info helps.
@@thesinistercamaro appreciate it boss
How’d the air vent rings hold up?
Still great! I actually went to take them off the other day as I made a new video that I need to post where I upgraded them to the red carbon rings. I had to take a heat gun and burn my hands a couple times to get these off, so once they are on for a couple days, they will REALLY be on. Hope this helps! Thanks for checking out the video
How did the products hold up ? Checking in almost a year later lol
No problem! They held on very well! I recently removed them to put on some red carbon instead and it took a heat gun to get the rings off and goo gone to get the little bit of residue off the vents. Other than that, they work great! No damage to the vents at all is you decide to remove them.
Where did you get your floormats
They came with the car. I ordered the premium floor mats when I ordered the car.
i would put 3m double-sided tape on the bottom of the cup holders, i bought them and put drinks and it would stick to the bottom of the drinks and i would throw out the drinks and it would stick to the bottom.
I didn't think about that until I did the same thing. Now I can't find one of them because of that. 😂 Thanks for the tip as it could save others from the same fate!
@@thesinistercamaro in a way it's a good thing for me cause i bought the white lined ones and then realized that i wanted my cars accent color to be red.. so looks like i'm buying new ones😂
😂 at least it's super cheap!
Can you tell me what seats are those? thanks
No problem. They are the stock Recaro seats that come in the car.
@@thesinistercamaro Dang that was fast, thanks! So did you keep any of the mods that you used here? And how are they holding up?
Haha I'm working from home so it's much easier to get to comments. I have lost one of the cup holder circles (got stuck to a cup and I can't find it now). The vent rings are still on with no issues. Extended Paddle shifters are still on with no issues.
Are those seat cover?
These are the stock seats that come in the ZL1. No seat covers in this car 😎
Are these reliable ? I want a 5.0 MT but these have grown on me lol
Honestly, I came from a 5th gen SS with heads/cam. Difference in power is amazing! Love the interior on the ZL1. However, I will say I did have one major issue when I first got the car. Ordered the car new, car arrived at dealer, Signed the papers, walk out of the dealer with 5 miles on the car, and lifter failure (common issue for a lot of GMs new around the time but mainly the C8s). Dealer Replaced all of the springs, lifters, etc. Less than a week later I got it. After the car was broken in easy, I got into it a few times and it's a blast. Then, I got a check engine light about a month or two ago. Brought to dealer and they cleared it but couldn't get the knock sensor to repeat the issue, so I took it back. They said maybe it's a glitch and I got into it to bring it up (I was easy on it all day that day it happened). Ever since then, no issues at all. Lots of fun. Lots of oem pops and crackles. Looks like nothing on the road and people ask all kinds of questions about it. Wing, canards, and supercharger since not many people get ZL1s it seems in my area.
One more thing, I hear the 17-18 ZL1s have oil pump issues. I believe there was a recall for them to get fixed, but if people don't it could wreck the motor. 19s and up don't have that issue from what I am told.
So, are they still on there?
They were until I took a heat gun to them and took them off to install some red carbon fiber rings. These were not coming off at all. They were on so good I thought I was going to rip the vents out of the car 😅
What Henderson are you in? Nevada, NC, or Texas
NC
@@thesinistercamaro dope I’m from Texas love your car bro subbed
Thanks so much! Hope to make it down there one day. Got a few friends down there to show me how the slab game works. 🤘🏻
@@thesinistercamaro niceee. Quick question do you have any performance mods on your car?
On the ZL1, not yet. Trying to get the big cosmetics done and ceramic coating on the car first. Been planning for a year and it's about to get decked out. Then, I will be chasing 1000hp+ on it.
Ull rip em off the ac vents lol
I'm thinking the heat will get to them and they will fall off. They fit really good though.
(Shifts fast) oh shit
I mean it does especially compared to the SS. It's instant 😎
First
First after me home skillet 😂
@@thesinistercamaro gotta work
Work? Never heard of it 😂