Ive never been a fan of the "stick on" carbon accessories. They never really look right, and I think a tiny bit of carbon goes way further than a LOT of carbon. .02
I did pretty much the same. I didn’t get the door trim yet. I think you should do black on the passenger side because you have the red vent. I don’t know how red would look.It might look great.Great add ons ✊
Looks great!! I bought a new 23 Challenger two months ago. Before I bought it I was making a list of all the things I wanted to do to it. I was originally going to only spend about $200 on carbon for the inside. Now I've spent $1,100 on interior carbon alone, not counting the carbon in the engine bay or the aftermarket flat bottom carbon steering wheel. I am happy to say I bought every piece I could justify.
I’m not a fan of the chrome accents inside the car, therefore looking for a “chrome delete” solution and I find this video quite inspiring… carbon fiber it’s cool and looks good too! 😜
Keep up the good content brotha, I have a ZLS aswell I’ve been watching ya for like 4 years and felt super inspired to build my Camaro once I got it. I also live in Arizona!!
Did you have any fitment issues with your stuff? I've purchased a few real carbon things from Carbon Add-Ons, Next-Gen as well as directly from China. Both CA & NG had fitment issues where edges had to be sanded down to clear the buttons, one piece I had to send back because it just would have required too much work to fix. Funny enough all my carbon parts from China fit perfectly, to a tee
yes no issues on these.. the only one that i wanna say made the buttons a little stuff was the radio bezel. the knob is fine but i felt like the button were a little stiffer to push down. other than that.. everything else, lined up pretty well. i wouldn’t say it’s perfect because it’s a molding on top and not a full replaced the parts. but overall it’s definitely a nice touch.
@@CamaroZLS Thanks for the reply. It is pretty amazing how well these fit as overlays, some of the best fitting I've purchased for any vehicle for most part. Thanks!
After all Superman came from a different planet and needed to traverse space to get to Earth so those stars would make sense🤷🏻♂️ plus EL wire is an easy DYI. Some headliners can do shooting stars or symbols too
Bro all of those parts are 3m glued there! send me those parts and ill make them fully forged or what ever carbon you want, i do 100% full carbon or overlays but what ever you choose comes out 1000 times better than those parts that are just 3m tho your parts.i do everything by hand and ship all over.
Niceee!! I got those AC vent covers too in blue carbon fiber to match my paddle shifters! I have the dash in regular carbon! I just got the mirror caps too! @carbonaddons
How do you guys like the new carbon setup?
A little ricey…
Carbon fiber is jjust not my thing
Ay is tht door trim with the light only for zl1?
Ive never been a fan of the "stick on" carbon accessories. They never really look right, and I think a tiny bit of carbon goes way further than a LOT of carbon. .02
@@noclandevon absolutely 💯
I did pretty much the same. I didn’t get the door trim yet. I think you should do black on the passenger side because you have the red vent. I don’t know how red would look.It might look great.Great add ons ✊
Looks great!! I bought a new 23 Challenger two months ago. Before I bought it I was making a list of all the things I wanted to do to it. I was originally going to only spend about $200 on carbon for the inside. Now I've spent $1,100 on interior carbon alone, not counting the carbon in the engine bay or the aftermarket flat bottom carbon steering wheel. I am happy to say I bought every piece I could justify.
Superman is coming along great👌🏽🔥 cant wait to see how he turns out
I’m not a fan of the chrome accents inside the car, therefore looking for a “chrome delete” solution and I find this video quite inspiring… carbon fiber it’s cool and looks good too! 😜
Keep up the good content brotha, I have a ZLS aswell I’ve been watching ya for like 4 years and felt super inspired to build my Camaro once I got it. I also live in Arizona!!
Can you send the link for the website for the carbon fiber
Hi, I was wondering if the spectrum lighting is still visible around the radio after installing the cover?
The red Stitching goes well with the red carbon!!!
Lookin good!
thx fam! see you this weekend
Looks great brother. I will definitely be getting this set up on mine.
Did you have any fitment issues with your stuff? I've purchased a few real carbon things from Carbon Add-Ons, Next-Gen as well as directly from China. Both CA & NG had fitment issues where edges had to be sanded down to clear the buttons, one piece I had to send back because it just would have required too much work to fix. Funny enough all my carbon parts from China fit perfectly, to a tee
yes no issues on these.. the only one that i wanna say made the buttons a little stuff was the radio bezel. the knob is fine but i felt like the button were a little stiffer to push down. other than that.. everything else, lined up pretty well. i wouldn’t say it’s perfect because it’s a molding on top and not a full replaced the parts. but overall it’s definitely a nice touch.
@@CamaroZLS Thanks for the reply. It is pretty amazing how well these fit as overlays, some of the best fitting I've purchased for any vehicle for most part. Thanks!
Where do I get that car cover
I'd get a ZL1 Badge on the dash passenger side, Great Job
Please don't do this, badge on dash is tacky IMO......something I'd done back in early 2000s.
Chevy gang for the new year 👍
you know it bro! 🤘
they sponsored you and great pieces 🔥🔥
Thanks for this video
🙌
They nowgot the peice the covers the chrome on the dash
Looks nice bro! I like it.
thank you bro, love the username.. they are making a movie for snake coming soon. can’t wait! i also hope they make a pc game also.
I would line all the panels with EL wire and do starlit headliners
i like that idea.. i have it in optimus. definitely thought about the headliner.
After all Superman came from a different planet and needed to traverse space to get to Earth so those stars would make sense🤷🏻♂️ plus EL wire is an easy DYI. Some headliners can do shooting stars or symbols too
@@JacobSmith-rh2sr dude i honestly never looked at it like that.. i seriously am thinking about it more now. thank you!
@@CamaroZLS hell yeah I'll be looking out for that video when you upload it 👌🏻🦸💪🏻
Beautiful.
how come you dont do racing videos or track videos? I feels this channel is only hey look what i installed but you cars are always not moving.
i was actually recently invited to a track days with some other camaros. i didn’t announce it yet until i was actually there but now you know 😉
🔥
thx brotha 🤜🤛
Bro all of those parts are 3m glued there! send me those parts and ill make them fully forged or what ever carbon you want, i do 100% full carbon or overlays but what ever you choose comes out 1000 times better than those parts that are just 3m tho your parts.i do everything by hand and ship all over.
Honestly, i prefer it default, there's too much carbon in there(personal opinion)
How you getting free shit ..lol I've had to pay out the ass for it .. actually did 2 Camaro. Let me in bro ..
i have 3.8 million followers on tiktok bro and 114k on ig. so that can help out quite a bit.
Alot of Carb(on) will make you fat!! You need to reduce your Carb(on) intake. Too much of a good thing is potentially very bad!!
Niceee!! I got those AC vent covers too in blue carbon fiber to match my paddle shifters! I have the dash in regular carbon! I just got the mirror caps too! @carbonaddons