Nice rig build 👍can you set-up the quad cortex tuner to display on an rjm Mastermind GT? I know with the axe fx you can display the axe fx tuner on the masterminds display. I think they call it tuner over midi.
Unfortunately, at this time, the QC does not have the necessary MIDI functionality for the MMGT to display its' tuner. We have a bunch of options for running tuners with these racked, though. We should have a video coming out showing these optons within a month.
@@BTPA_USAyeah sweet as. How would you go about switching between 2 seymour duncans power amps running into one 4 x12 cab one to act as a backup running with the 2 quad cortexs
@@mikefalcon85 Most people doing this are just using the duncan units as stage volume/monitor. Due to this they end up just hot swapping the cable on the back of a rack. There aren't a whole ton of options on the market that will switch the speaker signal as an A/B. There is a Radial Engineering unit that can switch speaker signal A/B; however it is not designed for solid state amps, like the Duncan.
The lock? We custom made them for the rack. Not something that can really be bought as it has to be retro-fitting to match the rack hole then installed after the shelf is installed to the rack
Nice rig build 👍can you set-up the quad cortex tuner to display on an rjm Mastermind GT? I know with the axe fx you can display the axe fx tuner on the masterminds display. I think they call it tuner over midi.
Unfortunately, at this time, the QC does not have the necessary MIDI functionality for the MMGT to display its' tuner. We have a bunch of options for running tuners with these racked, though. We should have a video coming out showing these optons within a month.
@@BTPA_USAyeah sweet as. How would you go about switching between 2 seymour duncans power amps running into one 4 x12 cab one to act as a backup running with the 2 quad cortexs
@@mikefalcon85 Most people doing this are just using the duncan units as stage volume/monitor. Due to this they end up just hot swapping the cable on the back of a rack. There aren't a whole ton of options on the market that will switch the speaker signal as an A/B. There is a Radial Engineering unit that can switch speaker signal A/B; however it is not designed for solid state amps, like the Duncan.
@@BTPA_USA no worries mate thanks for the reply I must do some research tben🤔
Can this rig also be used with a RJM mini effects gizmo and a RJM Mastermind GT-10 or GT-16?
Yep!
Hi, where can I buy the safer (0:59min) from Rack-Drawer? Thx
The lock? We custom made them for the rack. Not something that can really be bought as it has to be retro-fitting to match the rack hole then installed after the shelf is installed to the rack
Any tips on how to build one lock like that one?
honestly, the lock for the rack shelf was sick and id buy them if available as well