Replace Audi tail light bulb, 2007 A4 Cabriolet
HTML-код
- Опубликовано: 25 авг 2024
- Here, I will replace the driver's side tail light bulb in a 2007 Audi A4 convertible. The lamp and bulb replacement process is different in this model from the sedan.
For more helpful videos generally covering push button start issues and warning lights, check out our channel here on RUclips or go to DashboardSymbols.com.
And if you see the "Thanks" button below the video and we were able to help, please lend your support to our efforts.
#Audi #TailLight
----------------------------------------------------------------------
Remember that only proper service and repair procedures will ensure the safe and reliable operation of your car. In addition, proper safety procedures and precautions, such as the use of safety goggles, the right tools and the equipment should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
These posts are for information sharing purposes only, and should not be used in lieu of an OEM service manual or factory authorized service procedure. We are not in the auto repair business nor do we publish automotive service manuals. Nothing we include on these pages and posts has been reviewed, approved or authorized by any vehicle manufacturer.
Technology is always changing and what is current and accurate today may be literally out-of-date and inaccurate tomorrow. And when it comes to the current state of flux in the auto industry, nothing is more true. 
Авто/Мото
I was struggling looking at different a4s and then I see yours and I literally gave it a soft smack and bare got the sucker out thank you for your video
Nice one, got the screw out but couldn't get the housing out till I saw your video, that gentle forwarded tap did the business! :)
Glad to help...
I really appreciate your response and information. I’m going to buy a screw extractor bit, but I will be very careful to try snd not break the taillight. Damn, if the screw wasn’t rounded out , this would be so easy because of your excellent video. I also have the convertible so I will buy the replacement bulb 2825 that you mention. Thanks again for your reply and information . It is very much appreciated!
My pleasure!
Hey thanks pal, this is a great help.
That's the plan...
Dann your video is the best instructions ever #1 thank goodness for your help you rock
Glad to help...
Great video. Really appreciate it.
Glad to help...
Thank you!
Glad its still helpful...
Thank you that was easy!
Glad to help...
Thank u
You're welcome...
Any tips for the tail light bulbs beneath the brake bulb?
Never had to replace one (and no longer have the car). However, it should be easy enough to get at once the assembly is removed. Likely just a twist to take out...
perfect instructions thanks a lot
Great. Glad to help.
Great video but my screw just spins and won't come out, any idea on how to get it out?
Not supposed to come out. It just backs away enough to slide the lamp out sideways...
Hi, so the screw in my 2008 Audi A4 is rounded out. Any idea how to get it out and get a replacement screw? I did the other rear light exactly as you describe and although that screw was "a little bit" rounded I still was able to grip the screw to turn it. Thanks so much and I hope you answer!! Best, Christine
Ok, so if I understand correctly, its the screw head that's rounded, meaning a screwdriver won't grip it. So, first, the screw is built into the taillight, so removing and replacing it is not possible. Better off at a wrecking yard looking for a used t-light. However, you'd still have to remove it, so search for something called an "easy out". It should turn the screw and maybe there's enough forward grip to tighten it after the bulb is replaced. Or, wrecking yard. Good luck!
@@DashboardSymbols hi, it’s been awhile but I wanted to tell you that I got the screw out and was able to replace the side rear light bulb. The Philip’s head of the screw was dug out/rounded out so the screwdriver was not gripping the screw. I tried a few dumb ideas that didn’t work. But, just this morning, I thought of using a ratchet and it worked! Actually, the first size ratchet I tried fit perfectly and turned the screw! Hallelujah - I was able to complete all the other steps you indicated and I replaced the bulb. Thanks Christine
@@christinemastorides6344 Well good thinking and good work! Hopefully there were no tickets in the last three months...
I have a 2008 Audi A4 quattro convertible and I purchased the tailight. I don't have the inner plastic cover where the screw is hidden nor the screws or bolts to hold the tailight into place so it won't come off. What do I really need to attach the tailight so it won't fall off? What's the actual name for the black plastic inner cover piece?
What do I need to buy to keep the tailight from falling off like my previous tailight.
Hey... U shud find what you need here (www.audiusaparts.com/v-2008-audi-a4--cabriolet--2-0l-l4-gas/electrical--tail-lamps). If not on the page, the guys at the store are VERY helpful, and they discount! I no longer have the Audi, but used them several time. Good luck!!