So I had one of these, way back. Mine was even the same color. It was a 67 with covered headlights, It had a backwards running Fiat 1324 cc 124 motor driving into the stock fiat transaxle with an abarth bell housing. It used the stock fuel tank, and had a radiator mounted about where yours is. It also had moveable aerodynamic devices, the hood opened at speed and lifted about 3" (at the rear of course) and the air going through the radiator vented out the open hood. Great car. I called it "animal" . One day the car split in half as I get home, and I decided to sell the drivetrain for big profit!
Cool to turn a rear-engined car into a mid-engine. One of the knocks on the Miura is the changing weight distribution from decreasing front mass as fuel is consumed.
I’m so glad to see you back on your channel! I’m glad to see Walter too! You’re a great fabricator too Jared, as I have told you before. Yes, I’m enjoying this build. Keep up the good work!
My only criticism is that the radiator box coming out the front does look a little wonky. Would it be possible to trim it back to match the shape of the front end?
Wow looks great love your videos . Any concern about hot air expelled from the radiator and heat soak for fuel in the tank BTW what is the radiator from ?
Nice result, should be fairly balanced even if the fuel tank is ahead of the front wheels. Are you putting foam in the tank to mitigate sloshing or is it baffled?
In your lifetime you never heard or understood the word Halfassed, because nothing you fab is anything but total practicality and tastefulness.
So I had one of these, way back. Mine was even the same color. It was a 67 with covered headlights, It had a backwards running Fiat 1324 cc 124 motor driving into the stock fiat transaxle with an abarth bell housing. It used the stock fuel tank, and had a radiator mounted about where yours is. It also had moveable aerodynamic devices, the hood opened at speed and lifted about 3" (at the rear of course) and the air going through the radiator vented out the open hood. Great car. I called it "animal" . One day the car split in half as I get home, and I decided to sell the drivetrain for big profit!
Lovely work. It'll be handy enough for Walter to drive when it's ready!
Great work - I was in your neighborhood (off Seamount) helping an owner of a very original 1970 Fiat 124 Spider get his car running again.
Great progress! Great video, made even better with a Walter sighting!!!!
I quit fabricating a few years ago. You do a great job. Just insulate the radiator with rubber. It will last way longer.
As always your work is impeccable. I so enjoy watching you fabricate your ideas into reality. Your channel is my favorite on all of RUclips!
That is going to be the most fun to drive…. Just brilliant
Nice work, the inlet for the radiator would have looked better if the outside with the mesh would follow the curves of the front valance in my eyes
Cool to turn a rear-engined car into a mid-engine. One of the knocks on the Miura is the changing weight distribution from decreasing front mass as fuel is consumed.
Excellent!! Glad to see you back, if only on a limited basis. Aloha!
Good to see you Walter! Thanks for the video Jared!
I’m going to try this on my 60 beetle build
Welcome back and thank you for another awesome video! Also nice to see Walter again👍🙏🙋♂️
Love your projects man!!
Awesome! Love your work and vids. Majorly talented guy. Can't go wrong with Walter as your shop manager.
I really love your vids, hang around PLEASE.
Great to see another video from you and Walter!
You are so talented. I love your enthusiasm. Keep doing the good work 👍
Wow; that’s a whole lot of progress since the last time! And Walter’s ever so sweet! 🐶🥰
Very nicely done sir, can’t wait to see the end result.
Great build
Thank you for another great video.
Great work..coming very good so far..👍👍👍
Your skills are amazing!
Beautiful work, as always! 👍🏻 Good to see Walter again. My dog doesn‘t visit me in the garage, he is scared of loud noises.
Coming along nicely!
凄い！
いつも日本から応援しています‼︎
Remarkable work and progress, as always. Thanks!
This really has been a fun one to watch. Can't wait to see it running down the road.
Looks great man! Hey, post once a month if that works better for you. Enjoy the video's. Best regards
So glad to see this update. That engineering and perfect fit is fabulously.👏🏻👏🏻👏🏻👏🏻
I’m so glad to see you back on your channel! I’m glad to see Walter too! You’re a great fabricator too Jared, as I have told you before. Yes, I’m enjoying this build. Keep up the good work!
Very cool! I’m happy!
Jerod, you never cease to amaze me by your fabrication work. Excellent as always! Looking forward to your future videos.
Looking great!
Great to see you back in the workshop, content is always excellent and to excellent build quality my favorite RUclips builder.
Very well done. I always enjoy watching your videos and I hope you have some other new projects planned in the future like this one! 👍👍
Yay!
More build videos!
I always enjoy, and learn from, your videos.
Thanks, and a big WOOF to Walter.
My only criticism is that the radiator box coming out the front does look a little wonky. Would it be possible to trim it back to match the shape of the front end?
I'm sorry, don't agree. I think it enhances the shape of the car. No offence!
Walter!
TRABAJO NIVEL DIOS😍💪💪💪💪👍👍👍👍👍👍👏👏👏👏👏👏👏
Wow looks great love your videos . Any concern about hot air expelled from the radiator and heat soak for fuel in the tank BTW what is the radiator from ?
It’s from an ATV. Heat is a concern, I can make a heat shield if necessary
Nice result, should be fairly balanced even if the fuel tank is ahead of the front wheels. Are you putting foam in the tank to mitigate sloshing or is it baffled?
The tank came with foam in it👍
What about a thermo fan?
💖
👍😎👍
👍👍✌️
I just got Walter white 🤦
We actually just named him Walter because we thought it fit his personality… but a lot of people have asked us if it’s because he’s white.