You are professional you putted the lcd exactly in it place if you see the black small line from the top , bottom and sides you know what I mean. Keep going. Thanks for sharing this
Nice video, I bought a similar kit from a different provider as yours as run out of supply. Same good quality glue is provided too. I am going to have to be patient changing this screen for sure. I am up to the challenge. Thanks for your tips. Cheers from France.
Hey, great video, i am more confident i can do it myself after seeing how you used all of the tools. By the way, great trick using the tape to protect the screen from getting any LOCA inside!
Good tutorial. Pay attention to the order of the ribbon wire harnesses- I had to take the home button back off to fold two of the harnesses under it so they stacked right to hook back up to their ports. And this takes more than 15 mins! The vid is sped up! And you will screw stuff up if it's your first time. Just be sure to put screw and plates down on a paper towel or something so they won't roll around. You can do it!
Impressive, Where did you buy that adhesive and tape to put between the lcd and glass. I was just fumbling around with an old screen I had recently replaced, seeing how to get those apart, after completely destroying the lcd I went to this video haha. well done my friend.
4:46 I messed up on this step, I separated the LCD from the touch and glass, the touch glass and the connector broke and the hole touch glass is broken. What should I do? buy the entire LCD+touch+glass? thanks
are those complete screen replacements good, as in do they have good lcd, coz they cost like 5 bucks more compared to getting all this parts and all that work. weighing this two options
Hey what's up its Taleb and I am wondering if I can use fishing line instead of that wire you are using? If not, any other suggestions other than that?
+Xiao Mobile LCD repair solution Skype: amy_6421 Amy is there anything I can use besides professional cutting wire? Any suggestions? Thank you in advanced
I want to purchase the replacement screen for my iPhone 6. I don't want to attempt screen only. Can you advise me what to buy and the address for your site?
Trying to do this now expanding my knowledge on fixing iPhones. But the wire method I find extremely hard and have not got it to work. It could be that my wire is too thin because it’s impossible to hold like that. Just cuts into the skin.
Very cool tutorial, (even your voice is calming) :-) . I guess I just don't have the guts to do this on my own.. guess I'll pay to have someone do it.. :-(
The issues with error 53 and TouchID not working is only if you break your home button. But it's not really an issue anymore as Apple removed that error in a update.
Hi. I have a question regarding to a iphone 6 glass digitizer replacement . Can someone please recommend me where to purchase excess glue removing kit that remove’s the old glue from the actual screen it’s self ?
I went to get mine fixed and two hours later (I didn't go to apple) I got it and they told me to turn it on in 20 minutes so,I did but,when I got home 20 minutes later I tuned it on and the frame wasn't lined up with the LCD and the screen was glitching PLUS the home button fell out. Isn't that wonderful? WONDERFUL!!
ItZz JoK3rZz It might dry without the light, using natural UV but that would take days for it to cure, so probbaly not the best idea. I would spend the couple bucks on a light
Tell me if you please my dear, I was stuck in the middle of the right screw and I can not lift large iron plate, what to do in this case? Renovated encounter for the first time, I am now trying to change the screen looking at his steps your priceless vidio.
Thank you answer me, I stuck a screw and did not want to get out, but this problem has been solved, Alilluya! Happy New Year my dear and good luck in everything.
Mona Ty The glue dries very fast and is sensitive to light we have packaged them now in UV safe bottles and that is not an issue anymore but thanks for wondering and I hope we can help fix your phone
i have a question , i replaced my iphone 6 screen cause it was cracked but im wondering if i put a glass screen protector, would it do any hardm to the new replaced screen?
Once a new replacement screen or glass repair has been done, it is highly recommended to fit a tempered glass to give the protection and more prevention of a reoccurring break.
I am trying to order screen replacement bundle but I discover iPhone 6s plus is not on the list. can you help . I need new glass and frame together with bundle tools ...thanks
John man the 6s plus bundle won't be in stock until next week we ran out of bezel frames if you'd like to place the order for a 6s and leave a note so when available we can ship thank you
Hi, just dropped my iphone 6 plus and it got a few cracks on the glass. Dose anyone know any inexpensive place in or near San Francisco where I can have the glass replaced? Thanks!
Hi brother I have a smashed screen where the front camera and speaker is also not available. What do i do? And before buying the products is there any way to know if the board is all fine like if i buy the screeen n come to knw that the phone is not turning on Thanks
+ErCellutions no its not showing up anything. Can i put another iphone 6 screen n home button front camera and see if it works? Wud the home button of another phone give any issue while turning on the phone? Thanks Jerin
+ErCellutions thank you for helping :) i tried turning the phone on with another iphone 6 screen n its not turning on, which IC shall i check on the logic board?
That was by far the best tutorial i've seen so far
yes,good job
You are professional you putted the lcd exactly in it place if you see the black small line from the top , bottom and sides you know what I mean. Keep going. Thanks for sharing this
Thank you. The best tutorial I've seen, I like how you used simple tricks from home environment. I feel I can do it!
Nice video, I bought a similar kit from a different provider as yours as run out of supply. Same good quality glue is provided too. I am going to have to be patient changing this screen for sure. I am up to the challenge. Thanks for your tips. Cheers from France.
Hey, great video, i am more confident i can do it myself after seeing how you used all of the tools. By the way, great trick using the tape to protect the screen from getting any LOCA inside!
Great! I have never thought about putting scotch tape on LCD 3 edges. Thnx for your great idea, and your hard work.
Awesome video, I would not attempt this unless you watch this young mans video !! Perfection
Wow..., this is why I take it into a cell phone repair shop..... Had it done within 30 minutes - perfectly....
Feeling BRAVE after this one!!! Im going for it 💪🏾😎
How did it turn out ?
Dennis Simmons ofcourse she buys a new phone lol
@@arjayyt5875😂
Could you please tell me the exact loca glue you're using here? Thanks a lot!
Excellent tutorial 👍🏽!!..You just made screen repairs much easier for me!
Thanks man! Using tape to prevent the glue from touching the backlight is a good tip!
Great home diy tutorial. Keep up the good work sir 🙏🏼
Thank you so much for this video. Much appreciated. This will help once my screen comes in.
Thank you for this great video. Question: If I buy parts from your site, how do I find out how long it takes for them to arrive?
Good tutorial. Pay attention to the order of the ribbon wire harnesses- I had to take the home button back off to fold two of the harnesses under it so they stacked right to hook back up to their ports. And this takes more than 15 mins! The vid is sped up! And you will screw stuff up if it's your first time. Just be sure to put screw and plates down on a paper towel or something so they won't roll around. You can do it!
With this method do you save the ear speaker, home button, and the front camera?
Does anyone know where I can order the glass screen and the tools from in the UK
where is your amazon link? for iphone 6 glass repair kit?
Thanks bro.. really helped out alot more than the others
Impressive, Where did you buy that adhesive and tape to put between the lcd and glass. I was just fumbling around with an old screen I had recently replaced, seeing how to get those apart, after completely destroying the lcd I went to this video haha. well done my friend.
The video was sped up this could take a long time as you have to scrub out the glue carefully to make sure there is no residue.
Why dont you buy the glass panel from the start glued with the bezel? Is it harder to glue if it comes like this? I didnt found them separatly
Great vid, any suggestions if you damage the inner LCD removing the glass!
Noel McKeown buy a new LCD
what kind of string did you use? Can I use fishing string to do it? It is not metal string as you mentioned in the clip
I practised on a damaged screen first and totally cooked!! This was an excellent video for mugs like me 🤤
4:46 I messed up on this step, I separated the LCD from the touch and glass, the touch glass and the connector broke and the hole touch glass is broken. What should I do? buy the entire LCD+touch+glass? thanks
are those complete screen replacements good, as in do they have good lcd, coz they cost like 5 bucks more compared to getting all this parts and all that work. weighing this two options
So I have a question. If there is still cracks like on the real lcd after I take out the glass. Does the loca glue like cover them?
if cracks you mean scratches yes the loca glue will fill in - cracks like lines on the lcd no
Hi do you guys ship to the uk? Do you have a shop in the uk Amazon Store?
Can I use this same tutorial for an iPhone 7?
i would like to buy the complete kits for iPhone 6s plus. thanks
There in the description below
I need the replacement screen for iphone 6s plus model A1634? Can you send me the link to oder it on amazon , thanks
when you were scraping the glue off the lcd screen with the razor blade, it would not scratch or mess up the lcd screen?
Would it be okay to use a glass with a preinstalled bezel or frame ?
If I don’t have the wire that you used to separate the lcd from the glass screen, can I use fishing line?
Could I replace some of the Iphones 6s Plus parts from an Iphone 6s????? Like Screen, Front Camera, etc.
Well done mate. Good job
Can I use the black case to replace the white one? I don't see the white case on ur site for 6s plus
Hey what's up its Taleb and I am wondering if I can use fishing line instead of that wire you are using? If not, any other suggestions other than that?
+Xiao Mobile LCD repair solution Skype: amy_6421 Amy is there anything I can use besides professional cutting wire? Any suggestions? Thank you in advanced
Taleb Shehadeh the wire is a couple of dollars for 150ft
In this video you can change only the white panel and replaced that old lcd display?????
Hello there im looking to have my digitiser repaired can you recommend me any company out there?
I want to purchase the replacement screen for my iPhone 6. I don't want to attempt screen only. Can you advise me what to buy and the address for your site?
Trying to do this now expanding my knowledge on fixing iPhones. But the wire method I find extremely hard and have not got it to work. It could be that my wire is too thin because it’s impossible to hold like that. Just cuts into the skin.
Great tutorial,well done mate!!!
Cut at 10:37 to use real UV light to cure glue.
Do you ship to South Africa?
How much should it cost approximately for 6s if done from a repair shop ?
Very cool tutorial, (even your voice is calming) :-) . I guess I just don't have the guts to do this on my own.. guess I'll pay to have someone do it.. :-(
Thanks for the video. After this, it gave me confidence to start doing glass only repairs! 👍🏽👌🏽
Don't do its its not worth it
+Ronald Sanpierto I know, but I'll do it with screens that are already broken and are mine. Maybe I can use a few.
+Jose Luis Actually, it's worth it. I wouldn't recommend to do this if you don't feel prepared or you're not skilled with your hands.
So i can attempt to do this for $10 and retain retina screen, but not worth it? Your opinion is not valid
Will touch id work after the repair, I have read it might not work after some repairs?
It will 100% still work
The issues with error 53 and TouchID not working is only if you break your home button. But it's not really an issue anymore as Apple removed that error in a update.
Hi. I have a question regarding to a iphone 6 glass digitizer replacement . Can someone please recommend me where to purchase excess glue removing kit that remove’s the old glue from the actual screen it’s self ?
Hi can you send me the link for the glass digitiser plz
I have question why you just dont remove backlight and after you put loca glue and do the job with uv light , then you add backlight again to screen ?
I went to get mine fixed and two hours later (I didn't go to apple) I got it and they told me to turn it on in 20 minutes so,I did but,when I got home 20 minutes later I tuned it on and the frame wasn't lined up with the LCD and the screen was glitching PLUS the home button fell out. Isn't that wonderful? WONDERFUL!!
oh you make it look easy! great job. But those are some small screws. I will leave it to the experts.
Do you have to use the flashlight or can you use something else?
It's a UV flash light. I suppose you could just leave it out to dry in the sun for a half hour.
Hey so does the iPhone 6 screen fit on iphone 6s? if not because frames I can change the frame
Will the glue dry without using the uv? And if so how long would it take?
ItZz JoK3rZz It might dry without the light, using natural UV but that would take days for it to cure, so probbaly not the best idea. I would spend the couple bucks on a light
No it won’t
how did you heat up the loca glue (before you put it on) I was reading the reviews on amazon and it seems like people had issues with heating it
Do you have another video for the 6s or is it the same thing?
lol
noob
Nico Benline wtf?
like seriously??? ahhahaha
Lmfao
Excellent video!!
Real nice job man, great tutorial 👍
You don’t have international shipping,do you?
What kind of glue do you use and what kind of flashlight is that?
loca glue and a uv light
Can you ship this product in India, if I purchase through your website?
Tell me if you please my dear, I was stuck in the middle of the right screw and I can not lift large iron plate, what to do in this case? Renovated encounter for the first time, I am now trying to change the screen looking at his steps your priceless vidio.
Victoria Martinov I'm a little confused what is it that you are stuck on exactly ?
Thank you answer me, I stuck a screw and did not want to get out, but this problem has been solved, Alilluya! Happy New Year my dear and good luck in everything.
Question: Does this method works on Iphone6s plus Clone(android)
That means I get a new one for my birthday!
would an iphone 6s glass work on an iphone 6? just the glass, not digitizer or lcd
That is the best video! Thank you!
Where you have purchased screen glass
How is the torch that you use called?
Which laser tourch is that can I purchase it
So all of your (iPhone screens) was purchased on Amazon website correct ? Which site is more legit ... thank you
Omg thank u so much like I bought one but no fram I getting my money back n buying from yall
:l i bought it just now and it failed to tell me when my shipment will arrive... Um can anyone tell me on how long it took theirs to arrive??
Do I need to purchase a polarizer?
Just realized mid phone repair that my kit didn't come with an iPhone bezel frame, would I be able to reuse the old one?
if it isn't damaged u can do it.
why would you start something like this without watching the whole video jesus christ
anybody know if the iphone 7plus and the 6plus use the same front glass? i need to repair an iphone 7 cracked glass.
i I ship you my iphone 6s plus, will you be able to fix it?
I’m getting too much anxiety doing this on my own... how much should this repair cost? (Service)
should be around £40
Great video. Thanks for the pointers!!
hello can I ask where can I buy a lcd of zte blade s6 my phone is also a blade s6 and the screen now had a damage and I want to change it to.
Ok from the revues on amazon, looks like the glue comes shipped all jelly or dried up.....y'all fix that issue before I order?
Mona Ty The glue dries very fast and is sensitive to light we have packaged them now in UV safe bottles and that is not an issue anymore but thanks for wondering and I hope we can help fix your phone
I have a question.how long does your shipping take ??
3-5 business days
+ErCellutions okay.we're do I get my tracking number ??
+ErCellutions or we're do I find it ??
+Tech Boy click the description for site to purchase
+ErCellutionsI purchased already. I just haven't found my tracking number
Is it the same to the 6s plus mines crack so hard dont want to spend money on fake repair shops here in Philippines.
u used fishing line?? u could teach a few pros lol iused to do that on car windows
i have a question , i replaced my iphone 6 screen cause it was cracked but im wondering if i put a glass screen protector, would it do any hardm to the new replaced screen?
Ervin Sanchez nope not at all
Once a new replacement screen or glass repair has been done, it is highly recommended to fit a tempered glass to give the protection and more prevention of a reoccurring break.
It will be fine if not better! I definitely recommend using the tempered glass to add that extra layer of glass to reinforce the screen's protection.
Florida Forged I lol
Hi you tubers any body on here have a iphone 6 for parts. Hit me up
Why take it all apart? seems the glass could be removed without taking it apart?
Or is the heat harmful to the rest of the phone?
JIm McIntosh it's easier to take the glass off if it's separated from the rest of the phone
I am trying to order screen replacement bundle but I discover iPhone 6s plus is not on the list. can you help . I need new glass and frame together with bundle tools ...thanks
John man the 6s plus bundle won't be in stock until next week we ran out of bezel frames if you'd like to place the order for a 6s and leave a note so when available we can ship thank you
Sorry not a apple owner but a friend's phone is in need of the same repair. Is the process the same for Iphone 6 plus?
Yes
Mazee Africa
brilliant, have a iphone 6 which is completely dead how do I go about it thanks
1. Check the battery
2. Check for a short circuit of the logic board
3. Check the display
4. check the dock connector
then you will know.
I checked the terminals on the board and its showing dead short what can it be IC's or capacitors, its a new battery
Hold the power button for ten secconds and then hold the power button and home button for another 10 secconds. I hope that helped.
Hi, just dropped my iphone 6 plus and it got a few cracks on the glass.
Dose anyone know any inexpensive place in or near San Francisco where I can have the glass replaced? Thanks!
Nice Work , tape is a exelent tip .
Thank you so much. Your awesome. I will be buying all of my parts from you from now on
Jesse Wills
P
how about if the glass is broken and so the lcd? is it easier to repair? thankyou
much easier, you can skip after 2:25
Hi brother
I have a smashed screen where the front camera and speaker is also not available. What do i do? And before buying the products is there any way to know if the board is all fine like if i buy the screeen n come to knw that the phone is not turning on
Thanks
+ErCellutions no its not showing up anything. Can i put another iphone 6 screen n home button front camera and see if it works? Wud the home button of another phone give any issue while turning on the phone?
Thanks
Jerin
+jerin john no home button won't matter
+ErCellutions thank you for helping :) i tried turning the phone on with another iphone 6 screen n its not turning on, which IC shall i check on the logic board?
IC of Iphone 6 Is available? if Yes, what will be the cost>>>> plz help me>>>