did anyone think that between 5:27 - 5:45 looks easier then it really is? GREAT VIDEO THO WITH PERFECT SPEED INTRUCTIONS AND DETAIL! others are too quick or the instructions aren't as proper. you got my thumbs up! I will mark this video and save it for when my i6 screen arrives.
Anonymous Canada Out of all the steps that one seemed to take me the longest, the rest wasn’t all that bad. Besides doing battery replacement with adhesive that doesn’t want to play nice but that is a different story.
This is by far, the best replacement video on youtube. Unlike the others, you can actually see what is done during crucial steps (like the camera installation). Thanks!
@@itsbansheebish6016 if you know what you’re doing and have an interest in tech you should be ok, just respect what you’re working on and treat it like your a surgeon.
Any ideas or suggestions on why the screen would flicker consistently after the screen is replaced? I did all of the these steps . I even unplugged the battery let it sit for half hour and double checked my connections. Everything works , the speaker, home button, and camera , but the screen keeps freaking out.
So I'm trying to fix my iPhone 6. Do I remove it and do the same things you did? Do I have to buy a new iPhone 6 screen and then follow the things u did or do I just have to do it again with my broken one?
Sun.bun_ Yeah I'm pretty sure you replace it with a new one. otherwise you'd just be taking it off and putting it back on and the damages would still be there.
ive swapped a iphone 6s screen and display that was broken and replaced it with one from another 6s that had other issues. but the screen is completely blank. the old screen displayed half the screen at least
Great video! Fixed my broken screen first try. Hardest part was to figure out how the camera cable went back in but now I’m confident about doing this fix again.
If the touch sensor still works, just hold down the button for five to six seconds and turn it off, if your not sure whether or not the touchscreens working but you mic and speaker still work, hold down siri and say "what is 0÷0". this is a pretty long joke so while she's saying it, touch the bottom inch of your screen, if she stops, then the touch senor works, if not try a few more times, if it still doesn't stop, then you touchscreen doesn't work. If this is the case, read Markus B (right above mine) and do what he says.
Thank you so much. I just got done replacing my screen and it works perfectly. I noticed that some people commented that their touch ID stopped working but I don't have that problem. I wasn't quite able to follow the instructions when you were putting the camera back in place but I watched another RUclips video on how to do that and I got it. Great instructions besides that. Thanks!
nahhh, it definitely won't work. apple has this thing called the home button no screen change disorder which stops you from using the same button, so #dab #lit
i´ve just replaced my wife´s iphone 6 screen. Before closing the screen I tried everything was working perfectly, the only thing that wasn´t working was the touch id (i didn´t know how to fix it and it was not so important so i left it that way), I even tried if the proximity sensor was working and it worked so I turned it off and finish putting everything together but when I turned it on i realized the proximity sensor was not working. Do you know how can i fix those issues? i think I was very careful and didn´t break a thing
yeah i'm sure i even took the it apart 2 more times and tried reconnecting it, still didn't work. yeah i might have to take it to a shop. thanks anyways for the help
I replaced mine every think is ok but the screen is foggy with vertical blue lines and bit of flickering which goes off after few minutes. Anybody got any clue ?
i suggest getting a new rubber gasket because you'd lose the adhesiveness of the gasket if you re-use the old rubber gasket and the home button will be less flushed on the screen
Damn me again for breaking yet another phone screen!! Two weeks after the new 3G rolled out I stepped into the hot tub with it in my pocket, I've been steadily screwing up iPhones ever since! Dammit.
The best part about going to replace your screen at the mall or a store is, if they have a defective screen which means it won't work, they will put another screen for just one charge. On the other hand, if you buy your screen from eBay or Amazon that screen may be defective and you'd have to wait another week or so.
Can somone give me a definitive answer on the touch id? I had to replace both the digitizer and lcd and the touch id is no longer working. Is it likely that this is fixable or did the fact that I added a non-oem dig/lcd prevent its use?
i mean when its sometimes black and green because of the cracks. it only happens in some places of the screen and it shows when the phone is turned on.
Sir, can you please tell me that in YU Yuphoria dispay has broken and sowing multi colors but touch working so what comes in this phone whole folder or only disply? if i want to change only disply what can i do? Please answer.
I fucking hate the fact every fucking person says. It's just like Legos when you're plugging in the connectors to the fucking goddamn screen, and I've been trying to fucking connect the stupid shit. For the past 6 hours, and I'm at the point of fucking raging and breaking shit
did anyone think that between 5:27 - 5:45 looks easier then it really is?
GREAT VIDEO THO WITH PERFECT SPEED INTRUCTIONS AND DETAIL! others are too quick or the instructions aren't as proper.
you got my thumbs up!
I will mark this video and save it for when my i6 screen arrives.
Anonymous Canada Out of all the steps that one seemed to take me the longest, the rest wasn’t all that bad. Besides doing battery replacement with adhesive that doesn’t want to play nice but that is a different story.
This is by far, the best replacement video on youtube. Unlike the others, you can actually see what is done during crucial steps (like the camera installation). Thanks!
T
ruclips.net/video/w0ganzJBolc/видео.html
how about this one?😅
It works! I am soo happy. The touch Id works, the camera works everything is perfectly fine. Plus, the video was really helpful. Thank you so much ;)
Did you get scared you would ruin your phone?? I’m tempted to change mine by myself but I’m too scared to
Was your display also broken?
@@itsbansheebish6016 if you know what you’re doing and have an interest in tech you should be ok, just respect what you’re working on and treat it like your a surgeon.
Huh I thought when you remove LCD the battery should go first but when you finally install it the battery is the last and the lcd is the first
Any ideas or suggestions on why the screen would flicker consistently after the screen is replaced? I did all of the these steps . I even unplugged the battery let it sit for half hour and double checked my connections. Everything works , the speaker, home button, and camera , but the screen keeps freaking out.
I tried per this video and repaired my broken screen... thank you
So I'm trying to fix my iPhone 6. Do I remove it and do the same things you did? Do I have to buy a new iPhone 6 screen and then follow the things u did or do I just have to do it again with my broken one?
Sun.bun_ Yeah I'm pretty sure you replace it with a new one. otherwise you'd just be taking it off and putting it back on and the damages would still be there.
Samantha Arroyo true true
ive swapped a iphone 6s screen and display that was broken and replaced it with one from another 6s that had other issues. but the screen is completely blank. the old screen displayed half the screen at least
Great video! Fixed my broken screen first try. Hardest part was to figure out how the camera cable went back in but now I’m confident about doing this fix again.
All you need is broke another one
if you have a different home button that comes with the whole screen assembly and apply it to a different iphone will the touch ID work
Robel Kahsaie no
Recently My dad broke his lcd screen so I was gonna fix it myself but my dad was like “nuh uh, that’s technology, we don’t fuck with technology” 😂
Excellent instructions and unlike other uTube videos you can see every step! Thanks mate you've have saved me dollars!
Thanks for watching.
How are we suppsed to know if the phone is off if the schreen wont show anything???
Take off battery cover and disconnect it from the board.
If the touch sensor still works, just hold down the button for five to six seconds and turn it off, if your not sure whether or not the touchscreens working but you mic and speaker still work, hold down siri and say "what is 0÷0". this is a pretty long joke so while she's saying it, touch the bottom inch of your screen, if she stops, then the touch senor works, if not try a few more times, if it still doesn't stop, then you touchscreen doesn't work. If this is the case, read Markus B (right above mine) and do what he says.
Open the battery cover and the the top cable pull out gently and there you go amigo
Nice work, please how can I get to buy iPhone screens
Is there anyway I can order a screen without ordering online
Thank you so much. I just got done replacing my screen and it works perfectly. I noticed that some people commented that their touch ID stopped working but I don't have that problem. I wasn't quite able to follow the instructions when you were putting the camera back in place but I watched another RUclips video on how to do that and I got it. Great instructions besides that. Thanks!
Perfect speed, perfect quality video. Thank you
It is very helpful tnk yuh so much sirr
Will the same home button work on a new iphone 6 screen
Yes keeping the original home button will allow touch id to still function on a new display.
nahhh, it definitely won't work. apple has this thing called the home button no screen change disorder which stops you from using the same button, so #dab #lit
My screen doesn’t have major cracks or anything, but it wont show anything, just a black screen. Since i cant power it off, what will happen?
same 😢 now i still gotta bring mine to the nearest repair center…
Brief And Useful !
For step no. 8 - two of the screws can't seem to come out at all. Any suggestions? Thank you!
i have the same problem but with 4 of them
same for me right now...
I did with one. I used a similar star bit only from a different tool kit. fit better and the screw came out.
Do i have to do it that way or can i just replace the whole thing like screen camera and all or do i need to do it this way
if you get the iphone screen with small parts off their website, you don't have to do all the extra stuff. you can just pop it right on
i´ve just replaced my wife´s iphone 6 screen. Before closing the screen I
tried everything was working perfectly, the only thing that wasn´t
working was the touch id (i didn´t know how to fix it and it was not so
important so i left it that way), I even tried if the proximity sensor
was working and it worked so I turned it off and finish putting
everything together but when I turned it on i realized the proximity
sensor was not working. Do you know how can i fix those issues? i think I
was very careful and didn´t break a thing
Playtech I do
you probably replaced the new home button with the old one. no replacable home button works with toutch id.
I need help after I replace LCD screen iPhone 6 they not working only vertical blue line after few seconds they’ll set off
This is the best tutorial I've seen so far. Very clear very straightforward. Count me as your new subscriber. Cheers!
thank you sooo much i followed all the instructions and best part no talking
if i get a screen lcd and home button from another iphone 6. will my touch id fix?
Xellos Metallium no you have to use the touch id from your old phone
Thank you so much really helpful video
Glad it helped
Thanks a Million!
did this with a screen i bought off ebay touch id stopped working. if i swap lcd and home button off another iphone will it fix the touch id?
Soy u need to keep the original home button any others wont work
it still has the original button i didn't mess with that i only swapped screens cos mine was broken. after screen swap touch id stopped working
Soy damn, i dont know about that. are you sure you put the connectors on right? try taking it to a repair shop see what they say
yeah i'm sure i even took the it apart 2 more times and tried reconnecting it, still didn't work. yeah i might have to take it to a shop. thanks anyways for the help
I replaced mine every think is ok but the screen is foggy with vertical blue lines and bit of flickering which goes off after few minutes. Anybody got any clue ?
Great video! Did it myself with no problems
Very very nice boss
i suggest getting a new rubber gasket because you'd lose the adhesiveness of the gasket if you re-use the old rubber gasket and the home button will be less flushed on the screen
Give it an hour to sense and it will start workin.
What is that black double sided sticker you guys send in your packages?
It is double sided adhesive.
Repairs Universe yes
Repairs Universe what's it for?
Thanks a lot you saved me $90
I'm attempting this myself and so far 3 screws stripped on me!!! what do you do for that?
Same
Learn not to strip screws
Jerry Jackson lol!
Tara Remington ask your rich dad to buy you an iPhone 8
Thanks for the video. I could change my mother's ip6 screen 😂 but i couldnt make the touch id work.
Thanks so much ...
Damn me again for breaking yet another phone screen!! Two weeks after the new 3G rolled out I stepped into the hot tub with it in my pocket, I've been steadily screwing up iPhones ever since! Dammit.
The best part about going to replace your screen at the mall or a store is, if they have a defective screen which means it won't work, they will put another screen for just one charge. On the other hand, if you buy your screen from eBay or Amazon that screen may be defective and you'd have to wait another week or so.
are all screws inside the phone the same or no?
Leonard Jacob no you have to keep them organized and put them back where you got them from
The answer is no. two screws are longer than the rest and must be replaced in the exact place.
great work
the screws on the metal bracket dont screw back in. what do i do now. they are the correct ones.
Great video men its save my money :D
Thanks
i love your video
Is no one else having a problem getting the camera back in? Is it supposed to snap back into place?
it did not snap into place for me. It took some careful maneuvering to get it to stay in place.
Can somone give me a definitive answer on the touch id? I had to replace both the digitizer and lcd and the touch id is no longer working. Is it likely that this is fixable or did the fact that I added a non-oem dig/lcd prevent its use?
Derrick Stewart unless you get it fixed by Apple the touch ID will not work.The home button needs to be from apple not another company.
Will this work if the phone screen it black
why wouldent it work im sorry but that is a stupid asf question
i mean when its sometimes black and green because of the cracks. it only happens in some places of the screen and it shows when the phone is turned on.
sorry i made it sound pretty stupid
Sir, can you please tell me that in YU Yuphoria dispay has broken and sowing multi colors but touch working so what comes in this phone whole folder or only disply? if i want to change only disply what can i do?
Please answer.
it worked great thank you :)
Glad it helped
Thank you so much
Did u do it?
thanks sir
Great video....thank you.
good
has anyone ordered from thhem . if you did was it a scam
cool music
one if the screws are seized and went come off so fuck my life
omg so my touch id won't work? wtf
I fucking hate the fact every fucking person says. It's just like Legos when you're plugging in the connectors to the fucking goddamn screen, and I've been trying to fucking connect the stupid shit. For the past 6 hours, and I'm at the point of fucking raging and breaking shit
เปลี่ยนด้วยตนเองได้ดูยูทูปก่อนเข้าใจแล้วดูๆหลายรอบเข้าชัดเจนแล้วจึงถอดเครื่องเปลี่ยนแบตเตอรี่ด้วยตัวเองได้จริงครับเปลี่ยนจอใหม่เสร็จแล้วครับ
👍
Supar video
It didn't work, I followed every single step, and now my phone is dead
oops
Paulina leyton cornejo its at ur own risk, + u are a girl.. hehe
Charge it
Paulina Leyton lmao
The only thing professional are the tools here :/ good tutorial for a screen replacement, but the methods are not the best (sorry for bad English ;( )
Jose Gallego how many people mess up your last name?
ควรแนะนำให้ถอดแบตเตอร์รี่ออกก่อนทุกครั้ง เพื่อป้องกันความเสียหายอื่นเพิ่มเติม