How to replace PCV Valve on CIVIC 2006-2011- the fast method

[@gCastTV]

Your tips of using a long flathead to place the washer, and using a paper towel to secure the PCV valve to the socket was VERY helpful. Appreciate you

[@basicdetail4512]

Thanks ! Im happy to see your appreciation my friend

[@choysum2508]

Sliding the washer along the screwdriver is a genius idea! Thanks for sharing this video!

[@basicdetail4512]

Thanks Brother ! I appreciate a lot

[@jrgeencnas267]

Merci bien George St Pierre. J’hésitais à faire ce travail mais maintenant avec ta vidéo, les choses sont bcp plus claires. Un coucou de Los Angeles

[@basicdetail4512]

Ahaahha ça ma fais super plaisir de te lire ! Passe une Bonne journée

[@chuckrafiki8649]

Thank you for having a light on the PCV valve! It makes it much more professional than some others on here!

[@basicdetail4512]

Thanks :) i appreciate m'y friend That was the exact goal of m'y video

[@mikethompson3534]

You don’t need to remove any shroud ,it’s a little tight with a deep socket but I was able to remove the Pcv valve just make sure you lube the hose inside with some wd40 for easier installation,also replace the gasket crush washer which is the same part number as the oil drain plug also use the factory Pcv as these valves are specifically calibrated for proper airflow instead of those autozone ,Oreileys Chinese parts

[@basicdetail4512]

Good job ! This area is very tight and good idea to lube the hose but I prefer use silicone spray with rubber hose... thanks for watching and sharing your experience

[@pgarza2]

Does it matter which way the washer goes? Round side up or down?

[@stevebutler7346]

THANK YOU VERY MUCH Great explaination and Tricks :::: Budgie from Bognor Regis UK

[@basicdetail4512]

Thanks for tell me about your location ! I always enjoy when I know where my video goes around the world ! That's make my day to know that you appreciate the video

[@red_ben3487]

good lord buddy... 4 12mm and 5 10mm bolts would have had that support out without needing to cut anything

[@basicdetail4512]

Ahahahah yeah I know my friend don't care about it 🤷‍♂️

[@dawkrb]

That ground wire is on borrowed time but good job!

[@basicdetail4512]

Thanks ! And Yeah he was shut lol i replaced it off cam

[@JuanLinares-h4v]

Muy bien explicado 👍

[@basicdetail4512]

Mucho gracias

[@asherdilber570]

Awesome video

[@basicdetail4512]

Thanks brother

[@carbuild_gear]

Did you any coolant loss

[@basicdetail4512]

Nope

[@jatinduggal-p5i]

👍👍👍👍👍

[@basicdetail4512]

Thanks brother !

[@totalnoobfishing1753]

This video brought to you by George St. Pierre

[@basicdetail4512]

Pouahahahha you are right brother ahahahah go watch the first 30 sec ruclips.net/video/QniCkVEUQ-Q/видео.html

[@phillyp.8375]

Or you could of took the few bolts out and removed the cowl support instead of cutting it 😂

[@basicdetail4512]

I know ! Laziness take it over us that day

[@NOAHCASAS]

😡👎🏼 @5:37 👎🏼😡

[@basicdetail4512]

Like i said you just have to remove the cowl if you got a nice car