How to Make an Entry Mudroom Built-In Part:1
HTML-код
- Опубликовано: 19 ноя 2024
- Check out our two-part series on how we created this entry mudroom built-in! Let us know what you think in the comments below. Thanks for watching!
Visit our Instagram: / stoiawooddesign
Tool List:
SawStop 3hp 52" Professional Cabinet Saw: amzn.to/3fVUKbv
ToolTech Line Boring Machine: amzn.to/30OhJRK
Bosch Miter Saw: amzn.to/3iDotYS
Makita Track Saw: amzn.to/3kEVFRy
Bora 4' x 8' 15 Strut Work Table: amzn.to/31KK5vx
Makita Drill and Impact Driver: amzn.to/2Fjy2xD
Rikon 10" Bandsaw: amzn.to/33StecF
Kreg Foreman:amzn.to/2PJLRY4
Ryobi Brad Nailer: amzn.to/3iwYYIz
Ryobi Pin Nailer: amzn.to/2PN34Qq
Festool ETS 125 REQ 5" Random Orbital Sander: amzn.to/30NpozI
Festool CLEANTEC CT 15 E Dust Extractor: amzn.to/2XU2QeN
Festool Domino Joiner DF 500 Q Set: amzn.to/33XJQQj
Festool Assorted Domino Kit: amzn.to/2DCTu09
Dewalt Planer: amzn.to/31Or62T
You killed it!! That looks so nice. It would actually gonna be fun to get your hat and coat in the morning.
Great job. Enjoyed the video and good luck with the new home
Thank you!
Beautiful!
Thank you!
This is very nice. I don't see how this is DIY though. The average Joe doesn't have all those neat tools you have.
While he does have some nice tool from what I gathered it can basically all be done with a circular saw, drill, a few clamps, and a kregg pocket hole jig. Sanding can be done by hand, painting can be done with a brush. All of those supplies can be bought for about $200. The wood might cost more than the tools.
Great work!
Thanks man!!
Great work! I would love to do this in my mudroom but I want to make sure I am efficient. Do you have an estimated material list you would use for a built in `80" W X 8' H?
Get some graph paper and plan!
Sorry for the brief audio issues!
What is the name and brand of the tool that drills the pocket holes? Very useful tool to have!
Thanks for watching! Kreg Pocket Hole Jig
@@stoiawooddesign Thank you!
Nice Build. He is right, bees don't usually hurt you.
Tip: before screwing the base corners together I 18ga them to Stay put
What was your length of screw for the pocket holes?
3/4" material uses 1 1/4" pocket screws. Thanks!
How did you conceal the visible pocket holes?
Thanks for watching! For the visible pocket holes connecting the top to the bottom, I used my pin nailer to attach a piece of 1/4” material the depth of the upper section. This covered all the holes and trimmed out the piece.
What paint did you use to paint this.
Thanks
Thanks for watching. I used Sherwin Williams emerald in pure white or extra white. Can’t remember exact color
I see that you have used plywood instead of 2×4. What is the best height we should cut the plywood for base frame assume that i would like to add molding finally
I make most of my built-in seats 18” to 20” in height. whatever total height you choose, make sure to take out 3.5 inches for the 2 x 4 base, as well as 3/4 inches for the plywood bottom. I believe this is what you are looking for. Let me know if you need any other help.
Did you use 1/2 inch plywood for everything? Compared to the plywood I have seen and used that looks like really nice plywood. I am building cubbies in my house and wanted to see what you used?
Thanks for watching! I used 3/4” maple plywood for this project. 3/4” burch would also be a nice options. Thanks!
@@stoiawooddesign thank you for the reply
Happy to help!
How did you attach the top of the bench? Screw it in or glue to those supports?
I attached by screwing through each horizontal support into the top. Thanks!
@@stoiawooddesign Was your face frame flush on the ton of the bottom cubby’s so the bench set flat on top? Also, does the front of the bench overhang the cubbies underneath or is it flush?
@@matthumphrey2304 Thanks for watching! Yes, the face frame was flush on the top so the bench sat flat. Yes, the bench top overhung the lower cubbies by 1" if I remember correctly.
What are dimensions of your face frame boards?
Do you have plans for this?
I do not unfortunately. I will be making plans for future projects though!
Which HVLP sprayer did you go with? Do you like it?
amzn.to/3u8djSf
Here’s a link to the sprayer I purchased. Very happy with the results!
Great thanks I’ll check it out! What did you cut the paint with? Last time I used a rented HVLP I cut the paint with water but it looks like you used some chemical.
@@cmac640 yes I used water as well as lay flat (paint extender). Just delays the drying time for a smoother finish. Thanks!
Thanks for the video. Making mine right now. What did you use for the bench top? Plywood with a routered edge pocket holed on or did you go with hardwood boards glued together and routered? Also what kind of stain and finish did you put on it?
Thanks for watching! I actually purchased two oak stair treads from Menards and glued them together. I then used varathane dark walnut stain and finished with a satin polyurethane.
As a contractor, how much would be a fair price to charge someone to build this built in? Including materials and labor.
Hey Jason - thanks for watching! I think a good starting point would be to find your material costs and then double it for a list price. That is how I started but have sense raised prices slightly as I have more experience with them. Thanks!
@@stoiawooddesign I charged $3k... Materials cost me less than $300... Just installed the bench today... Wish I had a way to show pics... Came out really nice... I used pine plywood and solid pine on the face frame... Only thing I did different was use dados for the bench cubbies... Size is 75 x 83
@@mrjasonbarnes that’s awesome to hear man! I’d say that is also right where I would charge. Shoot me an email at nstoia1991@gmail.com. Would love to see pics!
@@stoiawooddesign pictures sent... I also used an app to plan out my cuts... It took 3 - 4 x 8 3/4 sheets to cut everything needed for the project.
I need your table saw... Need to figure out a way to increase the size of my table for my existing saw
nice, but think about adding toe kicks, it just makes it easier when you are hanging up your coats. I hate kicking the base plate all the time.
Appreciate the feedback!
What kind of wood did u use for the face frame? Pine? And how much overhang do u have over the 3/4 inch plywood?
Thanks for watching. Yes, I used 1x2 select pine for the face frame. Regarding the overhang - what section are you referencing? Thanks!
@@stoiawooddesignthe face frame looks like it overhangs ur plywood base??
@@jimmidiggs 1x2 stock is actually 3/4 by 1 1/2. So the face frame members would be 3/8 overhang on each side of plywood.