The idea was that with the small rims these side by sides run, the wishbones had to be very close together, meaning they had to be extra strong as they had to endure a high buckling load. By moving the wishbones further apart the buckling load decreases and it seems like they did their homework, cuz it’s a beast.
The original design/patent has actually been around for many years, it's a great idea, Can-Am just dug it up and decided to put it to their own use. I WANT one!
So was the other can ams. Not a believer myself. But feel free to buy yours. What I did like, was the transmission. But they need to do some tweaks to the transmission as well. Stepping on the. Rake to go into reverse? Have you been watching Can Am?
Not saying I'm ready to buy one tomorrow but this was impressive, and looking to see how it performs overall. UTV Guide just took it through the Maze in Sand Hollow, I've heard its not that great crawling, I'll get behind the wheel of one soon but overall its growing on me, and curious to see how long the 4 seater will end up being. Their drivelines are exceptional so I assume this will be the same.
We saw you pulled off the road in Hurricane and just wanted to say hello and let you know we’re big fans. Thanks for posting good content! Hope you were ok?!?
You don't know anything until you find out for sure. Unless you personally inspected it afterwards, you just don't know and neither do I. Also, even if it did bend something, that's part of the game. You want performance? It's going to be a little more fragile. You want toughness? It's going to be heavier and slower. I'd say this machine strikes a pretty good balance between the two
That front end is insane by the looks at handling stuff but man it’s ugly. If I had the time money and resources I’d try to take the new motor out of the maverick and put it in an older x3 with like a blown motor. I just don’t like the looks of the new unit but hey I’m only in highschool r so that’s the dream
No matter how much money they pump into buying influencers to prop up this mistake, it’s going down as a blunder. Canam had so many options to knock the Pro R out of the water.
@ it doesn’t perform any better than the other regular x3s… and if that design were to be “superior” why hasn’t the industry adopted it? It was a gamble of a marketing scheme, that failed.
@ everything has a breaking point and I mean everything, even bullet proof vest. If hit just right.. as I said, if they were superior, you’d see them in Baja Trucks suspension. Let’s face it, Canam got lazy and that’s the best they could do.. like an IPhone getting a 4th camera lens 🤦🏿♂️
Notice how the entire suspension is actually changed...... pretty ignorant to speak on anything performance related as far as I'm concerned everything has been changed up its a fully custom race machine with ultra high clearance suspension components..... stock machine would not do this....
Lame!!!!! For the price of these stupid UTV'S you can build a rock crawler,truggy or sandrail that will eat this things lunch and never break. You're all outa line
Go do this and report back.... I can't understand people commenting on things they can't do/ wont do/ haven't done. Regardless of line choice he was top qualifier of the most prestigious event, which led to a win..... Why the hate?
@@ChupacabraOffroad I actually do these things...have for decades. Not one single person would pick that line willingly. He got lucky in that specific situation and the fact he didn't end his entire weekend in that moment is a miracle. Can't comment on the rest of the race.
@@s2pointoh KOH and ultra 4 are the only places you find ledges? No I haven't travelled 3000 miles to drop this specific ledge. You nut swingers are hilarious. He literally hit every big rock he could have in that clip. Funny, I didn't see the 4800 class smashing boulders head on....must be because they suck at driving right?
The actual results (in real life) say otherwise from KOH.... I'd suggest trying www.google.com before you comment.... please take your buffoonery to the crap youtube channels, this is for real offroaders...
That’s the funkiest double wishbone I’ve ever seen, but damn that thing is taking a beating.
The idea was that with the small rims these side by sides run, the wishbones had to be very close together, meaning they had to be extra strong as they had to endure a high buckling load. By moving the wishbones further apart the buckling load decreases and it seems like they did their homework, cuz it’s a beast.
Funnily enough some bmw suv are hiding a spindle and upper control arm like this
The original design/patent has actually been around for many years, it's a great idea, Can-Am just dug it up and decided to put it to their own use. I WANT one!
Doesn't even look like he picked a line...lol. Just go and blow. 💯💪
That's what I thought at first too, and if true that makes the car even more impressive IMO
Cash Lecroy talked him into just jumping it pre race
Wow! That's one sick unit
How you drive when all your parts are sponsored
Works very well , built tough apparently loved the slow mo
So was the other can ams. Not a believer myself. But feel free to buy yours. What I did like, was the transmission. But they need to do some tweaks to the transmission as well. Stepping on the. Rake to go into reverse? Have you been watching Can Am?
Not saying I'm ready to buy one tomorrow but this was impressive, and looking to see how it performs overall. UTV Guide just took it through the Maze in Sand Hollow, I've heard its not that great crawling, I'll get behind the wheel of one soon but overall its growing on me, and curious to see how long the 4 seater will end up being. Their drivelines are exceptional so I assume this will be the same.
Rzr guys be like oh man it just does more stuff….,
Kyle Chaney.., “hold my beer”
He was the big dog for sure at KOH
Watching this after the 4 seater was announced last week 😂
I’d pay to see someone try this in the 4 seater 😂
@ChupacabraOffroad only if there's 4 persons in there😅
Hell yea. I’ll sell my pro xp with HCR long arm kit the second CanAm releases the 4 seater
So impressive
We saw you pulled off the road in Hurricane and just wanted to say hello and let you know we’re big fans. Thanks for posting good content! Hope you were ok?!?
Ken Block helped design those Can-Am’s
No
Did he?
He has his full qualifying run on his channel
You can't tell me that thing isn't bent to hell and back after that though...
Definitely out of spec and a couple parts need replacement.
The next day he raced and kicked everyone's ass in it..... so
@@ChupacabraOffroad it is impressive that it still continues driving after, so nothing straight up broke.
They cost to much. 62,000
You don't know anything until you find out for sure. Unless you personally inspected it afterwards, you just don't know and neither do I.
Also, even if it did bend something, that's part of the game. You want performance? It's going to be a little more fragile. You want toughness? It's going to be heavier and slower. I'd say this machine strikes a pretty good balance between the two
those tires hit the mantis arms soo hard its almost like hitting the brakes..
Do you think it hits?
@@ChristianHernandez-tz8ecit DID hit. They had 3 flat front tires.
@bobbyb608 Yeah, because them hitting those rocks at that speed would never blow a tire!😂
@@tikka300wsm5 I should have clarified it was specifically from the upper arm that two of the 3 went flat.
@@bobbyb608 So, you're the Engineer who did the root cause analysis on the flat tires? No?🤣
💯💯💯💯💯💯🔥🔥🔥🔥
As he shredded the front diff from those tires locking up on the wishbone's..
WTF are you talking about???
They must have used a computer for the design . But it's working. How much $ for one ?
Have you used google yet ??? Try it
They start about $35K for a 2 seater....
And just like that the four seater has been revealed
Same thoughts here.
Wild.
That front end is insane by the looks at handling stuff but man it’s ugly. If I had the time money and resources I’d try to take the new motor out of the maverick and put it in an older x3 with like a blown motor. I just don’t like the looks of the new unit but hey I’m only in highschool r so that’s the dream
Looks like it's rubbing on the arms
I agree, but he still won the race, impressive.
That thing is just RIDICULOUS!!
A 4 seater would take away what it’s made for
Sure he's just lucky it didn't fall apart 😅
Not stock. So don't go buying 1 thinking you can try this at home
OBVIOUSLY
👍🏼
Wtf it can fit 35's
barely...lol and in this video, it's up for debate
No matter how much money they pump into buying influencers to prop up this mistake, it’s going down as a blunder. Canam had so many options to knock the Pro R out of the water.
I hear you, and it seems like they aren't selling as strong as they had hoped... this season will be a tell now that the 4 seater is out...
In you opinion: Better mechanical design = Mistake. Got it!
@ it doesn’t perform any better than the other regular x3s… and if that design were to be “superior” why hasn’t the industry adopted it? It was a gamble of a marketing scheme, that failed.
@@33NATAS Ah, so you did actual strength and stiffness testing under controlled conditions, or at least an FEA? No? Thought not.
@ everything has a breaking point and I mean everything, even bullet proof vest. If hit just right.. as I said, if they were superior, you’d see them in Baja Trucks suspension. Let’s face it, Canam got lazy and that’s the best they could do.. like an IPhone getting a 4th camera lens 🤦🏿♂️
There is absolutely no reason to have the upper arms exposed or shaped like that.
Geometry rules
There certainly is: Geometry/suspension/braking loads.
Small potatoes vs loren healys drop......
How fucking big is your microwave!?!
Haha
U can see the tire hitting those dumb looking control arms. Terrible design
Fr
They just sold a lot of maverick r's
Funny I just told my wife and just like that Maverick R will become the 1# hardest to find hardest to pre order car in the market
Glad I got mine!!
@schultzpeakranch5501 if i got one, id paint the front upper controll arm and spindle black.
My dealer ship has had 5 of them for over 3 months, they don’t sell lol
@7kzone you think the novelty of utvs are wearing off? I been trying to sell my turbo s for months with zero interest.
Boxed A arms. Clearly not stock bro
I didn’t say it was… regardless, super impressive
Notice how the entire suspension is actually changed...... pretty ignorant to speak on anything performance related as far as I'm concerned everything has been changed up its a fully custom race machine with ultra high clearance suspension components..... stock machine would not do this....
You apparently haven’t seen the design on the new Can-Am’s.
@Rt-ig4bk apparently your clueless as to what your lookin at stock vs race trim
@@coketrain4755
The entire suspension is not changed Dildo. There’s a lot of upgraded parts is what you mean!
60k
Lame!!!!! For the price of these stupid UTV'S you can build a rock crawler,truggy or sandrail that will eat this things lunch and never break. You're all outa line
Find me a rock crawler that can hit black trails in the south east, then turn around and do 70mph down the green for under 30k
Never break? Sand rail that can rock crawl? Rock crawler that can perform at high speeds also? What a ridiculous comment!!😂😂
Wrong…and everything breaks!😂
I can't understand the praise over this guy. That is terrible driving by anyone's standards. I don't think it is even possible to pick a worse line.
Go do this and report back.... I can't understand people commenting on things they can't do/ wont do/ haven't done. Regardless of line choice he was top qualifier of the most prestigious event, which led to a win..... Why the hate?
@@ChupacabraOffroad I actually do these things...have for decades. Not one single person would pick that line willingly. He got lucky in that specific situation and the fact he didn't end his entire weekend in that moment is a miracle. Can't comment on the rest of the race.
@@derek6044so you raced KOH this year? Have you ever raced KOH? Any Ultra4 races?
@@s2pointoh KOH and ultra 4 are the only places you find ledges? No I haven't travelled 3000 miles to drop this specific ledge. You nut swingers are hilarious. He literally hit every big rock he could have in that clip. Funny, I didn't see the 4800 class smashing boulders head on....must be because they suck at driving right?
I didn't hear anything other than an opinion if you can't handle it don't post it @ChupacabraOffroad
buddy this is loaded with shit thats not sold from the dealership. lmao
You don’t say? Thanks for the pro tip
Now get your face out of the video
Thanks for the watching
Thing is junk....rzr is smoking it
The actual results (in real life) say otherwise from KOH.... I'd suggest trying www.google.com before you comment.... please take your buffoonery to the crap youtube channels, this is for real offroaders...
LOL Sure, Cleetus.🤣