my uconnect on my radio wasn't working this morning.. and I did the same method and it works!! thank you so much ..can't live without my music darling mornings!! lol.
Thank you for this video. My radio occasionally gets stuck on but unresponsive when using Bluetooth. I was worried my battery would die but this did the trick! Thank you!!
Thank you! I have spent 3 days trying to figure this out. Been on the phone with Mopar, menu after menu, after menu🤬 speaking with uconnect customer service who had ZERO clue how to help me😠
I have a 2014 300 S and had tried numerous ways, once I did the vr & phone symbol i saw the message and followed the rest of the steps and it worked..thank you
I was told you hold the buttons on the steering wheel (not the head unit) and after 32 seconds it beeped. The rest of the procedure was the same as yours. Worked for me.
there is a circuit breaker or connector of some kind (black)..not the yellow one.. under the hood in the front fuse box that you have to unplug # 26. it doesn't come all the way out, so don't try and completely pull out. it pulls out and locks into place. this is also used for when you leave vehicle parked for long periods of time not to drain the battery. leave it unplugged for 1 min. it should reset. hopefully this helps.
Your advice worked perfectly for me! Thank you x in my 2012 Chrysler 200, it was fuse# 32, but it was a yellow double fuse that didn't pull will the way out, like you described. I pulled it out, waisted 30 seconds, and it worked perfectly ! plus it didn't erase any of my presets
My uconnect Bluetooth isn’t working… I have a 2011 jeep grand Cherokee it’s so aggravating. Everything else is working perfectly fine(radio, camera , etc) . Any recommendations???
When turning the key fob in the ignition to the first notch is ACC (accessory) mode for using the radio and other electronics, the second notch (without actually starting the vehicle) is the RUN mode which activates the alternator and initiates the cars computer and runs through the electrical sequence. Was finally able to get someone competant at UConnect customer service yesterday who walked me through these steps for my 2019 Caravan. Afterward, when first powering on the vehicle the UCoonect logo appeared and my station presets were reset. So the soft seems to be successful. Off Topic: Anyone happen to know why when I transfer MP3 files from a USB flash drive using the front USB port on the UConnect 430 (unit seen in this video) they duplicate on the hard drive and I either have to skip through the second or listen to each track twice?
I don't know how to explain but it worked for me... did all the steps and before you turn car on turn bluetooth off on your phone and then start the car and as soon as it starts wait 10 seconds and press the voice activation twice and it fixed my problem of having no sound or volume controls glitch
Funny I had to do something similar to my RAM 2014 yesterday. It did an OTA update while I was driving and lost all my saved GPS destinations. Uconnect had me do that, but no go. I lost everything and boy am I pissed.
Awesome. My AM/FM radio wasnt working (all other features were) and this reset worked perfectly for my 2010 Ram 1500. Thanks! Hope you found a solution to your issue
Worked for me!! Thanks a heap! My uConnect was acting like the only audio was call audio even though my phone was turned off.. I turned the volume knob and it displayed "phone volume.." was driving me crazy.
I'm having a similar problem with my you connect on my new Jeep Grand Cherokee. My problem is that it won't read any of my USB devices or USB zip drives. Do you have any solutions to this problem, or can yo point me in the rite direction as to were i can find a users manual? thanks in advance.
I’m gonna try this on mine with radio off. I bought a 2009 Dodge Journey. When I press the phone button it says “uconnect not equipped” yet when I go to mopar.com to make check my uconnect version it says mine is up to date... if anyone has any advice please reply and let me know what to do. Thank you
In my town country 2010 when I Any solution? I hope you help me thank you very much the phone icon it tells me that the system does not have uconnect Any solution? And thank you
In my 2011 ram 1500, I have to delete my old phone from the radio, then go through those steps in the video. Then it works, not sure how it works on a 2010 town & country without Uconnect.
my uconnect on my radio wasn't working this morning.. and I did the same method and it works!! thank you so much ..can't live without my music darling mornings!! lol.
No problem
Well that's 2 minutes 41 seconds I won't be getting back.
Thanks for the vid!! This was a huge pain in the butt. I pulled my negative battery terminal 45min, no luck. Soft reset worked awesome!
Thank you for this video. My radio occasionally gets stuck on but unresponsive when using Bluetooth. I was worried my battery would die but this did the trick! Thank you!!
Well, it worked for me on my 2010 Dodge Ram Laramie! So thank you for posting this!!!
NP, I had too do it again when I got my note9
Thank you! I have spent 3 days trying to figure this out. Been on the phone with Mopar, menu after menu, after menu🤬 speaking with uconnect customer service who had ZERO clue how to help me😠
Let me get this straight, you made a video about how it "did not work"???
tiredlawdog worked for me!
Try taking the key out during the 30 seconds with the door open
And then didn't even make a new video showing how to do it right! LOL!
Yeah. Much easier to just disconnect the battery
I have a 2014 300 S and had tried numerous ways, once I did the vr & phone symbol i saw the message and followed the rest of the steps and it worked..thank you
I was told you hold the buttons on the steering wheel (not the head unit) and after 32 seconds it beeped. The rest of the procedure was the same as yours. Worked for me.
You forgot to spin around 2 1/2 times and click heels together 3 times while singing star spangled banner backwards.
This solved my issue, which was that the screen was stuck on and incoming call. Thanks!
Thank you thank you thank you
Worked on my 2020 grand Cherokee
UConnect was completely frozen in the screen saver screen
Your a legend
there is a circuit breaker or connector of some kind (black)..not the yellow one.. under the hood in the front fuse box that you have to unplug # 26. it doesn't come all the way out, so don't try and completely pull out. it pulls out and locks into place. this is also used for when you leave vehicle parked for long periods of time not to drain the battery. leave it unplugged for 1 min. it should reset. hopefully this helps.
Your advice worked perfectly for me! Thank you x in my 2012 Chrysler 200, it was fuse# 32, but it was a yellow double fuse that didn't pull will the way out, like you described. I pulled it out, waisted 30 seconds, and it worked perfectly ! plus it didn't erase any of my presets
Would this happen to be the IOD fuse ??
Which vehicle are you describing for?
It worked for my h/w fail message.. Thank you
My uconnect Bluetooth isn’t working… I have a 2011 jeep grand Cherokee it’s so aggravating. Everything else is working perfectly fine(radio, camera , etc) . Any recommendations???
thanks it did work myne wasn't hearing my voice it seams it is working now. thanks a lot
" Please Attach USB Mass Storage With Update File To System Connecter, And Try Again. " Famous last words.
I couldn’t add any songs to my Sirius favorites on my 2011 Grand Cherokee and this worked. Thanks!
no problem
Aye help me wit mine 🤣 whenever I click VR she dont talk to me
Or you could go to the uconnect website and download the software update.
When turning the key fob in the ignition to the first notch is ACC (accessory) mode for using the radio and other electronics, the second notch (without actually starting the vehicle) is the RUN mode which activates the alternator and initiates the cars computer and runs through the electrical sequence.
Was finally able to get someone competant at UConnect customer service yesterday who walked me through these steps for my 2019 Caravan. Afterward, when first powering on the vehicle the UCoonect logo appeared and my station presets were reset. So the soft seems to be successful.
Off Topic: Anyone happen to know why when I transfer MP3 files from a USB flash drive using the front USB port on the UConnect 430 (unit seen in this video) they duplicate on the hard drive and I either have to skip through the second or listen to each track twice?
I don't know how to explain but it worked for me... did all the steps and before you turn car on turn bluetooth off on your phone and then start the car and as soon as it starts wait 10 seconds and press the voice activation twice and it fixed my problem of having no sound or volume controls glitch
Which do I press twice, VR button or phone icon button?
Funny I had to do something similar to my RAM 2014 yesterday. It did an OTA update while I was driving and lost all my saved GPS destinations.
Uconnect had me do that, but no go. I lost everything and boy am I pissed.
Mario Monti like goku mad??
Thanks, I tried the reset on my 2011 RAM and it worked.
Awesome. My AM/FM radio wasnt working (all other features were) and this reset worked perfectly for my 2010 Ram 1500. Thanks!
Hope you found a solution to your issue
thanks a lot for this video it helps me here in Europe in Slovakia , once more thanks a lot
Holy shit this absolutely worked for me!!!!! Thanks bro!!!
This worked for my 2013 dodge dart.
Worked for me!! Thanks a heap! My uConnect was acting like the only audio was call audio even though my phone was turned off.. I turned the volume knob and it displayed "phone volume.." was driving me crazy.
This is 6 years later but your supposed to get a software update if that wasn’t obvious already but that’s a problem with a lot of vehicles
You have to use the VR help and talk to the computer it will ask you questions and then a pin number
Does this also work if the radio doesn't want to turn on at all?
not sure
Mine was frozen & it Worked for me.
I'm having a similar problem with my you connect on my new Jeep Grand Cherokee. My problem is that it won't read any of my USB devices or USB zip drives. Do you have any solutions to this problem, or can yo point me in the rite direction as to were i can find a users manual? thanks in advance.
I am having the same issue. would love any advice on it. Was told I need to replace the whole unit.
I am glad to see this video helping people, I am making another one on ABS speed sensor.
yw, I still use it when I get a new phone.
thanks, it worked for me!!!
i am having that problem now .. it didn't work ., what did you do to finally get it to work
my GPS was freezing on the "Guidance by Garmin" screen (Dodge Grand Caravan) i did the soft reset and it work, GPS came on right away. 👍
I have no sound on my mygig 730n rer unit, when i hit the uconnect or vr it says activating but never do.
I’m gonna try this on mine with radio off. I bought a 2009 Dodge Journey. When I press the phone button it says “uconnect not equipped” yet when I go to mopar.com to make check my uconnect version it says mine is up to date... if anyone has any advice please reply and let me know what to do. Thank you
Did it work? what did you end up doing?
Good Job Jerrod!
subscribe, give it the thumbs up and don't forget to hit that bell for new videos. (LOL)
Error u connect phone not available
what did you do?
In my town country 2010 when I Any solution? I hope you help me thank you very much the phone icon it tells me that the system does not have uconnect
Any solution? And thank you
In my 2011 ram 1500, I have to delete my old phone from the radio, then go through those steps in the video. Then it works, not sure how it works on a 2010 town & country without Uconnect.
@@jayrodboogie Exactly, in my van does not allow me to add phone,
@@ir4pidleon897 Yeah, my video won't help you
My entire radio won’t turn on😭 idk what to do
Did you check the fuse
THANK YOUUUUU
Go to driveuconnect.com and download the update to a USB Flash Drive and it will update the radio. i just did it and it changed alot of issues.
Thank you!!
I will try this today
Epic!!
It worked for me man thanks
u r welcome
Sorry 2010 grand Cherokee
you got nowhere lol did you eventually got it to work?
yes
can you explain how?
update it if its says that
Worked for me 👍
Now my screen is black and doesnt work anymore loll
Omg with that big gay dumb watch on your wrist you can’t even wait 30 seconds
omg this worked for me!!! thanks so much awesome
no prob
Azriel superstar thank you!!!!
u r welcome
My dude who tf post a tutorial when it didnt work 😂
Still not working
it takes a couple of tries
Lol
Wasted my damn time
early