These are usually car or truck starter motors, Therefore, it requires a high electrical current to turn it on, and also provides great power and torque.
Absolutely correct! Unfortunately Financially strong currency countries are laziest yet intellegent by working on frame work made my the developing countries courtesy. Shame on those concurrently fake currencies .
Really? Removing oxidation and dissasembling then reassembling a rotor is such an incredible skill to you? I am 100% sure you aren't in the trade if you think that
@@dimitrijekrstic7567 parts changers do not even think of fixing the problem, just the revenue from replacing it again all too soon because it was poorly manufactured as a defective replacement. A craftsman has pride goes beyond dumbass statements that they are not better trained than a parts changer. Unless the parts come from China or Mexico.
They're repairing everything and that what i likes about them . The skills of repair job is dying in many countries but in Pakistan they are reparing anything which amazes me but i don't like retrading of tyres.
@@juanasanelli6831 te dijeron cómo hacerlo, porque no sabías ni para que era cada parte, o los cálculos si eras un niño.... Lo hiciste en un taller que se dedicaba a eso...
Si alli con los Hermanos Robaina aprendi hacerlo y como tomar nota de los pasos del bobinado antes de desarmarlo. Despues es todo practica . No tienes que calcular nada Ya esta .@@cronchynarvachki9882
да он её там зажал застучал несколько раз, полюбому медные запчасти у него были новые, просто засратые, чтобы их электричеством почистить и тд, на них ни одной выщербленки не видно
the engine shaft is tempered, it becomes solid. after an open fire, it becomes soft. you can see for yourself at home by heating the blade of a built-in knife on fire (be careful, you may get burned and will remain without a blade ;))
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
These Pakistani guys are in a league of their own...
🎉Orang-orang Pakistan memang pintar dan kreatif... 🇵🇰🇮🇩
P
@@zauji9066😊❤
😂 sempre tem que ter um, eu amo essa geração😂
In and on are different words with different meanings.
Thanks for showing this as a Electrical engineering student we don't know previously in practical.
Given enough time and a place to work these guys could probably make an aircraft carrier from scratch.
Nah.....they are satisfied with their armature
@@diwakarprakash1688
They could get a lucrative government contract.
اذا كانت لهم امكانيه يفعلو ماء يشائون عند ذأ
Thats how building stuff works..
@@diwakarprakash1688
That armature looked like the type they use in an aircraft carrier
Good work. Very clever.
I had never seen a motor with copper rods instead of wires. Wow.
Glad you liked it
These are usually car or truck starter motors, Therefore, it requires a high electrical current to turn it on, and also provides great power and torque.
They are used for high current devices
Embobinado de barra
This is called armature. Parts of DC motor or Self motor for heavy vehicles armature.
These types of hardworking person sre common in India, Bangladesh, pakistan and Nepal
Absolutely correct! Unfortunately Financially strong currency countries are laziest yet intellegent by working on frame work made my the developing countries courtesy. Shame on those concurrently fake currencies .
This is the skills of a craftsman, not a parts changer.
Really? Removing oxidation and dissasembling then reassembling a rotor is such an incredible skill to you? I am 100% sure you aren't in the trade if you think that
@@dimitrijekrstic7567 parts changers do not even think of fixing the problem, just the revenue from replacing it again all too soon because it was poorly manufactured as a defective replacement. A craftsman has pride goes beyond dumbass statements that they are not better trained than a parts changer. Unless the parts come from China or Mexico.
@@kitmouser a craftsman cost more.
As someone that loves assembly..... Part changing.
@@kitmouserthem what the point of fixing it to deal with it again? It will be a waste the first time
Отлично отреставрированный якорь двигателя. 👍
Сразу видно работу мастера!
Ona motor armatürü değil rotor derler. Elektrik motoru 2 parçadan oluşur rotor ve stator rotor dönen parçadır stator motordaki sargıdır
It Always blows my mind that people invented these things 😅
Only 1% people are responsible for all of humanity's achievements.
Rest are busy making friends, girlfriends, doing parties and playing games.
Actually it's more like 0.001%
Nothing amateur in this.... this is professional .
Much respect from Nigeria
Satisfying 😮
Thats nifty! I balance these at work and have always wondered how they're made.
Very good, talent work.
Медный купорос не являеться изолятором, и вместе соприкосновения обмоток будет межвитковое замыкание, вероятнее всего
AWESOME. REAL PROFESSIONAL. 😊
Super idea 💡
This is just amazing man. Us Americans are so used to throwing shit out, we couldn't imagine rebuilding motors like this. Props
In most countries the rewinding is also mechanical but we do it manually by hands❤❤
Looks pretty professional to me
Wonderful. Very Talented persons perfectly keep it up
Right they are really hardworking too
An excellent rewinding work shown here. Thank you.
One of the coolest looking designs
ประเทษที่จะไม่อดตายคือประเทศนี้ เก่งเหลือเกิน
Красивая работа
Lovely work by my great Pakistani skilled workers. ❤❤❤❤❤❤❤❤❤❤
素晴らしい仕上げと仕事
Last few weeks, saw old grandpa taught his very young boy to do this, only accurate copper parts, he must do it by himself.
Awesome 🎉
Вот молодец же! Прям приятно смотреть
Рад, что вам это нравится. Оставайся на связи.
Wow an awesome job..
Super 👌👌👌
Professional
Loved it
Now it's all replaced and done.
Disassembling, repairing, and reusing is the way to make the earth last longer.
Now that's a master of his craft!
These people knows how to survive by fixing instead of replacing.
What in USA is garbage, for these people is gold
good work skilled
So very good ❤
Recondition very easy ❤
Золотые руки👍👍👍🔥🔥
Он просто красавчик 👍
Made in PAKISTAN ❤❤❤. Good work from Germany 🇩🇪.
A definition of an Artist
У Пакистанцев золотые руки....
Un trabajo muy bien fino ....
Nit and clean work complete fitting 👍 good job
That's a really complicated work and he has done it perfectly
Awesome 🎉🎉
Thanks 🤗
Awesome really a good work.
These guy's work is awesome brilliant and smart..🤙🏽
Nice job! A true artisan and the hands of a master!
அருமையான வேலைப்பாடுகள்
Те самые ДПТ которые я изучал на парах электрооборудования👍
Bravo Bravo Bravo 👏👏👏👍👍👍👍👏👏👏👏👍
That was awesome, great skill set, thanks for sharing!
Okay this was some great skill work.
Hats off dude
They're repairing everything and that what i likes about them . The skills of repair job is dying in many countries but in Pakistan they are reparing anything which amazes me but i don't like retrading of tyres.
Unbelievable. Hand made.
Impressive 😎👍
Thanks for the visit.
It's so neat for a hand made repairing process
Süper Süper harika ❤❤❤❤
Кропотливая работа
Skilled work
veryyyyy gooddd!!
Это всё очень профессионально👍👍👍
Well done🎉
❤😊 beautiful and awesome
Thank you! 😊
Talented
ellos son buenos restauradores, llevan cómida a su mesa ❤
He really makes it look like just anyone could do it
Дай бог тебе здоровья
Great work keep it up
Esses trabalho manual é genial melhor que as máquinas
Nice work❤
Excelente trabajo , no cualquiera lo hace tan bien
Lo hice de niño
@@juanasanelli6831 te dijeron cómo hacerlo, porque no sabías ni para que era cada parte, o los cálculos si eras un niño.... Lo hiciste en un taller que se dedicaba a eso...
Si alli con los Hermanos Robaina aprendi hacerlo y como tomar nota de los pasos del bobinado antes de desarmarlo. Despues es todo practica . No tienes que calcular nada Ya esta .@@cronchynarvachki9882
Nice ❤
Neet work ❤🎉
Wow
Satisfying video
Glad you enjoyed.
good job
Perfect ,!!!
Good job!
Thank you! Cheers!
Во так выглядит гарантийный ремонт двигателя 😂
Вот так выглядит новые запчасти придурь
@@sasvarда новая именно по этому старая медь выбивается . И проходит гальваническую обработку ...
Ну ну проще для нового взять свежую медь .
Do you know that many parts you buy for your car that are sold as new are rebuilt? For me they are new .
да он её там зажал застучал несколько раз, полюбому медные запчасти у него были новые, просто засратые, чтобы их электричеством почистить и тд, на них ни одной выщербленки не видно
Muy bueno 😺
На более старых образцах используется горячая спайка контактов.
These guy can literally rebuild anything. Something we don't do any more
Pakistan is full of talent.. . It just need needs a spotlight and support❤
Nice job
تبارك الله على هذا العمل المذهل
Amazing that it doesn't cause a short circuit..This copper is unvarnished...
Después de mete dentro de un tarro con barniz aislante caliente se deja secar y queda en servicio por años
@@juanasanelli6831 Gracias por la información 👍👍
Everyone desperate to pick holes in his technique
You really think he would be this good at it if the didnt work? Dude makes a living doing this
It looks like the shape of it means it's not touching anywhere. There's paper insulator in the core too.
@@rambo-cambo3581wich means nothing in some parts of the world
Anh ta rất tuyệt 😊
Orang asia Selatan sangat kreatif 👍👍👍👍👍
Yeah especially with misinformation. They need to get off of our RUclips servers
thats not wire, thats a Rod.!
the torque is must be great ❤
the engine shaft is tempered, it becomes solid. after an open fire, it becomes soft. you can see for yourself at home by heating the blade of a built-in knife on fire (be careful, you may get burned and will remain without a blade ;))
Nice
А потом покупая такое: что-то долго не проработало...😢
Very good
Lindo acabamento 👏👏👏👏
Офигеть... Технологии на коленке
Classsic Pakistan people always amazing 👍
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍