@@rabbimir38 I got the black variant and the coating is still good, no problems so far. I got medium-sized hands and it’ll definitely work well if you claw or palm grip. It’s also nice they included the polling dongle in the box and you don’t have to go out and get it separately.
@tr4nnel752 it's really subtle to tell you the truth, I noticed basically no difference in game from the better sensor and higher polling rate. Really, it's just the shape for me that is better. (I like having a mouse, though, that has a higher polling rate as I have a 360hz monitor, and I can see 1000hz mice inconsistently skipping around on my desktop.) It's basically a placebo upgrade. I couldn't tell a different, but I like knowing that I have a better sensor and razors better tech in their sensors. If you got the cash to blow, why not. But if you're trying to make every dollar count for your setup, then there are far better upgrades.
Rtings lab tests are out here's the tldr: click latency is the 2nd fastest mouse yet (behind only the OP1) at 1.0ms, the super light 2 had 2.1ms of latency for comparison. Actual dpi (using 1600dpi results) only varied by 0.02% at most depending on how fast the mouse is physically moved, gprox got 0.27% of variation for comparison sensor latency is very good but only about 10% faster than the gprox for how long it takes to register it has started moving (a full 12.5ms), time taken to register you've stopped is exceptional at only about 1.5ms. Weight is in fact 54g
@@tmhamoty No they test at the fastest configurations. No mouse today is getting close to 0.1ms I'm sorry lmao. It's a relatively budget mouse thats managed to be almost twice as fast as 2nd place. That is extremely impressive regardless
hello. can you check if your mouse scroll moves a little left and right when you push it sideways? like a little bit loose/feel a bump but not to the point that it makes wobbling/rattling sound when you shake it.
As a lifelong deathadder user I might give this a try since GPX isn't doing it for me for palm grip, feeling some muscle strain around my thumb after an hour of play with it. Ergo mice where you at...
@@mrjamesinblogington No, it's the mouse I want to use for a very long time but their build quality is horrible, it never got better with newer batches.
@@RayCrush2008 Well, if this gives any light at the end of the tunnel, Bearded Bob claims that, having taken both mice apart, the Viper V3 Pro build quality has improved over the Viper V2 Pro, and, according to him, has done so by copying Logitech. Since the Dav3 Pro came out at roughly the same time as the Viper V2 Pro, this probably means the build quality was up to the same standards, but this also tells me the standards will probably be raised for the Dav4 if they continue along this trajectory. That said, what you mentioned seems to demonstrate why the GPX is sooooo hard to knock off its throne. It's said that shape is king, but many would rather get used to an accommodating shape that has the backing of a small nation's military budget of both R&D and QC behind it than a company that previously prioritized (and, to an extent, still does) putting RGB unicorn puke on everything.
@@mrjamesinblogington Build quality isn't the only thing, in the span of like 6 months I've had 3 or 4 dongles replaced for the viper, theres alot more QC issues than just the mouse.
I really like the larger size of the Viper V3 and Harpe Ace for relaxed claw. I can't do ergo shapes because they cause pain in the top of my hand after a couple hours of use, so I am glad that not all companies are making their light ambi mice small.
If you’re 19x10 and still thinking about it… you SHOULD!! It’s pricey but it’s hella high quality! I still use 1k hz on it cuz it doesnt drain the battery fast but it’s still super responsive
@@Keaweahe if your category is just speed, just got for the viper 8k. I highly recommend even the Op1 8k by endgamegear. I think it’s better than the viper 8k in terms of coating and shape. Performance is like hacks. The cord feels non existent too!
@@kevincampos766 looking at it. No problems with mouse for now though. Interrupt latency at 1.2 average with 36 in the priority separation and only running the central service.
Maining it too now after the switch from the OP18k i didnt like it at first. Somehow the DPI calibration with the OP18k was faulty and i needet to up a few DPI 1672 to be exact for 1600 DPI on the Op18k and now i'm performing the same as on the Op18k altough i still prefer the shape and the clicks on the OP18K tbh. Still, i'm ngl ... this is the best product from Razer yet and a top buy imho! With the Viper i settled on 4k polling though since Quake doesnt like 8k it seems, doesnt matter - 4 K polling on the Viper still performs great in comparison to the OP18K!
hello. Can you check if your mouse scroll moves a little left and right when you push it sideways? like a little bit loose and feel a bump, but not to the point that it makes wobbling/rattling sound when you shake it.
At 23 cm x 13 cm I could only fingertip this mouse as trying to claw this unfortunately cramped my hands. This is such a great mouse; just not great for me. What is great though is this one month update from Boardzy! The most based takes as always!
If I had such an unusual hand size, I would get a 3d printer and start trying to do shapes myself, and use the internals of another mouse. You will probably have to sand the mouse after you print it to make it smoother. Then, when you find a shape you like, you might even put a coat of paint on it. I have medium sized hands and Im strongly considering getting a 3d printer primarily to try to find my ideal mouse shape because I have an unusual way of holding the mouse. Already tried so many mice, Amazon sent me a message saying that I have bought new and returned open too many items.
Please, please do a comparison/update/ramble video of the two v3 pro's. (I need help convincing/justifying buying it but use the dav3p currently, i'm searching for a shape but the sensor is super enticing. Ty King.)
Just got one today and came from the beast X mini (drastically different in size) and I have small hands but for some reason this mouse fit like a glove for relaxed claw
hello. Can you check if your mouse scroll moves a little left and right when you push it sideways? like a little bit loose and feel a bump, but not to the point that it makes wobbling/rattling sound when you shake it.
You can test the 2 clicks against each other by the classic scientific bump test where you press the 2 clicks against each other and see which one caves first
Razer just keeps delivering top stuff.. I've recently switched from DA v2 to DA v3 pro. The new, refined shape is even better than on the old mouse. Very satisfied with the build quality. The software could've been a little bit better, though..
im gonna go from the lamzu atlantis mini to this. with reason (get clickbaited), the lamzu atlantis mini shape was starting to cause cramps in my hand, plus the battery life on it is insanely bad (dont know if its that mouse or just the one i got) 4k got me about a day of use while 1k got me a whopping 3-4 days. but i started to have tons of issues and eventually tried the superlight. my grip is a fingertip grip, and my grip was just more comfortable with the superlight (its a grip kinda like val pro something's grip where its at the bottom of the clicks) but due to the glass skates i had on, it just wasnt comfortable for games like cs or val. but was super nice to use for OW. ive currently been looking for a new mouse to use with a better more caved in side. which seems to be this. however ill update this when i get my hands on the mouse
I was a Pulsar X2H mini fan and never thought anything else would feel as good. I bought the V3Pro after Boardzy reviewed it and almost return it because it didn’t wow me. I decided to give the X2H a shot to compare and I could not get comfortable with it again. I still love the X2H but the V3Pro feels excellent and performs great. I know the two are different sizes but I thought my hands were meant for mini mice, the bigger size of the V3 felt great though. 100% worth!
That's surprising. They're incredibly different mice. The V3 is so so much bigger. Way too small for me. The regular X2H I still use all the time but the mini was God damn tiny
@@thinkforyourself5672definitely small and I never tried the regular X2H so I bet I would love it. But yeah the v3pro has been a seamless transition because of the weight. Maybe my hands are bigger than I think and a mini is too small but the V3 has been awesome. Both are incredible nice for sure!
hello. Can you check if your mouse scroll moves a little left and right when you push it sideways? like a little bit loose and feel a bump, but not to the point that it makes wobbling/rattling sound when you shake it.
Spent a week with the superlight 2 & returned it to try this for a few days, I think it’s a great mouse, but honestly the need for a cable & dongle at all times just doesn’t work for me as a on the go creator & gamer. When I’m sitting in a cafe or airport, trying to find the extra space for the cable/dongle can be a lil annoying & it’ll prolly be the reason I go back to the Superlight 2.
I spend about half my time playing games on a laptop in coffee shops or airports or hotels unfortunately, so the hyperspeed dongle & cable are a little cumbersome vs a simple usb receiver haha, but I love the mouse so I’m pretty hesitant to switch back.
This is like buying Honma golf clubs to play miniature golf. If you have the money to blow, sure, I guess... but I'd just buy whatever is most comfortable and cheap.
for my coding & AutoCAD, 3D design work having a lightweight & sensor accurate mouse is a godsend vs a standard office mouse, especially since often times I don’t have the space to fit a mousepad along with my other stuff on a small table or bar top in a shop. This is an extremely niche experience of course & I understand for most the cable/dongle combo won’t be a problem, but i figure it’s worth mentioning for anyone that has a mobile design/gaming setup like me & often find table/desk space to be a premium
What are some good skates I can pair with this mouse? the stocks skates arent bad but i enjoy my mice a bit faster gliding. I used tiger ice on my gpx and i loved it
hello can you check if your scroll wheel moves a little bit left/right when you push it sideways while the wheel is not scrolling? kind of loose on the inside (at a very minimal level) but not to the point that it makes wobbling/rattling sound when you shake it.
@@tr4nnel752 i bought two of them. White and Black. And you can definitely spot a difference beetween these two. Literally black are easier to click. While white click is more define and tensioned. Also white coating is indeed way better in my feeling, its way more grippy, while black after some time feels slippery. Although both copies are great. This mouse is literally insane. Recommend to anyone - even enemies.
@@tr4nnel752 i've had both and i preferred the gpx shape. Shape is very much personal preference so pretty dumb for someone to claim one shape is 'better'.
Hey Boardzy, I recently bought this mouse, and I have been loving it since I upgraded from Hyperx Pulsefire. One main issue with the Viper v3 Pro is the skates, as I found them really slow compared to my pulsefire haste stock skates. Any reccomendations? My current mousemat is Aqua Controll 2.
Is it good to put it on 8k herz all the time or is bad, bcs i feel like more dps when i use lower herz and is annoyng to use 1000 in windows having faster dps 8k in game, also is the battery rly getting his lifespan shortened or is not that big deal
Had the original viper ultimate, changed to deathadder v3 pro, I can cope with it but always wondering if its too big, does the viper v3 feel a bit smaller than the DAV3? enough to swap again? (Wish they would sell the viper v3 pro without the hyperpolling dongle for less money)
UPDATE: tried to buy viper v3 pro but literally went to like 10 stores, all outta stock (no, not driving to some city 100 miles out for a mouse) so its coming... estimated 10 week delivery ($15) bruh
Does the white version get yellowed? I want to get a white mouse again but last time I had one It got yellowed really bad and it looked disgusting (Glorious Model D)
old mice had a slot for double a batteries but this and gpx2 and new mice in general have built in batteries and it’s charged with type c in the front, you can unplug the dongle for 8khz polling it comes with and charge it with that
I returned my unit because i accidentally bought used on Amazon and the psycho installed the grip tape. Ended up getting the DAV3 Pro and slapped on some tiger ice v2 skates and I literally nųtted on my artisan zero. Sold my gpx with a broken scroll wheel for $65 and I sleep easy at night. Thanks boardzy
hello. can you check if your mouse scroll moves a little left and right when you push it sideways? like it wobbles/little bit loose but not to the point that it makes wobbling sound when you shake it.
i think if they made a wired version of this I would 100% purchase it, been a fan of the viper model for quite a long time and I'd be eager to get my hands on a wired version of this mouse
NGL after getting this mice I'm getting like 30% more frags in CS2 after adjusting my grip. I feel like some of the reasons are: it fits my hand extremely well, the white coating feels grippier after my hands are a little bit sweaty, it's pretty light, so, I can keep consistent movement after many hours. Can't tell the difference between this and my old mices in terms of sensor (I believe nobody can lol), but, the shape is 10/10.
hello. Can you check if your mouse scroll moves a little left and right when you push it sideways? like a little bit loose and feel a bump, but not to the point that it makes wobbling/rattling sound when you shake it.
@@johnbravo7689It moves side to side but its not loose. It feels solid, like it wouldnt move side to side unless im pressing it to the side. But i dont understand what you mean by bump.
usually dont talk shit about a product but the battery life of my v3 pro lasts 1-2 days which is pretty disappointing maybe i just got a bad battery idk?
For me with 18x10cm hand, the shape does not work. i have a better time on the vaxee XE, because I reach the thumb groove and the hump is to long on the viper
no, the viper hits a little bit higher in your hand, and the harpe hits deeper into your palm. the harpe also doesn’t flare out at the back as much as the viper
8k uses too much cpu, 4k aswell so in games like siege or valorant if you have a good cpu 4k is fine and for cpu intensive games I'd say 2k even with a good cpu. if you have a huge cpu bottlneck and your 1% lows aren't close to your hz you better use 2k or even 1k
serious reply tho, the coating is sad to me as I got the tarik edition recently and without grip tape its a party playing slip and slide trying to aim LOL
I have small hands. For context, I had a Viper V2 pro and couldn't hold it at all. I have a DAV3pro and I love it, but it is definitely too big for my hand. This mouse, though, is straight gas. I can palm grip the fuck out of it and it feels fantastic. A smaller version would probably be endgame for me, but for now, this mouse is amazing. I switched from a Lamzu Maya to V3pro and haven't gone back, despite the V3 being a much larger mouse.
Ok so this might sound weird but ever since I first watch u a few years ago I basically stole ur grip style it’s weird to say but I stopped palm gripping and started grabbing the mouse like u naturally idk what caused it but I think it’s funny now that I’m aware why it changed when I saw your video today
I got 2 copies of the razer viper v3 pro and both of them are slighly rough/scratchy on everymousepad ive used and even bought a new mousepad just to make sure its the mouse feets fault. Anyone with the same issue?
Literally went to Best Buy and bought the V3 Pro after watching your review vid, it’s a fantastic mouse. Also upgraded from a GPX
How you feel with the grip?
@@rabbimir38 I got the black variant and the coating is still good, no problems so far. I got medium-sized hands and it’ll definitely work well if you claw or palm grip. It’s also nice they included the polling dongle in the box and you don’t have to go out and get it separately.
I did the exact same thing, and I also upgraded from a GPX.
Can you explain how this is an upgrade over the GPX? Is it really something that you can feel or experience?
@tr4nnel752 it's really subtle to tell you the truth, I noticed basically no difference in game from the better sensor and higher polling rate. Really, it's just the shape for me that is better. (I like having a mouse, though, that has a higher polling rate as I have a 360hz monitor, and I can see 1000hz mice inconsistently skipping around on my desktop.) It's basically a placebo upgrade. I couldn't tell a different, but I like knowing that I have a better sensor and razors better tech in their sensors. If you got the cash to blow, why not. But if you're trying to make every dollar count for your setup, then there are far better upgrades.
Rtings lab tests are out here's the tldr:
click latency is the 2nd fastest mouse yet (behind only the OP1) at 1.0ms, the super light 2 had 2.1ms of latency for comparison.
Actual dpi (using 1600dpi results) only varied by 0.02% at most depending on how fast the mouse is physically moved, gprox got 0.27% of variation for comparison
sensor latency is very good but only about 10% faster than the gprox for how long it takes to register it has started moving (a full 12.5ms), time taken to register you've stopped is exceptional at only about 1.5ms.
Weight is in fact 54g
didnt the op1 8k have 77 microseconds at the minimum iirc 🤔🤔🤔🤔
@@browniex5120 no in reality it has 0.6ms, that's probably theoretical
@@Frozoken@ 8k it has 77us, @ 1k 0.6 ig?. Then again if rtings is using system latency instead of the finalmouse latency tester, that's probably why.
@@tmhamoty No they test at the fastest configurations. No mouse today is getting close to 0.1ms I'm sorry lmao. It's a relatively budget mouse thats managed to be almost twice as fast as 2nd place. That is extremely impressive regardless
@@Frozoken rtings tests system latency though, not the click latency itself
Solid specimen the Viper v3 Pro, my main now
We got the RS legend in here, its my main aswell buddy main game Valorant, i miss riskfighting on Rs tho but the game is literally dead since a while
hello. can you check if your mouse scroll moves a little left and right when you push it sideways? like a little bit loose/feel a bump but not to the point that it makes wobbling/rattling sound when you shake it.
@@erdemakaairdamn6439The game? Far from dead lmao.
As a lifelong deathadder user I might give this a try since GPX isn't doing it for me for palm grip, feeling some muscle strain around my thumb after an hour of play with it. Ergo mice where you at...
While the V3 is larger than the V2, the hump is still less pronounced than the GPX.
Also, are there problems with the Dav3 shape?
@@mrjamesinblogington No, it's the mouse I want to use for a very long time but their build quality is horrible, it never got better with newer batches.
@@RayCrush2008 Well, if this gives any light at the end of the tunnel, Bearded Bob claims that, having taken both mice apart, the Viper V3 Pro build quality has improved over the Viper V2 Pro, and, according to him, has done so by copying Logitech.
Since the Dav3 Pro came out at roughly the same time as the Viper V2 Pro, this probably means the build quality was up to the same standards, but this also tells me the standards will probably be raised for the Dav4 if they continue along this trajectory.
That said, what you mentioned seems to demonstrate why the GPX is sooooo hard to knock off its throne. It's said that shape is king, but many would rather get used to an accommodating shape that has the backing of a small nation's military budget of both R&D and QC behind it than a company that previously prioritized (and, to an extent, still does) putting RGB unicorn puke on everything.
@@mrjamesinblogington Build quality isn't the only thing, in the span of like 6 months I've had 3 or 4 dongles replaced for the viper, theres alot more QC issues than just the mouse.
@@mrjamesinblogingtonfound the Logitech fanboy
I really like the larger size of the Viper V3 and Harpe Ace for relaxed claw. I can't do ergo shapes because they cause pain in the top of my hand after a couple hours of use, so I am glad that not all companies are making their light ambi mice small.
It’s been out for a month😮
I don't believe it.
Shocking.
Mine just arrived today lets get it baby thanks to your videos you steered me in the correct direction.
Buying mine in Canada today my G303 broke, I hope to main this and make history
Sweet jesus g303?!
i'm curiously NOT shocked!
V2 to V3 for me has been such an amazing upgrade!
I’m gonna go from the V1 to this
If you’re 19x10 and still thinking about it… you SHOULD!! It’s pricey but it’s hella high quality! I still use 1k hz on it cuz it doesnt drain the battery fast but it’s still super responsive
You use 1k hz because your trying to drain the battery? I just use 1k hz for the speed.
@@Keaweahe oops. Im trippin. I meant it doesnt drain as fast. But it’s just so good that 1k hz is like already better than other mouses still
@@kevincampos766 nice. Im looking at the razer 8k or v3 next but viper ultimate has no problems with good settings. Still very fast.
@@Keaweahe if your category is just speed, just got for the viper 8k. I highly recommend even the Op1 8k by endgamegear. I think it’s better than the viper 8k in terms of coating and shape. Performance is like hacks. The cord feels non existent too!
@@kevincampos766 looking at it. No problems with mouse for now though. Interrupt latency at 1.2 average with 36 in the priority separation and only running the central service.
Maining it too now after the switch from the OP18k i didnt like it at first.
Somehow the DPI calibration with the OP18k was faulty and i needet to up a few DPI 1672 to be exact for 1600 DPI on the Op18k and now i'm performing the same as on the Op18k altough i still prefer the shape and the clicks on the OP18K tbh.
Still, i'm ngl ... this is the best product from Razer yet and a top buy imho!
With the Viper i settled on 4k polling though since Quake doesnt like 8k it seems, doesnt matter - 4 K polling on the Viper still performs great in comparison to the OP18K!
Battery is fine tbh, charging after a few days should not be a problem at all.
It charges quite quickly.
How do the clicks compare? I just got the OP18k and I'm looking for switches as close as possible to the Omron D2FC-F-7N that my Logi G Pro Hero uses
@@DreamingPhenom probably the Kalih GX 50-55gf thats the ones i've got an feel the best
I've been using mine non-stop. Ever since I got it its just been feeling more and more comfortable. Best mouse I've used in YEARS.
the only issue with my copy is the right click is somewhat squeaky/crunchy, other than that the mouse is legit perfect. W shape
hello. Can you check if your mouse scroll moves a little left and right when you push it sideways? like a little bit loose and feel a bump, but not to the point that it makes wobbling/rattling sound when you shake it.
@@johnbravo7689it moves like 1-2mm to the side, atleast at my copy
21x10.5 here, been maining it over gpx and I have no more pain on top forearm 👍
Which grip style do you use? I have similar sized hands, use the palm grip, and I'm wondering if it might be a bit too small.
I think the differences you are experiencing between white and black are to do with the retail units and not the colour.
it's been a whole month and Razer still hasn't released it in my region yet :) great job Razer
At 23 cm x 13 cm I could only fingertip this mouse as trying to claw this unfortunately cramped my hands. This is such a great mouse; just not great for me. What is great though is this one month update from Boardzy! The most based takes as always!
If I had such an unusual hand size, I would get a 3d printer and start trying to do shapes myself, and use the internals of another mouse. You will probably have to sand the mouse after you print it to make it smoother. Then, when you find a shape you like, you might even put a coat of paint on it. I have medium sized hands and Im strongly considering getting a 3d printer primarily to try to find my ideal mouse shape because I have an unusual way of holding the mouse. Already tried so many mice, Amazon sent me a message saying that I have bought new and returned open too many items.
would you say the razer viper v3 pro or the deathadder v3 pro is better
Please, please do a comparison/update/ramble video of the two v3 pro's. (I need help convincing/justifying buying it but use the dav3p currently, i'm searching for a shape but the sensor is super enticing. Ty King.)
Viper v2 Pro was flawless for me. I really don't know how to feel about this new shape. I bought wlmouse beast x max. V3P's hump is too much for me
Just got one today and came from the beast X mini (drastically different in size) and I have small hands but for some reason this mouse fit like a glove for relaxed claw
hello. Can you check if your mouse scroll moves a little left and right when you push it sideways? like a little bit loose and feel a bump, but not to the point that it makes wobbling/rattling sound when you shake it.
whats ur hand size
I'm tempted to get one of these but the DAV3 is my current main and it's the best mouse I've ever used and I can't give it up.
You can test the 2 clicks against each other by the classic scientific bump test where you press the 2 clicks against each other and see which one caves first
That would be insanely difficult to do for a number of reasons
Razer just keeps delivering top stuff.. I've recently switched from DA v2 to DA v3 pro. The new, refined shape is even better than on the old mouse. Very satisfied with the build quality.
The software could've been a little bit better, though..
im gonna go from the lamzu atlantis mini to this. with reason (get clickbaited), the lamzu atlantis mini shape was starting to cause cramps in my hand, plus the battery life on it is insanely bad (dont know if its that mouse or just the one i got) 4k got me about a day of use while 1k got me a whopping 3-4 days. but i started to have tons of issues and eventually tried the superlight. my grip is a fingertip grip, and my grip was just more comfortable with the superlight (its a grip kinda like val pro something's grip where its at the bottom of the clicks) but due to the glass skates i had on, it just wasnt comfortable for games like cs or val. but was super nice to use for OW. ive currently been looking for a new mouse to use with a better more caved in side. which seems to be this. however ill update this when i get my hands on the mouse
I was a Pulsar X2H mini fan and never thought anything else would feel as good. I bought the V3Pro after Boardzy reviewed it and almost return it because it didn’t wow me. I decided to give the X2H a shot to compare and I could not get comfortable with it again. I still love the X2H but the V3Pro feels excellent and performs great. I know the two are different sizes but I thought my hands were meant for mini mice, the bigger size of the V3 felt great though. 100% worth!
That's surprising. They're incredibly different mice. The V3 is so so much bigger. Way too small for me. The regular X2H I still use all the time but the mini was God damn tiny
@@thinkforyourself5672definitely small and I never tried the regular X2H so I bet I would love it. But yeah the v3pro has been a seamless transition because of the weight. Maybe my hands are bigger than I think and a mini is too small but the V3 has been awesome. Both are incredible nice for sure!
hello. Can you check if your mouse scroll moves a little left and right when you push it sideways? like a little bit loose and feel a bump, but not to the point that it makes wobbling/rattling sound when you shake it.
What is your hand size? I'm 16x9 and I'm seriously thinking about testing the VV3 PRO. Is this your main mouse now?
Yet again boardzy gives the best mouse reviews (shocking)
Just purchased the Viper v3 pro but noticed that whenever I click the mouse rocks as if it isn't flat or leveled. Does anyone else have this issue?
plz assist with razer viper v3 pro reviews for skates. ideally explaining with diff mouse pads? love your deep reviews.
How does it compare to the Viper Ultimate? Wondering if I should upgrade.
Same thing from me but I still love my Viper Ultimate
A mini version would go crazy ngl
Follow PMM they’re cooking smth
WHY U SAY "SHOCKING" AT THE END BUT "NOT SHOCKING" IN TITLE? IG THERE'S SHOCKING CONSPIRACY AT PLAY HERE
👨🌾🏃♂️🗿😤😤
Spent a week with the superlight 2 & returned it to try this for a few days, I think it’s a great mouse, but honestly the need for a cable & dongle at all times just doesn’t work for me as a on the go creator & gamer. When I’m sitting in a cafe or airport, trying to find the extra space for the cable/dongle can be a lil annoying & it’ll prolly be the reason I go back to the Superlight 2.
All I can say is what
I spend about half my time playing games on a laptop in coffee shops or airports or hotels unfortunately, so the hyperspeed dongle & cable are a little cumbersome vs a simple usb receiver haha, but I love the mouse so I’m pretty hesitant to switch back.
This is like buying Honma golf clubs to play miniature golf. If you have the money to blow, sure, I guess... but I'd just buy whatever is most comfortable and cheap.
for my coding & AutoCAD, 3D design work having a lightweight & sensor accurate mouse is a godsend vs a standard office mouse, especially since often times I don’t have the space to fit a mousepad along with my other stuff on a small table or bar top in a shop. This is an extremely niche experience of course & I understand for most the cable/dongle combo won’t be a problem, but i figure it’s worth mentioning for anyone that has a mobile design/gaming setup like me & often find table/desk space to be a premium
the main click comfort grooves are soooo aggressive towards the top. really messes up the feeling for me
Finalmouse seriously made the hump of Tiger only 38.3mm this is almost as flat as Viper V2. At least on BeastX Max the hump is 39mm.
What are some good skates I can pair with this mouse? the stocks skates arent bad but i enjoy my mice a bit faster gliding. I used tiger ice on my gpx and i loved it
Mouse is perfect for me, gpx cramped my fingers to the point it was unusable
hello can you check if your scroll wheel moves a little bit left/right when you push it sideways while the wheel is not scrolling? kind of loose on the inside (at a very minimal level) but not to the point that it makes wobbling/rattling sound when you shake it.
GPX 2 is 50 bucks cheaper than the viper v3 pro in my place without any promo code, do you think the gpx 2 is the better choice?
i would say get viper v3 pro no matter what. Improvement in switches and sensor. Shape is also better
@@iNasteable At the same time, we're talking about non perceivable differences right? Or not?
@@tr4nnel752 i bought two of them. White and Black. And you can definitely spot a difference beetween these two. Literally black are easier to click. While white click is more define and tensioned. Also white coating is indeed way better in my feeling, its way more grippy, while black after some time feels slippery. Although both copies are great. This mouse is literally insane. Recommend to anyone - even enemies.
@@tr4nnel752 i've had both and i preferred the gpx shape. Shape is very much personal preference so pretty dumb for someone to claim one shape is 'better'.
Hey Boardzy, I recently bought this mouse, and I have been loving it since I upgraded from Hyperx Pulsefire. One main issue with the Viper v3 Pro is the skates, as I found them really slow compared to my pulsefire haste stock skates. Any reccomendations? My current mousemat is Aqua Controll 2.
Is it good to put it on 8k herz all the time or is bad, bcs i feel like more dps when i use lower herz and is annoyng to use 1000 in windows having faster dps 8k in game, also is the battery rly getting his lifespan shortened or is not that big deal
Had the original viper ultimate, changed to deathadder v3 pro, I can cope with it but always wondering if its too big, does the viper v3 feel a bit smaller than the DAV3? enough to swap again? (Wish they would sell the viper v3 pro without the hyperpolling dongle for less money)
its the same size as viper ult but a bit higher back hump
definitely smaller than the DAV3.
there are so many mice that have been released this year, could you do an updated "Top 5 Best Budget Mice"
I just can’t with these shapes. I‘m faceit lvl. 10 but I still use a g305 (not even modded lol)
Why doesn't it have optical switches though? Is there a single reason not to, after V2 pro had them?
UPDATE: tried to buy viper v3 pro but literally went to like 10 stores, all outta stock (no, not driving to some city 100 miles out for a mouse) so its coming... estimated 10 week delivery ($15) bruh
is it worth to update from gpx to v3 pro or better go with gpx2?
I have the same question
Yes
Why imagine if you had a force gauge when you can get it! Level up!
11mins 500views boardzy is killing it
Does the white version get yellowed? I want to get a white mouse again but last time I had one It got yellowed really bad and it looked disgusting (Glorious Model D)
whats ur hand size and would u recommend it for a 17x10 hands
what mouse feet are best for the viper v3 mixed with the artizan zero???
How's the scroll wheel now? One of my main concerns with Razer as I'm currently using a Viper 8k with a non-functional scroll wheel.
I'd like to know as well. I had two Viper V2 pros shitting scroll wheels after few months. Terrible. Was this issue addressed in V3?
does the polling rate cap at 1000 when the mouse is plugged in and charging?
Can I use alcohol to clean it? Will it affect the coating?
Informative video, how do you charge the Razer Viper V3 Pro is my question? I never had a wireless mouse thats why
old mice had a slot for double a batteries but this and gpx2 and new mice in general have built in batteries and it’s charged with type c in the front, you can unplug the dongle for 8khz polling it comes with and charge it with that
Can you please check does a viper v3 pro 8k dongle that it comes with it works with other razer mices such as DA 3 pro or viper v2 pro
do u think the difference is worth 55usd more?.The gpx 2 is 125usd and v3 pro is 180usd.thx
Should I put the grip tape on my white viper v3 pro
I returned my unit because i accidentally bought used on Amazon and the psycho installed the grip tape.
Ended up getting the DAV3 Pro and slapped on some tiger ice v2 skates and I literally nųtted on my artisan zero.
Sold my gpx with a broken scroll wheel for $65 and I sleep easy at night. Thanks boardzy
Is it worth swapping from DAV3?
hello. can you check if your mouse scroll moves a little left and right when you push it sideways? like it wobbles/little bit loose but not to the point that it makes wobbling sound when you shake it.
wow, the mouse wheel is still working after a whole month?
i think if they made a wired version of this I would 100% purchase it, been a fan of the viper model for quite a long time and I'd be eager to get my hands on a wired version of this mouse
it comes with a usb you can just leave wired in though?
@@Peraliq I ain't paying 160 dollars for a mouse with a feature I'll never use 💀
Is the Razer DeathAdder V3 comparable to this one?
NGL after getting this mice I'm getting like 30% more frags in CS2 after adjusting my grip. I feel like some of the reasons are: it fits my hand extremely well, the white coating feels grippier after my hands are a little bit sweaty, it's pretty light, so, I can keep consistent movement after many hours. Can't tell the difference between this and my old mices in terms of sensor (I believe nobody can lol), but, the shape is 10/10.
hand size?
Whats yout grip type? And the hand size please
Has anyone flashed a UV blacklight on the white model mouse? Mine has a huge bright white stain right on the top that smears.
hello. Can you check if your mouse scroll moves a little left and right when you push it sideways? like a little bit loose and feel a bump, but not to the point that it makes wobbling/rattling sound when you shake it.
@@johnbravo7689It moves side to side but its not loose. It feels solid, like it wouldnt move side to side unless im pressing it to the side. But i dont understand what you mean by bump.
Pricing here in NZ is over $300. Gona wait for it to go on sale before I buy 1
Jesus lmao
$280 in Australia. Go APAC!
Isn't different dollar though? Like not USD
over 200 Canadian here as well and we get paid terribly lol
@@DelScully damn I feel for y'all that sucks
is the coating better enough on white to get it over the black, even though I prefer black colour ?
From what everyone is saying the white has a way better coating. If you want a more rubberized and grippy mouse the white is better.
usually dont talk shit about a product but the battery life of my v3 pro lasts 1-2 days which is pretty disappointing maybe i just got a bad battery idk?
This mouse have a film on mousefeet, i have shop but i don’t know if have film on feet. Thanks
is this mouse good fit for 18x10 hand dim? im more on a claw grip. thank you.
Yeah I think it could work well, especially if you're used to medium-large shapes already
For me with 18x10cm hand, the shape does not work. i have a better time on the vaxee XE, because I reach the thumb groove and the hump is to long on the viper
still in love with the lamzu atlantis og shape
@boardzy you mean you prefer switches on the white one or the black one?
Turtle Beach Pure Air and Burst 2 review when brother boardzy? What about XTRFY's new PRO ergo and ambi new lineups?
great video, thank you
Apart from the weight and the price tag what are the noticeable differences between this and the hyperspeed v3
the new sensor
I want mouse with little back hump support for relaxed claw 20cm hand size which mouse you guys suggest ? Viper v3 or gpx2
viper V3 pro
In canada its still not available on amazon or at my local best buys :/
Does the V3 replace the ULX as your main?
Would you say the shape is similar to the Asus harpe ace? It seem like a similar shape.
no, the viper hits a little bit higher in your hand, and the harpe hits deeper into your palm. the harpe also doesn’t flare out at the back as much as the viper
Artisan Zero feels like a mudpad with those full-size skates, Is there any good mousepad with less static friction?
I use artisan hien, its faster than artisan zero
@@jmantv7 Love my hayate otsu more than the hien
Is the shape better for palm grip then g pro superlight
How do you Unshock yourself
Can u put num pad on the side 😮
I need mouse with optical wheel encoder for god's sake.
Vaxee
I was so disappointed that they changed the Viper pattern on the top to a boring straight line :'(
What hz are you running? If not 8k, why not?
8k uses too much cpu, 4k aswell so in games like siege or valorant if you have a good cpu 4k is fine and for cpu intensive games I'd say 2k even with a good cpu.
if you have a huge cpu bottlneck and your 1% lows aren't close to your hz you better use 2k or even 1k
serious reply tho, the coating is sad to me as I got the tarik edition recently and without grip tape its a party playing slip and slide trying to aim LOL
Bruh i was about to say “ why u shaking like that” 😂
I have small hands. For context, I had a Viper V2 pro and couldn't hold it at all. I have a DAV3pro and I love it, but it is definitely too big for my hand. This mouse, though, is straight gas. I can palm grip the fuck out of it and it feels fantastic. A smaller version would probably be endgame for me, but for now, this mouse is amazing. I switched from a Lamzu Maya to V3pro and haven't gone back, despite the V3 being a much larger mouse.
@DjNaste What are the dimensions of your hand?
@@zlandboss Small, not large. Maybe medium?
@@DjNaste How many in centimeters? Length and width?
@@zlandboss A few, maybe a couple?
@@DjNaste Mine is 18.5 cm x 9.5 cm
Yo can you review the delux m900? It just came out not too long ago
Ok so this might sound weird but ever since I first watch u a few years ago I basically stole ur grip style it’s weird to say but I stopped palm gripping and started grabbing the mouse like u naturally idk what caused it but I think it’s funny now that I’m aware why it changed when I saw your video today
Can you put different size skates on it? Those skates to big lol
I got 2 copies of the razer viper v3 pro and both of them are slighly rough/scratchy on everymousepad ive used and even bought a new mousepad just to make sure its the mouse feets fault. Anyone with the same issue?
Get glass skates
6:50 that is exactly my hand size, its like u predicted me asking lol
How are you measuring your hands?
@ measuring tape
@ I meant method
@@GoochMuncher6969 from end to end, length from the top of middle finger to wrist, and width from the end of the thumb to pinky
does anyone have a issue with the bottom by the dpi buttion making a click sounds from the shell
=
what franken-corepadz did u put on the white one
Zowie U2 bottom skate, OP18k top skate. Couldve probably found a better top skate but it was what I had sitting around
ty
what xlr mic is that boardzyy
Came to say that I got a gengar edition off aliexpress and there is no side flex. I guess I got lucky.