how to rebuild a used turbocharger
HTML-код
- Опубликовано: 14 дек 2015
- In this video I demonstrate the proper methods of cleaning and rebuilding a turbocharger . Turbos are pretty simple to work on with basic tools and skills. More and more custom motorcycles and cars being customized with turbos and superchargers, so it's good to have rebuilding experience for when they wear out and fail.
Ichiban Tees and Hoodies:
teespring.com/stores/ichiban-...
New Facebook Page:
/ ichiban-moto-523158707...
Twitter:
@IchibanMoto1
Instagram:
/ ichibanmoto
Send me mail! - whenever there is enough stuff in the mail bag to put together a subscriber mail reading and shout-out, I will put up a video for you guys! Thanks to those of you who already sent me letters and gifts !
Send me stuff to use in videos !
Yes- I actually do send stickers out to those who contribute bits, parts, stuff for my projects and pretty much everyone who I talk about or thank in my videos. If you want to send me bike stuff, things for potential use in videos or tools to review etc. (or even just cash donations ! )
mail them to me:
Ichiban Moto
PO Box 1362
Highland Park, IL 60035
USA
Yes- you can just buy Ichiban Moto stickers - they are on ebay ! Авто/Мото
Bro pulled out every tool except the correct one. Love it 😂
BIG ERROR: turbines are balanced so you must mark the relative position of both turbines before open the shaft.
I was about to ask about this.
“The right tools” 😂😂
Do as I say..not as I do :)
Does he have any proper tools?
Painful to watch use of vice grips and swiss army knife
Lmao he still made it work!
Left handed vice grips .....!!
Holly shit that dishwasher needs a gold medal
+Arlind Sadikaj It has had a few bad ass mods thrown at it
+Ichiban Moto Could you make a video of how to make a bad ass dish washer?
+Ichiban Moto 5 out 5 ichiban moto stickers for that dishwasher!
Arlind Sadikaj is this for real,did you see his tension wrench WTF
The store was out of blue assembly paste now i have to use the white paste with red and blue stripe in it.
+Harry Nak overkill
It will probably work just as well...
I learned so much on turbos from watching. Out to get a left handed vise grip. Thanks Ichiban!
+PistnRods you should Turbocharge your SV ! that would be bad ass !
Is turbo fin need to be balanced if u open it?
@@billyarden9708 no balance really needed as the wheels are the same. However the clocking of the turbine wheel and compressor wheels relative to each other is important if you want to retain the original balance. Although if you don't follow that the turbo is unlikely to fly apart..it may...may...fail a little earlier though.
That torque wrench; I freaking lost it😂😂😂
you can make one too. i have a video how to make torque wrenches
If someone used a utility knife to tighten the security screws on my turbo I think I'd go insane. Somebody sponsor this guy and buy him some tools.
I've seen worse...
Like the bit where he says "A lot of these are metric so make sure you use the right tools" Then he goes and uses mole grips and a knife to undo nuts and bolts. :/
even metric have a 0 tolereance
those are torx screws, you can buy them at any tool shop
in germany they do
My screwdriver doesn't have a handle, so I had trouble tapping it to remove the compressor. I had a look around and the only thing I could find was a frozen hotdog. After a few taps it came right off, plus it smells like hotdogs now! Thanks Ichiban!
+risc19 oh, bad ass! I love hot dogs ! especially with a few sporks of mustard !
Was it the big hot dog from Costco.. you can bang the turbo housing and the girl next to you with that hot dog...lol
The driver part doesn’t have to be in the handle to use the handle part.
Sheesh 🙄
My ex wife had turbo problems. She went to our local garage and the mechanic said it looked like she had blown a seal. No she said, i have just had an ice cream.
+Andrew Wilson hahaha !
Andrew- I don't get it. Just kiddin'. You know us jocular Canadians.
🤣🤣
His ultrasonic cleaner was really his wife's fun toy...
😂😂😂😂
Brilliant. I knew the dishwasher would come in handy for home turbo repairs.
Had to show the boss this video, He didnt think ive been doing turbos correctly for a long time, now I was able to prove him wrong! Thanks!
I used my wife's dish washer like you said. Now I'm wearing it and can no longer get into my car, Turbo problem fixed! Great vid many thanks.
I would be strangled in my sleep if I put that in my wifes dishwasher. Guess we know who the real men are around here...lol
😂😂😂😂, you're very funny, I thought about the same thing when I heard him say'I will use my wife's dish washer' I thought are you sure?'...
That's what I was thinking when he said he used his wife's dishwasher, I'm surprised he could get away with just joking about that.he has more balls than me that's for sure.😢
that diy torque vise-grip ghetto rigged tool 😂😂😂hahah
I give your dishwasher 5/5 stickers!
It's a shame the vast majority of people are right handed. It makes the market for left handed vice grips smaller. I'm having so much trouble finding one.
+Alban Gaval I'm left handed, been so all my life... needless to say, I've amassed quite the collection of left handed hand tools. I've got some spares I'd be willing to trade for a metric monkey wrench...
+jrmym2 if I strike out at tool jumbles, I just post wanted ads on crabslist
Alban Gaval i have 2... Ill sell you one for the small sum of 750.00.....american quarters only
jrmym2 the master mechanics tool I covert the most is his left handed drill & bits. I have searched all my life for that combination.
Awesome video. Best one for beginners on youtube. You make this look not scary. That ultrasonic cleaner is awesome.
Awesome video, I also like your tools great set up. You got skills
Best short video ever . Thanks mate. Going to rebuild my Mercedes Benz 300 coupe turbo diesel now
Great info! And magnificently sarcastic I love it
Thanks for that Torque Wrench idea.............you just saved me a small fortune. !
A good balance of humour and useful info. Five thumbs up. 👍👍👍👍👍👍
i loved the great tools you used nothing better than using the right tools for the job lol great vid
At 6:03 I have the same torque wench. Got it from the Snap-Off truck yesterday.
I had to make mine... I have a how-to video here on youtube. The snap off truck has good ice cream and I look forward to hearing the music during the summer
Thank you. One of the best videos I've seen in a while.
How do you fix a ball bearing turbo?? My turbo bearings just started making noise when I turn the car off amd turbo spooling down. No oil burnage or how much would you charge for to fix? It’s a precision nx2 turbo
Totally lost it on the timing marks 😂
can you please share your super sonic washer , how you built it ,, thanks
i will add that to the list
Nicely demonstrated, well worth the 5 stars... Have a great Holiday season and see you in the new year :)
+GTs Garage ,, and have a bad ass New Year !
I have a ford fiesta 1.4 tdci duratorq and the turbo is a little worn out. Where can i buy the spares kit from?
Good work. A very informative video indeed. I'm going to take the turbo out of my car this evening and service is ready for the morning commute. I've got an important meeting first thing and I want to get to work as quick as possible so that I'm not late: it's kind of an interview for a senior manager position (it's a real big deal). Spending a few hours rebuilding my turbot should help me relax and make sure I don't flounder at the interview.
Este video es malo burro!
zen master fluchter !
you should polish the inside of your tires too! you know so the air flow is better inside your tire.
Dana Kelley
Check.
this is the best tutorial i have found on rebuilding a turbo yet! simple and straight forward, now i can rebuild my turbocharger with my vise grips and scissors :D
This demistified turbos for me - it has given me the confidence to pull our broken laptop apart in order to conduct a full repair.
Very short and well-explained video.Thanks a lot.
Best how to guide ever. Had me giggling. Commenters need to realise there’s deliberate added comedy value. Thanks 😂
I love your videos and your tools
as I am lefthanded I only have this left-handed clamps - now I have to find and get some right-handed for real bad ass work!
paul wyleciol you could problem get three or four righties in trade for just one of your left handers
I hope, dear friend, I hope!
As well as for my two lefthanded leatherman's, with which I repair most of my cars - as I have one metric and one of those illegal ones, like you bad ass seem to use)
I don't have any left-handed Vice Grips and was wondering if I could just flip the unit over and use my right-handed (standard) Vice Grips??? Thanks!!
LOL... you made my day!!! I needed this
+Dru Bradley you are very very welcome !
Thank you very much, Sir, for your expertise !
So awesome. I get the humor. But i actually understood this while laughing at the dame time. Thank you. Definitely subscribing.
Very nice torque wrench ..... that is a must have tool.
you are my hero awesome thanks a lot
I love this guy
Excellent video, first of yours I've watched. I'm hooked, found you through Mustie1, I get the tools thing and find it incredibly funny. It's a nice counterpoise to the rest of the video, which is incredibly informative, and very well done. Thanks, I've some catching up to do...
I'm now totally inspired to make another video. thanks both you guys for watching :)
Loved it. The right tool is the tools you have!
Funny as hell. Loved this.
Great video!
LMAO!! Clearest and funnest turbo rebuilt tutorial on RUclips!! Thanks!
haha! feel free to share it. :D thanks for watching !
Sir, i really need those left hand vice grip?? many thanks, you are bad ass!?
your Civic must be badass!
+Bike Boobs Just need to clean it up a bit. I had to cut a hole in the hood .... so it can clear my turbo ;)
I find the amount of people who don’t understand that this is comedy quite shocking. 😂😂😂
love that lefthanded vice-grip and top quality torque wrench ha ha. keep up the goood work
Mike- Would have been nice to get a heads up on where I should spend my hard earned gold coins on that new fangled Torque wrench. I'm sure Joes Garage would have one layin' around.
i have a video on how to make it
I love how you leave out the hard parts... actually getting the bolts off.. but hey very detailed and very good video!
Enjoyed your video, very helpful. I found it funny too using vice grips on nuts, and the dishwasher for parts!
That was pretty funny. 😊 Also very informative!
We miss you Ichiban
happy holidays my friend!!!
+johnnycactus0 and a bad ass Happy Holidays to you and Mrs. Cactus !
Tool selection on point!
love the video...thumbs up :)
Hi Ichiban! I have 2 questions:
-what other kind of grease should I use to reassemble? What's "assembly grease" similar to?
-can you tell me the torque spec of the compressor nut?
Thanks, first time here on your channel!
On the Canadian turbos, do you need to use metric vise grips or are the sizes close enough for standard ones ?
oh yes! Turbochargers are precision devices that require the proper specialized tool.
i have a question, can i exchange a little bigger Turbo in my stock F6A Turbo Engine(660cc Suzuki-Kei)? the current one is much small to repair, it has been blown twice wit in a year.. i am thinking to do some customization, can any one let me know?
Hassan ALi. Drop entire bike in ocean...buy a real bike
thank you so much would have never been able to do this on my own.
Where did you buy that torque wrench? I've been looking for a left handed metric torque wrench for years
+Christian Parish watch my youtube video on how to make one :D
Makes me want to rip the turbo off my car and overhaul it immediately. And it ain't even broke. Thanks.
Your choice of tools seems heavily inspired by McGyver though.
maybe rebuild it every other day
Lol ! I'll just add another turbo every month without replacing the previous one. In three days I'll go 250 mph.
have you seen those multiturbo compound setups with a large and small turbo plumbed in series? one to spool quick and the second monster for top end? I might add that to my Honda minitrail
Sounds like a plan to me. Go for it.
Gabor- Or maybe McGruber.
"Make sure to use the right tool" xD
I love your Videos, ichiban.
Since 42 years, I work on motorcycles, it seems I did everything wrong, using professional tools
the proper tool is the one that get's the job done :D
May you please share the source to buy repair kit for Ford fusion 2015 1.5 L turbocharger
thanks for the info. i have to rebuild a supercharger and this video will be so helpful..
i love superchargers
Loving those precision tools man !!!
only the best!
My mechanic installed a new turbo Cartridge but is loosing exhaust at the housing connection. He said that he tightened the bolts right . Do you have any suggestions why is not sealing right?
mechanic should back up his work and make it right for you. maybe he left out a seal or gasket, it was not loosing exhaust before he put spanners to it, right?
@@IchibanMoto my Cartridge needed replaced. The problem is that there is not a gasket on the exhaust side of the turbo.
So im not sure how it supposed to do a thight seal.
( is the turbo from a Sprinter 2009)
"Thrush washer"................ had to pause video at this point as rollicking laughter was inducing blackout like sensations.
I actually only watch your videos to hear you say 'badass'. It cracks me up every time!
+David Lowe should I sell mp3's and ringtones on iTunes ? ;)
Anyone know where I can get genuine rebuild kit for a GTA2052V Garrett turbo?
Awesome video man fhanks
So if the turbine housing isn't in a giod position can u just loosen those 5 or 6 screws on the back and turn it to where I need the outlet to b is that what I ment by it can be clocked 360 degrees cuz I'm shopping for turbos and from what I can tell how mine is set up the outlet on the turbine side would be like right up against the block hopefully u reply fast thanx and great video lol
The integrated wastegate actuator required it be in that place, however the housings can be rotated, yes 360
Thanks for your video
Is the left handed vise grips a metric, standard or universal?
yes
After following this, I gave it a spin up using my harbor freight pancake compressor. It smelled minty fresh. Only one question: how many torks do I need to compress the thrush washer?
Badass..... I just realised that i have blue polishing compound that i have used to polish my teeth to pristine condition....... but anyway i smashed one of my teeth, so can i use the blue assembly lube to fix it ? Does it have any adhesive titanium molecyles to properly make that teeth badass ?
+TT GarageRat the lube is to ensure smooth assembly and protects the turbo bearing surfaces on initial start up. It can take the oil a second or two to build up proper pressure, and you don't want premature wear of brand new bearings. For your tooth, you can just use dental grade oral adhesive
I think i can fix my turbo now thanks alot for the video
Thanks for the white loctite tip.I've been using it on everything.
i love your tools and the whit loctite is really badass. Greetings from Germany your videos are awesome
thanks so much for watching and sharing Chris !
I have hks gt rs rb25 turbo 2530 kai how can i order rebuild kit
Would you be able to do this on my ej25 20g turbo
Excellent improvisation- please put up a video on the torque wrench and the ultrasonic cleaner. Just wondering, do you have a home-brewed turbo balancing machine as well? How did you balance the rebuilt core?
i do have videos on both the torque meter and the ultrasonic / i still need to build a balancer so in the meantime, i had to have it balanced
Thanks, good video, while many commenters want to snip about tools and balancing turbos are pretty simple machines.
where did u find that assembly lube & wut kind...thx
Would you lock tite all bolts/nuts or just the compressor wheel nut?
it really depends on the make model. some kits the bolts come with lock washers, some with locktite on the compressor housing. also i use anti-seize on the turbine side threaded studs
love this channel
+Tad Reinsch thanks for watching Tad!
Sir, You and Master Ken need to team up, his Kill Face and your left handed vise grips = Make my day!
Ha ha ha awesome video, I'm going to rebuild my turbo exactly the way you did.
Weird. That looks just like the turbo on my GF's old Vespa. I didn't know you could use a two stroke turbo on a CB750. I learn something new every day around here!
Is it okay if I use white assembly paste on my blue '02 Kawasaki ex250 RR high output turbo? Someone told me I could ONLY use the blue with tartar control on the '01 thru '08 Kawasaki because build up at the red-line was an issue, so i needed to clarify before I make my ninja truly Ichiban "bad ass".
+Major Pain If you have plumbed cooling water through the bearing housing, you might get away with white. If not, you certainly want to control the tartar build up.
+Ichiban Moto Thank you thank you thank you! I was worried my super powered bike was going to suffer from engi-vitis.
+Major Pain You can only use the blue if your name is Floss
after I get the funny spot,now I can fully understand your video. funny and useful. Love your video,thanks.
keep making more! I give you 50 at 5 Ichiban Moto sticker!
+郭牧楠 thanks for watching and sharing !
Can you tell me where to find Chevy beat desiel turbo replacement kits and can you make a video on it....lobe ur work
I have 2 turbos that need rebuilt. How much does it cost?
🤣🤣🤣🤣 perfect tool set bro even the “white lock tight” 🤣🤦🏻♂️💪🏽
amazing ichiban
Perfect!
This video made it seem so much more easy. You earned my subscription. I can say I was scared to do this. Now to rebuild my Subaru turbo that's been screaming at me for weeks FIX ME! while I periodically pickup and put down the rebuild kit. Yelling NO!!!! I'm not qualified!!