Moin, you made a fine RIG there I'm more of a hobby at ACC at the Series X and just looked at what material had accumulated over the years. I built my RIG completely out of wood and this is what it looks like now. It only has to be filled and then painted black with orange accents. However, it has become quite massive (1.72 mx 1.20 m). I built in the Gamechair as only I am allowed to sit in it. So he didn't have to go on any rails. Unfortunately, the options on the XBox are very limited. I took the 3 vibrators + control from an old massage mat, screwed 2 of them into the seat and the third to the pedals. Connected via the subwoofer of the Gamechair. Not as optimal as on a PC, but the result is astonishingly good. Engine vibrations, curbs or gear changes are simulated well. I can proudly say that I have made something fantastic for me out of "junk in the basement". Except for a few corners, I had everything lying around. I think it's great when someone thinks about it and builds something for themselves. Anyone can buy ... 😄 Definitely a nice video of you with a great result. Here is a very short video of my RIG in its current state. ruclips.net/video/BuATCe7t4Xs/видео.html
i have watched all the 3 parts and honestly it's cool rig and i really like the way you're using the tools and thanks again for your ideas of working and it does help me a lot in my rig . i'm also trying to figure out how can i get the peace of papers that you're using to measure while cutting the boards , i appreciate to know more from you. Thanks
@@autoexistence8902 I see it and will watch it now. Last question, did you have any trouble with the pedals/wheel ratio? I've seen some complaints that the wheel is too close when the seat up rolled up to work with the pedals
Well since I built it for myself, I installed everything so it’s comfortable for me. I could see how it could be too close if just built without making any adjustments. However I don’t have much issue because I don’t need to move the seat for myself.
como hago para adquirir los plano? soy de Argentina pero no puedo comprar en la pagina. alguien me podría ayudar? me gustaría hacer este simulador. gracias.
Moin, you made a fine RIG there
I'm more of a hobby at ACC at the Series X and just looked at what material had accumulated over the years.
I built my RIG completely out of wood and this is what it looks like now. It only has to be filled and then painted black with orange accents.
However, it has become quite massive (1.72 mx 1.20 m). I built in the Gamechair as only I am allowed to sit in it. So he didn't have to go on any rails.
Unfortunately, the options on the XBox are very limited.
I took the 3 vibrators + control from an old massage mat, screwed 2 of them into the seat and the third to the pedals. Connected via the subwoofer of the Gamechair. Not as optimal as on a PC, but the result is astonishingly good. Engine vibrations, curbs or gear changes are simulated well.
I can proudly say that I have made something fantastic for me out of "junk in the basement". Except for a few corners, I had everything lying around.
I think it's great when someone thinks about it and builds something for themselves. Anyone can buy ... 😄
Definitely a nice video of you with a great result.
Here is a very short video of my RIG in its current state.
ruclips.net/video/BuATCe7t4Xs/видео.html
Great idea bolting the two uprights together and cutting them out at once! Can't wait for part 2.
thanks Brian! glad to see you tuning in still! hope you are relaxing!
Looking good so far... I’m considering building 2x of these for my son and I. Thanks for the video and looking forward to part 2.
Thank you!
Doing the same gonna link ours together.
Safety-glasses are something you should invest in. Have you ever gotten a piece of small, sharp plywood in your eye? It's not fun.
Very nice, do you have the measurements?
Really well done video and only 2 thousands subs man we need to get him to 10000 so he starts getting paid
Cool project. Would like to build two of these for side by side fun. Maybe an adjustable seat track from an old car if you dont already have one.
I have some seat sliders i recycled from my pvc racing rig! Soon i will install them and post a video when i do!
Your doggy looks exactly the same as my childhood doggy (except my one had brown over his eyes) and it brought back so many memories.
Also great vid
Cool video man!
Great vid thanks ✌🏻
thank you for sharing this i need to ask about the scheme of this project ???
Cool stuff. Why the dislikes?
i have watched all the 3 parts and honestly it's cool rig and i really like the way you're using the tools and thanks again for your ideas of working and it does help me a lot in my rig . i'm also trying to figure out how can i get the peace of papers that you're using to measure while cutting the boards , i appreciate to know more from you.
Thanks
you can order the plans here www.ricmotech.com/RS1_DIY_Cockpit_Plans_p/rmt-rs1-diy.htm
Try not to cut towards yourself when using a saw. But nice video and will watch them all.
cool i think you have potentcial to get big just need to make more vids!!
can you share the measures and the cut dimensions?
You can buy them online at ricmotech
I would like to know what Ryobi tools you use in the video. Is it possible to let me know the modelnumbers?
Great videos.
Regards
Robert
Sweden
Hello, do you have the plan of your simulator please
CUTE DOGGO
4 years later, how did it hold up?
Check out my latest video, still using it
@@autoexistence8902 I see it and will watch it now. Last question, did you have any trouble with the pedals/wheel ratio? I've seen some complaints that the wheel is too close when the seat up rolled up to work with the pedals
Well since I built it for myself, I installed everything so it’s comfortable for me. I could see how it could be too close if just built without making any adjustments. However I don’t have much issue because I don’t need to move the seat for myself.
Olá onde eu consigo compra o plano de corte do projeto favor
como hago para adquirir los plano? soy de Argentina pero no puedo comprar en la pagina. alguien me podría ayudar? me gustaría hacer este simulador. gracias.
Where can I get these plans at?
Ricmotech
Were did you buy that seat
I just bought it on eBay a long while ago
Wondering what the dimensions on this are ? Looking to build one meself but would have to go in a compact space
you have to buy the plans from ricmotech's website
What wood standard ply?
MDF
Friend you have the RS1 rig file in pdf
Link the seat
amigo buenas tardes me podrias mandar las medidas xfavor
*Willyrex (?!) xD*
Is it sad that I spent most of the video talking to your dog?