i ran one from Dallas to Austin no coolant the exhaust manifold was glowing red and i shit you not it ran the next day no issues besides the known blown head gasket
Two of the most genuine Christian guys I have ever met. Thanks for dusting the old girl off and getting her going again. A long road ahead but that’s how memories are made. Thanks guys for the smiles this week.
The ignorance of standing right in front of the spark plug holes knowing there’s fluid in there and it exploding in his face had me rolling. I don’t think I’ve ever laughed this hard. Dudes a trooper for getting soaked not once but multiple times just to get the shot😂
'79 3/4 ton 4whldr Camper Special. You have a jewel of a truck. The 300 6banger is one of the best simple motors Ford ever built. The trans set-up will fit 289, 302, 351 C, and 351 Winsor blocks. If you put a throttle-body fuel injection system on it you'll be pleased with both mileage and power. I don't remember if the motor mounts will interchange. Generally, the C-specials had 4.10 gears because they were built to haul loads. A frame change from the Hi-Boy Fords started in late 1977 so this one has a wider rear axle, a reverse-rotation front differential with integral power-steering instead of the old ram-assist unit. To lift this truck to Hi-boy specs requires a new set of positive-arc springs for the pre-1976 4x4. Then you must install a dropped drag link and change to longer shocks. Then you can remove the anti-sway bar from the front and the truck will work as it should with a 4" lift. Once accomplished it may require a slightly taller block under the rear springs to set the rear height to your liking. Other than that are just minor adjustments such as repositioning brake-line brackets. I built up a number of old Fords like this and earlier. The frame is unbeatable and outclasses in strength all others. That's why Bob Chandler used them on his early "Bigfoots".
Let’s Go From Kentucky. I have a 1985 F-150 with basically the same exact 300 engine and a NP-435 4 speed transmission.. My engine quit running a couple of years ago and a local garage told me that my engine was bad. I think that it was very odd that my engine always had a great oil pressure and no knocking. They said that after a compression test that out of 6 cylinders that I only had 1 cylinder making any compression. After some serious consideration on my part, I decided that I wanted my truck brought back home. Several years ago I had another 1985 Ford truck that had a bad cylinder head that smoked just like the truck was in the video with the white steam coming through the exhaust pipe. One thing to remember concerning the removal of the 300 cylinder heads is that you must use the staggered removal of the head bolts or the cylinder head will possibly warp if you don’t go through the process. I definitely want to follow your progress on this truck because of the similarities to my 1985 Ford truck. At least everything was very well lubricated after the engine broke loose.
Let’s go Landon, 🤓, I had the 1979 F 150 with 351 M lock out hubs Orange & white with Lock Box on side, automatic, These were nice pickups and would still do everything as most new ones today
Man glad you had si much confidence. We didn't. Check out this other inline 6 video. ruclips.net/video/UxShqsW5nZQ/видео.html Thanks for comment and support
My Uncle had a 79 ford econoline starcraft conversion van ( camper ) He bought it new... ( had it on the rd from 79 to 1995) canadian vehicle Over 840,000km , oil changed every 5000km.plugs every 50,000km. Only believed using FORD OIL AND FORD FILTERS also only motorcraft plugs.. NO ADDITIVES oil/gas.. Ran premium gas...that van ran like an absolute champ...they had it shipped overseas..he toured all of europe and the US, also all over Canada, finally the body rotted and was left in the back yard... A gent bought the van..used engine for a lobster boat... And it ran for 3 seasons before a bearing turned and it started knocking... The 300 straight 6 was fords absolute toughest engine..however harder on gas than his 1978 460 camper special he owned also. love your vids. Keep the old rigs out of the fields and on the roads !
This is so cool. Guessing your up north somewhere by the lobster boat and rust comments. Love it man so glad you shared. Thanks for the comment and support.
@@JMRRebuilders im in Nova Scotia Canada..we have rough winters.and rd salt...together...vehicles get rotted out. Yup his van was so rotted. It had to be towed on a flatbed. The frame broke on the tow truck when it was taken away.but the drivetrain was all functional
I had the exact same truck when I was a teenager. It was old then. As soon as I seen this truck I had to watch the video. Those straight 6 weren't the fastest but they had plenty of torque. Mine had the 3 in the tree u could drive all day long in second gear.
The first year with the stock rectangular headlights. It was offered as an option in 1978. I had them on my 1978 F-150 with a 460. The original owner bought it factory direct from Dearborn then drove it to Seattle and put it on the barge to Wrangell, Alaska. 4:18
Good video love the Fords from the 70s I owned a74 Ford truck in the 90s I miss that truck a lot, the let's go commets are too much though it really gets annoying 😢
honestly brother at this point if you dont like the lets go then this aint the channel for you. It isnt gonna change. Thanks for the comment and support. Check out our other content and one more LETS GO LANDO
NUNCA AVIA MIRADO TANTA EMOCION DE COMO GRANDES AMIGOS DISFRUTANDO DE LO QUE ASEN COMO NINOS CON SUS MEJORES TRAVESURAS ANIMO GRANDES AMIGOS 😅😅😅😅😅BIEN ECHO
Man you REALLY have to abuse one of those inline 6 to blow a head gasket. I remember growing up and the one we had ride forever with minimal maintenance. Man I miss that old truck.
I'm binge watching all your guyses shows right now as far as I've seen in this one so far I would Cummins swap the hell out of that truck in a heartbeat
The let’s go meter kept making me laugh! When u guys want ur welcome to my shop in nc any time love this channel love god love turning wrench’s love atvs. I got can ams I’m working on for customers. But I just bought a kfx700 04 ran when parked. Was told clutches broke and need to be replaced needs battery carbs gone thru and slot of love looks like she’s sat for some time at least a year or so idk 🤷♂️
Y'all kind of caught this Certified Old Goober off guard with this truck. Until I watched this video, I had only seen two other 250 '79s with inline 6 cylinders. Not that there was anything wrong with those trucks from the farmers point of view but for real grunt when real grunt was needed for towing hay trailers/cattle trailers, etc. the 360cid up to the much-criticized diesel engine were preferred for serous loads/towing purposes. By the way, the 300cid engine was a real work horse. I've seen 300s out last the vehicles they came with from the factory and two or more after that before they had to be completely rebuilt or sent to the scrap yard.
heck yeah love this. Well now you got 2 of our videos watched gonna have to keep watching lets go. Yeah had several of the inline 6 love them things just aint gonna get gas milage or fast. But oh well.
With a truck like this, I’m surprised it doesn’t have a V8. You guys should have kept track on how many times Landon was said, lol I think Landon was said more than, Let’s Go.
Now this is wild this is another truck my father had and it was green. He traded it in for the 85 f250 in my videos. He still has the 85 but just a plow truck these days. Not sure if you can verify he claimed the bed or body was galvanized metal under the paint
Now put a bottle of Lucas high mileage, sea foam fuel treatment, sea foam in the oil, sea foam in the vacuum lines and anywhere else you can think of 😂😂
It's crazy it's not rusted till no tomorrow. Especially with the side was in the woods passenger side. But the pine straw was mice, rats and squirrels. Mainly squirrels it looks like.
Hola muchachos muy bueno el vídeo si pueden traduzcan en español castellano .lo saludo desde argentina .lindo sus videos .solo el idioma .lo lo entiendo 😂😂.saludos 👍💪🇦🇷👋
Let's go brother that's super cool glad you have that memory. This one's not for sale. Thanks for comment and support brother. Check out our other content
Las ford f100 son tanques de guerra inmortales, con un amigo hacemos auxilios mecánico en los campos y tuvimos que poner en marcha una f100 deluxe del 79 que estaba en un granero desde el año 86 y en mediodia ya estaba laburando la chata, hay que sacarse el sombrero con las ford
@@JMRRebuilders Here the landscapes are beautiful, the economy is very bad, we Argentinians want to live in the United States, there for 100 dollars you can buy a tool here they are worth more than 700 dollars and the pay for the jobs is bad, enjoy your country friend that is a privilege
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Check out this truck we got running and driving ruclips.net/video/r04yRSoksYs/видео.html
@@JMRRebuilders I watched it and it was good
HECK YEAH BROTHER thank you
Them old 300 inline sixs are tougher than Mike Tyson in the 80s.
Now that is Flipping tough. Let's go. Thanks for the comment and support
i ran one from Dallas to Austin no coolant the exhaust manifold was glowing red and i shit you not it ran the next day no issues besides the known blown head gasket
Two of the most genuine Christian guys I have ever met. Thanks for dusting the old girl off and getting her going again. A long road ahead but that’s how memories are made. Thanks guys for the smiles this week.
Heck yeah brother we had an absolute blast. Thank you so much for the kind words it means alot. Thanks for the comment and support.
Agreed
The ignorance of standing right in front of the spark plug holes knowing there’s fluid in there and it exploding in his face had me rolling. I don’t think I’ve ever laughed this hard. Dudes a trooper for getting soaked not once but multiple times just to get the shot😂
Heck yeah brother gotta get the content brother. Love that it brought you some joy. Thanks for comment and support.
The big spurt was redirected by the hood.
Had me dying also. 😅
'79 3/4 ton 4whldr Camper Special. You have a jewel of a truck. The 300 6banger is one of the best simple motors Ford ever built. The trans set-up will fit 289, 302, 351 C, and 351 Winsor blocks. If you put a throttle-body fuel injection system on it you'll be pleased with both mileage and power. I don't remember if the motor mounts will interchange. Generally, the C-specials had 4.10 gears because they were built to haul loads. A frame change from the Hi-Boy Fords started in late 1977 so this one has a wider rear axle, a reverse-rotation front differential with integral power-steering instead of the old ram-assist unit. To lift this truck to Hi-boy specs requires a new set of positive-arc springs for the pre-1976 4x4. Then you must install a dropped drag link and change to longer shocks. Then you can remove the anti-sway bar from the front and the truck will work as it should with a 4" lift. Once accomplished it may require a slightly taller block under the rear springs to set the rear height to your liking. Other than that are just minor adjustments such as repositioning brake-line brackets. I built up a number of old Fords like this and earlier. The frame is unbeatable and outclasses in strength all others. That's why Bob Chandler used them on his early "Bigfoots".
That's alot of super awesome information. Totally appreciate that and the comment
Let’s Go From Kentucky. I have a 1985 F-150 with basically the same exact 300 engine and a NP-435 4 speed transmission.. My engine quit running a couple of years ago and a local garage told me that my engine was bad. I think that it was very odd that my engine always had a great oil pressure and no knocking. They said that after a compression test that out of 6 cylinders that I only had 1 cylinder making any compression.
After some serious consideration on my part, I decided that I wanted my truck brought back home.
Several years ago I had another 1985 Ford truck that had a bad cylinder head that smoked just like the truck was in the video with the white steam coming through the exhaust pipe. One thing to remember concerning the removal of the 300 cylinder heads is that you must use the staggered removal of the head bolts or the cylinder head will possibly warp if you don’t go through the process. I definitely want to follow your progress on this truck because of the similarities to my 1985 Ford truck. At least everything was very well lubricated after the engine broke loose.
@TheIronDuke502 that's so awesome. Maybe we can come ip there and do a will it start some day. Thanks for comment and support
Let’s go Landon, 🤓, I had the 1979 F 150 with 351 M lock out hubs Orange & white with Lock Box on side, automatic, These were nice pickups and would still do everything as most new ones today
Heck yeah brother. This thing is sick for sure. Thanks for comment and support.
I knew it would be unstuck! The engine is very strong.
Man glad you had si much confidence. We didn't. Check out this other inline 6 video.
ruclips.net/video/UxShqsW5nZQ/видео.html
Thanks for comment and support
Yo tengo una ford f100 motor 3.6 seis cilindros año 1977 y jamas de dejo a pie , son eternas , excelente videos saludos desde Argentina
Thanks brother. That's awesome. Thanks for comment and support. Check out our other content
vamos argentina aguante la f100
My Uncle had a 79 ford econoline starcraft conversion van ( camper )
He bought it new... ( had it on the rd from 79 to 1995) canadian vehicle
Over 840,000km , oil changed every 5000km.plugs every 50,000km. Only believed using FORD OIL AND FORD FILTERS also only motorcraft plugs.. NO ADDITIVES oil/gas.. Ran premium gas...that van ran like an absolute champ...they had it shipped overseas..he toured all of europe and the US, also all over Canada, finally the body rotted and was left in the back yard... A gent bought the van..used engine for a lobster boat... And it ran for 3 seasons before a bearing turned and it started knocking... The 300 straight 6 was fords absolute toughest engine..however harder on gas than his 1978 460 camper special he owned also. love your vids. Keep the old rigs out of the fields and on the roads !
This is so cool. Guessing your up north somewhere by the lobster boat and rust comments. Love it man so glad you shared. Thanks for the comment and support.
@@JMRRebuilders im in Nova Scotia Canada..we have rough winters.and rd salt...together...vehicles get rotted out.
Yup his van was so rotted. It had to be towed on a flatbed. The frame broke on the tow truck when it was taken away.but the drivetrain was all functional
That's so cool. I love it.
I was going to watch this whole video but said let’s go and watched victory out door service
@L15a5haw ya not gonna happen bud. Thanks for comment and support. Check out our other content
Will pass
I have a 93 six inline they run really good great content God bless you brothers!
Heck yeah brother thank you for the comment and support. That is awesome for sure they are sweet.
I knew it would get unstuck cuz you guys are talented. Psych! Cuz the video is over an hour. No but you guys are talented.
Heck yeah brother let's go. She.fought us for sure but we got it. check out our other content. Thanks for comment and support
Be careful dumping oil into to the cylinders I've seen it hydrolock and bend the connection rods
Yeah good point brother. Thanks for comment and support. Check out our other content
I had the exact same truck when I was a teenager. It was old then. As soon as I seen this truck I had to watch the video. Those straight 6 weren't the fastest but they had plenty of torque. Mine had the 3 in the tree u could drive all day long in second gear.
That's so flippin awesome bet ya miss it don't you? Thanks for the comment and support
Awesome video enjoyed watching love these classic Dent sides . You guys are great Let's Go
Heck yeha love it brother thank you for the kind words. Thanks for comment and support. Check out our other content
Good Godly people with good quality videos glad i found this guy
Heck yeah lets go. Thanks for the comment and support.
Ryan sounds like John C Reilly when he played on step brothers 😂
Heck yeah love me so john c baby. Lets go brother. Thanks for comment and support.
Brother that's a nice truck, can't find one like that anymore, great video 👍✝️
Heck yeah brother completely agree. She's pretty sweet for sure. Thanks for comment and support
Nice job getting an Old Ford running again! Definitely worth putting some coin into it.
Heck yeah she's pretty sweet. Thanks for comment and support
That aerokroil is great stuff. I sprayed some in each cylinder of a stuck 302 and it freed it up in a couple of hours.
@topher8634 yeah it is some amazing stuff. We tried it on the red f100 we did before this and didn't help her. Thanks for comment and support
You are doing one hell of a job on that truck its gonna run
Well won't be for a lack or effort. Check out our other content let us know whatcha think
The first year with the stock rectangular headlights. It was offered as an option in 1978. I had them on my 1978 F-150 with a 460. The original owner bought it factory direct from Dearborn then drove it to Seattle and put it on the barge to Wrangell, Alaska. 4:18
Well that good to know. Thst poor trucks gone now. Probably rusted back into the earth. Thanks for comment and support
everything yall did was professional. new sub yall👍🏿
@Carloss80k hey man that's super awesome. Thanks for the kind words , comment and support. We really appreciate it
Good video love the Fords from the 70s I owned a74 Ford truck in the 90s I miss that truck a lot, the let's go commets are too much though it really gets annoying 😢
honestly brother at this point if you dont like the lets go then this aint the channel for you. It isnt gonna change. Thanks for the comment and support. Check out our other content and one more LETS GO LANDO
You guys are great. Lol. Never stand in the path of spark plug holes. Lol.
Thanks brother we really appreciate that. Thanks for comment and support.
For a second I thought it was Messi working on truck! Good video guys!
Now that is a new one for sure brother. Love it. Let's go
This is gonna be a great episode! Keep the ford content coming brother!
Heck yeah brother it was insane for sure. Thanks for comment and support
Good job guys I like to see What are you doing
Thanks brother. It fought us for sure. Thanks for comment and support. Check out our other content
nothin better then an old inline six- so much room to work amazing ;-)
Let's go brother. She's a runner for sure. Thanks for the comment and support
New subscriber here. Of course I knew it was going to run. It's a Ford straight six. Pretty much indestructible. Love the video!!!!!
This is awesome love the optimism. Good stuff thanks for subscribing check out our other content. Thanks for comment and support.
Those trucks that havent started in years probably wake up like “WOAH WOAH WHATS GOING ON!? IM ALIVE!!!??”
Had the same truck, well, a 78' with a 300 I6, was the best truck I ever owned, I wish I never sold it!
Heck yeah man that's super cool. It happens brother. Thanks for comment and support. Check out our other content
Straight up amazing track. Awesome find rare
heck yeah brother she is sweet for sure. Thanks for the comment and support
Great guys. Enjoy the videos
Heck yeah man that's super cool and thanks for watching and supporting us. We def appreciate it
Channel better than ever!
HECK YEAH BROTHER THANK YOU SO MUCH
Awesome guys I love old trucks...
Heck yeah of you love old trucks we got a ton on our channel. Check out our other videos. Thanks for comment and support
I had no doubt that 6 would come loose. And even if it didn't, the truck is clean and solid enough,it deserves a rebuild or another engine.
Heck yeah love that confidence. That's so awesome. Thanks for taking the time to watch ot and comment. We appreciate the support
Great video!!! Runnin and riding good thats a dream truck for sure!!!!!what a babe
Heck yeah brother she is a pretty sweet truck and was such a blast. Thanks for comment and support
NUNCA AVIA MIRADO TANTA EMOCION DE COMO GRANDES AMIGOS DISFRUTANDO DE LO QUE ASEN COMO NINOS CON SUS MEJORES TRAVESURAS ANIMO GRANDES AMIGOS 😅😅😅😅😅BIEN ECHO
Love this truly appreciate the kind words. Check out our other videos.
for sure Ford inline big 6 was a damn good engine back in it's day with plenty of torque!
Yeah they where consistent workhorse. Thanks for comment and support brother
Nice job sir Nice show cool FORD 😃👏👏👏👍👍👍👍
Thank you we tried our best. Thanks for comment and support
Good job guys
Thanks brother
I wonder if his name is Landon, LETS GO!
Well I think i may have said it a few times but ya it's landon. Thanks for comment and support brother. Check out our other content
Man you REALLY have to abuse one of those inline 6 to blow a head gasket. I remember growing up and the one we had ride forever with minimal maintenance. Man I miss that old truck.
Yeah they are built for taking a beating for sure. So cool you grew up with one. Thanks for the comment and support
That would be a good truck to rebuild & do a fuel injection kit on. Just an awesome truck.
Yeah be kinda neat for sure. She is a sweet truck. Thanks, for comment and support. Check out our other content.
@ did y’all fix it up or is it for sale?
Its not for sale. However we will be going back and getting it back on the road soon. Thanks for comment and support.
That Ranger is coool looking
Heck yeah brother it's super cool. Thanks for comment and support
That's a beautiful truck with out the yellow jackets lol
It truly is a sharp truck. Thanks for comment and support
You guys are spoiled down there with solid body's, up here in ohio the new one come equipped WITH RUST
Yeah i couldn't live up there to much cold and way to much rust.
I'm binge watching all your guyses shows right now as far as I've seen in this one so far I would Cummins swap the hell out of that truck in a heartbeat
Those manifolds work great, as long as you have headers to allow it to breathe.
Heck yeah she does but they may have some holes in them. Thanks for comment and support
The let’s go meter kept making me laugh! When u guys want ur welcome to my shop in nc any time love this channel love god love turning wrench’s love atvs. I got can ams I’m working on for customers. But I just bought a kfx700 04 ran when parked. Was told clutches broke and need to be replaced needs battery carbs gone thru and slot of love looks like she’s sat for some time at least a year or so idk 🤷♂️
I love some 4 wheelers for sure. Can always use one. LETS GO. Glad you enjoyed the meter.
@JMRRebuilders Let's Go JMR!
Y'all kind of caught this Certified Old Goober off guard with this truck. Until I watched this video, I had only seen two other 250 '79s with inline 6 cylinders. Not that there was anything wrong with those trucks from the farmers point of view but for real grunt when real grunt was needed for towing hay trailers/cattle trailers, etc. the 360cid up to the much-criticized diesel engine were preferred for serous loads/towing purposes. By the way, the 300cid engine was a real work horse. I've seen 300s out last the vehicles they came with from the factory and two or more after that before they had to be completely rebuilt or sent to the scrap yard.
heck yeah love this. Well now you got 2 of our videos watched gonna have to keep watching lets go. Yeah had several of the inline 6 love them things just aint gonna get gas milage or fast. But oh well.
300 6 cylinder the best engine ever made…had 3 of them…
That is awesome they are def well loved. Thanks for comment and support
Couldn’t watch this due to the guy asking stupid questions that were oblivious conclusions and saying Landon,Landon Landon and Let’s Go Landon!
Let's go lando. Thanks for comment and support
I subscribed as soon as it started
Heck yeah thank you very much.
Dude the lets go line need to give it a break. Youre sounding like kamala harris with the unbounded line.
Now that's funny. LETS GO. Thanks for comment and support
I love this type of thing 😍
That’s awesome sir thanks for watching and the support!
I love this model ford.
Heck yeah brother let's go. Thanks for comment and support
White smoke is a sure sign of a head gasket brothers
Yeah man unfortunately you may not be wrong.
suspense😜😜😜gasoline supply love it😇😇😇
Heck yeah thanks for the comment and support.
@@JMRRebuilders 🥰🥰🥰
With a truck like this, I’m surprised it doesn’t have a V8.
You guys should have kept track on how many times Landon was said, lol
I think Landon was said more than, Let’s Go.
Let's go. If you go back and count them I'll send you a free piece of merch. Thanks for comment and support
@JMRRebuilders
Your On
36:00, it did have spark.
Landon, 68
Vs
Let's Go, 54
Vs
Ryan, 4
Send me your shirt size and address
Ryan@jmrrebuilders.com
Absolutely love this thanks brother
@@JMRRebuilders Got the shirt.
Thank You
First time I see an F250 with V6 in line engine
Apparently they were actually common. Thanks for comment and support
Just subscribed. What a find.
👍🇺🇸🦅
Heck yeah brother thank you so much for the sub. She was a sweet truck for sure. Check out our other content. Thanks for support and comment
Now this is wild this is another truck my father had and it was green. He traded it in for the 85 f250 in my videos. He still has the 85 but just a plow truck these days. Not sure if you can verify he claimed the bed or body was galvanized metal under the paint
It is a repaint orignal color was creme.
I think all videos should have Landon hes funny
Well that's the plan thanks for comment and support
Now put a bottle of Lucas high mileage, sea foam fuel treatment, sea foam in the oil, sea foam in the vacuum lines and anywhere else you can think of 😂😂
Let's go sea foam for the world. Thanks for comment and support.
@@JMRRebuilders Huh? I love your channel what are u talking about
@@joshuavillalobos8218 it was supposed to be a reply to someone else. Sorry. I'll remove it.
@@JMRRebuilders lol ok
@@JMRRebuildersY'all r awesome bro ur good lol
the lets go thing was to much but like the truck
Thanks for comment and support. Check out our other content
Let's Go! From Texas.
Heck yeah brother love it. We were just in Texas. Thanks for comment and support
Exelente vehículo es lo mas . Que tengan mucho éxito disfruten...💪✨💫🌟✨✨🇦🇷🇦🇷😲
Thank you for the comment and support. Check out our other content.
I'm liking that 79
Heck yeah brother. She's pretty sweet. Thanks for the comment Nad support
More than 10 lets go...OCD!!
Yes i believe there was a counter on this one. Thanks for comment and support
Every single thing the guy with glasses says is a question. Ive never heard anyone in my life ask so many questions. LOL
Thanks for comment and support. This is the guy with glasses
I absolutely LOVE Ford's
Heck yeah brother we gotta a ton of ford content enjoy. Thanks for comment and support
FORD 78 😍 MY DREAM SALUDOS CARROS MJ 🇨🇷
That's awesome brother. Thanks for comment and support
I have confidence in Brandon.
It's landon but thanks for the comment and support. Check out our other content
Nah man its Brandon
Good team job man
Heck yeah brother. Thank you for the support and comment
They are great I got one on my slant six
Love it
The Ford i6 is awesome.
She was a pretty great engine
Someone put some time into that truck!
Yeah she was a really sweet truck
Estuvo chido El video viejones
Heck yeah brother pretty sweet truck for sure. Thanks for comment and support. Check out our other content.
I think you need to do a Landon count or bonus round of what are we doing now
Well you can def rewatch and count each and let us know. Thanks for comment and support. Check out our other content.
Letssssss goooooooo ❤❤❤❤
Heck yeah brother lets go. Thanks again for comment and support.
LETS GO‼️
Heck yeah brother let's go. Thanks for comment and support.
This video is very cool 😎 😂
Thaank you we appreciate the support and comment
It's crazy it's not rusted till no tomorrow. Especially with the side was in the woods passenger side.
But the pine straw was mice, rats and squirrels.
Mainly squirrels it looks like.
You are so right. Crazy it isn't rusted to the floor. Thanks for comment and support. We appreciate it.
@@JMRRebuilders you're welcome.
Success alive at 34 let's go 😁
Heck yeah brother let's go. Thanks for comment and support
I’m in love I want it what such beauty
Heck yeah she's sharp for sure brother. Thanks for comment and supprt.
I got a 79 f 100 300 6 love it with 4 speed drive it every day
That's so freaking cool brother. Thanks for comment and support.
I’ll be putting an Offenhauser on mine 👍🏻
That is awesome. That is supposed to be a sweet setup. Good luck and thanks for comment and support
The transmission fluid will actually help with compression also if most people don't know that
Yeah man def hard about that.
running on 2 stroke mixed fuel does the same thing. helps an old engine lubricate up and better compression.
Hola muchachos muy bueno el vídeo si pueden traduzcan en español castellano .lo saludo desde argentina .lindo sus videos .solo el idioma .lo lo entiendo 😂😂.saludos 👍💪🇦🇷👋
Heck yeah man that's super cool honestly I don't know how to do that. Thanks for comment and support brother
Great content
Heck yeah we love that. Thanks for comment and support. Check out our other content for more.
@@JMRRebuilders exactly what I'm doing. We will also love to see you guys do head gaskets and engine rebuild much love 💕
Love it that's the plan with the green one soon. Thanks for comment and support
My dad had a White Ranger Lariat 3/4 ton 4 wheel drive. I'd like to have it!!
Let's go brother that's super cool glad you have that memory. This one's not for sale. Thanks for comment and support brother. Check out our other content
Are you ready? NO. (Blast!!!!)
Heck yeah brother got me good. Thanks for comment and support.
LA CAMIONETA DE MIS SUEÑOS FORD 250 78 🇨🇷 SALUDOS CARROS MJ 🇨🇷
Let's go
“Let’s go” = 50+, “Landon” = 8.6 million
Im not sure your math is accurate. Thanks for comment and support.
Sea foam deep creep best thing to use for something like this eats rust and cleans
Good to know. Really appreciate the support and comment.
Las ford f100 son tanques de guerra inmortales, con un amigo hacemos auxilios mecánico en los campos y tuvimos que poner en marcha una f100 deluxe del 79 que estaba en un granero desde el año 86 y en mediodia ya estaba laburando la chata, hay que sacarse el sombrero con las ford
That is so true. These old Fords are machines for sure. Thanks for the comment and support.
@@JMRRebuilders
much respect friend, greetings from Argentina!!!
That is awesome. I love Argentina. Always joked about someday moving there. So cool
@@JMRRebuilders Here the landscapes are beautiful, the economy is very bad, we Argentinians want to live in the United States, there for 100 dollars you can buy a tool here they are worth more than 700 dollars and the pay for the jobs is bad, enjoy your country friend that is a privilege
Oh no doubt very blessed for sure. I just love the country landscapes.
Just now got a minute to watch! So look for the comments
Heck yeah brother. Let's go. Thanks for comment and support
Good shape for the shape it's in
Heck yeah brother it sure is. Thanks for the comment and supper