VW Bug Wiring Harness Install Part 1

Поделиться
HTML-код
  • Опубликовано: 15 май 2022
  • Here is Part-1 of a video installing a brand new harness from Wolsburg West. It will show tips, tricks and step by step instructions.
  • Авто/МотоАвто/Мото

Комментарии • 94

  • @FixinBugsNStuff
    @FixinBugsNStuff  2 года назад +7

    Hey Everyone, enjoy the video and please add comments or questions.

    • @justdiyit9683
      @justdiyit9683 Год назад +1

      Hi, what year is this specific bug you’re wiring?

    • @FixinBugsNStuff
      @FixinBugsNStuff  Год назад +1

      @@justdiyit9683 it’s for a 66 vw bug.

    • @justdiyit9683
      @justdiyit9683 Год назад +1

      @@FixinBugsNStuff Awesome, I have a 1963 beetle and recently purchased the WW complete wiring as well and most of it looks very similar to yours. Mine is still 6v and also have the conversion kit to 12v so hopefully you make a 6v to 12v video in the future as I think you were very thorough and detailed in our video. Thanks again and subbed to your channel

    • @FixinBugsNStuff
      @FixinBugsNStuff  Год назад +1

      @@justdiyit9683 the wiring I showed is for a 12v setup. The 66 did have a 6v system, but the wiring was too old to use. So I ordered the WW wiring for the 6v setup. The gauge of wire is what matters concerning amperage. The good part is, upgrading to 12v doesn’t change anything. Except, flasher relay, wiper motor, starter, ignition coil, generator, flywheel and all lightbulbs. If you have already done this than you are in good shape. I believe I have a video showing how to change the armature for the wiper.

    • @justdiyit9683
      @justdiyit9683 Год назад

      @@FixinBugsNStuff Awesome!

  • @NTNGMAN
    @NTNGMAN Год назад +3

    Wanted to say thank you, I draw a blank when it comes to electrical but you gave the motivation to remove my wires, by the harness and start the installation. Appreciate the video, thanks again. Great job.

  • @Landymobs
    @Landymobs 9 месяцев назад

    Dude.... life saver. Doing a full restore on a 69 for my wife. First full restore ever, and my experience is lacking in electrical. These videos you made are beyond helpful and I can't thank you enough. The bug came stripped for paint with no electrical components on it. Was pausing the video to get my list going for parts.
    When it's finally time to wire it up(chassis is currently off body and it'll be a while before it gets painted), I'll be referencing these videos.
    Thanks again, dude.

  • @tommueller2650
    @tommueller2650 2 года назад +4

    Excellent. You make it look so easy. Thanks for breaking it down step by step.

  • @hermesseda4977
    @hermesseda4977 2 месяца назад +1

    Very helpful video. Great job. Thank you

  • @jrlopez4585
    @jrlopez4585 Месяц назад

    ... Hi, just so happened that when I purchased my 1966 VW Bug the Wiring Harness (Wolfsburg West) came with the Bug ...
    so I'm leaving it aside so when the time comes to be installed and thanks for your Review and Installation process .

  • @brianw8963
    @brianw8963 11 месяцев назад

    I always take pictures when I dismantle stuff like this,now, but I did not 6 or so years ago when I totally dismantled this 69 I’m totally restoring. Finally got the paint done and started on the total new wiring harness and sorta forget where the harness was routed etc.. Thank You so much , this helped Me a lot! Mine is a convertible and a bit different, but Got Me on track. Thanks again.

  • @marianosabas
    @marianosabas Год назад +1

    Love the video, well explained on your step by step. Im going to be wiring my 66 soon.

  • @watchdog3605
    @watchdog3605 11 месяцев назад +1

    Best air cooled vw wiring help on RUclips

  • @VolksStokes
    @VolksStokes Год назад

    Oh man!!! You make it look so easy 😊🎉❤

  • @VWBEETLEOVAL1955
    @VWBEETLEOVAL1955 2 года назад +3

    great tutorial and all explained so everybody can replace it.
    good job

  • @vayabroder729
    @vayabroder729 Год назад +1

    Great tutorial! Thank you!

  • @CAMERAMAN173
    @CAMERAMAN173 5 месяцев назад +1

    thanks for the well done video

  • @timhause6956
    @timhause6956 5 месяцев назад

    Nice job buddy!

  • @angelsoterojr
    @angelsoterojr 2 года назад

    U make it look easy 🤙🤙🤙

  • @toniweindl6132
    @toniweindl6132 Год назад +1

    Vielen Dank für deine Arbeit. Das war sehr hilfreich
    Viele Grüße aus Bayern

  • @davordukanovic1245
    @davordukanovic1245 2 года назад +1

    Great video, tnx! 🍻

  • @davidwhocares3293
    @davidwhocares3293 Год назад +1

    Great video ! 😊 nicely done ! New Sub !

  • @richlijacanacua
    @richlijacanacua Год назад +1

    Thank you very much.

  • @terryharris2092
    @terryharris2092 2 года назад +1

    what a job, ;; nice video, think id get lost,

  • @Mbalter39
    @Mbalter39 4 месяца назад

    Wher I can find this manual?
    And the Harness?
    Perfect tutorial!

  • @VWJawbreaker
    @VWJawbreaker 2 года назад +2

    Outstanding job on the video! That kit sure seems to be a top not harness.

    • @davidwhocares3293
      @davidwhocares3293 Год назад +1

      Yeah he made that thing look like it just fell into place ! He did a great job !

  • @SentBack1978
    @SentBack1978 9 месяцев назад

    Jim would like to know which harness you bought for this project? You do a great job on teaching in this video!

  • @marklamse3261
    @marklamse3261 11 месяцев назад

    awesome

  • @adrianoregel3693
    @adrianoregel3693 11 месяцев назад

    Hello it’s 8/30/2023great video by the way I’m about to bring a Manx back to life VERY EXCITED 😊 quick question for you will this harness work for a 1976 Vw Manx?

    • @FixinBugsNStuff
      @FixinBugsNStuff  10 месяцев назад

      Look at Wolfsburg West and see what they have.

  • @escarabajohsp9616
    @escarabajohsp9616 Год назад

    Hello greetings, where can I get the complete kit of cables and parts with installation instructions? I'm from México 🇲🇽

  • @trevorallan1340
    @trevorallan1340 Год назад +1

    Nice job on the video. It's hard to believe that over 7400 views you only have 220 likes.
    I been dreading replacing the wiring in my 67 but this video makes it look easy. Thanks for the Key Moments list it makes it easy to follow. I'm converting my generator to an alternator, will this kit work with it also? Last question. Are all the boots you used readily available online?

    • @FixinBugsNStuff
      @FixinBugsNStuff  Год назад +1

      Yep not all agree with my methods, but I just want to help out as many as I can.

  • @omaramin8246
    @omaramin8246 Год назад +1

    Great video brother very informative cause of u I'm doing it myself who did u purchase kit from

  • @lehuadefiesta5953
    @lehuadefiesta5953 Год назад

    Great video!
    What gauge (wire) did you use to add your tachometer wires?

  • @omaramin8246
    @omaramin8246 Год назад +1

    Informative great job whom did u purchase from thank you

  • @warddodd
    @warddodd 2 года назад +1

    Where did you find those clamp on brake line brackets on your axle tubes? Never seen those before, slick.

    • @FixinBugsNStuff
      @FixinBugsNStuff  2 года назад

      They are stainless and I had them made. You may have to look them up on Facebook marketplace.

  • @VolksStokes
    @VolksStokes 3 месяца назад +1

    Horn: (-) or (+) = Not sensitive :)

  • @napgonz
    @napgonz 2 года назад +1

    Good video! Is that Manual available somewhere on the internet?

  • @hermesseda4977
    @hermesseda4977 2 месяца назад +1

    What kind od spray you put on wire make it easier go through.

    • @FixinBugsNStuff
      @FixinBugsNStuff  2 месяца назад +1

      A silicone spray. It does not agitate the wire insulation.

  • @argimiromalave3216
    @argimiromalave3216 Год назад +1

    I got that harness from wolfurwest. My oval 1956 year has semaphore. What ia your recommendation in my case?

    • @FixinBugsNStuff
      @FixinBugsNStuff  Год назад

      Did you order the harness for a 56? If so, it should come with the wiring for the semaphores. If not, you can run them.

    • @SDsailor7
      @SDsailor7 Год назад

      @@FixinBugsNStuff Working on the super beetles electrical is a pain in the A$$ due to the manual electrical symbols hard to understand.

  • @mperez5920
    @mperez5920 2 года назад +1

    I think I missed the year of your bug, and what years does your harness cover?

  • @ca.vulture.2695
    @ca.vulture.2695 Год назад +1

    I have a 71 squareback. Is the wiring setup the same???.

    • @FixinBugsNStuff
      @FixinBugsNStuff  Год назад

      No it is not. Is it fuel injected? Totally different wiring.

  • @kellyparks7116
    @kellyparks7116 3 месяца назад +1

    Which harness did you get. Got a 1967 bug

    • @FixinBugsNStuff
      @FixinBugsNStuff  3 месяца назад

      Get one from Wolfsburg West. They are really good with full instructions.

  • @fernandoolivares7229
    @fernandoolivares7229 2 года назад +1

    Can i use this video for a 1959 vw
    Beetle

    • @FixinBugsNStuff
      @FixinBugsNStuff  2 года назад +1

      You could use it as a reference but, not as an exact step by step.

  • @dlynes8463
    @dlynes8463 Год назад +1

    Any chance you have a shared saved copy of your wiring instructions? It’s much better than one I received with my full kit. Mine look like a kid drew them.

    • @FixinBugsNStuff
      @FixinBugsNStuff  Год назад +1

      Email me, I think I have it electronically.

    • @dlynes8463
      @dlynes8463 Год назад +1

      Thanks for your reply and consideration. I cannot find your email. What is it? Thank you.

    • @FixinBugsNStuff
      @FixinBugsNStuff  Год назад

      @@dlynes8463 email me here: dg4022618@gmail.com

    • @dlynes
      @dlynes Год назад +1

      @@FixinBugsNStuff May I have your email address please? Thank you.

    • @FixinBugsNStuff
      @FixinBugsNStuff  Год назад

      @@dlynes d.garcia721@yahoo.com

  • @hobbyautobodyfun9315
    @hobbyautobodyfun9315 2 года назад +1

    🤔 interesting

  • @johnwarfn
    @johnwarfn Год назад +1

    Is there any interference running the tach wire next to the main harness?

    • @FixinBugsNStuff
      @FixinBugsNStuff  Год назад +1

      Nope none at all.

    • @johnwarfn
      @johnwarfn Год назад

      @@FixinBugsNStuff thanks! Going to wire my Ghia soon and I want to add a tach

  • @javiercamarillo4498
    @javiercamarillo4498 Год назад +1

    Can I use this Video layout for a 68

    • @FixinBugsNStuff
      @FixinBugsNStuff  Год назад +2

      Yes. There may be a few extra wires for the flasher relay.

  • @Bethany6975
    @Bethany6975 2 месяца назад +1

    Question(sł what year beetle was this done on? I have a 1977 standard beetle sedan would this work on it?

    • @FixinBugsNStuff
      @FixinBugsNStuff  2 месяца назад

      1966.

    • @Bethany6975
      @Bethany6975 2 месяца назад +1

      @@FixinBugsNStuff now other question. Could I use this on my 77? The wires look awfully similar. If not is there anywhere online you'd recommend for this year model?

    • @FixinBugsNStuff
      @FixinBugsNStuff  2 месяца назад

      You could, but it would be better for to actually get the schematic for your year. You can find it here: www.thesamba.com/vw/archives/info/wiringt1.php

    • @Bethany6975
      @Bethany6975 2 месяца назад +1

      @@FixinBugsNStuff thank you you're a lifesaver! :) I'll try it this weekend

  • @adrianoregel3693
    @adrianoregel3693 11 месяцев назад +2

    What model# was that how do we order it

  • @leroybrown6118
    @leroybrown6118 Год назад

    Where did you buy the wiring harness

  • @dumpsterfire6351
    @dumpsterfire6351 10 месяцев назад

    Why would those wires not be included in the WIRE HARNESS

    • @FixinBugsNStuff
      @FixinBugsNStuff  10 месяцев назад +1

      Each manufacture is different so I assume WW is different.

    • @dumpsterfire6351
      @dumpsterfire6351 10 месяцев назад

      @@FixinBugsNStuff I suppose
      WW not prestige anymore?