This was an emotional rollercoaster for me but it all worked. You are a LIFE SAVER!!!! Im definitely gonna recommend this to everyone dealing with the same issue! Thank you so so much!
This is the only walkthrough that worked to get my trusty PS3 back to working order. Nobody on the other walkthrough/tutorials talk about the hard drive formating, very thorough and very easy to follow. Thanks alot for doing this video dude 🙂 ***USB DRIVE*** *Incase this helps any one, i changed my usb to a 4gb usb drive instead of using my 16gb one, i know everyone says that under 32 gb is fine but i struggled with a 16gb one for adding the firmware, try lower storage usb drive if you can't get the PS3 to read the drive - just what worked for me, good luck!
After the whole process, make sure to set your Auto Update to OFF. --> Go to SETTINGS --> Scroll Down To SYSTEM SETTINGS --> The very firs line will say "Automatic Update". Make sure it's set OFF. this will prevent any future updates that goes against your mods.
You enable toggle recovery mode if you enable toggle recovery mode when be ps3 got reboot but locks how to fix press quickly power button 1beep 2 beel shows xross media bar show hdmi cable press yes second press yes when be ps3 got restart and now ps3 got unlocked but not remove a data movies games purchased its prank and April fools
My PS3 Fat was bricked and I fixed it using 2 PS3s and I formatted the HDD using my PS3 Super Slim and reinstalled the firmware on the PS3 Super Slim and then I put the HDD back into my PS3 Fat. I did that same thing again on my PS3 Fat and then it was fixed!
when i connect my sdd to the SATA cable and go to try formatting its not initializing the disk its saying “fatal device hardware error”…should i just get a new hard drive?
So if I unbrick it do I lose all my games and save files? Also can I reinstall the firmware onto the ps3 or do I have to jailbreak it again? (I lost my ps3 to this error about a year ago but I think the firmware I had was called Rebug) Please respond to this, thanks. 👍
@user-sq4kj3uk9t I'm not sure man, I just done exactly what was said in the video and then I reinstalled the custom firmware after I'd fixed it. If you have the exact same error code as in the video then I'd say just do the same
I just started adding games swapping HDD to 1tb Cause was kinda lagging But guess what the Fregin flash dump sht man if I knew that sht I would of gone with freeing HEN 10 TIMES SAFER I was following another dude channel but he didn't Say it may fuck up even if is good flash dump damn even ps4 HEN WAS SAFER 😢 mine works plays games FROM BLURAY DRIVE I have no time to E3 FLASHER IT I will find another one add HEN If jailbreak works without the freaking flashing thing on lower firmware why was needed the flashing it patches system IT IS what it 🤷 people are a mess this why I don't trust nobody 💯 🤷
I did everything like this and it kind of worked. The same screens came up for me but once it started formatting, at around 50% I got the same error message and went back into the system update loop. Any advice?
I dont have a laptop or usbbto do this on.. Is there any other way possible of me fixing this? Could i buy a new harddrive and swap them? Any help is appreciated
If you bricked your PS3 while jailbreaking*PS3HEN* like I did stupidly - READ THIS (to save some time) Don't worry about downloading the official update/install file from the Playstation website. You can use the HFW file you were already using for the jailbreak. Copy the (HFW) PS3 folder to your formatted PS3 hard drive. HD back into your PS3. Insert the USB Drive too. Turn it on and follow the install instructions. It will install a fresh version of the OS (with the specific HFW shiz in that install). Install it once again (as most jailbreak instructions advise to) via the USB install method. Then you are back to just before where you "may" have messed up. (then at least you don't have to then format the USB with the jailbreak install and then install that 2 times...)
Mine happen like this but then when we sent to technician it’s look like it’s ok but we don’t know that it won’t read ps3 disc bcz of what I heard the technician change the system or some thing I dunno much about this stuff do you know what to do about this can this method can be used for my problem ?
This method only erases all the data (including corrupt) from SSD, it should not have effected the disc reader. It seems like the technician might have switched the blue ray disc reader or the console entirely.
Dude I had this error code when I trying to jailbreak it then I brought the thing for the hardrive did all ur steps then the pice of shit showed a different error code after I got 39% of the update thing 😡 anyone know how to it error code was 8002f1f9
My problem is I Have jailbroken ps3 slim with evilnat 4.90 installed and now i try to update and i stuck in update loop with code error 8002f14e any help ?? i format the Hdd many times again and again and nothing change ....please help
I can't get the write protection off of my hdd ps3 drive. I tried ease tool and partition on windows. No luck. I even tried cmd prompt to format my ps3 80gb hdd. I am getting the boot loop on installing system update each time I restart my ps3.
my ps3 is jailbroken and now it keeps cutting off once it gets to the menu screen, i tried useing the usb method you described and it keeps not recognizing the update. please help
Did your PS3 run into same issue before jailbreak ? If no, then your PS3 is rejecting the mod. Which means your PS3 is not compatible with available mods. Is your PS3 one of those slim ones ?
If same error appears, that means your SSD never got cleared/erased properly (Thats why your console displaces the same error code) Make sure to use proper SATA cable and connected firmly. Also make sure you select the correct ssd
My ps3 was modified by multi-man (hacked) and i connected to the internet and requested an update, but the update did not complete and the problem and code 8002f334 began appearing, does this method work to fix it ?
Yes it should. Because if you had access to run Multi-Man or Web-Man that means your console was jailbroken with software older than 4.87 thus for when your console went through the latest update (4.87) it interfered and bricked the console.
@@alighost22 you must format your SSD first and upload the latest software (follow the video) and once you do that, you will have a clean PS3 ready to be jailbroken again.
@@ryanalkana6579 if it’s still saying no applicable data found, that mean your PS3 console cannot detect the software update. Try to format the SSD again and using a deferent USB and formate it to FAT32 and make sure you name the following files as specified in video. Creat a new file, PS3 (inside that file)-> Creat a new file, UPDATE (inside that file the actual software update -> PS3UPDAT.PUP
Awesome stuff. My ps3 was bricked by sony in 2009 with the 4.41 software can I still fix using this method? I just dusted off console and was using multiman
Was literally just downloading 4.88 system update and on 70% of it initialising we had a blackout 🤦🏻♂️ Power only coming back on in a couple hours and seriously hoping my PS3 will turn back on!
@@ismaeelkhan9511 we got a thing in south africa called "loadshedding" where our countrys energy supplier has been so mismanaged by a corrupt government, that every day, all grids around the country are systematically turned off for a couple hours at a time in rotation... there is actually an app that gives us the loadshedding schedule if youll believe it!
To fix this problem, if you had a blackout during a PS3 update, you can fix it either by formatting your HDD with an adapter on your computer or you can try to format it with another PS3 and it will, tell you to reinstall the firmware like the other way in this reply but it will tell you to reinstall the firmware on your PS3 that is okay and then the bricked PS3, getting a new HDD or an SSD and if none of them work, then you can use an E3 Flasher if you dumped your NAND or NOR chip if you had a bad NAND or NOR chip. BTW, I think that the E3 Flasher will only work on the PS3 Fat (Phat) and the PS3 Slim if you have a PS3 Slim that is model CECH-25xxA or CECH-25xxB or lower because these are the only CFW compatible PS3s.
@@milanlukic1063 it sounds like the system did not find any updates from USB stick. Make sure you format the USB to FAT32, Before you transfer the System Update (PS3UPDAT.PUP) Also question, before you formatted your SSD, did you have the Error Code 8002F334 ?
@Funky production the main reason your PS3 cannot detect latest software is due to USB stick not being properly formatted to FAT32. Try these steps, 1. Try re-formatting the your USB Stick and only placing the PS3 software update file inside it (nothing else) 2. Make sure your files are named correctly (PS3 -> UPDATE -> PS3UPDAT.PUP) 3. Stick the USB stick to the LEFT port of the PS3 (for some people that worked) Follow this guid on formatting the USB stick to FAT 32 m.ruclips.net/video/JC85kCqkojI/видео.html
RUclips guy missed that part where you have to name the folder PS3 then create a folder inside that called UPDATE and put the update file in that folder.
You have to create a folder named PS3 then a folder inside that one named UPDATE then put the data in that folder. You tube guy had everything else accurate.
Thank so much, But in my case i needed to start in safe mode. For that you need to keep your finger on the power button of your turned off ps3, wait the third bip the remove your finger repeat a second time. Then just choose to do an update and are we go
No. Formatting SSD will erase everything. It will be like a new PS3. Follow the link on how to mod your PS3 with the latest software update, m.ruclips.net/video/ZHdCXfkZBoI/видео.html
![[4K] Watch SpaceX Catch A Starship Rocket From Space!!! #IFT5](http://i.ytimg.com/vi/pIKI7y3DTXk/mqdefault.jpg)
This was an emotional rollercoaster for me but it all worked. You are a LIFE SAVER!!!! Im definitely gonna recommend this to everyone dealing with the same issue! Thank you so so much!
This is the only walkthrough that worked to get my trusty PS3 back to working order. Nobody on the other walkthrough/tutorials talk about the hard drive formating, very thorough and very easy to follow. Thanks alot for doing this video dude 🙂
***USB DRIVE***
*Incase this helps any one, i changed my usb to a 4gb usb drive instead of using my 16gb one, i know everyone says that under 32 gb is fine but i struggled with a 16gb one for adding the firmware, try lower storage usb drive if you can't get the PS3 to read the drive - just what worked for me, good luck!
After the whole process, make sure to set your Auto Update to OFF.
--> Go to SETTINGS
--> Scroll Down To SYSTEM SETTINGS
--> The very firs line will say "Automatic Update". Make sure it's set OFF.
this will prevent any future updates that goes against your mods.
yepp i think everyone turned it of cuzz it required PlayStation plus right ?¿?
You enable toggle recovery mode if you enable toggle recovery mode when be ps3 got reboot but locks how to fix press quickly power button 1beep 2 beel shows xross media bar show hdmi cable press yes second press yes when be ps3 got restart and now ps3 got unlocked but not remove a data movies games purchased its prank and April fools
Thank you soo much! Followed every step and finally fixed my ps3!
I’m glad it helped 🙂
no but I have already to download the ps3 update pup
my mom he have a PC
This may sound dumb, but can you restore your data or accounts after reinstalling the firmware
Thank you. You are a legend. 👍😀❤️ Works and now have my ps3 up and running to show my son.
you are a legend! i jailbreaked the ps3 of my brother and then i reset it and it gave me the error code. Finally fixed it THX!!
BROOOOOO THANK YOUUU SOOO MUCHH U EXPLAINED EVERYTHING SO EASILY I TRIED TO JAILBREAK IT BUT ENDED UP WITH THIS LOL😅 Thankyou🎉
thanks man, you were amazing explaining, i got to play my games again!
My PS3 Fat was bricked and I fixed it using 2 PS3s and I formatted the HDD using my PS3 Super Slim and reinstalled the firmware on the PS3 Super Slim and then I put the HDD back into my PS3 Fat. I did that same thing again on my PS3 Fat and then it was fixed!
when i connect my sdd to the SATA cable and go to try formatting its not initializing the disk its saying “fatal device hardware error”…should i just get a new hard drive?
BRO YOU SAVED ME!!!!!
I had the same problem and I just was crying 😭
THANK SO MUCH!!!!!!!!! ❤
I was hyped to fix it then I saw that costed money. That’s when I knew I was truly finished.
Thank you so much! You're a PS3-life saver! 😄
Bro did u put the software inside the SSD? Also inside the USB??
So if I unbrick it do I lose all my games and save files? Also can I reinstall the firmware onto the ps3 or do I have to jailbreak it again? (I lost my ps3 to this error about a year ago but I think the firmware I had was called Rebug) Please respond to this, thanks. 👍
Did. U lose all ur games
@user-sq4kj3uk9t yes but at least it's not bricked anymore, I just redownloaded them. Took me ages though
@user-sq4kj3uk9t I'm not sure man, I just done exactly what was said in the video and then I reinstalled the custom firmware after I'd fixed it. If you have the exact same error code as in the video then I'd say just do the same
I did everything but when i plug in my ps3 i get no display on the tv, any advice? (I am using AV component cables, my hdmi port does not work)
This is a simple and clear tutorial, thank you!
Does it save game data?
@@Zach_the_great Not for me
@@DorafamilyUse thank you. I’m kinda worried and will make a back up anyway.
this video was perfect. thank you bro. ps love the way you say "update" lol
Rip my ps3 2009-2024 🕊️
Me to bro
Same too broke to afford that shit bro
I just started adding games swapping HDD to 1tb
Cause was kinda lagging
But guess what the Fregin flash dump sht man if I knew that sht I would of gone with freeing HEN 10 TIMES SAFER
I was following another dude channel but he didn't Say it may fuck up even if is good flash dump damn even ps4 HEN WAS SAFER 😢 mine works plays games FROM BLURAY DRIVE
I have no time to E3 FLASHER IT
I will find another one add HEN
If jailbreak works without the freaking flashing thing on lower firmware why was needed the flashing it patches system
IT IS what it 🤷 people are a mess this why I don't trust nobody 💯 🤷
Same to me...
same🤦🏻♂️
I did everything like this and it kind of worked. The same screens came up for me but once it started formatting, at around 50% I got the same error message and went back into the system update loop. Any advice?
Have the same problem . Did you find a, solution?
@@reticentsoul6087 could be a dead hdd try another known good one
I have the same error
My ssd/hdd works in my other ps3 but it isnt jail Breakable
You saved me man!!!!! THANKS!!
Do I need this converter? Should I plug it directly into my old laptop and do the work from there?
THE BEST TUTORIAL IN THE RUclips. CONGRATULATIONS!
Did you make it, friend? Is your PS3 Slim or Super Slim?
What about my ps3 superslim 8002F1F9 error code? Its stuck in a update loop and I can't go back.
Picture of my sony only shows on safe mode and not when i turn it on and it says that hard disk was not found but i pluged it in the console
I dont have a laptop or usbbto do this on.. Is there any other way possible of me fixing this? Could i buy a new harddrive and swap them? Any help is appreciated
If you bricked your PS3 while jailbreaking*PS3HEN* like I did stupidly - READ THIS (to save some time)
Don't worry about downloading the official update/install file from the Playstation website.
You can use the HFW file you were already using for the jailbreak.
Copy the (HFW) PS3 folder to your formatted PS3 hard drive.
HD back into your PS3. Insert the USB Drive too. Turn it on and follow the install instructions.
It will install a fresh version of the OS (with the specific HFW shiz in that install).
Install it once again (as most jailbreak instructions advise to) via the USB install method.
Then you are back to just before where you "may" have messed up. (then at least you don't have to then format the USB with the jailbreak install and then install that 2 times...)
Hey do you have a recommended video to help me with this?
@@3lemoat No i don't sorry, just wrote this for anyone who had messed up along the way like I did.
Wait so any save data won't be lost or will it still be lost or can I back it up into my ps then do the thing and re insert all my save data and stuff
Mine happen like this but then when we sent to technician it’s look like it’s ok but we don’t know that it won’t read ps3 disc bcz of what I heard the technician change the system or some thing I dunno much about this stuff do you know what to do about this can this method can be used for my problem ?
This method only erases all the data (including corrupt) from SSD, it should not have effected the disc reader. It seems like the technician might have switched the blue ray disc reader or the console entirely.
my PS3 hdd need format to fat32 or not? or just NTFS(default)
Now my ps3 isn’t turning on the ps3 isn’t showing it’s turning red automatically can you help me please
i did everything like u said but im stuck with no applicable data found?? any advise ??please
Dude I had this error code when I trying to jailbreak it then I brought the thing for the hardrive did all ur steps then the pice of shit showed a different error code after I got 39% of the update thing 😡 anyone know how to it error code was 8002f1f9
I have done the same thing and when i get to the last part where it has to update it shows me the sam error like in the start
same
How would you put it in the fat ps3? Also can I download the latest cfw? For do I just restore it?
My problem is I Have jailbroken ps3 slim with evilnat 4.90 installed and now i try to update and i stuck in update loop with code error 8002f14e any help ?? i format the Hdd many times again and again and nothing change ....please help
Hi, i was having same issue with a CECH-20001, most probably is the Bluray drive, you would need to replsce it
Can I use a external harddrive to add update file along as I format it or wht I do
I can't get the write protection off of my hdd ps3 drive. I tried ease tool and partition on windows. No luck. I even tried cmd prompt to format my ps3 80gb hdd. I am getting the boot loop on installing system update each time I restart my ps3.
Big Bro!!!! You saved my Life !!!!
Do u lose ur games and data?
@@user-sq4kj3uk9t no no, everything Is ok!!!!
@@davideporcelli3839u don’t lose any pkg games
@@user-sq4kj3uk9tyes
Thanks for the video, I can finally play guitar hero!
I did all the steps but the formate on the ps3 stopped at 99 , any solution?!??????
Can we do it from the safe mode or only USB
Is there a way to do this without losing my files?
my ps3 is jailbroken and now it keeps cutting off once it gets to the menu screen, i tried useing the usb method you described and it keeps not recognizing the update. please help
Did your PS3 run into same issue before jailbreak ? If no, then your PS3 is rejecting the mod. Which means your PS3 is not compatible with available mods. Is your PS3 one of those slim ones ?
@@abouteverything4735 no it was fine before the mod
Games will be deleted or not plz replay
After your format it will it delete all of your data
Mine doesn't have any error or anything it doesn't shows up do u have discord? For help or anything
Very informational, thank you.
Bro thanks for this I saved my PS3
AINT WORK WONT READ THE UPDATE FILE AND I GOT IT OFF SONY WEBSITE MY USB IS FORMATTED AND I DID EVERYTHING RIGHT FOR THE HD......
I did follow every step you did but nothing is changed always that same error is appearing
If same error appears, that means your SSD never got cleared/erased properly (Thats why your console displaces the same error code) Make sure to use proper SATA cable and connected firmly. Also make sure you select the correct ssd
Yeah 🎉it worked out great 👍🏻. The you so much you are amazing really. The explanation step by step and everything you are amazing yo 🤗🥰🥳🥳
My ps3 was modified by multi-man (hacked) and i connected to the internet and requested an update, but the update did not complete and the problem and code 8002f334 began appearing, does this method work to fix it ?
Yes it should. Because if you had access to run Multi-Man or Web-Man that means your console was jailbroken with software older than 4.87 thus for when your console went through the latest update (4.87) it interfered and bricked the console.
@@abouteverything4735 If my device is hacked, what version do I need, and what software do I need
@@alighost22 you must format your SSD first and upload the latest software (follow the video) and once you do that, you will have a clean PS3 ready to be jailbroken again.
@@abouteverything4735 how i do this jailbroken 😅 are you have video to this proplem 😁🤔
@@alighost22 m.ruclips.net/video/ZHdCXfkZBoI/видео.html&pp=QACIAgA%3D
Follow this link
Thanks man you helped me a lot whish you the best ❤
What will happen to my progress in my video games
Ive tried all this but mine is saying no applicable data was found but the usb stick is in with the update file
Is your USB higher than 32GB in capacity ? And you manage to format the stick to FAT32 ?
@@abouteverything4735 USB is less that 32gig and yes formatted to FAT32,
@@ryanalkana6579 if it’s still saying no applicable data found, that mean your PS3 console cannot detect the software update. Try to format the SSD again and using a deferent USB and formate it to FAT32 and make sure you name the following files as specified in video. Creat a new file, PS3 (inside that file)-> Creat a new file, UPDATE (inside that file the actual software update -> PS3UPDAT.PUP
@@abouteverything4735 hi i did all of that but it still says no applicable data was found can you please tell me a solution thanks
@@cooldk2042 unplug your controller when you get to that screen, it will work.
if its bricked can you still get the usb software update????
Yes but you have to erase the corrupted data first. One way of doing it, is by formatting ssd (follow video)
Man I love you dude thank you so much 🙏
thanks a lot my guy, saved my ps3
But the hard drive is supposed to be in fat32 format
Hey i was wondering how to fix the problem i have that it says there isnt any useable update data
m.ruclips.net/video/FzBbYUjUt8Q/видео.html
Hay I have done all the steps and it still has a error 8002F147.
This process should have erased everything from the hard drive. Check the second video I have posted regarding system update file, maybe it’ll help
What will happen to saved data utilities
currently the playstation website for downloading the update is broken I had to drag the link button into a new tab in order to get it downloaded
Nice. This save my PS3
Awesome stuff. My ps3 was bricked by sony in 2009 with the 4.41 software can I still fix using this method? I just dusted off console and was using multiman
try it bro and give me an update about its working or not
can i get my games and data back after all this?
Definitely worked for me. Thanks! 👍
Can I do it with MacBook ?
Brother is there any other way
what this is the disk dur or carte network
i got fatal error any help?
Just a question will all my gigabytes still be there?
Yes. Formatting has no effect on storage. It will just clean the data inside the ssd
@@abouteverything4735 oh ok thank you so much
@@enisi07 Enjoy!
Was literally just downloading 4.88 system update and on 70% of it initialising we had a blackout 🤦🏻♂️
Power only coming back on in a couple hours and seriously hoping my PS3 will turn back on!
yeah bro this happens too much in India i donno why they play with electricity like they donno what we r struggling to
@@ismaeelkhan9511 we got a thing in south africa called "loadshedding" where our countrys energy supplier has been so mismanaged by a corrupt government, that every day, all grids around the country are systematically turned off for a couple hours at a time in rotation... there is actually an app that gives us the loadshedding schedule if youll believe it!
To fix this problem, if you had a blackout during a PS3 update, you can fix it either by formatting your HDD with an adapter on your computer or you can try to format it with another PS3 and it will, tell you to reinstall the firmware like the other way in this reply but it will tell you to reinstall the firmware on your PS3 that is okay and then the bricked PS3, getting a new HDD or an SSD and if none of them work, then you can use an E3 Flasher if you dumped your NAND or NOR chip if you had a bad NAND or NOR chip. BTW, I think that the E3 Flasher will only work on the PS3 Fat (Phat) and the PS3 Slim if you have a PS3 Slim that is model CECH-25xxA or CECH-25xxB or lower because these are the only CFW compatible PS3s.
does this work on fat ps3s?
Yes. It’s just with fat PS3 the SSD card is on the left side wall of the console.
❤ my friend thank you .have to try this
thank you very much man 🙏
Doesnt work.I have fat one.Did it all like in tutorial and nothing.Just black scree...
screen.
system wont start after format in the tv it says No signal and it automatically shuts down after 1 minute.
@@milanlukic1063 it sounds like the system did not find any updates from USB stick. Make sure you format the USB to FAT32, Before you transfer the System Update (PS3UPDAT.PUP)
Also question, before you formatted your SSD, did you have the Error Code 8002F334 ?
@Funky production the main reason your PS3 cannot detect latest software is due to USB stick not being properly formatted to FAT32.
Try these steps,
1. Try re-formatting the your USB Stick and only placing the PS3 software update file inside it (nothing else)
2. Make sure your files are named correctly (PS3 -> UPDATE -> PS3UPDAT.PUP)
3. Stick the USB stick to the LEFT port of the PS3 (for some people that worked)
Follow this guid on formatting the USB stick to FAT 32
m.ruclips.net/video/JC85kCqkojI/видео.html
RUclips guy missed that part where you have to name the folder PS3 then create a folder inside that called UPDATE and put the update file in that folder.
this is not an SSD. just a heads up.
my play station 3 no application update data was found
this helped a bunch thanks
after all these steps my ps3 shows after installing the 4.88 error code at 39% (8002F147)
What happens if format my ps3
Doesn't work for me. Omg
Its not an ssd that you got in your ps3 its just an hdd hate it when ppl use wrong lines
Yeah me aswell but it still works I think
@@3nndoWasTaken i know it should work but hes using an hdd and always is saying ssd
@@Tuningw_gaming ik
My harddrive only lights red and Not Blue
Please help
King 👑
It says that I dont have acsses rights
Thank you from iraq love you🏅
Didn't try yet, waiting for my SSD reader to arrive hope it works
it in fact worked
you are the best thank you so much
Why the screen it’s took long time
Leo I update via storage media i
My super slim having same issue also my ps not working Bluetooth
By formatting your SSD, I’m sure you will be able to save your PS3
No application update data was found
The system could not recognize the USB stick. Mostly due to it’s not being formatted to FAT 32 properly. Try reformatting or using another USB stick
You have to create a folder named PS3 then a folder inside that one named UPDATE then put the data in that folder. You tube guy had everything else accurate.
My dose not turn on
That’s called HDD NOT SSD
Lmao 😂😂😂😂😂
Thank so much,
But in my case i needed to start in safe mode.
For that you need to keep your finger on the power button of your turned off ps3, wait the third bip the remove your finger repeat a second time.
Then just choose to do an update and are we go
Is any other wany than this
Will my ps3 be still jailbroken
No. Formatting SSD will erase everything. It will be like a new PS3. Follow the link on how to mod your PS3 with the latest software update,
m.ruclips.net/video/ZHdCXfkZBoI/видео.html
@@abouteverything4735 wait so it will erase all games?
@@bikestrike21v31 Yes. You must re-mod your PS3 / re-download all your games and applications.
@@abouteverything4735 oh ok thanks
And what about my progress in those games will it be erased too@@abouteverything4735
This isnt what a bricked ps3 looks like😭😭😭😭