Watch the second of the 2 parts and you will see why he commented about using a cutting disk for a grinder. In such a hurry to prove someone wrong you made yourself look smooth brained.
Different material requires other drill point angles to drill effectively , just like Different drill bit sizes require slower or faster 😂speeds. And a center punch keeps your bit where you want it. A old timer will sharpen a dozen bits while you build these jigs.
They don't think they're perfect. They're saying that people who trained for years under highly skilled craftsmen learned how to do this quickly without guides. Back when I learned, guides were available, but I was told by my teachers (craftsmen in their 70s) that guides were a crutch and that I'd never be able to run on crutches. The crutches are fine for weekend warriors who don't have time to learn the proper way to do the job. If you want to learn how to do the job quickly without complicated jigs, find someone like the person you've been castigating and ask. They are usually are gruff old men who'd be delighted by the question. Learning to do it right would take less time than making this jig.
What is boring, the conversation of, wait for it …….. “ my daddy is bigger then your daddy “ “ blah blah “ 😮😢😂 I am sure when “he” discovered the light bulb, some “ole timer, or daddy lover” said, “ why are you bothering with that for? We can use whale 🐳 oil, or candles, to light up our life!” These kind of replies are entertainment and amusing, at best. Finally, I am a master painter, with tips and tricks that would blow your mind on any finish, or faux painting, on any surface. Yet, I would “never” disdain or dispare anyone that said, this works for me. 🤔😉
@SherylinRM Nice try on the high road, there. You claim to be "complimentary and encouraging" while disparaging an earlier commenter. When I clearly state that jigs are fine if you don't have the time, but learning how to do the job without them is faster and easier in the long run. You ignore that in my comment and continue your trollish gaslighting behavior. You can get around on crutches, but you'll never be fast.
That's a very practical idea, man, sometimes we hold drill bits by hand to sharpen them without tools, which is very risky and we have to go to the hospital, thank you for this idea.
It is probably to hide the fact that the box section was centre punched the second time and the reason it was able to cut. No mention that if the point is not perfectly central the drill will not cut the correct size. It’s not that difficult to grind a drill by hand on a bench grinder and certainly not worth all that effort!
Oh ok 😂 well it looked like a super glue bottle so o was thinking wtf. Maybe u know something I don’t idk. Never knew super glue and cotton would make such a sturdy material either
@@MegaAde182 yes it is easy IF u know how to or done it before. I sharpen bits everyday for my guys. (Installing storm shutters) and some of the bits those guys tried to sharpen is like a dagger 😂 no cutting edge just a sharp point. So this would help guys like those that can’t figure it out
Holy shit, I just realized my eye can save me an hour and a half of tinkering every time I shapen a bit. What should I do with all my extra time not building stupid contraptions I don't need if I've actually listened to mentors?
Never use a grinder in a vice. Never bolt on a attachment other than a handle. Never use the wrong discs and last off never watch this dangerous idiots vedeos again.
Sure, this will help you to get your dull drill bits sharper, but you won't achieve true sharpness this way. You need to be able to roll the drill bit while maintaining the angle. Therefore it is beneficial to just grab a box full of dull or broken drill bits and start practicing sharpening by hand.
Witam chodzi mi o to jaki jest sens ostrzenia wiertła ostrego jak brzytwa? Chyba że opis byłby taki Jak naostrzyć wiertło by było tak ostre jak brzytwa. Pozdrawiam.😄
جناب لطفاً با آموزش غلط باعث آسیب به دیگران نشید آخه چه کسی به شما گفته از بغل سنگ استفاده کنید این کار باعث پودر شدن ناگهانی سنگ و آسیب به کار بر میشه اصلا هم اصولی نبود این طور مته تیز کردن برای جلوگیری از سر خوردن مته باید یک نشان کوچک با یه میله گرد مثل میخ HSS استفاده و نشان را ایجاد سپس سوراخکاری کرد بدون فرار مته
Where is this bloke from? We were tought to do it by eye and get it right. If I took the length off time this hack takes I’d be sacked as a first year apprentice. Look at the drill vibration
The only fault I can see with the wooden template is you don't show at what angle the wooden templat stands alongside the vice . There must be a set angle to perform the same cut on different bits . Other than that it's fine . Gerald
As a very young apprentice i learn't drill sharpening by practice practice practice, drilling chassis rails needed a very sharp drill. At trade school we were shown the basics, angles even simitry and rake relief. I failed infact i got a big fat 0.0 because teacher accused me of presenting a brand new drill from the box. I admit i was taken back how was i to prove i actually ground the drill. Then it dawned on me that the drill was shorter than the new drills by an inch so asking teach to reevaluate my work showing his error. 95 % pass mark was the best i could get from him Lol P.S. having a sharp drill is only half of the equation, the incorrect speed is the number one killer of a sharp drill. Just one more thing, they are drills not bits .Bits go into braces thats a old school tool used by hand for drilling.
![6 Practical Drill bit Sharpening Hacks !!! [Subtitle]](/img/1.gif)
You did very well dear friend.
Thank you very much
Hey Bud, a cutting disc is not a grinding disc. Just saying. Might blow up in your face (seen it happen)
Look how thick it is, clearly a grinding disk not a cutting wheel
Watch the second of the 2 parts and you will see why he commented about using a cutting disk for a grinder. In such a hurry to prove someone wrong you made yourself look smooth brained.
WE OLD SCHOOL FITTER /MACHINISTS DON'T NEED THESE DEVICES. WE WERE TAUGHT BY TRUE CRAFTSMEN TO DO IT BY EYE AND HANDSKILL. 🔨🔧👌👍
My technique is not good so I created it to make the job easier
Different material requires other drill point angles to drill effectively , just like Different drill bit sizes require slower or faster 😂speeds. And a center punch keeps your bit where you want it. A old timer will sharpen a dozen bits while you build these jigs.
They don't think they're perfect. They're saying that people who trained for years under highly skilled craftsmen learned how to do this quickly without guides. Back when I learned, guides were available, but I was told by my teachers (craftsmen in their 70s) that guides were a crutch and that I'd never be able to run on crutches. The crutches are fine for weekend warriors who don't have time to learn the proper way to do the job. If you want to learn how to do the job quickly without complicated jigs, find someone like the person you've been castigating and ask. They are usually are gruff old men who'd be delighted by the question. Learning to do it right would take less time than making this jig.
What is boring, the conversation of, wait for it …….. “ my daddy is bigger then your daddy “ “ blah blah “ 😮😢😂
I am sure when “he” discovered the light bulb, some “ole timer, or daddy lover” said, “ why are you bothering with that for? We can use whale 🐳 oil, or candles, to light up our life!” These kind of replies are entertainment and amusing, at best.
Finally, I am a master painter, with tips and tricks that would blow your mind on any finish, or faux painting, on any surface. Yet, I would “never” disdain or dispare anyone that said, this works for me. 🤔😉
@SherylinRM Nice try on the high road, there. You claim to be "complimentary and encouraging" while disparaging an earlier commenter. When I clearly state that jigs are fine if you don't have the time, but learning how to do the job without them is faster and easier in the long run. You ignore that in my comment and continue your trollish gaslighting behavior. You can get around on crutches, but you'll never be fast.
t's really good and useful, I really admire the way you do it very clearly and creatively
Thanks a lot 😊
Very classy smart and creative idea, I really admire you
Thank you! Cheers!
In the meantime, I used an 8 inch bench grinder and got back to work.
Each video encourages me to take actionable steps towards improving my life. Thank you for sharing!😉
Wonderful!
Thank you obvious bot
Your videos are great
Thank you for watching
I've been a tool maker since 1966 sharpening drills by hand.
Ponownie pytam jeśli wiertło jest ostre jak brzytwa to po co je ostrzyć?🤥
You must be very skillful
I am from east java from indonesia good your idea .. very creative...
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
Parabéns, ótimo vídeo bem criativo e de grande utilidade 👏🙏🏻
Hello! I am glad you like this ideas. Wishing you all good things!
That's a very practical idea, man, sometimes we hold drill bits by hand to sharpen them without tools, which is very risky and we have to go to the hospital, thank you for this idea.
Thank you for watching
Why did u put super glue on before u drilled the hole? What does that do?
No, That drop of clear liquid was oil. To lube the drill bit.
It is probably to hide the fact that the box section was centre punched the second time and the reason it was able to cut.
No mention that if the point is not perfectly central the drill will not cut the correct size. It’s not that difficult to grind a drill by hand on a bench grinder and certainly not worth all that effort!
it's oil
Oh ok 😂 well it looked like a super glue bottle so o was thinking wtf. Maybe u know something I don’t idk. Never knew super glue and cotton would make such a sturdy material either
@@MegaAde182 yes it is easy IF u know how to or done it before. I sharpen bits everyday for my guys. (Installing storm shutters) and some of the bits those guys tried to sharpen is like a dagger 😂 no cutting edge just a sharp point. So this would help guys like those that can’t figure it out
We thank you everyday buddy, never forgetting your amazing hacks👌👌👌🔥🔥
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
I am from São Paulo, Brasil. Thank you.
You’re welcome! I’m glad you found the video useful.
It's a good idea, it's a useful video 👍
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
🎉🎉
Thank you for watching
Holy shit, I just realized my eye can save me an hour and a half of tinkering every time I shapen a bit. What should I do with all my extra time not building stupid contraptions I don't need if I've actually listened to mentors?
Thank you for sharing your feedback and expressing your perspective
Good idea ❤
You are very skillful. I really like your video ❤
Thank you! Cheers!
De venezuela gracias
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
Always helps if you centre punch first….no need to put HSS in water…
Thank you! Cheers!
Yes I tried those methods.
Its amazing😍
Great 👍
Indonesia..
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Good
Thanks
O trabalho que para fazer o gabarito é melhor comprar brocas novas
sau khi chế tạo dụng cụ mài dao xong, các lần mài tiếp theo bạn mất chưa tới 1 phút để mài nó
Rio de Janeiro, Brasil
Muito criativo, mas eu compraria uma broca nova😂
Thank you for watching
Never use a grinder in a vice. Never bolt on a attachment other than a handle.
Never use the wrong discs and last off never watch this dangerous idiots vedeos again.
I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention
Sir i am from Phililippines , thank you very much 😅
So nice of you
Excellent tips thanks from Canada! 👍
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
Hello 👋
Hello 👋
@@creationholic101 👌
tôi chỉ lướt qua xem vui thôi vì tôi thợ hàn cơ khí tuổi lớn rồi rồi
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
ALMENARA/ MG,
Thank you for watching
精細！
Hello! Thank you so much for your comment! have a nice day!
Looks like I’ll only be thanking you for an exploded cutting disk in my face or a few missing fingers 😅😅, use a bench grinder
I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention
عالی 🎉❤
Thank you! Cheers!
Sete Lagoas Minas Gerais, Brasil.
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Sure, this will help you to get your dull drill bits sharper, but you won't achieve true sharpness this way. You need to be able to roll the drill bit while maintaining the angle.
Therefore it is beneficial to just grab a box full of dull or broken drill bits and start practicing sharpening by hand.
No need to roll the drill using the four facet grind….just look a modern drills..
@@johnhall8455 Modern drills suck.
Thank you! Cheers!
Türkiye 🇹🇷
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
😢tui không rành tiêng nước ngoài lúc nào tui binh lẻ phải
❗Vui lòng bật phụ đề bằng ngôn ngữ của bạn 🙋🏼♀ Cảm ơn bạn đã xem 😋🤗😘
Bench grinders have a grove in them specifically for this
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Trained to do it by eye, the angle of the two hex nuts is right.
Add just go to work and get a new drill bit from the vending machine 😂
It's cheaper to buy new one rather then going through all this!
You only need to craft it once, the next grinding takes less than 1 minute
The best way to sharpen a drill bit is with a Dremel and a diamond bit. That goes for chainsaws too.. I can sharpen a drill bit in 30 seconds .
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
من البصره
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Witam chodzi mi o to jaki jest sens ostrzenia wiertła ostrego jak brzytwa? Chyba że opis byłby taki Jak naostrzyć wiertło by było tak ostre jak brzytwa. Pozdrawiam.😄
Nemáš tam podbrus.
Flexsa je dobrá tak na stavbu.
Kto vie brúsiť, vie aj na flexe bez pripravku.
Dve matice na uhol ?
Tak pre nováčikoch.
Thank you for watching
But I want my razor as sharp as a drill bit.
Thank you for watching
The best go to hardware buy new one...
Thank you for sharing your feedback and expressing your perspective
U r n amazing Ha k
Thank you so much 😀
جناب لطفاً با آموزش غلط باعث آسیب به دیگران نشید آخه چه کسی به شما گفته از بغل سنگ استفاده کنید این کار باعث پودر شدن ناگهانی سنگ و آسیب به کار بر میشه اصلا هم اصولی نبود این طور مته تیز کردن برای جلوگیری از سر خوردن مته باید یک نشان کوچک با یه میله گرد مثل میخ HSS استفاده و نشان را ایجاد سپس سوراخکاری کرد بدون فرار مته
Thank you for sharing your feedback
Where is this bloke from? We were tought to do it by eye and get it right. If I took the length off time this hack takes I’d be sacked as a first year apprentice. Look at the drill vibration
It will help your grinding process go faster
Not safe… that disc is not made for that
Thank you for sharing your feedback and expressing your perspective
The only fault I can see with the wooden template is you don't show at what angle the wooden templat stands alongside the vice . There must be a set angle to perform the same cut on different bits . Other than that it's fine . Gerald
❗Please enable subtitles in your language 🙋🏼♀ Thanks for watching 😋🤗😘
Drain Oregon
Thank you for watching
Po co ostrzyć wiertło ostre jak brzytwa?! 🤣🤣🤣
Będziesz Mi dziękować przez całe życie! Jak naostrzyć wiertło tak ostre jak brzytwa
Everyone is dumber for having watched this.
I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention
How about opening schools to teach others your skills.
I just want to share what I find interesting and useful with everyone
De cuba provincia Guantánamo municipio baracoa
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
دوستان مته خراب شد دور بندازید
The goal of the video was to showcase a unique approach to recycling, but I understand that it may not resonate with everyone
@@creationholic101 🥴😉😉😉
Mài như vậy không đúng.
bạn có thể chia sẻ cách bạn làm được không ?
Iran
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
IRAN
Welcome to Creation Holic channel! Hope you have a good time while watching the video
So to sharpen a drill bit you need two sharp drill bits and a host of other stuff and the time to do it? Nah just buy a new one.
The goal of the video was to showcase a unique approach to recycling, but I understand that it may not resonate with everyone
Monsanto is crying
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Shiraz
Thank you for watching
As a very young apprentice i learn't drill sharpening by practice practice practice, drilling chassis rails needed a very sharp drill.
At trade school we were shown the basics, angles even simitry and rake relief. I failed infact i got a big fat 0.0 because teacher accused me of presenting a brand new drill from the box.
I admit i was taken back how was i to prove i actually ground the drill.
Then it dawned on me that the drill was shorter than the new drills by an inch so asking teach to reevaluate my work showing his error.
95 % pass mark was the best i could get from him Lol
P.S. having a sharp drill is only half of the equation, the incorrect speed is the number one killer of a sharp drill.
Just one more thing, they are drills not bits .Bits go into braces thats a old school tool used by hand for drilling.
Thank you for sharing your feedback . Have a good day!
😆
Thank you for watching
too much work involved,,
You only need to craft it once, the next grinding takes less than 1 minute
Κάρπαθος Δωδεκάνησα
Thank you for watching
Gone to home depot to buy a drill bit,let me know how it ends
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Very stupid idea
Hello! thanks for your comment. Wish you all the best!
Dumbest video this week, and that includes videos of Biden speaking.
I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention