Thanks man, you saved my watch. Two shops refused to replace battery as they had no clue how to open it =) I wish good luck to your channel and like of course
Thank you I knew I could do it myself I just had to have a little help getting started. I have quite a few of these watches and I've had good luck with every one of them.
Thanks mate you just saved me a lot of hassles n money on paying the unqualified and expensive local french watch repairers here where i live that would be a €20-30 fix!!! Ive stripped out the batts tonite will buy new in morning thanks for the good instructions
Got one of these because it looks cool. Replacing the batteries brought me here. Thanks. Question, when I try to reset the digital time, none of the buttons do anything. Please help?
Does all digital/analogue watches have two batteries? I have a Chinese digital/analogue watch where when you replace the 2016 battery the digital display comes up and shows the time, but the analogue past remains dead. The watch has never been opened, or immersed in water until both displays have gone dead, and I replaced the 2016 battery. The interior looks like your watch, is there another battery driving the analog part of the watch? The watch is "unbranded", but I paid $30 US for it. Can you help me?
Nice demonstration on replacing the two batteries for this watch. Now my question is once you swap out the cells and reassemble the various plates , cover and band after tightening all the screws down. Would you still be able to use this watch under water at the depth ATM level that it is rated at? Inquiring minds want know.
That is an excellent question Maxoman427. This is the China made unbranded watch. We have never tested the water resistance level of it. However, normally if the process of replacement of the batteries are done right that should not affect the water resistance of the watch. However, in certain situations if there is a real concern the extra silicone may be applied to the gasket before putting the back of the watch together. Sincerely, TBTwatches Management
For the analog past: battery is 377/626 (interchangeable numbers) For the digital part is CR2025. Thank you for your question. Sincererely, TBTwatches Management
He actually fitted a 364/SR621SW silver oxide and CR2025 lithium , a 377/SR626SW is the same diameter as the 364 but is thicker so it would stand to high if fitted.
The most important part - how to loosen the stud from the bracelet without damaging it - is not seen properly because the focus is out of the picture. Why you do not check something like this when uploading a video? And why you do repair the watch with the original label on it? This paper label is always in the field of view. And what are the numbers of the batteries? Which cells you have replaced???? By the way, you could have also named the battery types at the same time: The large main battery for the digital display is a Maxwell CR 2016, 3V and for the analogue clock is a SR 626 SW, 1.55V battery.
Sir please tell my watch is not showing time but hour and .minute hand ( ( spicule)is working so it's a case of battery low or another problem happens plz telll
The problem @ digital/analog watches is that after replacement of the digital platine unit, the LED light for the digital view is not working anymore, I do not find any failure. May anyone knows the problem and how to fix the issue?
@@ignacastro there are 2 small carbon rubbers around the platine, it seems that I lost it during exchanging the batteries, the problem is that I cannot find replacement rubbers, it seems that they must be conductive but I am not sure, the rubbers are necessary that the led background light works
you need to ac recharge the battery unfortunately there is no markings to indicate the ac recharge. im facing the same problem. the led failed to light up.
i also replaced a new battery for the analog part and it worked the only problem is the backlight now is not working.the same problem happened on the other watch
@@nickpaji8528 Remove the back plate again and check that the pusher is not caught on the edge of the spring contact, if the module moved while fitting the battery it can sometimes get caught up. when you gently push the light button you should see it push against the flat of the contact on the module.
I had the problem several times, the problem is that the rubber contacts were lost after replacement of the battery, look if there are any small rubbers with 3x5 mm you may lost
Hello, sorry for taking little long to respond. This is a Chinese off brand watch Exponi. This is the link for it: www.tbtwatches.com/exponi-sport-men-s-analog-digital-rubber-strap-watch-black-and-yellow-2.html Sincerely, TBTwatches Management
It may absolutely seem like that. However, we are here to offer our support, skills and experience if needed. :) Sincerely, TBTwatches Management www.tbtwatches.com
you are a police person with no worries about that any questions related or anything about it to be explained I anger you are not reachable and you are interested to see me again however I have been updated with my dear sup
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
Thanks man, you saved my watch. Two shops refused to replace battery as they had no clue how to open it =) I wish good luck to your channel and like of course
Thank you I knew I could do it myself I just had to have a little help getting started. I have quite a few of these watches and I've had good luck with every one of them.
Sehr gut. Vielen Dank. Habe au h eine Exponi, und muss sagen Top Qualität. Sogar extrem Wasserdicht.
Thanks mate you just saved me a lot of hassles n money on paying the unqualified and expensive local french watch repairers here where i live that would be a €20-30 fix!!! Ive stripped out the batts tonite will buy new in morning thanks for the good instructions
I never heard you mention the battery sizes? Both the larger and the smaller batteries. That would have been very helpful.
Thanks for the video, it helps me to locate the analog battery for replacement.
Got one of these because it looks cool. Replacing the batteries brought me here. Thanks.
Question, when I try to reset the digital time, none of the buttons do anything. Please help?
thank you for posting...helped a lot!!
Does all digital/analogue watches have two batteries? I have a Chinese digital/analogue watch where when you replace the 2016 battery the digital display comes up and shows the time, but the analogue past remains dead. The watch has never been opened, or immersed in water until both displays have gone dead, and I replaced the 2016 battery. The interior looks like your watch, is there another battery driving the analog part of the watch? The watch is "unbranded", but I paid $30 US for it. Can you help me?
Nice demonstration on replacing the two batteries for this watch. Now my question is once you swap out the cells and reassemble the various plates , cover and band after tightening all the screws down. Would you still be able to use this watch under water at the depth ATM level that it is rated at? Inquiring minds want know.
That is an excellent question Maxoman427. This is the China made unbranded watch. We have never tested the water resistance level of it. However, normally if the process of replacement of the batteries are done right that should not affect the water resistance of the watch.
However, in certain situations if there is a real concern the extra silicone may be applied to the gasket before putting the back of the watch together.
Sincerely,
TBTwatches Management
Thank you, what kind of battery is the bigger one for the analog part? 😊 CR2026? Thank you!
And the smaller one? Number is? 🙏🏻
Many Thanks.
It would help if you told us the two types/sizes of batteries being replaced!!!
For the analog past: battery is 377/626 (interchangeable numbers)
For the digital part is CR2025.
Thank you for your question.
Sincererely,
TBTwatches Management
He actually fitted a 364/SR621SW silver oxide and CR2025 lithium , a 377/SR626SW is the same diameter as the 364 but is thicker so it would stand to high if fitted.
@@tbtwatches1533 i suggest change the digital to save money ..forget the analog part ..
YOU ARE GREAT THX U
The most important part - how to loosen the stud from the bracelet without damaging it - is not seen properly because the focus is out of the picture.
Why you do not check something like this when uploading a video?
And why you do repair the watch with the original label on it? This paper label is always in the field of view.
And what are the numbers of the batteries? Which cells you have replaced????
By the way, you could have also named the battery types at the same time:
The large main battery for the digital display is a Maxwell CR 2016, 3V and for the analogue clock is a SR 626 SW, 1.55V battery.
Wow that was prompted for me 😂😂😂😂😂😂😂😂
amazing video.thenks
Sir please tell my watch is not showing time but hour and .minute hand (
( spicule)is working so it's a case of battery low or another problem happens plz telll
Grounding with tweezers?
Can you please make a video depicting the process of battery replacement in skmei 1155?
Thank you sir.
Very informative
What r the batteries for the watch? especially the little analog one?
can you show how to change the digital analogue of ga 2100 please its a huge requiest please
I Am not getting a battery of g- shock, can you help me for this?
You did good
What's the part number for the small analog battery?
The problem @ digital/analog watches is that after replacement of the digital platine unit, the LED light for the digital view is not working anymore, I do not find any failure. May anyone knows the problem and how to fix the issue?
I have the same issue. Did you find a solution?
@@ignacastro there are 2 small carbon rubbers around the platine, it seems that I lost it during exchanging the batteries, the problem is that I cannot find replacement rubbers, it seems that they must be conductive but I am not sure, the rubbers are necessary that the led background light works
you need to ac recharge the battery unfortunately there is no markings to indicate the ac recharge. im facing the same problem. the led failed to light up.
Is this watch waterproof
Isme alarm hai kya
i also replaced a new battery for the analog part and it worked the only problem is the backlight now is not working.the same problem happened on the other watch
help me fix it,thanks
@@nickpaji8528 Remove the back plate again and check that the pusher is not caught on the edge of the spring contact, if the module moved while fitting the battery it can sometimes get caught up. when you gently push the light button you should see it push against the flat of the contact on the module.
@@mrfixit100 thanks sir,i'll try your suggestion
I had the problem several times, the problem is that the rubber contacts were lost after replacement of the battery, look if there are any small rubbers with 3x5 mm you may lost
@@thomasq.1921 Hi, I see a small ruber that is 5 mm long and 1 mm thick. Is this the one you're referring to?. Where does it go?
What is the name of this whatch and what model is it?
Hello, sorry for taking little long to respond. This is a Chinese off brand watch Exponi.
This is the link for it: www.tbtwatches.com/exponi-sport-men-s-analog-digital-rubber-strap-watch-black-and-yellow-2.html
Sincerely,
TBTwatches Management
@@tbtwatches1533
hello what brand is the analog movement? In the watch exponi ?
how to reset "AC Operation"?
ive been trying to figure that out too but there is no marking to indicate ac recharge.
That really looks like too much work for replacing a battery
It may absolutely seem like that. However, we are here to offer our support, skills and experience if needed. :)
Sincerely,
TBTwatches Management
www.tbtwatches.com
@@tbtwatches1533 Helped me change the battery so a big thank you, however i did lose couple of screws! Watch going great now
😂si and I don't care for what I just did but I will fix it
not me or you
you are a police person with no worries about that any questions related or anything about it to be explained I anger you are not reachable and you are interested to see me again however I have been updated with my dear sup
Omg you did it so wrong, ppl do not do this ...
FAKE WATCH
Your better off just buying a new watch. They are 20 bucks for crying out loud.