Thank you! We just had this system installed today with three heads. We live in SW rural Oregon, so they will get used. Our old system was a regular heat pump with the old refrigerant and getting tired. It is so quiet!
The heating mode is confusing - the blower runs for 2 mins and then it suddenly stops (even when I turn the fan speed to 100% instead of auto). I’ve had no issues with the cooling in the summer but could you tell me what are the best settings for heating the room in the winter?
Are you sure that eye mode isn’t the “eco mode/occupancy sensor”.. I thought the same thing for awhile and then learned that hitting “set” until you see the little person is the “follow me” mode. Easiest way to tell is the hand held remote will display the room temp and the ductless unit will display “if on” the set temp
Thanks for making the vid! The white fins on mine aren't moving properly. I can see by looking at yours mine just aren't functioning like they should. They stutter while moving instead of smoothly up and down when they do try to move. Both symbols for vertical & horizontal, leds are all lit. Swing is definitely set to on. I do love this system so much better than the oil furnace but I really need them to swing properly to move the warm air around. Any ideas what could be wrong? Hey, also, did you try to connect this to the Carrier CliMate App? Supposedly, we can control these units from the app, like schedule when to turn on and off, temp etc. I tried, but the app couldn't see or connect with the unit. The app only gets 2 out of 5 star reviews unfortunately so maybe that why it didn't connect.
You have to get a WiFi dongle (usb stick) and plug it in the backside of the display at the indoor unit. Takes less than 5 min by an authorized service technician. They range from $200-$300+ installed.
@@paulm850 Would I have to do this even though I have a 4 unit system? Each remote has an an LED wifi symbol on the screen when I press the "Set" button. It shows a moon, a person and wifi symbol. So, not wifi capable already? Omg if each one needs its own that would cost $1000. FYI, you know more than the HVAC guys that came to my house.
A carrier installer just told me that the "boost" setting can't be used when in heat mode. I swear it did boost in heat mode. It lights the LED on. Boost isn't working on mine which is why I called them. Do you know if it should boost in heat mode or not? Thanks so much !
Mine wouldnt power off. I had to push button wait a few minutes..... repeated this several times...wait....changed temp to 85 degrees, push power again and then it finally turned off. I'm not sure what's going on
You may have a bad remote or possibly a bad board. I would turn the breaker off that supplies power to the outdoor unit for 10 seconds to do a full reset.
I'm having the same issue right now. It will not turn off and it is making alot of noise. Of course the repair offices are closed. I reset the breaker but that didn't help. It sounds like the hose is clogged. I looked everywhere to get the little square section off on the wall unit to try n unclog it but these carrier books are useless.
Can you set these to kick on and off when desired temperature is reached? The manual is confusing..mine is a bryant brand...it just continues to run...unless we shut it off?
The indoor fan will always run even at a low speed in order to pull air through the machine to register the temperature in the room. However, the outdoor unit will ramp up and ramp down or turn off as needed. I just set mine and forget it.
What I’m concerned about is it never shuts off? It just gets very cold in here and on the auto mode it doesn’t let you set the temperature you want … what am I doing wrong.. I use it only for AC
I just got my ac fixed and replaced the Freon. It was working for about a month, and then now it’s not getting cold again, maybe I accidentally locked it???
Press timer once, and you can select the number of hours until the unit will come on press the timer a second time, and you can select the number of hours until the unit will turn off
Thank you! We just had this system installed today with three heads. We live in SW rural Oregon, so they will get used. Our old system was a regular heat pump with the old refrigerant and getting tired. It is so quiet!
You may qualify for the $2,000 Federal Tax Credit with that system. Check IRS code 25C
The heating mode is confusing - the blower runs for 2 mins and then it suddenly stops (even when I turn the fan speed to 100% instead of auto). I’ve had no issues with the cooling in the summer but could you tell me what are the best settings for heating the room in the winter?
Ty very much for the video
Thanks--I can't find out anything about the timer function, is it just a countdown or can you set it to turn on after a delay?
Owner's Manual - Carrier www.shareddocs.com/hvac/docs/1009/Public/0A/OM-40MAQ-06.pdf
Are you sure that eye mode isn’t the “eco mode/occupancy sensor”.. I thought the same thing for awhile and then learned that hitting “set” until you see the little person is the “follow me” mode. Easiest way to tell is the hand held remote will display the room temp and the ductless unit will display “if on” the set temp
They have changed some of the settings over the past years for that function. See your owners manual for exact functions
Thank you now I know how to use it
Thanks for making the vid!
The white fins on mine aren't moving properly. I can see by looking at yours mine just aren't functioning like they should. They stutter while moving instead of smoothly up and down when they do try to move. Both symbols for vertical & horizontal, leds are all lit. Swing is definitely set to on. I do love this system so much better than the oil furnace but I really need them to swing properly to move the warm air around.
Any ideas what could be wrong?
Hey, also, did you try to connect this to the Carrier CliMate App? Supposedly, we can control these units from the app, like schedule when to turn on and off, temp etc. I tried, but the app couldn't see or connect with the unit.
The app only gets 2 out of 5 star reviews unfortunately so maybe that why it didn't connect.
You have to get a WiFi dongle (usb stick) and plug it in the backside of the display at the indoor unit. Takes less than 5 min by an authorized service technician. They range from $200-$300+ installed.
@@paulm850 Would I have to do this even though I have a 4 unit system? Each remote has an an LED wifi symbol on the screen when I press the "Set" button. It shows a moon, a person and wifi symbol. So, not wifi capable already?
Omg if each one needs its own that would cost $1000.
FYI, you know more than the HVAC guys that came to my house.
How do you take off follow mode so each ac has its own control. But we have the remote build into the wall
Mines in Celsius and I’m trying to switch to Fahrenheit, please help
In COOL mode, it never stops even if the temp is set at 80.
@@PeterThomas-sg8bq contact your installing dealer for a service technician to come out if the unit is not working properly
It runs inside because it needs to read the ambient temperature to anticipate start and stop of the compressor.
A carrier installer just told me that the "boost" setting can't be used when in heat mode. I swear it did boost in heat mode. It lights the LED on.
Boost isn't working on mine which is why I called them.
Do you know if it should boost in heat mode or not? Thanks so much !
@@Laura_B1111 www.shareddocs.com/hvac/docs/1009/Public/0A/OM-40MAQ-06.pdf
Page 8 states turbo or boost mode works in heat and cool
Big help for our aura carrier aircon👏
You get instructions? And if the HVAC company didn't give you an instruction booklet, where do you get it?
Owner's Manual - Carrier www.shareddocs.com/hvac/docs/1009/Public/0A/OM-40MAQ-06.pdf
Mine wouldnt power off. I had to push button wait a few minutes..... repeated this several times...wait....changed temp to 85 degrees, push power again and then it finally turned off. I'm not sure what's going on
You may have a bad remote or possibly a bad board. I would turn the breaker off that supplies power to the outdoor unit for 10 seconds to do a full reset.
I'm having the same issue right now. It will not turn off and it is making alot of noise. Of course the repair offices are closed. I reset the breaker but that didn't help. It sounds like the hose is clogged. I looked everywhere to get the little square section off on the wall unit to try n unclog it but these carrier books are useless.
Can you set these to kick on and off when desired temperature is reached? The manual is confusing..mine is a bryant brand...it just continues to run...unless we shut it off?
The indoor fan will always run even at a low speed in order to pull air through the machine to register the temperature in the room. However, the outdoor unit will ramp up and ramp down or turn off as needed. I just set mine and forget it.
Thanks for the information!
What I’m concerned about is it never shuts off? It just gets very cold in here and on the auto mode it doesn’t let you set the temperature you want … what am I doing wrong.. I use it only for AC
I just got my ac fixed and replaced the Freon. It was working for about a month, and then now it’s not getting cold again, maybe I accidentally locked it???
@@abbyrashelle the Freon should never have to be replaced. The system has a leak somewhere that a tech needs to find
is the remote also the actual thermostat?
@@KathrynHowe-o4g no, it reads the temperature from a sensor at the head unit on the wall to measure return temperature
Does it oscillate on heating function? 4:40
Unfortunately, no
It makes noice outside
So how do you turn off your unit when it will not turn off
@@triptonmiller8532 I would reset the breaker for 10 seconds and turn it back on. You may have a bad board, consult your local carrier dealer.
How do I change Celsius to Fahrenheit?
Mines is too did you ever figure it out
Do you know how to unlock the remote? The unit at work is set to 65° and the remote is locked, and customers are complaining.
Looks like you press both Boost and Humidity together to toggle lock off and on.
@@steveboston6889 thank you so much!
I've read manual and I'm still totally confused. Plus, my filter comes out the front of the unit.
So Carrier/Bryant has 3 lines: comfort, performance, and Infinity. The one in the video is a Performance model. You may have the comfort model
Let me know what confusion you have and I’ll try to help
Where is the FP button
I put the fan on and now can’t get it off? I want heat and it’s just blowing cool air
Walk through all the steps again and set it to Auto
wht about tha timer
Press timer once, and you can select the number of hours until the unit will come on press the timer a second time, and you can select the number of hours until the unit will turn off
@@paulm850 i do manytimes but the aircon is not turning off pls do i video tutorial pls thanks advance
Mine says BRYANT.
Carrier and Bryant are made in the same factory, and are the same as Chevy and GMC or Ford and Lincoln. It’s the same thing.