thank you for watching i hope this video was helpfull if you enjoy my videos or have any questions you know what to do follow me on instagram: / aleks_mechanics
Best wheel bearing replacement I ever seen thanks my brother you are the best I'm getting ready to go out there and put mines on right now I been trying to get shops to put it on but they want unless I buy the part from them but I already ordered my own part..thanks bro..👍🏾
Thank you for posting this video, it literally saved me a BIG PARTS BILL, as my ball joint was seized to the aluminum lower control arm. With this video I was able to replace the wheel bearing without replacing the ball joint, lower control arm, bushings or related bolts. With saying this, the video does NOT tell you a few important things, such as you have to turn the steering out toward the side that you are working on, in my case to the left about 1 full turn. Still the stub axle did not have sufficient room come out, as it was making contact with the sway bar end link. I had to jack up both sides of the Tiguan to relieve the tension on the sway bar, then loosed the left sway bar end link to get enough room to remove the stub axle from the bearing that gave access to remove the 4 M12 Triple Square bolts that fasten the wheel bearing
Really good video! Thanks. I was able to replace my front wheel bearings on my Tiguan. However It took me many hours just to take out the part. It was sticking together tightly. I had to use hammer with full power. (I assume that I messed the wheel alignment up). I found that there was a tool (after finishing the job) to pull the bearing in the market or you can rent it for free from Auto Zone. I also had hard time to taking out and re - inserting the wheel joint. It took me two days to finish including replacing the break pad. Thanks.
your videos are really good, it is disappointing to see that you have so little views, anyway keep it up!!! ( i find you from your comment to a video of garage 54 )
Hej! Jag planerar att byta hjullager bak på min Skoda Octavia mk3 2015 4×4, der ser ut som det är samma hjulupphängning och samma platform. Har du bytt bakre hjullager?
Eg har ikke byttet hjullager bak på skoda enda, men det vil komme en video om det til slutt. Tusen takk for du såg på videoen min og for at du sjekket ut kanalen min, det setter eg veldig stor pris på! Work safe!😎👍🏼
@@Aleks_Mechanics you used a torque wrench at the end for you wheel bolts but the bolts actually securing your hub to the axle and suspension you did by feel? 🤔
@@feinschmegga yes, i need a different one for the tourqe range of those bolts, the wrench for the lug bolts are to high to be accurate on bearing bolts. I'll get the right one soon👍🏻
The guy in the store wasnt sure but he told me 150Nm +180° on the 4 bolts for the bearing housing, and 200Nm on the axle bolt. I just tightened them all to what i felt was tight enough. Cause i couldnt find any specific numbers anywhere, not even in the box the bearing came in. Good luck, and thanks for your question!👍🏻
Best wheel bearing replacement I ever seen thanks my brother you are the best I'm getting ready to go out there and put mines on right now I been trying to get shops to put it on but they want unless I buy the part from them but I already ordered my own part..thanks bro..👍🏾
Thank you so much! I hope it went well for you!😎👍🏼
Thank you for posting this video, it literally saved me a BIG PARTS BILL, as my ball joint was seized to the aluminum lower control arm. With this video I was able to replace the wheel bearing without replacing the ball joint, lower control arm, bushings or related bolts.
With saying this, the video does NOT tell you a few important things, such as you have to turn the steering out toward the side that you are working on, in my case to the left about 1 full turn. Still the stub axle did not have sufficient room come out, as it was making contact with the sway bar end link. I had to jack up both sides of the Tiguan to relieve the tension on the sway bar, then loosed the left sway bar end link to get enough room to remove the stub axle from the bearing that gave access to remove the 4 M12 Triple Square bolts that fasten the wheel bearing
Awsome dude, i'm glad that my video helped you out👍🏻 consider subscribing, more content will be coming💯🚘
Really good video! Thanks. I was able to replace my front wheel bearings on my Tiguan. However It took me many hours just to take out the part. It was sticking together tightly. I had to use hammer with full power. (I assume that I messed the wheel alignment up). I found that there was a tool (after finishing the job) to pull the bearing in the market or you can rent it for free from Auto Zone. I also had hard time to taking out and re - inserting the wheel joint. It took me two days to finish including replacing the break pad. Thanks.
Thank you so much!, im glad the video helped you. There will be more videos when something else goes bad on my car, or someone else's car😎👍🏻
Awesome. This helped me out. Thanks man.
Thank you so much!!, Im glad that the video was helpfull, stay tuned for more videos!👍🏻
Great video! You are an professional expert!
I don’t want any part of that, off to my mechanic
Thank you so much, im glad you liked it!👍🏻 there will be more videos soon!
your videos are really good, it is disappointing to see that you have so little views, anyway keep it up!!! ( i find you from your comment to a video of garage 54 )
Thank you!! I'll keep making videos like these, i'm glad you like them 👍
Tanks 👍
You're welcome, Thank you for subscribing, it means alot to me!😎🤝😎
Nice video, I need to do that work and it's going to help me a lot.. I have a question, this it's a volkswagen tiguan AWD or FWD? THANKS
Im glad you liked the video, my tiguan is a 4motion AWD👍🏼
Hej! Jag planerar att byta hjullager bak på min Skoda Octavia mk3 2015 4×4, der ser ut som det är samma hjulupphängning och samma platform. Har du bytt bakre hjullager?
Eg har ikke byttet hjullager bak på skoda enda, men det vil komme en video om det til slutt.
Tusen takk for du såg på videoen min og for at du sjekket ut kanalen min, det setter eg veldig stor pris på!
Work safe!😎👍🏼
Nice work do you remember what you torques the bolt to?
Hey There, Thank You So much😄 Im Glad You Like My Video, I Just Tightened Those Bolts By Feel👍🏻
@@Aleks_Mechanics you used a torque wrench at the end for you wheel bolts but the bolts actually securing your hub to the axle and suspension you did by feel? 🤔
@@feinschmegga yes, i need a different one for the tourqe range of those bolts, the wrench for the lug bolts are to high to be accurate on bearing bolts. I'll get the right one soon👍🏻
Hey what are the sizes you are using? And when you torque it down by how much?
Really need an answer as I’m about to do this to my car
The guy in the store wasnt sure but he told me 150Nm +180° on the 4 bolts for the bearing housing, and 200Nm on the axle bolt.
I just tightened them all to what i felt was tight enough. Cause i couldnt find any specific numbers anywhere, not even in the box the bearing came in.
Good luck, and thanks for your question!👍🏻
@@Aleks_Mechanics what about the sizes?
I show all socet and bit sizes to the camera, before unscrewing👍🏻