Great idea to use the quarters; I'm glad I found this video. I just ordered a center stand for my V-Sstrom 800, so I found this video searching for a video for my specific bike. Thanks for the tips and tricks.
Done a few drum brakes on cars. The one tool I have used many times for pulling springs is called a drum brake spring hook tool. Basically a hook with a handle on it. $10. Well worth having for this job. It's made for pulling stupid strong springs.
Bro, you saved me with this video. The instructions that came with the kit are shit. The springs were difficult but manageable with a large needle nose pliers. Thank you for your service. Apparently not all heroes wear capes 😊
good video. I tackled it without any other knowledge. The stand is used, and the spring stretched out. where to find new standspring about 5" long. Thanks for the video.
Hey Josh question for you, does the chain contact the center stand when the bikes on the side stand? I have the SW Motech and just noticed mine does. I don't think it does when i'm riding, but now i'm doubting myself!
The chain *should not* touch anything than the sprockets and (if loosen, the plastic laminate below it). Imagine you touring your bike and reaching similar angle as when on the side stand, your chain ripping center stand?? OEM item does not offer that issue.
@@ridingwithjosh4364 install complete. left side sits 4mm higher then right side when on centre stand. all bushes etc greased, stand is STIFF, difficult to lift, and drop. ( stand was from the wreckers, all bolt holes lined up easy, no clearence issues) 🤯🤯
Using the coins was a good idea. I'm still waiting for my OEM stand to arrive and I am *not* looking forward to that PITA spring installation! Thanks for the video.
@@ridingwithjosh4364 ok just installed it. The video helped a lot and I used lock tight. Actually the installation of the rubber stopper was hard. The springs were easier with a Spring Pully I got on Amazon. But its cheap $10 so it already started to bend. But it did its job. Chain adjustment are now easy.
I don't know what the pricing is like in the states but here the UK the oem stand is an absolute rip off. Cheapest I could find it was £283 so I fitted the sw motech it was £173 and is really high quality and super heavy duty. Anyway your bike looks really good man wish you many happy miles.
@@ridingwithjosh4364 it's a good bit of kit for sure. Had the oem stand been cheaper though I would have bought that. My only complaint with the sw motech is instead of having a spring each side it has a really heavy duty double spring on one side and as you can imagine it was an absolute nightmare to pull.
Great idea to use the quarters; I'm glad I found this video. I just ordered a center stand for my V-Sstrom 800, so I found this video searching for a video for my specific bike. Thanks for the tips and tricks.
I found that install the Rubber Bumper before installing the “F” plate, on the bench, much easier. Thank you for this video!!!👍🏼👍🏼
Done a few drum brakes on cars. The one tool I have used many times for pulling springs is called a drum brake spring hook tool. Basically a hook with a handle on it. $10. Well worth having for this job. It's made for pulling stupid strong springs.
Bro, you saved me with this video. The instructions that came with the kit are shit. The springs were difficult but manageable with a large needle nose pliers. Thank you for your service. Apparently not all heroes wear capes 😊
Thank you! Ride safe
good video. I tackled it without any other knowledge. The stand is used, and the spring stretched out. where to find new standspring about 5" long. Thanks for the video.
Very helpful video. Thanks!
Where you get the complete kit? I see one on Amazon it's OEM but it doesn't show the brackets,bolts,or springs.
Hey Josh question for you, does the chain contact the center stand when the bikes on the side stand? I have the SW Motech and just noticed mine does. I don't think it does when i'm riding, but now i'm doubting myself!
The chain *should not* touch anything than the sprockets and (if loosen, the plastic laminate below it).
Imagine you touring your bike and reaching similar angle as when on the side stand, your chain ripping center stand?? OEM item does not offer that issue.
@@etnermontilla I got it all sorted out, user error ;)
great video. will be doin this install soon. any other tips, things u may have done different ( i know its been 2 yrs) thanks👍
I would get a good spring puller or someone to slide in the coins!!! Other then that pretty simple
@@ridingwithjosh4364 install complete. left side sits 4mm higher then right side when on centre stand. all bushes etc greased, stand is STIFF, difficult to lift, and drop. ( stand was from the wreckers, all bolt holes lined up easy, no clearence issues) 🤯🤯
Thanks Josh getting ready to do this now. 👊
Using the coins was a good idea. I'm still waiting for my OEM stand to arrive and I am *not* looking forward to that PITA spring installation! Thanks for the video.
From what company do you have your black big crash bars? Im in Germany and new owner of 2018 V-strom 1000. Looking for good crash bars :)
Heed
@@ridingwithjosh4364 Nice thanks for the answer. Think i will buy Heed and the engine guard under it to from Heed^^
Do you need to use lock tight on the screws. I ordered mine cant wait.
Optional. I went back and did it
@@ridingwithjosh4364 what grease did you use or recommend. Sorry for the questions im a noob at these things.
@@ridingwithjosh4364 never mind looked up yours and what EP stood for. Ordered lock tight, spring pully, and EP Grease.
@@ridingwithjosh4364 ok just installed it. The video helped a lot and I used lock tight. Actually the installation of the rubber stopper was hard. The springs were easier with a Spring Pully I got on Amazon. But its cheap $10 so it already started to bend. But it did its job. Chain adjustment are now easy.
@@Sht855 good deal! Glade you were able to install it. Safe riding and enjoy the easy chaine services
I don't know what the pricing is like in the states but here the UK the oem stand is an absolute rip off. Cheapest I could find it was £283 so I fitted the sw motech it was £173 and is really high quality and super heavy duty. Anyway your bike looks really good man wish you many happy miles.
Thanks! I like the SW stand. Kinda wish I had gotten it.
@@ridingwithjosh4364 it's a good bit of kit for sure. Had the oem stand been cheaper though I would have bought that. My only complaint with the sw motech is instead of having a spring each side it has a really heavy duty double spring on one side and as you can imagine it was an absolute nightmare to pull.
@@markjackson7650 I'm sure that was a nightmare!
salam je ne sais pas faire de la moto 🙉🥺