Justin, I also have the same stage 2 whipple on my 19GT. Put in the CS and OPG for added securty the same as you. You running 10.21 at 137mph is pure baddass considering your cars weight and temp. Cooler day and I promise you will go 9.99, you already have the mph..Congrats my friend.
I was waiting for this. Congratulations Justin on your Supercharged stang. Really excited for Stage 4. If you plan to improve it further. You could add a oil separator. I want to see more builds. Stoked on the this year make a wish build.
Nice, congrats! Now you need to upgrade the half shafts before you go to the track again. They're known to snap even N/A so launching it like you did there is a matter of when not if. They'll last long on street use or trips to Mexico but at the track they'll snap on you. The 10r80 is fine till you consistently go 750+whp and that'll be 3rd gear that's going to check out eventually. Enjoy in great health!
It's not a common problem with the new mustangs to have the lower splitter come apart but rather a very common problem with that aftermarket lower grille. The metal tabs used in that lower grille can't hold up to high speeds and it's extremely dangerous. I had the same lower grille and the exact same problem, went back to factory lower grille and problem solved. There needs to a warning on that product. For reference I have a 3.0 whippll as well and trapped 138mph and my bumper also came apart...lol..awesome run man. On just E85 I ran 144mph, same pulley.
That set up will keep you enjoying the track tnts and not have ti really worry about getting kicked off all the while no fuel tune swaps needed. Good job
That's what my buddy and I were talking about- he's got a big block Chevelle with a bunch of Nitrous and he is jealous of the simplicity of this setup. -Justin
Car's more than likely only seeing 10-11lbs max with the header setup- and Jon said the car is VERY happy on 93, as the numbers indicate. Thanks Sergio! -Justin
I know on the s197 coyotes there's an electric water pump, I wonder if there is one for theS550? because that is something that you could install as well as a standalone instead of the add-on...
I really hope they switched to billet/forged oil pump gears for the gen 4 coyote on the new mustang. Crank sprocket possibly too. Being able to just throw on a supercharger without tearing into the engine would be so much nicer. Even if it's just for the Dark Horse motor they need to upgrade those internals from the factory.
You don’t need to tear into the motor unless you plan on being one of these kids who just sits there doing a burn out while bouncing off the rev limiter. That’s what taxes oil pump gears. I and many other people have an identical setup to the one in this video, and we don’t have/ require oil pump gears, or a crank sprocket. It’s a wide spread myth.
@@guthrie_1 You most likely don't but considering that's what Ford does on their upgraded Aluminator crate engines that are built to be boosted, it'd be a welcome peace of mind upgrade.
@@caseymurray7722 The point of his comment was he doesn’t want to have to tear into the internals if he doesn’t have to. The answer is, he does not have to.
@@guthrie_1 I understand that he doesn't need to upgrade them to be reliable. I was just saying that since it is a weaker part that is know about, it would be nice to see them upgraded on future engines, especially on performance versions like the dark horse.
@@caseymurray7722 It’s an unnecessary added expense for a production vehicle. For a purpose built race crate engine from the factory? Sure. Pass the unneeded expense to the customer. There are plenty of 1000+ horsepower builds out there running stock oil pump gears. If you are the kind of low IQ individual who likes to bang off the rev limiter and enjoys sideshows then yes you should upgrade, but I’d rather see their engines explode anyway
Moving Out! Hey Justin, you should reach out to Alex from Lund. I know he’s mentioned before that he’d Love to do show with you. I think it would be an awesome time! Once again, Bad Ass! Enjoy!
just got a 2020 procharged gt with 4k miles on it!! i love the procharger cause normal cruising it doesn't drive insane which is awesome for me cause its my new daily!!! but, anything I should worry about longterm? any maintenance I should watch for or anything? I've owned 2 other mustangs BUT this is my first modded one. thanks!
You bought it already modified? Who tuned it? What other supporting mods do you have? How much boost are you running? These are important questions you need to answer first.
How’s the motor holding up? Especially with the famous typewriter tik. As well how is that 10 speed holding that power?! Also how well does that supercharger spin with those high revving coyotes vs say a procharger?
No tick here, shes going strong. And Jon told me these things start to slip around high 700, low 800 so I think I'll be ok for a bit at this level. Thanks for watching Chris! -Justin
Forgestar D5 Beadlocks with matching skinnies up front. Mickey Thompson Sportsman S/R skinny tires and a Mickey Thompson ET Street R Radial in the rear. -Justin
I’ve never gotten behind the wheel of my 722 WHP coyote and thought “man, if only I had more torque”. It has enough torque to make you shit your pants at 2,500 RPM.
What do you want to see next?! Let us know below!
Subscribe For New Mustang Videos Daily: muscle.am/SubscribeAMyt
You race the mach e
@StangGiant we already did! ruclips.net/video/xUJY8EkIpDg/видео.html
Do a show with on the Lund Racing cars !
Justin, I also have the same stage 2 whipple on my 19GT. Put in the CS and OPG for added securty the same as you. You running 10.21 at 137mph is pure baddass considering your cars weight and temp. Cooler day and I promise you will go 9.99, you already have the mph..Congrats my friend.
How’s the 10R80 holding up?
I was waiting for this. Congratulations Justin on your Supercharged stang. Really excited for Stage 4. If you plan to improve it further. You could add a oil separator. I want to see more builds. Stoked on the this year make a wish build.
Nice, congrats! Now you need to upgrade the half shafts before you go to the track again. They're known to snap even N/A so launching it like you did there is a matter of when not if. They'll last long on street use or trips to Mexico but at the track they'll snap on you. The 10r80 is fine till you consistently go 750+whp and that'll be 3rd gear that's going to check out eventually. Enjoy in great health!
Already done brother- watch stage 2 😉. -Justin
They already put in ford performance half shafts and a carbon fiber driveshaft
Been waiting for these videos need more like this 🙌
Agreed! Thanks Focused! -Justin
Can't wait to see what comes next! Awesome run!
Thanks for watching! -Zach
That was awesome!
Thanks for watching! -Zach
Love my gen 5 whipple 11k boosted miles and not a problem to report
That's what we like to hear! Thanks for watching! -Zach
awesome car 10.20 real world not many bikes go much faster than that short wheel base ive done many 10-1 and 10-2 w my zx14 and r1. nice vid.
Thats awesome to hear- I need to go hunt a few bikes down! -Justin
Oh yeah, when the tree drops, you really need to be dickin around with the hand-brake on an automatic with a brake pedal 😆😆😆
It's not a common problem with the new mustangs to have the lower splitter come apart but rather a very common problem with that aftermarket lower grille. The metal tabs used in that lower grille can't hold up to high speeds and it's extremely dangerous. I had the same lower grille and the exact same problem, went back to factory lower grille and problem solved. There needs to a warning on that product. For reference I have a 3.0 whippll as well and trapped 138mph and my bumper also came apart...lol..awesome run man. On just E85 I ran 144mph, same pulley.
That set up will keep you enjoying the track tnts and not have ti really worry about getting kicked off all the while no fuel tune swaps needed. Good job
That's what my buddy and I were talking about- he's got a big block Chevelle with a bunch of Nitrous and he is jealous of the simplicity of this setup. -Justin
I always thought 10 psi was max on 93 pump gas. Better always be running some octane booster if you’re going to be staying in the 12-13 lbs zone!
Car's more than likely only seeing 10-11lbs max with the header setup- and Jon said the car is VERY happy on 93, as the numbers indicate. Thanks Sergio! -Justin
10.2 on 93 and 3.8 pulley can’t be mad at that. Car can easily go 9s on a cooler day!
Can't wait for some mine shaft air here this fall- hoping it does it! -Justin
You guys should do more things with the 2011 They all forget the old Mustangs
Holy cow, she really squats on that launch! Great driving in that beast, Justin! Love from India 🇮🇳🇮🇳
It's been awhile!
You're telling me! COVID kinda derailed us for a bit there but we're back! -Justin
That was badass Justin 🙌🏽💪🏽
Thanks for watching! -Zach
Beautiful setup
Thanks for watching! -Zach
Great video, I like when you guys post videos like this 👌👍🙏
Thanks a bunch for watching! -Zach
I know on the s197 coyotes there's an electric water pump, I wonder if there is one for theS550? because that is something that you could install as well as a standalone instead of the add-on...
Drop some weight and some colder weather and you will be well into the 9's it's so damn easy on these new mustangs as well. I can't believe it.
I really hope they switched to billet/forged oil pump gears for the gen 4 coyote on the new mustang. Crank sprocket possibly too. Being able to just throw on a supercharger without tearing into the engine would be so much nicer. Even if it's just for the Dark Horse motor they need to upgrade those internals from the factory.
You don’t need to tear into the motor unless you plan on being one of these kids who just sits there doing a burn out while bouncing off the rev limiter. That’s what taxes oil pump gears. I and many other people have an identical setup to the one in this video, and we don’t have/ require oil pump gears, or a crank sprocket.
It’s a wide spread myth.
@@guthrie_1 You most likely don't but considering that's what Ford does on their upgraded Aluminator crate engines that are built to be boosted, it'd be a welcome peace of mind upgrade.
@@caseymurray7722 The point of his comment was he doesn’t want to have to tear into the internals if he doesn’t have to. The answer is, he does not have to.
@@guthrie_1 I understand that he doesn't need to upgrade them to be reliable. I was just saying that since it is a weaker part that is know about, it would be nice to see them upgraded on future engines, especially on performance versions like the dark horse.
@@caseymurray7722 It’s an unnecessary added expense for a production vehicle. For a purpose built race crate engine from the factory? Sure. Pass the unneeded expense to the customer.
There are plenty of 1000+ horsepower builds out there running stock oil pump gears.
If you are the kind of low IQ individual who likes to bang off the rev limiter and enjoys sideshows then yes you should upgrade, but I’d rather see their engines explode anyway
Bullshit on the OPG. You don't need to change them unless your doing burnouts off the limiter or on a trans-brake.
Is there a cheaper power option that will put me around 550-600 HP?
Nitrous is great when done right
Awesome build Justin, love it. Congrats, enjoy it.
Thanks Sig- always good to hear from you! -Justin
Moving Out! Hey Justin, you should reach out to Alex from Lund. I know he’s mentioned before that he’d Love to do show with you. I think it would be an awesome time! Once again, Bad Ass! Enjoy!
just got a 2020 procharged gt with 4k miles on it!! i love the procharger cause normal cruising it doesn't drive insane which is awesome for me cause its my new daily!!! but, anything I should worry about longterm? any maintenance I should watch for or anything? I've owned 2 other mustangs BUT this is my first modded one. thanks!
You bought it already modified? Who tuned it? What other supporting mods do you have? How much boost are you running?
These are important questions you need to answer first.
are we gonna see another mustang vs mustang drag race? but with this mustang :D.
Our host Jake just got a new GT, we just need to convince him to start modding. Maybeeeeee. 😉 -Zach
Did you notice worse handeling the in corners without the strut tower braces?
You haven't bought hood struts yet???
Saludos, tengo un Mustang 2015 6V. Se puede hacer turbo??
You need the transmission now to manage that power with.
Last time I went to the track here the DA was over 5500! I wish my DA was as low as yours lol
Really hoping to do a super charger in my 2020 but was worried about the transmission, any advice brotha!?!?
Need to put it on e85! Be 9s all day!!
Fun video!
Thanks for watching! -Zach
Awesome👍👍
Thanks for watching! -Zach
Very nice! 🇺🇸
Thanks for watching! -Zach
Does car have wheel hop support kit?
What happened to Stephanies TT 5.0?
Let's see the 14 vs 19 match at the track
AWESOME VID...PRO
Thanks for watching! -Zach
Maybe you lost the front chin,
Lip wtv we call it. Because it’s not oem?
What size tire is in the back
Welp…. 2014 Mach 1 it is for graduation 👩🎓 since i have a 2019 GT…..
How’s the motor holding up? Especially with the famous typewriter tik. As well how is that 10 speed holding that power?! Also how well does that supercharger spin with those high revving coyotes vs say a procharger?
No tick here, shes going strong. And Jon told me these things start to slip around high 700, low 800 so I think I'll be ok for a bit at this level. Thanks for watching Chris! -Justin
Any suspension work done
Suspension work was all done in stages 1 and 2 of the build! -Zach
Also, did you need more air managment to keep her cool?
Like what?
If you would have lowered your tire pressure to 22 psi in the rear tires it would have ran 10.0 seconds flat down the race track.
👍👍
Thanks for watching! -Zach
Is Stephanie still a part of American muscle?
No she is not. Thanks for watching! -Zach
What is the wheel and tire combo on the car?
Forgestar D5 Beadlocks with matching skinnies up front. Mickey Thompson Sportsman S/R skinny tires and a Mickey Thompson ET Street R Radial in the rear. -Justin
@@americanmuscle 17” rear 19” front?
YESSSSS
Thanks for watching! -Zach
Sweet. I better get one before the government bans these and forces everyone into nerf golf carts.
😂😂😂 -Justin
What happened to Steph ?
Steph hasn't been with AM for about 5 years now. -Zach
Stock axles
I want a whipple kit, send me one
We would if we could! Thanks for watching! -Zach
Nice hp numbers but man those Coyote engines make no torque !!!
You ain't wrong haha. Although turbos would fix that. -Justin
I’ve never gotten behind the wheel of my 722 WHP coyote and thought “man, if only I had more torque”.
It has enough torque to make you shit your pants at 2,500 RPM.
Coyote engine? Weak points? You can’t put those words together.
He’s gonna be disappointed when this runs an 11 right off the trailer
Okay I forgot he actually did suspension
@@loweredyote8416 👍👍👍-Justin
Stephanie or GTFO
Stephanie hasn't been with AM for like 5 years now... just a heads up. -Justin
where is the #Manual to much auto stuff this is played out.
My last build was a manual, wanted to switch it up this time. -Justin
Do you still have that car?
@@tommyyancy3902 Unfortunately not- I sold it to fund some other projects. -Justin
😕. I been getting S550 fever, but can’t part with my 2014 GT. Plus S550 is another 10 grand for a clean one with good options and low miles.