because of the out and backwards angle of the rod holders, the pvc is applying force against the rod holders before, adding the forces from the bouyancy of the outriggers. adding a strap will hold it down, but there is still pressure against the rod holders. in my experience, screws holding the rod holders down will fail eventually. Its been 10 months since upload, so im curious about an update on these
I took my kayak and pulled the drain plug installed mag wheel Schrader valves and put about eight pounds are in them it held the Contour of the bottom of the boat and made it way more buoyant stable but when you're done let the air out or it'll expand the bottom your kayaks got horizontal or vertical ribs when you said it in the water and you said in it it concaves in the bottom the Aries what fixes it
because of the out and backwards angle of the rod holders, the pvc is applying force against the rod holders before, adding the forces from the bouyancy of the outriggers. adding a strap will hold it down, but there is still pressure against the rod holders. in my experience, screws holding the rod holders down will fail eventually. Its been 10 months since upload, so im curious about an update on these
I took my kayak and pulled the drain plug installed mag wheel Schrader valves and put about eight pounds are in them it held the Contour of the bottom of the boat and made it way more buoyant stable but when you're done let the air out or it'll expand the bottom your kayaks got horizontal or vertical ribs when you said it in the water and you said in it it concaves in the bottom the Aries what fixes it