Cool! The version with two valves is a really useful solution. Now there's no need to attach a second VCRT to the port just to block the flow to the vacuum gauge.
So far I started with smans. Then today I bought the whole probe kit then I ordered these core tools. I got their meter , gas pressure meter , and the vacuum guage too. Love their stuff. I trust the sc440 meter with my life. I won't use another meter. Might upgrade to the sc480 just for joblink tho
Fieldpiece only works with approved distributors. Find your nearest Fieldpiece distributor on our website: www.fieldpiece.com/where-to-buy/ or ask your local distributor or regional sales rep (at www.fieldpiece.com/representatives/) to contact us!
Fieldpiece wants to be everywhere you are and accessible to all HVACR pros! Find your nearest Fieldpiece distributor on our website: www.fieldpiece.com/where-to-buy/ or ask your local distributor or regional sales rep to contact us! www.fieldpiece.com/representatives/
Thank you for your patience, our team is working non-stop to stock distributor shelves as quickly as possible. We are thrilled at your response and are ramping up production to get more VCRTs in your hands.
Officially released! Find your nearest Fieldpiece distributor on our website: www.fieldpiece.com/where-to-buy/ or ask your local distributor or regional sales rep (at www.fieldpiece.com/representatives/) to contact us!
My experience with the VC2G has been AWFUL. I bought two of them from Trutech, and waited for months to receive them. When I finally got them, I was very excited to give them a shot. I’ve tried them on around 10 different units now, and I’ve successfully grabbed the core twice. I feel the tool grab the core, add a little more force to seat it in the hole, and successfully unthread it, but fail to actually grab/remove the core. I wind up using my old YJ tool instead, since that grabs the core on the first shot around 90% of the time. Very disappointing, considering their cost and Fieldpiece’s quality/reputation.
We're sorry to hear that! We want to make sure your experience with our tools is always top-notch, so we would appreciate the opportunity to make it right. If you have not already, please reach out to our service department at the number below, and they will take care of you! Phone: (714) 634-1844
we may have asked for them but we dont gotem yet like you say. you guys really screwed up on this product. Why advertise a product you cant even produce?
We sincerely apologize for the delay in shipping your order. We understand your frustration and are working diligently to fulfill all orders as quickly as possible. Our goal is to ensure you receive a high-quality product, and we are committed to making sure everyone receives their orders. Thank you for your patience and understanding. If you have any further questions or concerns, please feel free to reach out to our customer service team.
Cool! The version with two valves is a really useful solution. Now there's no need to attach a second VCRT to the port just to block the flow to the vacuum gauge.
Take my money! I need pairs! When will they start shipping?
Fieldpiece is number one in customer service ❤
Top notch instruments 👍
Looks cool! Send me some and I'll review them :)
Is the sight glass can clean?
So far I started with smans. Then today I bought the whole probe kit then I ordered these core tools. I got their meter , gas pressure meter , and the vacuum guage too. Love their stuff. I trust the sc440 meter with my life. I won't use another meter. Might upgrade to the sc480 just for joblink tho
Got the Vc2g, great bit of kit. Not the cheapest but well worth the money
Very x1000 impressive. Could i ask you that when you selling those thing from Amazon? Please im really willing to get them
Fieldpiece only works with approved distributors. Find your nearest Fieldpiece distributor on our website: www.fieldpiece.com/where-to-buy/ or ask your local distributor or regional sales rep (at www.fieldpiece.com/representatives/) to contact us!
I really like that one I will buy it as soon as I can
Very interested in these. Are they coming to Europe?
Fieldpiece wants to be everywhere you are and accessible to all HVACR pros! Find your nearest Fieldpiece distributor on our website: www.fieldpiece.com/where-to-buy/ or ask your local distributor or regional sales rep to contact us! www.fieldpiece.com/representatives/
Manda uma dessa pra mim aqui em Belém do Pará
annnnnnnnnnnnnnd now i need one
the vc2g is backordered everywhere!
Thank you for your patience, our team is working non-stop to stock distributor shelves as quickly as possible. We are thrilled at your response and are ramping up production to get more VCRTs in your hands.
What pressure is it rated up to? Not vacuum, pressure
Check out all the specs for all VCRT versions on our product pages: www.fieldpiece.com/product-category/valve-core-removal-tools/ :)
Looks awesome wish my boss wasn’t so cheap
When is the release date?
Stay tuned on our social channels for release info!
@@FieldpieceProducts got mine today
are they out yet?
Officially released! Find your nearest Fieldpiece distributor on our website: www.fieldpiece.com/where-to-buy/ or ask your local distributor or regional sales rep (at www.fieldpiece.com/representatives/) to contact us!
No, you cant get them, at least not the one with two valves. They didnt make enough
Does the vc2g come with the 5/16 fitting or is it sold separately
This 5/16 fitting is optional for the VC2G: www.fieldpiece.com/product/rvc5-5-16-swappable-port-fitting/
Take my money
Figures you gotta buy the swappable port separately.
Thanks for your comment, we'll share your feedback with our R&D team. :)
Deberían hacer más video en español, yo no sé mucho inglés ,saludos
My experience with the VC2G has been AWFUL. I bought two of them from Trutech, and waited for months to receive them. When I finally got them, I was very excited to give them a shot. I’ve tried them on around 10 different units now, and I’ve successfully grabbed the core twice. I feel the tool grab the core, add a little more force to seat it in the hole, and successfully unthread it, but fail to actually grab/remove the core. I wind up using my old YJ tool instead, since that grabs the core on the first shot around 90% of the time. Very disappointing, considering their cost and Fieldpiece’s quality/reputation.
We're sorry to hear that! We want to make sure your experience with our tools is always top-notch, so we would appreciate the opportunity to make it right. If you have not already, please reach out to our service department at the number below, and they will take care of you!
Phone: (714) 634-1844
Pretty cool the only problem is that they are huge
Thanks for your comment! We'll pass this on to our R&D team. :)
Just what the job called for. lol
Fucking amazing!!! This is innovative! This is incredible. This shits better than sex!
Shows it on a coremax fitting
It will not work on those
Thanks for your comment! We'll absolutely look into this.
we may have asked for them but we dont gotem yet like you say. you guys really screwed up on this product. Why advertise a product you cant even produce?
We sincerely apologize for the delay in shipping your order. We understand your frustration and are working diligently to fulfill all orders as quickly as possible. Our goal is to ensure you receive a high-quality product, and we are committed to making sure everyone receives their orders. Thank you for your patience and understanding. If you have any further questions or concerns, please feel free to reach out to our customer service team.