Bestway Above Ground Pool - 1st Time Pool Owner
HTML-код
- Опубликовано: 8 сен 2024
- I'm a first time pool owner. This video is the first in a series of showing tips and tricks that I have learned from other RUclipsrs and DIYers along with some of my own personal know-how and skills. This is a Bestway (Coleman) above ground pool that is 20 feet by 48 inches tall, with an Intex 16 inch sand filter with salt water chlorination.
thank you so much for theses videos amazing i have been looking for this and no one has the video that i exactly needed to make this work thank you thank you please keep making more of them 👍
Hope it helps. Check out my other video where I upgraded even further.
We had our pad built flat with a slight raise in the center so it would drain off and our pool is level all the way around. Plug off the other intake and your skimmer will work perfect. Just bleed the air out it works I promise. Use a Shepard hook to hold up your lines so they don’t pull on your liner.
Great tip! Thanks so much!
@@getitdone308 your very welcome!
I... love that ladder. I need that ladder. That looks super secure. Great video, thank you for the info!
Hope it helps! I have a video on my channel showing how to do it if you need.
Wooden ladder in a pool? You've got to be kidding!!
This is a very nice pool, im thinking about getting one. I haven't had a pool sine 2014 so it's been a while and it's been very hot in Michigan lately so I think it's a good time to get one.
I was very surprised by how well built it is. I would recommend upgrades to just about everything except the liner and frame though! Check out my other videos for how I turned this great pool into an awesome one.
The problem with a wooden ladder isn't so much that the structure will be lucky to survive two seasons as it is that wood in a pool has a tendency to seed molds and algae very quickly, no matter how closely you police the sanitation, pH and phosphate levels of your water chemistry.
I understand what you mean. However, after 2 seasons that hasn't been a problem. Further I built this because it was stronger...and MUCH cheaper than every "real" pool ladder out there. So even if it lasts only a few seasons, it's cheap/easy to rebuild (and much better quality).
Thank you for sharing. I just bought this same pool and size on Amazon. Good to know for a 1st time pool owner ☺️
Hope it helped!
Great video and explanation how you did it. Just warming if you have the link to purchase the T connector hose ? Thank you in advance
Thanks. Here's what I found: JomGorg Sand Filter T-Joint 1.5 to 1.25'' Hose Connector for Bestway for Coleman for Intex P61408 for Pool Hose Adapter for Filter Pumps a.co/d/fwQqaI3
I just bought the INTEX 26651EG SX3000 Krystal Clear Sand Filter Pump for Above Ground Pools, 16in. You talked about an adapter from 1.25" to 1.5", can you please let me know examples of it. I want to buy them but the ones in Amazon are currently unavailable. Thanks
I have a new best way 20x48 pool that I will be setting up this weekend. This is my first experience with a pool. How many bags of salt did you used when you first set up your pool? I have the 3000 intex pump, 15000 saltwater system, vacuum and intex skimmer. Do I need to add anymore chemicals apart from the salt and how soon after adding salt can the pool be use? I learnt a lot from your videos.. good job.
Glad the videos helped. The pool is about 8500 gallons (assuming you fill it up to about 4 inches below the rim). There are many quick tables to check to see how much salt is needed, but generally speaking, because you're starting with ZERO salt, you'll need to add about 215 lbs of salt (a little more than 5, 40-lb bags.
Remember, saltwater systems simply create chlorine for you (instead of having to add chlorine). This means that other chemicals may be necessary to control things like pH, alkalinity, algae, etc.
Usually after a couple hours, you can use your pool. The salt doesn't really hurt you at all. You just want your pump to essentially filter all the salty water before you swim. So the bigger your pump, the faster you can swim.
@@getitdone308 Thank you very much.
I am a first time pool owner too. I have the same pool but 18x48 and I have been watching your videos and I really appreciate all the ideas. You have helped me without knowing. So I have a question maybe you could help because since you have more experience and knowledge about these type of things. I bought a small water fountain at Amazon nothing fancy just a $24 sprinkle that supposed to be attached to the return but this water fountain is equipped with threads of 1.5” male & female, plus a 2.2” female adapter.
Do you have any recommendations what plumbing parts I can use to adapt this to our type of return because when you screw off the cover of the return it just has a big hole where the water comes into the pool. I’m not so good in measuring so I really don’t know what size it is, I just know it has no female/male threads on that end. So in the reviews I saw some people saying they had to buy some plumbing parts to the return in order to attach this but they don’t specify. I already asked a question on that side to see if I get an answer. But since you have done so many updates to your pool I wanted to know if you can give me any suggestions. Thank you so much in advance for all your help.
I'm not exactly sure what is needed, but if it's anything like converting metric to standard (which is what happens when you want to add plumbing parts to these pools), check out what I did at 8:25 on this video. ruclips.net/video/3_g5x9MCbTM/видео.html
@@getitdone308 Thanks a lot! I’ll follow your recommendations. Keep up with those great videos. They are very helpful! Do you have a video on the ladder you made? I know you mentioned in this video you used 2x4, 2x6 & 4x4 but did you make a step by step video? I’m planning on making one myself specially for my parents. They love the pool but the ladder is not safe for them. Any tips will be very appreciated. Thanks again for your videos and your recommendations.
I regret that I didn't make a video of the construction. Sorry. That said, I talked through it on the video I did have. Ultimately, it's "just" a wooden ladder on the inside, connected to an H-frame, connected to a stair system on the outside.
@@getitdone308 I’m definitely going to do this ladder. At least I have sort of an idea looking at your video. I screenshot it to keep in mind the kind of wood used. Thanks again.
Awesome video. Where did you get the mat for the ladder. Also, my intex pump is making a hissing noise with the gauge going up and down. not sure how to fix it.
I got the mat at Home Depot and cut it to size.
TrafficMaster Black 36 in. x 36 in. Rubber Anti-Fatigue Comfort Mat
www.homedepot.com/p/TrafficMaster-Black-36-in-x-36-in-Rubber-Anti-Fatigue-Comfort-Mat-KFTRM9191-1/206355967
SKU# 206355967
Regarding the pump...the hissing noise is likely air introduced into the line. That will cause the pressure to fluctuate. I fixed that by ensuring ALL connections are sealed/tight. I found that the biggest source of air getting into my line was when I used the cheap plastic Clamps by Intex.
Check out my latest video and you'll see how I made it so I improved my system...and removed all air.
Very Nice great size
Love it! Can't wait to put it up again in a couple months.
How far apart are the support legs on this pool and how many support legs?
I honestly don't know for sure. I think the legs are about 32" apart. It's a 20' pool.
@@getitdone308 we have the 20’x48” and are trying to get the cement slab footers leveled before we assemble pool. I can’t find anywhere the distance between the supports ):
Are you pouring concrete or using concrete pavers?
@@getitdone308 concrete pavers, don’t even know how many of those to put down 😫 it will be a miracle if our kids have a pool to swim in this Summer. We have absolutely no idea what we are doing…watching lots of RUclips
Understood. These are VERY EASY to set up. I recommend you set it up where you want it (no water...dry), count how many pavers you need, buy them, put them under the feet...then start leveling.
My large Intex plunger valves are both leaking out the top where the turning knob is.
That sounds to my like they're put together wrong.
Can find an answer to this anywhere.
If I set my pump and chlorinator to run every night for a set amount of hours, but then on a Saturday morning I want to manually run the pump to use my vacuum, will I then have to set my pump again that night to get it back on schedule? Or will it somehow continue with the previous set scheduling?
Depends on your pump. My Intex pump will start every day at the same time I last restarted it.
@@getitdone308 Sorry, forgot to mention I had the same Intex pump. So I guess the answer is that I would have to start it again that night to get it back on schedule.
What kind of fitting can I use on a standard 1.25 intake inlet to attach to a vacuum hose? I can’t for the life of me find one….I see you have one attached to your skimmer….
That one came with the skimmer. Likewise, depending on the vacuum, the attachment could come with it.
2 years later , how is your pool holding up. Thinking about getting this one
I'll be doing another video soon. But in a nutshell...it didn't hold up after last season. However, it was my fault.
My pump told me my salt levels were too low last year...so I added more salt. Turns out my pump was faulty, but the damage was done. Salty water + metal pool frame = rust. Too much rust, so I had to throw it away.
That said, I bought the same exact pool for this year. Why? Because I couldn't beat the price, and I plan to do a few things differently this year to prevent the rust (like don't be a dummy and just keep adding salt to the water).
Bottom line: for the price, you really can't beat this pool/system. There is nothing that even comes close.
Hi, is there a window on the side of the pool? An image I saw of the pool online has a window like hole on the side
I know what you're talking about. No, this one has no windows on the side.
Could you please provide a link with the filter you bought?
Sure thing! INTEX 26679EG QX2600 Krystal Clear Sand Filter Pump & Saltwater System for Above Ground Pools, 16in www.amazon.com/dp/B07TN3JQ2P/ref=cm_sw_r_apan_i_C2PSQEB059WX2W75Y3N1?_encoding=UTF8&psc=1
Hi there. I have a Bestway 12’ (39” deep) round pool installed. I converted to an Intex 26643EG sand filter 10”. It says it’s a .25hp motor. And, I also added a Hayward skimmer. I’d like to install a vacuum for it. The local pool company is not sure the motor is strong enough to install a manual vacuum using the current sand filter/skimmer. Can you help me out with some advice? Don’t want to spend on a hose/head/pole if it won’t work. But at the same time avoid a $300 manual handheld vacuum if it would work.
That depends on the vacuum you want. The vacuum itself will tell you what size it needs (how much power). At the end of the day, it's not the size of your pool that matters when it comes to vacuums...it's the size of your pump.
So...what vacuum are you considering?
@@getitdone308 Oh boy...lol...I didn't take pictures of what she was suggesting. It's just a basic pole with a hose and the vacuum head...like all in it was $90. I have an Intex 26643EG sand filter 10”. I don't need something that is done automatically for me, I can do it manually...so does it matter what the pump size is? All I need is for the hose to go in the strainer and then I can push the vaccuum around, but I guess it needs to suction...
Sorry, I find this complicated and confusing. But, I really appreciate the response and help!
Remember, the filter size has nothing to do with this. The filter does not move the water...the PUMP does.
There's 3 basic types of vacs. The easiest is the one you can get for less than $20 that hooks up to your garden hose. They're cheap...but work very well. Adds water to your pool and sucks everything into a bag. You have to push it around.
The next is an auto cleaner that hooks up to your pool outlet (where the water goes INTO your pool). It requires a specific PUMP size because it has to move enough water. Each vac will tell you the pump size needed.
The last is an auto vac that hooks up to your INLET (where the water sucks out of your pool). Same thing...needs a specific pump size.
I have used all 3. I just bought a Pentair Kreepy Krauly Lil Shark and really like it. I'll be creating a video soon on it.
I would use a Pool Blaster: www.amazon.com/dp/B001B3SKN4
That's pretty cool! I'll definitely consider it next year.
Hi I bought this I bought this same exact pool. How many people would say this pool can take?
Is it pretty big?
It's 20'. It holds a lot if people.
vent it needs air for suction!
I’m so OCD, I want to see this pool leveled even with a smooth no fold or creases on the bottom
I'm the same way. Smooth with no fold is easier than it may seem. Just get no more than 2 inches of water in it and kick towards the edge until it's smooth. Then fill it up.
My pool is only off by about an inch. It actually helped because, if you notice in my other video, I added an in-wall skimmer. It helped to put that skimmer on the "low water" end of the pool.
A wooden ladder in a pool. I can't facepalm myself hard enough to make that makes sense. Of all the DUMB shit I've seen people do, that one is #1.
I've had it in there for over a year. No problems whatsoever. What problems do you think it's causing?
@@getitdone308 Assume it's treated lumber since in the water. I assume means it'll put toxic chems in your pool that your liner, hardware, pump, pool chems, etc. aren't meant to be exposed to or remove...much less your body. Also, even if treated, won't wood rot & splinter due to prolonged water exposure? Which I'd guess would lead to many other issues as well. Idk but, just my guesses.
Yes. Treated. Check out this video...ruclips.net/video/s9BMckMSPjs/видео.html