Bro thank you for this. I've been making beats for almost 3 years now and I've always been struggling with getting sound crispy. I applied everything and am really pleased with how everything sounds.
Gem 👌👌👌I used the steps to master a beat i made and the mix turned out super clear 10x better also one of the easiest to understand mastering tutorials ive seen so far!!
Nice bro, my mastering is very similar. But there's no need to use a Soft Clipper after Maximus, as Maximus has it built in. Just adjust the 'Ceiling' knob to the left to -0.1db (Or wherever you want your output to be)
Bro..been watching you before jay cactus..and seeing you getting better day by day makes me feel like damn I can do that too you know am saying like.....God bless you and keep doing what you doing man..... And I wanna tell you that you leveled up alot and I want you to Make a video about mastering the beat..can you do that for your subscribers???
At the last step where you raised the GAIN nob in maximus, for me the DB on the master didnt go up instead DB in maximus went up and made everything distorded, why?
Damn, tutorial looks like gem, but is it ok if I use fruity limiter instead of soft clipper + maybe fruity balance? Besides, to post tracks to spotify, must I necessarily set my volume at -1 dB true peak?
What do you think about vocals with this technique for a whole master of a song compression on vocal chain and then add this technique to master or should you not compress in the vocal chain going this route ?? Have been mastering beats this way but want to move on to basting entire songs this method but need advice with adding vocals to the mix first then master the whole track. Compress vocals still to control peaks then route the vocal with the instruments to Maximus or don’t not compress the vocals in the chain ? And just add to Maximus if that makes since which way would be best if at all plz respond thanks bro
If I have a drill beat which has many left and right 808 notes panned and then I merge the low end, will my 808s sound the same in headphones or they'll be mono? I want them to be panned a bit but you said to merge it all the way down. Please kindly reply 🙏🏻
Maximus looks at the frequency spectrum of the entire song and just splits it up into the three bands, it doesn't look at specific instruments. Each instrument's sound can fall into a single band (usually very deep basses, high-pitched percs or high frequency melody layers) or might be present in all 3 bands (things like big thick pads and instruments, as well as some drums like the snare).
So when youve got all your sounds with effects on them and then you highlight them all and click route to this track only and then turn it down, does it still keep the effects on the sounds?
Yeah it should. Unless you have them in an effect bus or something. If the effect’s are on the track that your routing to the sub bus then yeah the effects will stay on it. 💯
Necromorph0 yeah. The same way he used it to master, you could use it for effects or whatever, everything linked to that track would have those effects on it.
Update: i dont even use headphones now with this technique. I know how my effects are going to work and where my levels usually sit. After this all my beats turn out cold asf. My problem was definitely that i didn't know how to master properly. I started out putting my soft clipper at the top of my chain instead of the bottom
Bro thank you for this. I've been making beats for almost 3 years now and I've always been struggling with getting sound crispy. I applied everything and am really pleased with how everything sounds.
Thanks a lot man! I'm just starting out with mixing and mastering and this is super useful! Stoked for more tutorials
Happy to help!
I've always used a fruity compressor with the preset fast compressor, then a stock limiter and a stock soft clipper
Nice man, that's a good combo
Ima try this
does this do the same effect as the video?
You helped me make some sense of the curves thingy on the left lol, i was always super confused about it, the compression
Gem 👌👌👌I used the steps to master a beat i made and the mix turned out super clear 10x better also one of the easiest to understand mastering tutorials ive seen so far!!
Thanks bro this was really helpful
No worries man 🙏🏼
THIS IS GOLD 🌟
thanks big up yo self 🇯🇲🇯🇲🇯🇲🇯🇲
Thank you brother I'm going to get to work on this style 💪🏿💯
Nice bro, my mastering is very similar. But there's no need to use a Soft Clipper after Maximus, as Maximus has it built in. Just adjust the 'Ceiling' knob to the left to -0.1db
(Or wherever you want your output to be)
imma try this and come back
best tut i found!!!!!!!!! greatjob!!
saved my life honestly
Thanks!
No worries man 🙏🏼
Crazy how much this changed my beat, definitely subbing
Thank you bro ☺️
Thank You 🙌🙌Very Helpful Video🔥🔥.
Thank you so much for this amazing tutorial !!!
THANK YOU SO MUCH!11!!!
Any Trap Beat Mastering Tutorial for Logic Pro X?
Great video man, learned some more about Maximus since I rarely use it! ✌️
Thank you so much... you are amazing
No worries man
Good shit bro ! this some gems
Ah glad it helped brother 🙏
Why don’t you the the thres on the master ?
amazing tutorial.. good work pal..!
"Another stock tutorial plugin" HAHAHA!!! Great video though bro bro!! This actually helped me IMMENSELY! Thumbs up homie!
Thanks man
Bro..been watching you before jay cactus..and seeing you getting better day by day makes me feel like damn I can do that too you know am saying like.....God bless you and keep doing what you doing man.....
And I wanna tell you that you leveled up alot and I want you to Make a video about mastering the beat..can you do that for your subscribers???
Thanks man👊
Nice tutorial bro!!
Ah glad it helped bro 👊
Llb save the day again
Thanks for this🙏🏾
thx a lot bro, very good tutorial. One more sub
No worries man 🙏🏼
Exellent teacher
super useful bro!
Glad it helped bro 👊
Question, before start the Maximus process, how many do’s should the beat be at around??
if you meant how many db's it should be at, anything under 0 in your main is good
Should I do this before I rap over the beat? Or just use the mixed beat to lay vocals on
Im honestly not too sure man, maybe after you've mixes the vocals into the beat properly
thx bro, good tutorial!
No worries man 🙏🏼
You didnt happen to make a video of making this beat? cuz its fire asf
such a good video
i did the same thing with every sound and my 808 sounds distorded ;/
At the last step where you raised the GAIN nob in maximus, for me the DB on the master didnt go up instead DB in maximus went up and made everything distorded, why?
it sounds like you have the limiter on in maximus, go to the ceiling knob and turn it to full in each band
Same
What speakers are those?
This is coated thx so much
Thx BRO!!!
No worries man
THANK YOU THANK YOU THANK YOU
Any time!
Damn, tutorial looks like gem, but is it ok if I use fruity limiter instead of soft clipper + maybe fruity balance? Besides, to post tracks to spotify, must I necessarily set my volume at -1 dB true peak?
Hi, would this technique work if I'm trying to master for Spotify? I heard streaming websites would turn things down quite a bit.
gxra 🐐🐐
Truth! He going far bro for sure!!
Did you have to adjust the pre and post knobs or did it do it for you??
You do it... I don't know what you mean bro, it's not automatic
What do you think about vocals with this technique for a whole master of a song compression on vocal chain and then add this technique to master or should you not compress in the vocal chain going this route ?? Have been mastering beats this way but want to move on to basting entire songs this method but need advice with adding vocals to the mix first then master the whole track. Compress vocals still to control peaks then route the vocal with the instruments to Maximus or don’t not compress the vocals in the chain ? And just add to Maximus if that makes since which way would be best if at all plz respond thanks bro
Wakaipa ❤❤
Awesome video🇧🇷
I think im bad at mxing lol the grapha for sound was way bigger
Just takes practice bro
Why was Maximus added to bus instead of master itself?
It isn't bro, it's on the master channel
LLB oh wow smh true just noticed!
guess what you are super hero 😅❤️
If I have a drill beat which has many left and right 808 notes panned and then I merge the low end, will my 808s sound the same in headphones or they'll be mono?
I want them to be panned a bit but you said to merge it all the way down. Please kindly reply 🙏🏻
🔥🔥🔥🔥🔥🔥🔥
👊🔥😊
You can't zoom in but you can maximize the window
Okay dope thanks bro
does Maximus automatically find which instruments are in which frequency range
Maximus looks at the frequency spectrum of the entire song and just splits it up into the three bands, it doesn't look at specific instruments. Each instrument's sound can fall into a single band (usually very deep basses, high-pitched percs or high frequency melody layers) or might be present in all 3 bands (things like big thick pads and instruments, as well as some drums like the snare).
Goooooood
My guy 🙏
why a sub bus??
So when youve got all your sounds with effects on them and then you highlight them all and click route to this track only and then turn it down, does it still keep the effects on the sounds?
Yeah it should. Unless you have them in an effect bus or something. If the effect’s are on the track that your routing to the sub bus then yeah the effects will stay on it. 💯
@@ProdByBallistic bet. Thank you. Whats an effect bus? Just the same thing with added effects?
Necromorph0 yeah. The same way he used it to master, you could use it for effects or whatever, everything linked to that track would have those effects on it.
Update: i dont even use headphones now with this technique. I know how my effects are going to work and where my levels usually sit. After this all my beats turn out cold asf. My problem was definitely that i didn't know how to master properly. I started out putting my soft clipper at the top of my chain instead of the bottom
How do you know how to get the master to 0?
Add a soft clipper after maximus and crank the master gain up to 0 db
🔥🔥🔥
Just a see dis video me gee
You talk a bit different
Good viddeo bro 🔥
Thank you brother 😊
🙏🙏🙏
SOY EL QUE 2000 QUE LE DI LIKE