Best exhaust for Yamaha Tenere 700?
HTML-код
- Опубликовано: 4 дек 2022
- I give free cookies for subscribers! 🍪😆
Disclamer!: I bought everything with my own money and paid for the install.
Blinkers:
clicknride.com.au/
NOTE THIS!: THESE BLINKERS BROKE AFTER 2000km, so I would NOT advice you to buy them.
Tailtidy:
HP - KIT PORTA TARGA + SUPPORTO + LED YAMAHA TENERE 700
SP-1 SHORT TITANIUM:
www.hpcorse.com/en/moto
Shop that sold and installed the parts:
motoholics.gr/
Sound of this pipe:
• Only Sound: Yamaha Ten...
All about Tenere 700: • Yamaha Tenere 700
💌 Contact & Discord info: linktr.ee/patchedbandit
📸 Instagram: / patchedbandit
🔥 I use RaceBox products to measure bike performances.
🔥 My affiliate code 'BANDITS15' gets you -15% at www.racebox.pro/store
🎸 I use Epidemic Sound. Free trial here: share.epidemicsound.com/jowrad
⭐️ Support my work by becoming a channel member here: / @patchedbandit
⭐️ Membership perks:
⭐️ ▸ Early access to new videos
⭐️ ▸ Loyalty badges
⭐️ ▸ Custom Emojis in comments
⭐️ ▸ Member perks on Discord 
Авто/Мото
You can support my work for only €0.99/month
Become a channel member here: ruclips.net/channel/UC6hGP2VIz2D_m4ZTpKGmLPAjoin
Unlock Perks:
- Early access to new videos
- Loyalty badges
- Custom Emojis in comments
- Member perks on Discord
One pf the most functional designs out there. Had mine about a year, full system, Good vid safe travels
Right on! It's very functional and I think it even looks better than the low pipe options :) Did you do something to the fueling when you did the full system swap? Thinking about that for next summer..
Thats shoud be the excellent placement of the exhaust.Just like the xtz660.❤
Love the video details and all angles up down sideways. Keep it up👍🏼👍🏼👍🏼
Thanks! :)
Looks rad and no mucking around with cutting the exhaust hanger like with the CamelADV option
Fully agree. This can always be swapped back to stock.
Sounds lovely!!
Arrow titanium 72649PK slip on full exhaust with Dna stage 2 air filter is the best sound ever !
Cheers from Greece ! A Tenere 700 lover !
I didn't like those side mounted exhausts on the T7. Almost anything sounds good with that CP2 engine.
Nice vid! I do love the look of that HP high set up... might need to switch! ✌
It is an agressive look and I love it! 😊
I’ve got the same one on order! Can’t wait to put it on. Also got the full header kit as well. Should shave about 6-7 kilos I think from stock.
Headers only are like -4.1kg so yeas its a massive drop! Are you going to do an ECU tune after? Im thinking about swapping the headers too.
@@PatchedBandit ecu tune? Possibly. It may be a bit tricky where I live though. Not a lot of specialized motorcycle stores here in Montana to my knowledge
Great video! Thanks!
Glad you liked it! 🙂✌️
I'm glad I live somewhere that has no restrictions on aftermarket parts because they don't emissions test them. We should be free to do what we want as long as it doesn't hurt anyone else.
Rules are fun to break 😋
Can't wait to get mine Fantastic Bike.
Its a beast with this pipe 🫨😃
Thanks WOW THAT'S AWESOME 🙃
Bella Italia 😍 The new muffler looks damn good and the sound is more mature, too.
Do you see any difficulties with the bags? Are they somehow getting closer to a warm part of the pipe or is the HP Corse even better compared to the OEM one?
Enjoy Greece while there is cold and snow in Finland, Bernd 💙💛🏁🤛🏼
Bags are staying a nice distance from the pipe but the strap going through the passenger footpeg is getting too close to the new pipe if mounted as instructed. I have just routed the strap from a different place and it has not been an issue.
This could also be fixed with kriega os footpeg eliminator set but I want to still have the option to ride with a pillion so not doing that :)
So no major issues.
Nice looks and good quality getting the hp corse slip-on! To me (subjectively) it sounded quieter than stock with the baffle in. When you showed the tail tidy comparison my first thought was that the pipe wont scrape, except the indicators will hit instead. Gladly the lights can be unplugged - something I’d be doing until i forget and then break lol 😅 btw did you ask to have the db killer made removable or did the mechanic offer? Just wondering how repair shop staff are these days?
Not sure which way it went as this was quite a while ago but they did it for me after a discussion we had.
These sound nice with decat headers and the baffle removed, not too loud.
I bet. At least with the cat and db killer in place the sound is very pleasant and I can’t really hear the exhaust at constant speed. But to me without db killer the sound was a bit too intrusive. I like it as it is now 😊
@Patched Bandit
I like to hear the bike and I find its still quiet if your gentle with the throttle.
Good video man, 2 questions. How do you like that bash plate and where did you buy those rub guards above your foot pegs? Thanks a bunch
Bash plate has worked like it should. I havent done any hard core log crossings or anything like that but it has had some dings from rocks etc. It's a solid peace of kit for sure. I go through all the mods before this trip on this video: ruclips.net/video/QzXiAtyu7eQ/видео.html
The frame guards are "Acerbis X-Grip Frame Protector". I show them a bit better on this video: ruclips.net/video/Ap3VvHYsngY/видео.html
Nice video! I saw that you also got the kriega OS bags and I'm curious if the heat from the high HP corse exhaust does not interfere with the bags? I'm thinking of buying both the kriega bags and the hp corse. Again, great video and thanks in advance!
Only thing is that I need to strap the pipe side lower strap a bit differently to the passenger footpeg. It's doable but it's not ideal. Doesn't bother me though and works great.
One thing that would fix the little annoyance is the kriega t7 passenger footpeg eliminators. I already bought them but never installed (yet). Maybe in the summertime when I try to make the T7 as light as I reasonably can I will take the footpegs off and install them instead.
@@PatchedBandit Thanks a lot for your quick response mate, very useful. It would be very much appreciated if you could do a quick review of the full setup (hp corse high mount + kriega OS bags) in one of your future videos! Cheers
Gone back and forth with the DB killer, as you said, just too loud. Better throttle response, but less torque down low. IMO
Was excited to see how your kreiga bags fit with the new pipe but you didn’t show!
So sorry :( I’ve been so busy lately I gorget things
I promise to do a video about the Kriega bags separately. It's gonna take some time as I purge my backlog of other videos though.
Looking forward tho that particular video as I would like to have the same combination in the future. Exhaust and the bags look so good :D@@PatchedBandit
Good video. How is your krega OS base working with this exhaust system?
It's good but I do route the footrest strap a bit differently on the exhaust side so it won't heat up. I could put it as it used to be but just in case it doesn't like the extra heat I put the strap in throug the little gap between the frame and the passenger footrest. This seems to be a fine solution.
Your latest subscriber here;-) I see you have the Kriega OS base. Any issues with the new pipe and the os base? Melting straps for example because close to the HP corse?
Only thing is that I need to strap the pipe side lower strap a bit differently to the passenger footpeg. It's doable but it's not ideal. Doesn't bother me though and works great.
One thing that would fix the little annoyance is the kriega t7 passenger footpeg eliminators. I already bought them but never installed (yet). Maybe in the summertime when I try to make the T7 as light as I reasonably can I will take the footpegs off and install them instead.
With the passenver footpegs gone it should be no issue whatsoever.
Thanks for the sub :)
@@PatchedBandit tx, think I will have a look at the HP Corse as well. Liked the video. Watched all your later video’s after this one to find the Corse with Kriega luggage combined but they were all with the original pipe ;-) had no other option than asking
@@filipledoux3565 Well thanks for watching 🤣 Join the discord from "about" page if you want to see some close up pics on how I mount it.
Great video and awesome pipe. Quick question; did you have to move your “blinkers/turn signals/“ in order to fit the tip of the exhaust?
Yes I did. You can see the tailtidy setup in the video.
@@PatchedBandit thanks! Do a follow up video if possible
If I swap the headers at some point then probably will do a short update. I have some Tenere content coming up soon.
@@PatchedBandit sounds good! I ordered the exhaust already. I’ll be doing a ride late in the spring to Baja
What’s your review of the Anakee Wilds?
1. Good everywhere not great anywhere. Excellent 50/50 pick.
2. Rear last 6 000 km front 12 000
3. Rear is loud like many knobbies
4. Surprisingly good asphalt traction even though you can get the rear to slip if you try hard enough
5. Good confidence doing offroad even some muddy and rocky tracks. Very good pull on rocky uphills ESPECIALLY compared to some stock tires like pirelli str rally that constantly jumps all over and gives no traction on steep rocky uphills.
Definitely recommended tire even though they don't last as long as some others. Some tires last longer but are also more slippery on hard surfaces because of that.
Hello. What deflector are you using on your windscreen please?
BW3F83M00000 Yamaha, Add On Screen
hallo man!! kostas here from Kavala!!
what brand tail tidy you put there to fit corect with hp exhaust???
did have this tail tidy at the store??? cheers!!!
Tail tidy set with the blinkers also came from HPCorse Italy. You can ask the motoholics team for the details referreing to this video. They will know the exact products used and will probably sell them to you if postage is not a problem.
motoholics.gr/contactus
I am not affiliated or sponsored by either :)
The tail tidy and blinker set has worked great. Any small led blinkers will do though.
@@PatchedBandit thanks man ! Happy new year !!
How does the heat of the exhaust work with the kriega OS 18?
Only thing is that I need to strap the pipe side lower strap a bit differently to the passenger footpeg. It's doable but it's not ideal. Doesn't bother me though and works great.
One thing that would fix the little annoyance is the kriega t7 passenger footpeg eliminators. I already bought them but never installed (yet). Maybe in the summertime when I try to make the T7 as light as I reasonably can I will take the footpegs off and install them instead.
My side bags are 12 liter.
will this not be trouble for soft luggage on the back ? (heating/burning)
No problem with these 12 liter kriega bags and don’t see how it could be an issue with any other bag type either. The pipe is pretty deep under the side plastics and did not heat my bags while riding.
Rode thousands of km with this setup already.
Only notable thing is that connecting the kriega OS setup in the passenger footpeg on the pipes side needs to be done a bit differently from the instructed position. The strap can easily melt against the pipe if routed the ’normal’ way.
This is not a big problem and I just mounted the strap from a slightly different position. Also kriega footpeg eliminator set apparently remedies this issue too.
Olipa hyvä video tuotteesta! Olin juurikin kyseistä putkea tilailemassa omaan T7:aan.
Miten putki istuu Kriegan pussukoiden kanssa? Ottaako kiinni laukun pohjaan? Kuumenevatko eväät?😅
Huomasin että sinulla oli samat laukut kun itselläni.
Mukavaa kevään odotusta!🫡
Ainakaan noi 12 litran kriegat ei ota putkesta lämpöä niin että olisin huomannut. Putken puolelta kiinnityksen joutuu vetään vähä eritavalla, ettei remmi tule liian lähelle. Kriegan footpeg killerit ratkaisee tuonkin ongelman, mutta ilmankin on pärjännyt.
Mulla on noi peg eliminatorit laatikossa, mutta en oo koskaan laittanu paikalleen.
Sitä samaa! :) Lähden uudelle rundille taas 3 viikon sisällä, mutta tälläerää mukaan lähtee CRF300L
@@PatchedBandit Kiitos tiedosta! Täytyykin tsekata nuo footpeg killerit👍🏻
Mukavaa ja turvallista reissua! Aijon stalkata meininkejäsi. Kanava tilattu☝🏻😙
good video, bro, what is the tail tidy? brand I mean! thanks
It came from HPCorse too but I'm not sure who makes it. All the info I know is in the video description. Guys at Motoholics will probably have more info if you need it :)
@@PatchedBandit i am in Luxembourg. Wann get rid of africa twin which burn oil
@@michsky46 Damn.. Never heard of an africatwin doing that 🤔 How old is it?
@@PatchedBandit new, they do brother and a lot of ppl has this problem
@@PatchedBandit now 23k km
Is it true that when you remove the DB killer the spark arrester is removed as well?
I don’t think the db killer works as a spark arrester and the pipe doesn’t have one stock.
If you ride a lot areas with high risk of forest fires you could install a separate arrester for example from Camel ADV shown in this video: ruclips.net/video/PHNYZ8h3vJA/видео.html
I’m not a specialist in this matter but would the sparks even go past the CAT in the header pipe? Just thinking if it’s a risk if the bike still has the oem headers…
@@PatchedBandit thank you for your reply back. I plan on putting headers on right away to get rid of that ugly CAT. Looks like I will get the Camel ADV spark arrester. Safe riding!
hello, have the same exhaust, how did you get out the db killer? to me it looks like its not removable
You can drill it out and put in a small bolt and nut. Very easy to do 👍
I show it in the timestamp 9:14
@@PatchedBandit thanks for quick responce ;)
That's a lot better pipe ,it's out of the way. 👍👍
Still awesome. 10 000km after ✌️
Is the mid pipe titanium or stainless steel?
I'm 99% sure the midpipe is stainless steel and only the end can is titanium. This is translated with google translate from the HP Corse italian product catalogue:
"High port slip-on fitting in stainless steel"
I read this as the "high port" meaning the high option as they sell the low midpipe versions too.
✊✊✊
🫡😊
Can it be used with the oem tail ?
Yes but you need to move the blinkers
@@PatchedBandit thanks m8
I sub'd. I prefer white chip macadamia nut cookies.
They are on backorder but I will see what I can do 😎
@@PatchedBandit thanks!
with bend radius like that the power will be down and if you run a d-cat you 100% definitely need a ECU flash
Doubt the power is negatively affected but for sure decatting should be done with ecu tune.
Mine has the cat in place still though.
The oem pipe design is so stupid for an offroad bike that it needed to go.
Mandrel bends don’t affect power lmao
Mandrel bends don’t affect power lmao
@@DWBmotorsports yes they do what are you a miss-informed flow dynamics expert? wow do you believe what you type ? 🤣😅
@@simonmallia2051 mandrel bends are the MOST efficient bend. What do you recommend instead 😂
Moikka minkä tailtidyn ostit ja mistä tohon T 7 aan?
Se tuli minusta hp corselta sekin, mutta motoholics athens sen myi ja asensi. Valitettavasti tarkempaa kun kuvauksessa oleva tieto ei ole mullakaan tästä.
Wchat tyre is this ?
Michelin Anakee Wild
@@PatchedBandit thanks
Its nice but I think Dakar exhaust for Tenere 700 are better
Anything that attaches to the oem rear bracket is worse by functional design. Appearance is for anyone to judge themselves of course
Good stuff! One thing, you drive a car, and RIDE a bike/motorcycle/a horse.
Oh you are gonna have a field day if you watch more of my videos 😂 I barely speak english 🤪
@@PatchedBandit no worries, we all learn.
Most expensive for sure
Probably not wrong about that. Still going strong today and it sounds amazing 🙂