Audi EPC Light: How to Fix and Reset

Поделиться
HTML-код
  • Опубликовано: 8 фев 2025
  • Audi EPC Light: How to Fix and Reset. In this video you will learn the most common causes of the Electronic Power Control (EPC) light coming on your Audi.
    Having trouble with your Audi shaking and the EPC warning light turning on? This common issue can happen without warning and leaves you stranded with a violently shaking car. In this video, certified Audi mechanic Brian from Honest Mechanic diagnoses what triggers the EPC system and limp mode to engage.
    Learn what Electronic Power Control (EPC) means and how throttle communication faults cause your check engine light, misfires, and reduced engine power. We cover the leading culprits like failed camshaft sensors, bad coil packs, dirty throttle body and air flow sensors, carbon build up, worn spark plugs, injector issues, and more.
    Read Guide here: thehonestmecha...
    Get straight forward DIY troubleshooting tips to determine root causes through on-board computer scans, diagnostics software data, and multimeter component testing procedures. Find out expected repair costs and best practices to get your vehicle driving smooth again while avoiding getting ripped off at the dealership. This detailed and easy to follow video provides insider clarity into why Audis shake when the EPC dash warning illuminates.
    Whether you have an Audi A1, A3, A3,A4,A5, A6, A7 or Q5, Q7 the EPC light causes are the same.
    KeyVideoTerms:
    audi epc light, audi shaking, audi epc limp mode, vw epc warning, volkswagen electronic power control, audi throttle body, audi throttle position sensor, audi camshaft position sensor, audi accelerator pedal module, audi spark plugs, audi ignition coil
    If you find this video helpful, please subscribe and share.
    Disclaimer: This content is for educational purposes and should not replace professional advice. As an experienced mechanic, I aim to provide helpful insights, but I'm not liable for any damage or issues arising from the application of this information. Always consult a qualified mechanic for specific vehicle needs. Viewer discretion and responsibility are advised.

Комментарии • 96

  • @Vlogbobb
    @Vlogbobb 4 месяца назад +5

    Useful video. 2015 b8.5 s5, 115k km. Epc light came on, and the car started shaking with a loss of power. Parked, turned on/off fixed the issue. I think it's time for a basic tune-up(spark plugs ect) it could be carbon build-up also.

    • @simonb5401
      @simonb5401 3 месяца назад +1

      Wow Same thing happened to me 7 days ago with my 2015 Audi q5! I wish i came across this video sooner. I got mine towed to the Audi dealer and now they are talking about a rotor wiring issue

    • @Vlogbobb
      @Vlogbobb 3 месяца назад +1

      @@simonb5401 what ended up happening? Got it fixed? Did it fixed the issue?
      I'm still driving with no problems since that day.

    • @simonb5401
      @simonb5401 3 месяца назад +1

      @Vlogbobb hey, as it turned out the dealer said a rodent, most likely a rat/mice chewed a wire connector. And my fuel ump module was bad. Its running now, but soon i will try and get a tune up done

  • @levchoccy
    @levchoccy Месяц назад +2

    So i diagnosed mine at home, found that the ecu got blocked from the dusty winds and leaves. The rain then found its way into the the ecu box and had to dry it. It now drives well, no epc light or shaking

  • @jerichotm2122
    @jerichotm2122 9 месяцев назад +4

    Now its crystal clear! Thank you!

  • @CM-ec5wc
    @CM-ec5wc День назад

    Please help
    Getting EPC light after 3000 rpm when accelerating and goes into limp mode only engine code says misfire at cylinder one and cylinder four swapped coils and spark plugs still does it

  • @airjoshy
    @airjoshy 10 месяцев назад +1

    Very helpful thanks 🙏🏾

  • @owenfrancis6324
    @owenfrancis6324 5 дней назад

    Question
    I have a 2011 Audi A3 1.2 TFSI and the EPC light comes on and occasionally, the EML comes on with it.
    I have a code of P022200 and P012200 come up on my DTC scanner. What do you recommend?

  • @dylandalka8700
    @dylandalka8700 11 месяцев назад +3

    I have an Audi s4 b8.5 and was driving home around 75mph. I went to pass a car and didn’t punch it but when my car downshifted is when it threw the code and started to shake. I turned it off and back on and I took it easy home. Any idea on this?

    • @HonestMechanicChannel
      @HonestMechanicChannel  11 месяцев назад

      Hi, honestly, it's difficult to determine, but since the code disappeared after turning it off and back on, it might indicate something is starting to fail but hasn't completely gone bad yet, such as the spark plugs. The best approach would be to scan and check the code your S4 stored.

    • @dylandalka8700
      @dylandalka8700 11 месяцев назад

      @@HonestMechanicChannel So it showed a misfire in cylinder 1 and 3 I just changed the plugs and coils for those and haven’t got anything yet. I think I’m going to change PCV soon.

    • @tenierloma
      @tenierloma 10 месяцев назад

      Hello, my Audi Q5 2012 has this problem, the spark plugs and coils were changed and they scanned it and it doesn't show any faults, it vibrates sometimes other times it works well and it doesn't start well, it's time to accelerate

    • @CM-ec5wc
      @CM-ec5wc День назад

      @@HonestMechanicChannelsame issue here but I get code p0301 and goes on limp mode after 3000 rpm if you drive like grandpa will not fail at all

  • @johncanas2245
    @johncanas2245 3 месяца назад +1

    Hello love your videos , audi a2 owner and my ESP light comes out after some period of driving,I feel no difference at all , no power loss or such. If i switch off and on the engine it goes away,and rarely comes back happens at least once a day.
    What could be the fault? Thanks

    • @NateHoffman-225
      @NateHoffman-225 3 месяца назад

      I have the same thing in my Audi a6, no clue what it is

  • @EricaGonzalez-t5k
    @EricaGonzalez-t5k Год назад +6

    Hello, I have an Audi 6 2017. EPC goes and comes, I have taken it to two mechanics no codes are shown. Aside from the tips provided, any suggestions on what it can be?

    • @HonestMechanicChannel
      @HonestMechanicChannel  Год назад +2

      Hello there, is the light comes and goes on startup or while driving? are there other symptoms alongside the light?

    • @EricaGonzalez-t5k
      @EricaGonzalez-t5k Год назад

      Hello, sometimes it comes on when I turn on the car, sometimes while I’m driving. Only when the EPC light is on, it will display Stop-start function non available.

    • @bryangomez6740
      @bryangomez6740 Год назад +2

      I had the same thing at first check engine with cylinder miss fire and EPC light I changed fuel injectors and carbon cleaning for the check engine. For EPC I replaced a damaged cable that went to the gas pressure fuel. After that the car felt better but still had EPC going on in the high way. I had done an oil change at home and guessing by lifting the car up it activated the EPC so I did a EPC reset I seen on a website. After that no EPC light hope this helps!

    • @EricaGonzalez-t5k
      @EricaGonzalez-t5k Год назад +1

      ⁠It comes on when the car comes on and sometimes if it didn’t while the car is on. No other codes come on or any other signs of car destress

    • @G23sports
      @G23sports 11 месяцев назад +1

      I have a 2015 A3. EPC has been coming on and off for about 350 miles. Same with check engine. I had codes read and got multiple. P0236 (said moderate issue). P0606, P0106, P0192 (said these were major issues). Any idea? Thanks!

  • @jdc8340
    @jdc8340 20 дней назад +1

    I have a 2007 Audi a6 3.2l it was running fine and I parked it and went to start it again later and it won’t start. It shake bad when turning over trying to start and epc light comes on. Has oil in ignition coils and spark plugs. Has new high pressure fuel pump and new battery. It was running great no check engine lights

    • @Gburke247
      @Gburke247 15 дней назад

      I have the same problem with Audi a1 parked up car was fine the next day won’t start has the epc light on and engine light it’s also shaking, let me know what’s wrong with yours please 😢

    • @jdc8340
      @jdc8340 11 дней назад

      @ I still don’t know

  • @muzie1489
    @muzie1489 Месяц назад

    I Scanned my audi it showed camshaft sensor position fault. I changed it but the problem is not going away. I'm still experiencing EPC light once my engine has warmed up.

  • @antliftz1831
    @antliftz1831 11 дней назад

    My epc light only comes on if I go up to a certain speed too fast and it doesn’t shake just the light comes on and it turns off after being turned off and back on again ( I have a 2016 Q5)

  • @JD-ue5jh
    @JD-ue5jh 3 месяца назад

    HOW about when its cold out and i start my car, EPC light comes on but after driving a bit and waiting for the engine to warm up. I turn it off and then turn it on and EPC light is no longer there! what could it be?

  • @9993bhavish
    @9993bhavish 10 месяцев назад

    Can bad fuel quality raise epc warning? Im having same with my a5 2012 engine oil consumed very fast

    • @HonestMechanicChannel
      @HonestMechanicChannel  10 месяцев назад

      Yes, bad fuel quality can indeed trigger an Electronic Power Control (EPC) warning light on your dashboard because poor fuel can affect the engine's performance and emissions. However, fast oil consumption is typically unrelated to fuel quality and may indicate other issues such as leaks (internal or external), worn piston rings, valve seals, or a problem with the turbocharger. Do you have an OBD scanner?

    • @9993bhavish
      @9993bhavish 10 месяцев назад

      Been 2 month since i bought my a5 from a friend engine oil was topped up after 2 months ive been unlucky as there was a mixture of diesel in my fuel tank and when i went to a garage he said only 500ml of oil remained in the engine. Could this oil consumption have happened due to the diesel mixed with petrol

    • @9993bhavish
      @9993bhavish 9 месяцев назад

      @@HonestMechanicChannel is their a specific code that the obd scanner shows for the worn out piston rings?

    • @9993bhavish
      @9993bhavish 9 месяцев назад

      @@HonestMechanicChannel you think i should use a thicker engine oil since my audi is above 115,000 km

  • @dylandegnan4497
    @dylandegnan4497 6 месяцев назад +1

    My engine light came on and I have obd2 carista and codes are 21388 fault code - Exhaust door valve 1: Open circuit I’ve taken off the wire at the exhaust on both sides then the 2nd came up blown in them to clean desert and 1 open circuit driver side is still faulty not letting me reset EPC came on car was shaking and loud and kept driving engine light came on saying misfire as I kept driving for 5 mins only when in sports mode snd stopping the gas hard

  • @moisesmaldonado5942
    @moisesmaldonado5942 18 дней назад

    Mines has the epc light on , and is a misfire on cyl.4 change the plugs and coil won’t go away…..

  • @salvatorej.quaglieri7792
    @salvatorej.quaglieri7792 9 месяцев назад +2

    With mine if I hard accelerate the EPC light comes on and it shakes bad and misfires, the code I get is for cylinder 2 misfire.. however I can shut the car of and drive fine and the engine doesn’t shake.. it only does this when I put the pedal to the floor. I also replaced that cylinder plug and coil pack and still have the same issue.

    • @HonestMechanicChannel
      @HonestMechanicChannel  9 месяцев назад +2

      Hi, The symptoms you describe suggest there could be an issue beyond just a faulty spark plug or coil pack in cylinder 2. Since replacing these didn't resolve the problem, you might be dealing with fuel delivery issues, a clogged fuel injector, or a more complex electrical or sensor-related problem. Given that the issue occurs under hard acceleration, it could also be related to inadequate fuel pressure or air intake issues. My bet is on a bad fuel injector on that cylinder

    • @salvatorej.quaglieri7792
      @salvatorej.quaglieri7792 9 месяцев назад

      @@HonestMechanicChannel ok thank you, I believe it to be a fuel injector as well. It has 112,000 miles.

    • @konstantin-big
      @konstantin-big 8 месяцев назад +2

      Hello
      You can take out the fuel injector from cylinder nr-2 and place that to another cylinder
      If the error code is on that cylinder then the problem is the fuel injector

    • @josuecruz5327
      @josuecruz5327 4 месяца назад

      you ever figure out what it was?

    • @salvatorej.quaglieri7792
      @salvatorej.quaglieri7792 4 месяца назад

      @@josuecruz5327 I haven’t change it out yet but I believe it’s a clogged injector, I have about 116,000 miles on it. I’ll definitely post an update when I fix it.

  • @Piligrim_ODESSA
    @Piligrim_ODESSA 10 месяцев назад

    Hello,
    I have codes p2293, p0343, EPC indication. I checked the camshaft marks, everything is fine. accelerates poorly at low engine speeds, after 2500prm, as if a second wind appears and the car begins to accelerate. Thanks

    • @HonestMechanicChannel
      @HonestMechanicChannel  10 месяцев назад +1

      Hi Piligrim, managed sort it out? these codes can also be caused by the following
      1. VVT Solenoid
      2. Faulty fuel pressure regulator
      3. Clogged fuel filter
      4. Malfunctioning camshaft position sensor
      5. Wiring issues related to the camshaft position sensor

    • @Piligrim_ODESSA
      @Piligrim_ODESSA 10 месяцев назад

      Thanks a lot. I changed the fuel filter, changed the camshaft sensor, tried the working car, checked the wires, supplied 12 volts to the solenoid, it reacts. ordered another high pressure pump

    • @Piligrim_ODESSA
      @Piligrim_ODESSA 10 месяцев назад

      ​@@HonestMechanicChannel Thanks a lot. I changed the fuel filter, changed the camshaft sensor, tried the working car, checked the wires, supplied 12 volts to the solenoid, it reacts. ordered another high pressure pump

    • @Piligrim_ODESSA
      @Piligrim_ODESSA 10 месяцев назад

      @@HonestMechanicChannel I’m also thinking of checking the oil channels of the phase regulator control and the phase shifter

    • @Piligrim_ODESSA
      @Piligrim_ODESSA 9 месяцев назад

      I solved the problem. there was a problem with installing the chain between the camshafts, one tooth

  • @JoseLopez-hc5kk
    @JoseLopez-hc5kk 4 месяца назад

    My Audi a5 struggles to turn on and epc light comes on but when it turns on fast it doesn’t come off what can it be

  • @B-sp6iv
    @B-sp6iv Месяц назад

    Ok so I have a 2008 A6 3.2 Quattro I bought it off a dealer ship and only was driving it for two days then my EPC light came on it started shaking lost of power went into limp mode and the code is (Throttle valve drive Electrical error in circuit - Open circuit/short circuit to ground) I been having the car parked ever since that happened idk how to fix it I changed the throttle body that ain’t work idk honestly and it was smoking on the driver side on the engine

  • @adrienzeqaj01
    @adrienzeqaj01 5 месяцев назад

    I have an audi a6 2.7t 2004 and when you push the throttle it loses power and the epc shows up, you have tu turn off the car to be able to walk

  • @percyjenkinsjr7741
    @percyjenkinsjr7741 6 месяцев назад

    I have an 2013 adui q7 and i changed the throttle body and i was still having the same problem. My q7 is supercharged so could it be that? I noticed a small throttle body in the supercharger but i haven't tested it yet

    • @HonestMechanicChannel
      @HonestMechanicChannel  6 месяцев назад

      Hi Percy, can you provide more info please so I can give the best answer possible. are you getting any codes? what does your car do?

    • @officialdomigod394
      @officialdomigod394 2 месяца назад

      The throttle body need to be relearned to the car after installation. Otherwise it won’t communicate properly

  • @raminm.1926
    @raminm.1926 6 месяцев назад

    Hi, Audi A4 2013 about 75000 miles, when the car is still cold it is no problem and the EPC light is off. If I drive for almost half an hour, stop and turn off the engine, if I turn it on back again usually the EPC light comes on and stays on. But there is no shaking or loss of power or anything noticeable in driving. Any advice what may the cause be?

    • @HonestMechanicChannel
      @HonestMechanicChannel  6 месяцев назад +1

      Hi, Since this happens after a while, Since it only appears after driving for a while and restarting, it might be related to a sensor or electronic component that malfunctions when hot. Common causes include:
      Throttle Body Issues: Dirt or malfunction in the throttle body.
      Faulty Sensors: Issues with the mass airflow sensor (MAF) or crankshaft position sensor.
      Let me know how it goes!

    • @raminm.1926
      @raminm.1926 6 месяцев назад

      @@HonestMechanicChannel Thank you for your response. a basic OBD check shows engine fault 18062 Coolant Pump B control circuit/Open. Is that related?

  • @ToXyCoLoR
    @ToXyCoLoR 9 месяцев назад

    Petrol, 2.0 tfsi 211hp. EPC doesn apear every time when i put ignition. It s need to try beteeen 5 and 20-30 time to EPC apear . I noticed that after a longer trip, the EPC no longer appears when I try to restart. and gives me error TPMS, ESP, ABS, gear box and headlight adjustment. I have an error on almost all modules when I scan with VCDS. I'm interested if you experienced something like this, where the problem came from. when the car is started, it runs flawlessly, it doesn't jerk, it doesn't slow me down at speed.

  • @muhammadtalhasiddiqui6914
    @muhammadtalhasiddiqui6914 6 месяцев назад

    Hi all, when i switch on the car, along with a few lights on dash, the epc light comes on but when the car ignition starts, the epc light goes off. Is this normal or means a problem with epc?

    • @HonestMechanicChannel
      @HonestMechanicChannel  6 месяцев назад

      Hi, that is absolutely normal most (if not all) Audi's do that.

  • @iglaveli7230
    @iglaveli7230 9 месяцев назад

    Hey the epc comes on , on my C7 A6. It comes on sometimes when I turn the car on but not every time. Would could it be ? I do feel a slight decrease in power when it is on.

    • @Alberto-qf7zh
      @Alberto-qf7zh 7 месяцев назад

      I'm having the exact same issue as you described, mine is a 2014 Audi A4. Took it to a mechanic who said it was the oxygen sensor (also called lambda sensor). Changed the one who was "supposed" to be faulty, only for the light to come ON again about 2 days later. Changed the other sensor (they're 2 lambda sensors), and again, about 2 days later the EPC light came ON again. I'm getting frustrated with this. I'm going to return to them tomorrow and see what they come up with. I'll let you know if I manage to have it sorted out and what they did to sort it out. I haven't taken to my local Audi dealership because they are ridiculously expensive.
      I once was quoted R32000 (South african Rand) = USD1700, for rear brake calipers, that actually cost R7000 = USD380.

    • @roned1nero579
      @roned1nero579 6 месяцев назад

      @@Alberto-qf7zh Did you get it fix and figure out what it was?

    • @Alberto-qf7zh
      @Alberto-qf7zh 6 месяцев назад

      @@roned1nero579 Still no luck. I guess I'll have to save up and take it to Audi themselves 😒

  • @ecullyy
    @ecullyy 5 месяцев назад

    Thank you

  • @mbachimwale
    @mbachimwale 9 месяцев назад

    Hello i have an a3 2011 s line epc comes on when I accelerate hard but goes off when normal.....what could be the issue?

    • @HonestMechanicChannel
      @HonestMechanicChannel  9 месяцев назад

      Hi Mbach, how are your spark plugs?

    • @mbachimwale
      @mbachimwale 9 месяцев назад

      @@HonestMechanicChannel I haven't changed them yet

  • @lifeisfunsosmile
    @lifeisfunsosmile 5 месяцев назад

    Mine came on today when driving in the rain. It went into limp mode on the motorway. I turned the car off and back on again and the car drove ok with no lights on and i continued the remaining 43 miles of driving. How can I diagnose this please with no engine light or epc light on the dash now?

    • @josephrypinski3335
      @josephrypinski3335 4 месяца назад +1

      this exact thing just happened to me. turned the car back on and hopefully i can make it back for the last hour of driving

  • @laothakao
    @laothakao 2 месяца назад +5

    Change the battery

    • @Malik-ql2ux
      @Malik-ql2ux Месяц назад

      I also did that and it worked well 👍🏻

    • @daniro2k
      @daniro2k 26 дней назад +1

      I have a misfire code I changed the spark plugs & coils and car still shakes and black check engine and epc light -
      But here’s the kicker none of this was happening until after I changed my alternator - I had a bad alternator car stopped running and turning on then I got alternator fixed car start working and starting then a few days later car start shaking and blanking check engine lights and epc light
      Code is misfire code
      Do you think it’s the battery?
      2017 Audi Q5

    • @noahpedroza2201
      @noahpedroza2201 23 дня назад

      @@daniro2kdid you try the new battery yet, I’m experiencing the same thing

    • @5thoftheyr
      @5thoftheyr 21 день назад

      I recently gave some friend a jump who had a bad battery in their car, an extended jump at that, after that episode of a cheap tow due to her failing her car parts, my 06 audi q starter acting delayed and the epc code came on, never seen this light before the whole extended car jump alternator bypass situation, thanks.

    • @CM-ec5wc
      @CM-ec5wc День назад

      Hey it was giving you engine code p0301?

  • @ULXB258
    @ULXB258 5 месяцев назад

    I have this light but no shaking... (RS5 8T)

  • @2s38enjoyer
    @2s38enjoyer 9 месяцев назад

    Hello, I recently had a fuel line come off on my car (weird issue) and after reconnecting the line, the epc light is on. Could this turn on simply from air getting into the fuel line/the car failing to start a couple times?

  • @NoelG-c7s
    @NoelG-c7s 5 месяцев назад

    Cleaned my Audi s4 engine bay and epc light came on and went in to limp mode🤦🏽‍♂️

    • @HonestMechanicChannel
      @HonestMechanicChannel  5 месяцев назад +1

      Hi Noel, sorry to hear that, here is what I think: it's likely that water or moisture got into sensitive electrical components, such as sensors or wiring.
      Check for wet or loose connections, especially around the throttle body, MAF sensor, and coil packs. Dry any wet areas. If you have an OBD scanner the best place to start is to clear the codes.

    • @NoelG-c7s
      @NoelG-c7s 5 месяцев назад

      @@HonestMechanicChannel thanks for the help, I did notice that if I let the car idle the epc light won’t come on but if I tap the gas pedal a couple times it comes on as well as both my cooling fans stoped working

  • @RICHIE_RICH89
    @RICHIE_RICH89 5 месяцев назад

    So basically you mentioned all issues that can cause any host of many issues😅