I love this!!!! Would this work if you did the prints separately and layered them to ensure they aligned? Adhered the white layer to the shirt then the colored layer? Just curious. Wouldn't be cost effective but curious.
Hi, have a look here: ruclips.net/video/6xz60S52BS0/видео.htmlsi=JcQbCqmQgLpzRuqZ isn't that roughly what you mean? with some printers that already work with rip software, printing with white and CMYK works in one print pass anyway, like with the Ghost Pro X Essential for example.
@Ghost-White-Toner well I just download the little ghost rip demo the matching of the color and white but I think I figured it out but a lot of sheets so I will get back and thank you very much for out luv your products
Hello, I am new to this have no experience with laser printers, I just came across this video and as I am in the research of buying a color laser to print on T-shirts and stickers, decals , What printer are you using? can I use any 4 color laser? or I need a special printer? Can you use also Xerox C 8000? And to swap the black toner for white? Thanks much
Hi, we use and sell the printers you see in our videos. With the Xerox C8000 you cannot exchange the black toner for the white toner. With the Ghost Pro (Xerox C8000W) you have the white toner installed by default because the printer mixes black from the CMY colors. However, we only sell the Ghost Pro for stationery and decal printing as this printer is not suitable for transfer printing such as textiles due to the toner arrangement. For textiles, for example, you can work with the Little Ghost, Big Ghost, Ghost Pro X Essential and Ghost Pro X.
hello, very good video ! I have two questions : - how to be sure the second pass will be in the same position ? I have often the white print which exced - laser dark paper B is very betty in PRO version ? How many washing it supports ? thanks a lot
Hi, you can never be 100% sure but you can reduce the white underprint by 2-3 pixels if the design allows it and is not too delicate. Here it also depends on the fabric used - if it is a very cheap t-shirt of poor quality you will notice faster that it no longer looks as nice as it should look. if you use a decent t-shirt of good quality you will enjoy the print for a long time. We say on average you can wash it inside out and at 30 degrees up to 40 - 50 times.
Hi, there is also a solution to this. Take a look at this video to see how you can adjust the white print so that the offset is no longer so strong or no longer visible: ruclips.net/video/Emt4fasvjRo/видео.html The offset is normal with laser printers.
I love this!!!! Would this work if you did the prints separately and layered them to ensure they aligned? Adhered the white layer to the shirt then the colored layer? Just curious. Wouldn't be cost effective but curious.
Hi, have a look here: ruclips.net/video/6xz60S52BS0/видео.htmlsi=JcQbCqmQgLpzRuqZ isn't that roughly what you mean?
with some printers that already work with rip software, printing with white and CMYK works in one print pass anyway, like with the Ghost Pro X Essential for example.
Thank you I'm having so many problems with printing
Hi, what problems are you having with printing?
@Ghost-White-Toner well I just download the little ghost rip demo the matching of the color and white but I think I figured it out but a lot of sheets so I will get back and thank you very much for out luv your products
Hello, I am new to this have no experience with laser printers,
I just came across this video and as I am in the research of buying a color laser to print on T-shirts and stickers, decals ,
What printer are you using? can I use any 4 color laser? or I need a special printer?
Can you use also Xerox C 8000? And to swap the black toner for white?
Thanks much
Hi, we use and sell the printers you see in our videos.
With the Xerox C8000 you cannot exchange the black toner for the white toner. With the Ghost Pro (Xerox C8000W) you have the white toner installed by default because the printer mixes black from the CMY colors. However, we only sell the Ghost Pro for stationery and decal printing as this printer is not suitable for transfer printing such as textiles due to the toner arrangement.
For textiles, for example, you can work with the Little Ghost, Big Ghost, Ghost Pro X Essential and Ghost Pro X.
hello, very good video ! I have two questions :
- how to be sure the second pass will be in the same position ? I have often the white print which exced
- laser dark paper B is very betty in PRO version ? How many washing it supports ?
thanks a lot
Hi, you can never be 100% sure but you can reduce the white underprint by 2-3 pixels if the design allows it and is not too delicate.
Here it also depends on the fabric used - if it is a very cheap t-shirt of poor quality you will notice faster that it no longer looks as nice as it should look. if you use a decent t-shirt of good quality you will enjoy the print for a long time. We say on average you can wash it inside out and at 30 degrees up to 40 - 50 times.
Can we see a wash test with the new B paper?
We'll add this to our RUclips ideas list.
Very helpful video but I am struggling with the second pass..it is way off no matter what I do.
Hi, there is also a solution to this.
Take a look at this video to see how you can adjust the white print so that the offset is no longer so strong or no longer visible: ruclips.net/video/Emt4fasvjRo/видео.html
The offset is normal with laser printers.