You earned a new subscriber today. Great short walk through with a real world home application. I had already purchased this sprayer to paint my shed/chicken coop. I wanted something exactly like this for the tips and tricks - paint viscosity dilution, pro-active cleanup tips including the water buckets, and honest feedback overall. Great video. Thank you!
When I first tried out this sprayer I had disastrous results. The paint sprayed out like crazy with hardly any control. After leaving off of the trigger the paint would continue to run out of the nozzle. Turned out that the black ring was inserted reversed from the factory. I never removed the ring before use so I had no way of knowing this as it still fit into position as you would think it should. After the mess I had I was too disgusted to continue figuring on returning the sprayer. I discovered the problem after I cleaned the gun up and just spraying water through it I could tell a big difference. This video says the ring will only fit one way which is true as long as it's facing the correct direction. One thing I noticed after I corrected the ring is that there were no threads left showing on the nozzle cap when tightened, as before there was. I watched this video after my problem and did find it very helpful. Just thought I'd share my story as a warning
You should always load the sprayer with water first (assuming you are using water based paint and/or stain) to make sure the gun is operating correctly.
Dude! Thank you for this video. I hate reading directions!! It’s confusing and boring as heck!! You showed me everything I need to know!! I appreciate it!
THANKYOU for you detailed video. You even showed all the little parts that need to be cleaned afterwards. Very helpful for this first time spray painter! The sprayer was easy and awesome
Just got it have not opened box I painted Professionally 20 years ago used nice sprayers looking forward to painting kitchen cabinets. I loved demonstration with son involved very well done like regular folks THANKS 5/25/23
EXCELLENT Vid. Using these instructions to do 2 Stucco out door walls 20x8 on a non windy day. Buying same supplies and following Your cleaning instructions. Using the Same Avanti Sprayer just bought at Harbor Freight for $39 with coupon. I owe You and will follow for pay back.. BTW, awesome shop
Great information! I just purchased this sprayer to stain my porch and deck. Hopefully this sprayer is sufficient for the job. Those sprayers can get pricey! Thanks again!
Amazing video! Bought this gun thinking it wouldn’t be the least amount great but I was blown away after my first use. Decided to see what others think and came here for a review on the sprayer.. leaving as a fan. Love the fathering happening here.
You got a new subscriber! Entertaining and informative! Good job 👍😎I just bought one and was looking for some more information about it and you did a great job on it!
Thank you for the great review and instructional video. I just purchased the AV-100 yesterday and did not know what to expect (as I always use paint rollers and brushes), but was hoping for the best. Your video gave me encouragement for a nice spray paint job I am planning to do --- Thanks again. And I subscribed to your channel; keep up the great work!
@@mKierstenk paint consistency took some experimentation because it did not agree with the suggested recommendations and make sure you have enough mixed paint on hand. I did not have a positive first use experience with it, but I will give it another try on the fence. Good luck.
Thanks buddy. Just bought this gun and going to use it to finish my basement walls with the same color too! Great job and your son is quite the little helper. Hope you keep posting more videos and thanks so much!
Thank you so much for this video. I've had this sprayer for about 2 years and just broke it out. My back isn't allowing me to use rollers and brushes. I tried. It was horrible. 😩 This video explained everything. I'll use the sprayer as expensive as the paint quotes have been. I feel so much more confident now. Subscribed and liked! 💞
Just bought this sprayer yesterday, I have to paint a wellhouse that I built way out in the middle of a cow pasture for a friend. Planning on powering it with my old Harbor Freight Chicago Electric blue 2-Stroke generator (the predecessor to the "Tailgator" generator). I hate to paint, but I don't mind painting with a spray gun so much. Thanks for the video!!!
Thumbs up! Thanks for the thorough video. Just the type of full explanation from start to finish I was looking for. Picking one up tomorrow to paint some very decorative crown molding that would take forever with a brush. Have a happy thanksgiving
I got one of these for painting a large shed I built. It works very well with water based latex paint. Much better than the old buzzer gun airless sprayers. It was reasonably fast and controllable.
Great video and great tip on the bucket of water! I tried my sprayer for 1st time before I saw your video. I had problem with too much overspray and volume. Did you use the adjustment knob behind the trigger? Your video inspired me to try it again and try with water to see if I can adjust the amount of spray/volume. Thanks Keep up the good work!
Just bought this piece at the freight. Good video. Thanks. Looks easy. I like the viscosity cup. Mine drained out in 45sh seconds. As always, will practice on scrap first. Thanks man! 🙏
"You can make results, or you can make excuses." Awesome video! Great review / how-to / tips-and-tricks / overview of the sprayer! Looking forward to more! Subscribed! Love your delivery. I'm envious of the father-and-son duo!
Thank you, Sir. Too many people now-a-days are making excuses and are being critical because they are too afraid to fail. Make results, good or bad, just do something and learn from your mistakes. I'm just trying to teach the boy how to be a man, schools now-a-days don't teach a young man what he really needs to learn. We both thank you for the sub.
Thanks .. haven’t taken it out of the box yet after watching your video it’s going back to HF .. I didn’t want one that I have to mess around with thinning the paint first I wanted to pour it in the cup and paint the video was very helpful
great informative video, I had another brand of spray gun that I let someone use and haven't seen it since, I was thinking about getting this avanti gun but seen some bad reviews about it. from your video the gun seems to work just fine
Was going to get this one at harbor freight but don't want to be adding water to the paint extra work & being the paint will break down sooner so I will be settling for the Wagner 2500 model which don't have to add water bit more money but will be worth the money.
So, I didn't have everything I needed for the proper setup. Could have used a mixing bucket to get my ratio right, but had to mix in the sprayer container. Mixed it way to watery. Had lots of over spray and and because it was so watery, runs. I really didn't have time to figure it all out, so I just busted out the brush to clean up the runs and just continued to paint the rest with it. I'll take it home and play with it to get it right so I'm ready for the next time.
@@coachmattc We had done the same thing when we first got ours. That's why we put so much time into figuring out what it likes. The ratio seems to be the most important aspect of the whole exercise.
If its a metal body, it might not atomize the paint enough for good results. I am interested to see none the less. My best results have been wood, drywall, cabinets and such.
Recommendations for cleaning my Avanti Paint sprayer just like the one you have it has been setting in the box with dry paint in it for about a year now my helper never cleaned it. I’m disabled, and I hire him to do a job some good fast solutions, soapy water and a rag. Just don’t seem to do it. Thank you in advance.
I think you are mixing up vertical and horizontal. A little hard to tell, but it seems like your buddy is moving horizontally side to side, but the dial is ==. And I think when you are spraying up and down the dial is ||. The Owner's Manual says to do the opposite.
Thank you very much for stating your24 ounce paint to 16 ounce water dilution. That should make it much easier to use compared to the 10% water suggested on other sites. It could also help make this affordable sprayer last much longer too. Once again, Thanks
Do you happen to know the mix ratio for stain? I have behr waterproofing stain & sealer. Thanks for such a great and thorough video! Def ready to use it now! 😃
I do not. We have never tried any stains. What I would do is use the viscosity measuring tool on the stain by itself first, just to see how thiccc it is. Then I would start with a small amount of the thinning agent and measure each time until I got the correct viscosity. i.e. start with 5oz of stain and add 1oz of thinning agent, then measure. Add another ounce of thinning agent if needed and then measure. Then when you find the desired viscosity, now it is easy to bump up your measurements with your new found ratio.
I’ve been finding out most of the Turbine HVLP spray rigs work the same or very similiar the bigger differences i’ve found is Metal(aluminum) versus Plastic Construction i do personally prefer the Metal ones that are easier to Clean without damaging the surfaces i’m a retired ProfessionalWoodworker and in the past i’ve always used Compressed Air for Spraying although i’ve switched to the Turbine set ups for all my Paint and Finishing needs my unit is actually a older CampbellHausfeild Kit they don’t sell as a kit any longer one more thing almost all the Patents on Paint Sprayers and the Technology is now owned by the Wagner Corporation , who bought out many of the independent Companies over the years thanks for the video !
hmmmm My cap on the sprayer stuck to the container of paint after the first fill. Had to have my 28 year old nephew wrestle it open. . Possibly filled to much, could be water base paint dried too fast (maybe I was slow to paint), all the possibilities....not sure. By the end of the second empy - the cap would not come off. I did wipe the cap and container before starting again just to be sure I wouldn't have the same issue, but it was worse. My nephew could not get the cap off and my young mid thirties neighbor could not get the cap off the sprayer/container....LOL we are perplexed. Super sad as the results were great and I felt it was a simple sprayer to navigate.
You earned a new subscriber today. Great short walk through with a real world home application. I had already purchased this sprayer to paint my shed/chicken coop. I wanted something exactly like this for the tips and tricks - paint viscosity dilution, pro-active cleanup tips including the water buckets, and honest feedback overall. Great video. Thank you!
What's funny is how people just expect you to be a professional and not just a diy guy. Great video
Glad to see you teach your son all the hands on how to DIY
When I first tried out this sprayer I had disastrous results. The paint sprayed out like crazy with hardly any control. After leaving off of the trigger the paint would continue to run out of the nozzle. Turned out that the black ring was inserted reversed from the factory. I never removed the ring before use so I had no way of knowing this as it still fit into position as you would think it should. After the mess I had I was too disgusted to continue figuring on returning the sprayer. I discovered the problem after I cleaned the gun up and just spraying water through it I could tell a big difference.
This video says the ring will only fit one way which is true as long as it's facing the correct direction. One thing I noticed after I corrected the ring is that there were no threads left showing on the nozzle cap when tightened, as before there was.
I watched this video after my problem and did find it very helpful.
Just thought I'd share my story as a warning
You should always load the sprayer with water first (assuming you are using water based paint and/or stain) to make sure the gun is operating correctly.
Both great comments I appreciate you taking the time to make
Dude! Thank you for this video. I hate reading directions!! It’s confusing and boring as heck!! You showed me everything I need to know!! I appreciate it!
THANKYOU for you detailed video. You even showed all the little parts that need to be cleaned afterwards. Very helpful for this first time spray painter! The sprayer was easy and awesome
Just got it have not opened box I painted Professionally 20 years ago used nice sprayers looking forward to painting kitchen cabinets. I loved demonstration with son involved very well done like regular folks
THANKS
5/25/23
Good job. Plan on getting one. Thanks for video
Great video! I bought one several years ago to paint my exterior walls and now it’s time to use it. Thanks for sharing your tips and tricks!
EXCELLENT Vid. Using these instructions to do 2 Stucco out door walls 20x8 on a non windy day. Buying same supplies and following Your cleaning instructions. Using the Same Avanti Sprayer just bought at Harbor Freight for $39 with coupon. I owe You and will follow for pay back.. BTW, awesome shop
Trying to figure an easier way to paint my living room interior and this helped.
Great video! Probably one of the better instructional videos out there 👍 plus it makes me happy to see you teaching your son..
Thank you.
Helped a ton. I'll be grabbing this thing tomorrow and painting my new office.
Great information! I just purchased this sprayer to stain my porch and deck. Hopefully this sprayer is sufficient for the job. Those sprayers can get pricey! Thanks again!
How did units work for you on your deck? I’ve got fence and deck to stain with oil based stain
New sub from Austin Texas - keep inspiring 🎉🎉🎉
Amazing video! Bought this gun thinking it wouldn’t be the least amount great but I was blown away after my first use. Decided to see what others think and came here for a review on the sprayer.. leaving as a fan. Love the fathering happening here.
Ok I upheld the deal and subscribed.
Great video no fluff concise and to the point
Thanks for the detailed explanation.
Thank you for the extra $$ I was expecting to spend. Your video is great and I’m less confused over so many choices thank you again
About to put a stain/sealer on my fence. Appreciate the video, great tips!
You got a new subscriber! Entertaining and informative! Good job 👍😎I just bought one and was looking for some more information about it and you did a great job on it!
Thank you for being part of the best on RUclips..
There’s always a Sally Sue! 😆 thanks for the helpful video
Thanks for this video, helped me understand the mixing ratio better. My results have improved greatly!
very good video on how to.also made me chuckle
Your so funny love the attitude 😂 great review, your spot on especially thinning the paint for best results.
Thank you for details and ratios was awesome breakdown since first time I wasn’t using a roller
Thank you for sharing this amazing video, helps a lot!
I've been eyeing this sprayer & wanting it. This video was so helpful!! Thank you!!
Thanks! Very informative! I bought one of these sprayers and am looking forward to using it.
Thank you for the great review and instructional video. I just purchased the AV-100 yesterday and did not know what to expect (as I always use paint rollers and brushes), but was hoping for the best. Your video gave me encouragement for a nice spray paint job I am planning to do --- Thanks again. And I subscribed to your channel; keep up the great work!
I'm using it in a couple days. How did your project turn out? Was it as expected from this video?
@@mKierstenk paint consistency took some experimentation because it did not agree with the suggested recommendations and make sure you have enough mixed paint on hand. I did not have a positive first use experience with it, but I will give it another try on the fence. Good luck.
Thanks buddy. Just bought this gun and going to use it to finish my basement walls with the same color too! Great job and your son is quite the little helper. Hope you keep posting more videos and thanks so much!
Thank you so much for this video. I've had this sprayer for about 2 years and just broke it out.
My back isn't allowing me to use rollers and brushes. I tried. It was horrible. 😩 This video explained everything. I'll use the sprayer as expensive as the paint quotes have been. I feel so much more confident now. Subscribed and liked! 💞
Your son is a natural with that sprayer. His future wife is going to be super happy with his handy skills, and he'll have a beautiful home!
Just bought this sprayer yesterday, I have to paint a wellhouse that I built way out in the middle of a cow pasture for a friend. Planning on powering it with my old Harbor Freight Chicago Electric blue 2-Stroke generator (the predecessor to the "Tailgator" generator). I hate to paint, but I don't mind painting with a spray gun so much. Thanks for the video!!!
seems like a gamechanger for DIYers painting deeply textured surfaces at home that a roller can't get to
Thanks, Big Guy! I like it.
Great vido ijust bought my gun good to see you made it easy...
Thumbs up! Thanks for the thorough video. Just the type of full explanation from start to finish I was looking for. Picking one up tomorrow to paint some very decorative crown molding that would take forever with a brush. Have a happy thanksgiving
Thank you so much for sharing this information. I really enjoyed your video. It helped me. I plan to make results.
very good demo and information provided.
I subscribed. You absolutely deserve it. Detailed and professional review. Especially the viscosity cup part. I will be getting one of these
I got one of these for painting a large shed I built. It works very well with water based latex paint. Much better than the old buzzer gun airless sprayers. It was reasonably fast and controllable.
Great video! You and your son are a great help! Thank you!
Thanks,well explained from A to Z
i liked it, very helpful, new subscriber! looking forward to more father son projects!!!
Awesome brother thanks
Great video and great tip on the bucket of water! I tried my sprayer for 1st time before I saw your video. I had problem with too much overspray and volume. Did you use the adjustment knob behind the trigger? Your video inspired me to try it again and try with water to see if I can adjust the amount of spray/volume. Thanks Keep up the good work!
super helpful video thanks guys. off to start my paint project.
subscribed and liked ;)
Just bought this piece at the freight. Good video. Thanks. Looks easy. I like the viscosity cup. Mine drained out in 45sh seconds. As always, will practice on scrap first. Thanks man! 🙏
"You can make results, or you can make excuses." Awesome video!
Great review / how-to / tips-and-tricks / overview of the sprayer! Looking forward to more! Subscribed!
Love your delivery. I'm envious of the father-and-son duo!
Thank you, Sir. Too many people now-a-days are making excuses and are being critical because they are too afraid to fail. Make results, good or bad, just do something and learn from your mistakes. I'm just trying to teach the boy how to be a man, schools now-a-days don't teach a young man what he really needs to learn. We both thank you for the sub.
@@grenefeet Great detailed video...thank you!
Thanks .. haven’t taken it out of the box yet after watching your video it’s going back to HF .. I didn’t want one that I have to mess around with thinning the paint first I wanted to pour it in the cup and paint the video was very helpful
Thanks. Was curious about these
Thanks, very informative.😎
Thank you for your video. I will try this paint sprayer.🙂
Thank you, we needed this.
Man you are the best ever. Thank you. Tell your son I said hello and be good 😆
Great video! Thank you 🙌🏾
Heck yes!! Subscriber #43! Wait until there MILLIONS!! HI KID. Really need this to paint my kids room. Is this the tool? Many thanks! Hi again kid!
Thanks for the video very helpful
great informative video, I had another brand of spray gun that I let someone use and haven't seen it since, I was thinking about getting this avanti gun but seen some bad reviews about it. from your video the gun seems to work just fine
Was going to get this one at harbor freight but don't want to be adding water to the paint extra work & being the paint will break down sooner so I will be settling for the Wagner 2500 model which don't have to add water bit more money but will be worth the money.
Bought it to spray louvered closet doors. Sitting here watching this (making excuses, not getting it done.) 😁
LOL
So, I didn't have everything I needed for the proper setup. Could have used a mixing bucket to get my ratio right, but had to mix in the sprayer container. Mixed it way to watery. Had lots of over spray and and because it was so watery, runs.
I really didn't have time to figure it all out, so I just busted out the brush to clean up the runs and just continued to paint the rest with it. I'll take it home and play with it to get it right so I'm ready for the next time.
@@coachmattc We had done the same thing when we first got ours. That's why we put so much time into figuring out what it likes. The ratio seems to be the most important aspect of the whole exercise.
I purchased the same sprayer a few months ago...Just putting to use the measuring container will save time!! Thank You! God Bless
Big fan of harbor freight. For the correct application their DYI level products fit my budget well.
Good video,thanks
Great video big man , cheers
Great instructional video
New subscriber
Very informative. Thank
Great job
Thx for the demo!!
Im going to try and paint my little race car with this gun. Ill post a video when done thanks buddy.
If its a metal body, it might not atomize the paint enough for good results. I am interested to see none the less. My best results have been wood, drywall, cabinets and such.
Definitely worth your time to watch! Hit the thumbs up and learn about the basics of operating this product.
Great video thanks
Recommendations for cleaning my Avanti
Paint sprayer just like the one you have it has been setting in the box with dry paint in it for about a year now my helper never cleaned it. I’m disabled, and I hire him to do a job some good fast solutions, soapy water and a rag. Just don’t seem to do it. Thank you in advance.
To reduce viscosity I have had excellent results heating latex paints instead of thinning.
Thank you so much for information
Learned a lot from you
Great video just friendly input forward grab a cheap set of wireless mics to get better audio. Keep it up
Tks for the video
My standards could not get lower my friend
I think you are mixing up vertical and horizontal. A little hard to tell, but it seems like your buddy is moving horizontally side to side, but the dial is ==. And I think when you are spraying up and down the dial is ||. The Owner's Manual says to do the opposite.
Thank you very much for stating your24 ounce paint to 16 ounce water dilution. That should make it much easier to use compared to the 10% water suggested on other sites. It could also help make this affordable sprayer last much longer too. Once again, Thanks
yes it did help thank you
Do you happen to know the mix ratio for stain? I have behr waterproofing stain & sealer.
Thanks for such a great and thorough video! Def ready to use it now! 😃
I do not. We have never tried any stains. What I would do is use the viscosity measuring tool on the stain by itself first, just to see how thiccc it is. Then I would start with a small amount of the thinning agent and measure each time until I got the correct viscosity. i.e. start with 5oz of stain and add 1oz of thinning agent, then measure. Add another ounce of thinning agent if needed and then measure. Then when you find the desired viscosity, now it is easy to bump up your measurements with your new found ratio.
I found that for water based stain, a 6:1 ratio (6 parts stain/1 part water) worked great. Hope this helps!
Since your painting particle board it would be so much faster and a higher quality to just roll it...
love it!
I’ve been finding out most of the Turbine HVLP spray rigs work the same or very similiar the bigger differences i’ve found is Metal(aluminum) versus Plastic Construction i do personally prefer the Metal ones that are easier to Clean without damaging the surfaces i’m a retired ProfessionalWoodworker and in the past i’ve always used Compressed Air for Spraying although i’ve switched to the Turbine set ups for all my Paint and Finishing needs my unit is actually a older CampbellHausfeild Kit they don’t sell as a kit any longer one more thing almost all the Patents on Paint Sprayers and the Technology is now owned by the Wagner Corporation , who bought out many of the independent Companies over the years thanks for the video !
I didn't know that, this is the only one I have ever owned. An aluminum bodied sprayer with a replaceable or rebuildable motor
would be nice to own.
Consider getting the HomeRight Sprayer it is still cheap compared to the Wagner but, it has a metal tip.
avanti makes a good mini airgun compressor package also.
hmmmm My cap on the sprayer stuck to the container of paint after the first fill. Had to have my 28 year old nephew wrestle it open. . Possibly filled to much, could be water base paint dried too fast (maybe I was slow to paint), all the possibilities....not sure. By the end of the second empy - the cap would not come off. I did wipe the cap and container before starting again just to be sure I wouldn't have the same issue, but it was worse. My nephew could not get the cap off and my young mid thirties neighbor could not get the cap off the sprayer/container....LOL we are perplexed. Super sad as the results were great and I felt it was a simple sprayer to navigate.
love the video...what was the ratio for the paint to water?
Wafer board is like a sponge. It takes double the paint than most other surfaces.
👍 well done
Good stuff brotha
THANK YOU
Muy bueno
Where does the filter go. I don't see anything in the directions
Can you leave unused paint in the bottle until you have to use it again?
Why do you need to dilute the paint tho?
🤩