VW Tourareg V6 (2014) - P008700 Fuel System Pressure too Low

Поделиться
HTML-код

Комментарии • 33

  • @dathaiobardain1004
    @dathaiobardain1004 2 месяца назад

    Fantastic trick, thanks for sharing! Worked for me and saved me a lot of hassle and worry thinking it was the high pressure pump!

  • @sasalemo
    @sasalemo 2 года назад +1

    Thank you, the ball bearing trick worked for me. I was able to identify the faulty injector straight off the bat.

  • @kennedysgarage3281
    @kennedysgarage3281 2 года назад

    Good investigating Sandy, well done man 👏👏👍

  • @mikeberry304
    @mikeberry304 2 года назад

    Great diagnosis Sandy , scary moments when undoing the injector bolts on these , you cant beat the old ball bearing trick , but as you say scoping it would be nice to see , but fuel is so expensive, blanked off , saves fuel 😉🤣🤣👍👍

    • @sandyande
      @sandyande  2 года назад +1

      Haha how true save the fossil fuel😃

  • @mechanicmatt871
    @mechanicmatt871 2 года назад +1

    That's a good idea for testing with a scope. Cheers mate 👍

  • @carcranktime8313
    @carcranktime8313 2 года назад

    Good job. Ballbearings and leak-off are the best ways to go.
    That scope setup will never work in this situation.
    Ecu needs engine rpm to build desired fuel pressure to command injectors on. So the pressure is all over the place and there so there will no be an injector command or will here and there unclear....
    Good find
    Cheers!

    • @sandyande
      @sandyande  2 года назад

      Cheers my friend

    • @silkyg4064
      @silkyg4064 Год назад

      What's the process to find the faulty injector for a novice like me😊

  • @m4jo007
    @m4jo007 2 года назад +2

    interesting basicly same engine on Audi has 6Nm +90 Degrees on the stretch bolts

  • @mohammedwaheed9352
    @mohammedwaheed9352 Год назад

    Hello and thanks for sharing my friend that’s a good job for to identify single injector.
    How many injectors have you changed

  • @silkyg4064
    @silkyg4064 Год назад +1

    Sandy great helpful video got similar on Audi Q7 what size ball bearing did you use pls?

    • @sandyande
      @sandyande  Год назад +1

      Just from a bicycle

    • @silkyg4064
      @silkyg4064 Год назад

      @@sandyande thanks I'll give it a go👍🏼

  • @godwor848
    @godwor848 2 месяца назад

    What is the fuel normal pressure at idle ? I got a6 c7 3.0 tdi is a similar engine and show me 25 000 at idle ...

  • @casanovaevren
    @casanovaevren 2 месяца назад

    How do we know if the problem is the regulator or not?

  • @resadsubasic6788
    @resadsubasic6788 2 года назад

    Ove 4 sajbne,jesu podloske ili ves sta.

  • @sonofeire1916
    @sonofeire1916 2 года назад +1

    an injector going down will shut whole Bank off and not start blank off injector 1 by 1

  • @hi0896
    @hi0896 Год назад +1

    I have the same issue on Q5 fuel rail system too low , but i am not sure how do you diagnosis each injector is it possible to write it down the ball bearing trick procedure , my car can start up and drive normal only when i push the gas harder the error code came out

    • @markdaynard4036
      @markdaynard4036 Год назад

      Did you figure it out. I am having same issue. Only when pressing on accelator when driving that it is doing that

    • @radutrofin6918
      @radutrofin6918 7 месяцев назад

      Hi, do you figure it out?

  • @robertmobileman8304
    @robertmobileman8304 2 года назад +1

    what does' SWORD' mean in ya pid ? good diag

    • @sandyande
      @sandyande  2 года назад

      Hi Robert I've no idea, launch is painful with VAG

    • @jix177
      @jix177 2 года назад +2

      1:56 SWORD might be 'Short Word' meaning a 2 byte integer capable of representing a value from 0 to 65535.
      I also saw UBYTE on that screen which probably means 'Unsigned Byte' which could represent a value from 0 to 255.

    • @robertmobileman8304
      @robertmobileman8304 2 года назад

      @@jix177
      Nice one thanks

  • @fataniak
    @fataniak 2 года назад

    Hi Sandy, you mentioned the ball bearing trick in this video in order to diagnose which of the injectors is faulty. Would you be able to explain that in some more detail please for someone who’s not as mechanically inclined? Thanks in advance and awesome vids!

  • @markleonard4954
    @markleonard4954 2 года назад

    What size of ball bearing are you using?

    • @sandyande
      @sandyande  2 года назад +1

      No idea just took them from a bicycle back wheel😜

  • @paulrunell7821
    @paulrunell7821 2 года назад

    sandy the pakistan car doctor has put up you launch video