The 6.0 V12 TDI Engine is OUT... and Running!

Поделиться
HTML-код
  • Опубликовано: 10 сен 2024
  • Finally, we get the time to Play! Before removing the huge V12 engine from the Q7, Paul wanted to be sure what he needed to make the engine run without the rest of the car attached. It turned out to be a very simple job that meant we had the lump out very quickly and we could start planning its installation into our recently imported Single cab Amarok - • Our NEW Project!!! UK'...
    We plan to use the brakes from the Q7 and convert to a 6 speed Manual Gearbox so the project requires the help of Luke at @DieselPumpUK to come up with an adapter and flywheel for the T56 Magnum gearbox - • As if one V12 TDI wasn...
    Check out our full V12 playlist here:
    • Audi Q7 V12 TDI
    Single Cab Playlist:
    • Amarok Single Cab
    -----------------------------------------------------------------------------------------
    Camera Gear at the bottom. Scroll Down.
    Check out our full video archive: drksi.de/videos
    Please don't forget to subscribe to our RUclips Channel: drksi.de/YTSubs...
    Visit our website for more of what we do at www.darksidedev...
    We offer Bespoke Tuning Products, Custom ECU Mapping, Diagnostics, Servicing, Repairs as well as a wide range of New & Used Genuine and OEM quality parts.
    One of our main aims is to provide products that give the best performance gains, whilst still maintaining the reliability and economy associated with a diesel engine. As we only own and work with TDIs, you can be assured that you are dealing with experts who have an in depth knowledge and understanding of all things VW and BMW Diesel.
    Follow us here:
    LIKE us on Facebook: drksi.de/fb
    FOLLOW us on Twitter: drksi.de/twitter
    FOLLOW us on Instagram: drksi.de/insta
    FOLLOW us on Flickr: drksi.de/flickr
    +1 us on Google+: plus.google.co...
    See our online blog for guides, event coverage, advice and more: drksi.de/blog
    -----------------------------------------------------------------------------------------
    Camera Gear:
    Sony A7iii
    Samyang 24mm f2.8 (Vlog Lens)
    Samyang 35mm f1.4
    Tamron 28-75mm f2.8
    Rode Wireless Go Microphones
    Rode Lavalier Microphone
    DJI Mavic Mini Drone
    DJI Ronin-SC Gimbal
    GoPro 6 / 7 / 8 / 9
    Pixal G1S RGB Light
    Sony ICD-PX470 Audio Recorder

Комментарии • 112

  • @mattmanslim
    @mattmanslim 2 года назад +58

    That work on the wiring harness and getting it running without the immobiliser is a perfect demonstration of why you guys are the best in the business!

  • @otacon4065
    @otacon4065 2 года назад +6

    whoever labelled the windscreen is a legend and time saver. I was tempted to ask if it was reusable till I red it was cracked 😅

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад +1

      Make an offer, I'll be sure to write UN on it so it flies through the MOT

    • @otacon4065
      @otacon4065 2 года назад +3

      @@DarksideDevelopments sound mate, can you write not a decat on the decat pipe then the mot man will have to apologise?

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад +1

      Good thinking, yes!

    • @otacon4065
      @otacon4065 2 года назад +2

      @@DarksideDevelopments just cross out the 'not' where it says not for road use ;) how has no one thought of this?

  • @Icebuntrucker
    @Icebuntrucker 2 года назад +19

    Your episodes could never be to long , Keep them coming mate

  • @Timoastra
    @Timoastra 2 года назад +12

    "Called" it with the T56 Magnum. Really looking forward to following this project. I love these oddball engine and transmission swaps!

  • @RTC057
    @RTC057 2 года назад +4

    Paul needs to be promoted to hold company shares.....seems like he's a very valuable chap.

  • @Pan_Gotti
    @Pan_Gotti 2 года назад +6

    Would be cool to see this v12 stripped down to the absolute necessities and a couple turbos and downpipes see how it sounds.

  • @gafrers
    @gafrers 2 года назад +3

    Always great to see V12 in a Darkside Developments video. 👍👍

  • @clarksonisgod
    @clarksonisgod 2 года назад +4

    Can't wait to see more of this and the results of the amarok v12 tdi 😍🥰

  • @tobiasjacobsen_dk
    @tobiasjacobsen_dk 2 года назад +7

    Paul is a pretty good mechanic isn’t he !

  • @mynameisnotcory
    @mynameisnotcory 2 года назад +1

    Cant wait to show this build to all my truck friends here in usa

  • @timbo19751975
    @timbo19751975 2 года назад +3

    Hell that V12 is a monster

  • @yazctr
    @yazctr 2 года назад +3

    SOOOO excited to see this project!

  • @flippy9133
    @flippy9133 2 года назад +3

    wow it sounds so smooth for a diesel

  • @tommorides8086
    @tommorides8086 2 года назад +4

    Thats a big beast.

  • @99unclebob
    @99unclebob 2 года назад +4

    Ryan this is modern hot rodding at its best with a beast V12 diesel and T56 6 speed in a rear wheel drive Amarok ,this is going to be the most interesting build on RUclips for sometime to come looking forward to this superawesome build, i hope the rear diff in the Amarok is stout enough to handle the power or has said its prayers 😂

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад +3

      Ford 9" incoming!

    • @99unclebob
      @99unclebob 2 года назад +1

      @@DarksideDevelopments awesome choice, friends dad builds race engines for drag cars and recommends them more than any other and tons of parts available

  • @syncrosimon
    @syncrosimon 2 года назад +1

    Full respect for delving in so deep👍👍

  • @craiggreenhalgh1082
    @craiggreenhalgh1082 2 года назад +2

    That's One Big Old Lump🤔 💪💪

  • @thedetailingdoctor5746
    @thedetailingdoctor5746 2 года назад +2

    Can’t wait to see the big turbo packages you guys do on this platform.

  • @ballastmobill8549
    @ballastmobill8549 2 года назад +1

    The engine management is hell on the V12 ,i had have ecu's trouble with water ,2 years to repair the car ...here in Belgium 😅 now its ok but 🥵🥵🥵🥵🥵hard times passt ,
    Darkside power 💪

  • @ronniejarvis2679
    @ronniejarvis2679 2 года назад +2

    Outstanding work. Badass project

  • @finlay230
    @finlay230 2 года назад +1

    friggin love the update, if anyone looking for exhaust flexis like the one on engine, Darkside flexi are best out there

  • @CaptianInternet
    @CaptianInternet 7 месяцев назад +1

    Call me a weirdo. But this engine is so amazing.

  • @peterharrison4375
    @peterharrison4375 2 года назад +1

    Can't wait for the next installment, that's going to be an awesome truck 👌

  • @toeknee2u
    @toeknee2u 2 года назад +4

    How 'easy' was that! (Ok not...) But folks used to make more fuss pulling a pinto out of their Cortinas when I was a kid. I guess once you're past the electrics it's basically the same, only bigger 😳 Looking forward to the next installment.

  • @chrisp4899
    @chrisp4899 2 года назад +1

    That's one hell of a lump

  • @thedetailingdoctor5746
    @thedetailingdoctor5746 2 года назад +1

    That’s one quick engine removal lads! Keep it up 👍

  • @paulfeatherstone7095
    @paulfeatherstone7095 2 года назад +3

    Hello keep up the good work ! this is going to be an interesting build ! 👍

  • @TheNorthernmunky
    @TheNorthernmunky 2 года назад +2

    Gonna be awesome, please stick it in the back of an UP gti

  • @Taylor40667
    @Taylor40667 2 года назад +4

    Christmas day special…. 😜

  • @ProMilkshake
    @ProMilkshake 2 года назад +1

    Maybe the lifting eyes at the back of the engine makes sense when mated to the gearbox? Perhaps it'd be level if you lifted from there with the weight of the box at the back?

  • @thejoneseys
    @thejoneseys 2 года назад +8

    Damn that is one hell of a lump isn't it. Looks like a nightmare to work on when it's inside even a big bus like the Q7 😫 Double ECU so can't imagine the complexities of attempting to remap that. Still looking forward to the attempt to get that in the Amarok should make for great content. Can we have the bits left in when you'll be effing and just beep them out 😂😂😂😂

    • @soapmcsoapface1787
      @soapmcsoapface1787 2 года назад +2

      Pretty much any work you need to do on these the engine comes out. There is just zero chance of getting to things. Had a coworker do an oil cooler on one and it just looked like a pain. That was i think like 50-60k swedish kronor which is around 5-6k€

    • @75L48
      @75L48 Год назад

      complexities of a remap are flashing the same config into both ECUs... wouldn´t run otherwise.

  • @andyhunt457
    @andyhunt457 2 года назад +2

    That wiring is the stuff of nightmares 😆

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад

      It was fairly straightforward!

    • @andyhunt457
      @andyhunt457 2 года назад +2

      @@DarksideDevelopments Like a marathon is fairly straightforward...just one foot in front of the other 😂

  • @michaelbolton1090
    @michaelbolton1090 2 года назад +1

    That's a huge motor. It barely fits in the q7. Excited to see you squeeze it in to the single cab. Two ECUs? One per bank? Sounds like fun tuning that.

  • @lukasfrost1315
    @lukasfrost1315 2 года назад +6

    Reyt then

  • @catlee8064
    @catlee8064 2 года назад +4

    ......and going in the R8 ?
    Damn, going in the single cab ?

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад

      Unfortunately it would not fit in the R8 :(

    • @catlee8064
      @catlee8064 2 года назад

      @@DarksideDevelopments Yeah i should of thought the height/width of it would be too much, my bad !

  • @bill3021
    @bill3021 2 года назад +3

    Could you do a buyers guide to q7 I’ve looked at a few and some had ecu issues but nobody seems to have a clue what’s what and what symptoms are got give you lot 10/10 you live and breath the range

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад

      We don't get involved with those sort of issues so not the best to do such a video. Buy later and don't go for a silly low miler. Get something that has been maintained!

    • @bill3021
      @bill3021 2 года назад +1

      @@DarksideDevelopments no worries I’m looking at one at the moment said it just died on a 64 plate got people saying fuel others saying ecu think it’s best to put a vagcom on although he’s saying there’s no codes

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад

      No codes sounds odd.

  • @p1fly
    @p1fly 2 года назад +1

    Reyt then another top video

  • @gnar-ninja
    @gnar-ninja 2 года назад +1

    V12 q7 TDI manual are you kidding me?! 🥲

  • @TurboReplin
    @TurboReplin 2 года назад +2

    Please keep the Q7 brakes in the Amarok

  • @ebro8655
    @ebro8655 2 года назад +1

    ‘Cracked windscreen’ did you call auto glass ?

  • @abbzb2083
    @abbzb2083 2 года назад +2

    Not enough likes compared to the veiws ppl?? We know what we're getting when you come to the DarkSide and I love it. Nice1 lads 100% the best information I've found.. what can you do to my infiniti ex30d lads?

  • @danielmarshall4587
    @danielmarshall4587 2 года назад +1

    Oh those down pipes.............

  • @ballastmobill8549
    @ballastmobill8549 2 года назад +1

    Houuuu i would like make complete exhaust but the downpipe section was very difficult 😬 , with my hands i Can touch the turbo bride but ,see the way on your engine ...😳 Hmmm dpf out and replacement by tube is hard 🤔 ,i don't care my V12 will sing ! 😁

  • @malcolmbindon5911
    @malcolmbindon5911 2 года назад +1

    Instead of dimpling the exhaust tube to fit could you use oval tube to get volume area.
    Cheers

  • @flippy9133
    @flippy9133 2 года назад +4

    Is the amarok getting the carbon ceramics as well? 😁

  • @ballastmobill8549
    @ballastmobill8549 2 года назад +1

    Hooo i look the vidéo in bed , i'm curious because i have One Q7 V12 and i Know in future ,i will unfitt the engine out the Frame 😂

  • @ikeraiser266
    @ikeraiser266 Год назад +1

    would it be possible to engine swap 1 ton ford or chevy/gmc or Ram trucks engines and swap it with this audi engine

    • @DarksideDevelopments
      @DarksideDevelopments  Год назад

      It'll probably take a lot of work but i'm sure you could do it. Not something we have tried

  • @cwuzii
    @cwuzii 2 года назад +1

    Looks crazy complicated, you have a talented team! Realistically, how possible is it to put that in a mk1 golf? 🤔🤣

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад

      The golf would be 'on' the engine

    • @cwuzii
      @cwuzii 2 года назад +1

      @@DarksideDevelopments squeeze it in the boot and make it rwd 🤣

  • @rubenbraekman4515
    @rubenbraekman4515 2 года назад +2

    What a huge fat engine 😂 vw was really snorting cocain when they designed all this!

  • @novruzpasazade864
    @novruzpasazade864 2 года назад +2

    Hi.Can this engine be fitted to a sedan? For example: e class, 5 series, A5, etc.

  • @TheMegajr
    @TheMegajr 2 года назад +1

    Anychance to take away those ECUs and get a standalone to control all the cylinders?

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад +1

      Nothing can do all 12 together, we will learn more tuning with OEM

  • @UnProGaming
    @UnProGaming 2 года назад +2

    Any plans to upgrade turbos on the 4.2 tdi in the d4 a8 ?

  • @RoadRunnerMeep
    @RoadRunnerMeep 2 года назад +1

    ECU1, and ECU2..
    The fuck o.O

  • @GT320VLOGS
    @GT320VLOGS 2 года назад +3

    Whats your plans with this beast is the v10 touareg gonna get a brother for off roading

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад +1

      Single cab ;)

    • @GT320VLOGS
      @GT320VLOGS 2 года назад +1

      @@DarksideDevelopments happy days cant wait for the videos on it an i just bought the v6 touareg aswell

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад +1

      Wise choice!

    • @GT320VLOGS
      @GT320VLOGS 2 года назад +1

      You guys still have that first back box delete you did for the v10 or has it gone and will it fit the v6??

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад

      It sold ages ago, V6 is a different setup but we can make one!

  • @christopherbell7561
    @christopherbell7561 2 года назад +3

    2 ECUs, one a side?

  • @ElmerVr6t
    @ElmerVr6t 2 года назад +1

    i need a downpipe for a A4b9 2.0tdi but you havent one in your shop=(

  • @TumzDK
    @TumzDK 2 года назад +2

    How much does this engine weigh?(sorry for the spelling....)

  • @andyhunt457
    @andyhunt457 2 года назад +1

    I bid 49p for the cake 🎂 😆

  • @davidcochrane3671
    @davidcochrane3671 2 года назад +1

    What year Q7 is that guy and how much for both front strut assemblys

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад +1

      It's a 2010, please email with what do you need exactly, we are likely using the Q7 front hubs.

    • @davidcochrane3671
      @davidcochrane3671 2 года назад

      Both front air struts, left and right.
      What mileage was on the audi?

  • @bouncycastles1214
    @bouncycastles1214 2 года назад +1

    How much are you selling the rotten cake for?

  • @craigb4719
    @craigb4719 2 года назад +3

    Long videos are better

  • @hipphyseni0194
    @hipphyseni0194 2 года назад +1

    I like your vids but sometimes i cant see shit

  • @GETPHUCKED57
    @GETPHUCKED57 2 года назад +1

    So we're not getting the V12 Audi R8 TDI then why doesn't go to plan we need that UK's first Audi V12 R8 tho so scratch your head and your bullocks can come up with something 😁🤘🤟👌🤌☝️👏😁

    • @DarksideDevelopments
      @DarksideDevelopments  2 года назад +1

      This engine is way too tall for an R8

    • @GETPHUCKED57
      @GETPHUCKED57 2 года назад +1

      Will at least are we getting a PD TDI tho !!! 😁 R8 Lols for the jokes !!