DIY Fume Vent For The HotBox
HTML-код
- Опубликовано: 1 окт 2024
- Print and assemble this DIY Exhaust Fan to use on any FDM or Resin version of the Wham Bam HotBox 3d printer enclosure: whambam3d.com/...
Download the DIY Fume Vent parts and plans here:
cults3d.com/en...
See the assembled vent in action:
• Wham Bam DIY Fume Vent...
You will need these printable parts:
° Front_housing.stl
° Back_housing.stl
° Washer.stl
° LockNut.stl
As well as these purchased parts:
° 4 pcs M3 x 24 screws www.amazon.com...
° 2 pcs M3 x 6 screws or small wood screws to attach front housing to Back Housing
° 1 pc 12V 60x60x25 fan www.amazon.com...
° 1pc variable 12V DC transformer: www.amazon.com...
° 1pc Vacuum hose and attachment set: www.amazon.com...
° Heat shrink wire connectors: www.amazon.com...
3D PRINTING SETTINGS:
-Layer Height 0.2
-Supports from bed
-Orientation for housing part open side on the bed
Where to find us online:
www.WhamBamSys...
/ whambamsystems
/ whambamsystems
/ whambamsystems
/ 35445851
/ whambamsystems
/ whambamsystems
Kick Shock by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommon...
Source: incompetech.com...
Artist: incompetech.com/
Very interesting. Part list / links?
You can download the DIY Fume Vent parts and plans here:
cults3d.com/en/3d-model/tool/wham-bam-exhaust-fan-for-resin-hotbox